Ubuntu Multimedia :: ASROCK 330 ION And GeForce 7300GS - Lspci Cannot Detect Both?

Jul 7, 2010

I installed a secondary Nvidia GeForce7300GS 256 PCIe video card in an ASROCK ION 330 motherboard. The idea is to provide an S-video output. The interesting bit is that lspci shows only one of the two cards. If I set the ION video adaptor primary in BIOS, then lspci will detect only ION, if I set the PCIe video card then lspci will detect the GeForce 7300GS. I'd like to write my own xorg.conf, but how can I refer to drivers without the pci bus address?

View 2 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Use Lsusb And Lspci To Detect Webcam ?

Jun 23, 2010

I a m using a logitech c250 and it works perfectly on ekiga when i use ekiga i get video and the little green indicator turns on but I really want to use the webcam for stickam and the minute i turn Ekiga off the indicator goes grey and it stopps working i've used to codes, lsusb and lspci to detect my webcam and it they worked but my problem still isnt fixed.

View 4 Replies View Related

Fedora Hardware :: Lspci And Hardinfo Don't Detect Any Wireless Card

Mar 13, 2011

My laptop is supposed to have a 802.11 a/b/g/n wireless network card, but I can't find it. I've run lspci -nn without seeing anything containing. 802.11 in the output. Moreover, when I look into hardinfo->network->interfaces I only find the wired connection. Could anyone please tell me if these programs find all devices or if there could still be a wireless card here?

View 3 Replies View Related

Fedora Hardware :: GeForce 9600M GT, Nvidia-settings Does Not Detect LG E2250V Resolutions?

Feb 3, 2011

I just bought an LG E2250V Monitor that I'm connecting to my laptop with the VGA port, my laptop is equipped with the cardCode:01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)However nvidia-setting is able to detect resolution only up to 1024x768, I can't get higher than that, and it doesn't even display the monitors name.Information:

Operating System: Linux 2.6.35.10-74.fc14.x86_64
NVIDIA Driver Version: 260.19.29
Server Version Number: 11.0

[code]....

View 4 Replies View Related

Ubuntu Multimedia :: Alsamixer Not Working - ASROCK CORE 100HT

Sep 11, 2010

i just bought a ASROCK core 100ht and installed ubuntu 10.04.

My speakers and headphone works fine but my microphone is not working, a common problem. Usually i solve it through alsamixer. However my Alsamixer shows only " Master PCM S/PDIF Capture " (see pic)! And no microphone option. Does anyone knows what is going on?

these are few of my outputs :

francesco@checco:~$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfbcf0000 irq 22
francesco@checco:~$ amixer
Simple mixer control 'Master',0

[Code]....

View 3 Replies View Related

Ubuntu Multimedia :: LSPCI Reports Wrong Video RAM Size

Jun 11, 2010

I am running ubuntu 10.04 with the fglrx driver installed with apt-get. I have an ATI Radeon HD AGP with 512MB of video ram. My bios window size is 64MB. The Xorg.0.log file shows that 512MB is recognized. I also tried checking the /proc/mtrr file and it shows two values one I believe is my ram size which looks to be correct at 1.5GB the other is 512MB which I think is my video ram size, but when I do an lspci -v the video ram size shows 256MB. I am trying to run Doom 3 and it only allows me to use 256MB of memory.

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux Merlin 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=b72f83f8-a868-4098-9d87-2a082f698167 ro quiet splash
Build Date: 23 April 2010 05:11:50PM .....

View 2 Replies View Related

Ubuntu Multimedia :: No Sound - Aplay Gives Nothing - Lspci Shows Soundcard

Apr 4, 2011

I have had on and off problems with my sound for quite some time now. Each time it would stop working, I would find a fix which would work for a month or so, then I would go back to having no sound. I have had consistent sound on my Windows partition, so I don't think something is wrong with the hardware. The first fix I used was using "sudo alsa force-reload" to get ALSA working again. The latest fix I used was to add the line "options snd-hda-intel model=toshiba" to alsa-base.conf, which worked up until now. My built-in computer speakers won't make any sound, nor will my external monitors when they are plugged into the headphone jack. I do get sound when I plug in a pair of USB headphones.

I have tried using the Comprehensive Sound Problem Solution Guide [url], but I run into a predicament...

aplay -l (with or without being root) gives...

Code:

Code:

Alsamixer isn't much help either. It shows the name of my card in the top left, but there are no sliders to adjust.

I've tried compiling the modules from source, reinstalling through Synaptic, and plenty of other things, to no avail. Ubuntu 10.04 on a Toshiba Satellite U305-S5107

View 9 Replies View Related

OpenSUSE Multimedia :: Sound Too Silent On Asrock N68C-S UCC Motherboard?

May 7, 2011

I tried to listen mp3 on in, but it was too silent (of course, I tried to put speakers to be louder).. I switched to winXP (as a second OS) on this computer, and sound volume is ok, so I suppose it's problem in OpenSuse... I have ASROCK N68C-S UCC motherboard with nForce 630a sound chip on it.

View 2 Replies View Related

OpenSUSE Multimedia :: Sounds Mutes / Unmutes Continuously On ASRock M3A770DE

Aug 22, 2010

My sound keeps going on and off, with some variation but generally about twice a second. I can watch the speaker icon in the system tray with a red x appearing and going away. When I play anything the sound is very broken. I'm running on an ASRock M3A770DE uploaded my ALSA information: [URL]. I've tried a number of things to attempt to correct the problem, but nothing I've tried makes any difference.

This MB does have two separate sound devices, I think. This shows up in YAST/Hardware/Sound with one entry as "ATI Technologies Inc." and the other as "SBx00 Azalia (Intel HDA)". I've tried disabling each one separately, but that doesn't seem to make any difference. The description of the board says it has "7.1 CH Windows Vista, Premium Level HD Audio (VIA VT1708S Audio Codec)". I don't run Windows except in VMs, so I don't know what happens with this in Windows.

View 7 Replies View Related

Debian Multimedia :: XOrg Auto-detect Failing To Detect Max Screen Resolution

May 29, 2011

I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.

Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.

When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?

View 6 Replies View Related

Fedora :: Hardware - GeForce 4 MX440 Vs GeForce FX5200

Aug 28, 2010

Today I received as a gift a 5 years old Gateway 500X CPU which is apparently dead due to a faulty motherboard (I still have to troubleshoot it, of course).

Even in the cause I can fix it, odds are I'll prefer to make the aforementioned CPU a donor for my other machines, instead of resurrecting an old Pentium 4 (no HT) system.

Being this the case I checked the parts for possible transplants:

512MB DDR PC2700 memory module (useful right off the shelf for my main desktop system).
120GB Maxtor IDE hard drive (also useful, assuming it is in working order).
128MB AGP8X NVIDIA GeForce4 MX440 graphics card.

On this last part (the graphics card) I have my doubts as of where to use it. My main desktop system already has an NVIDIA card: FX5200, 128MB, which is newer. The thing is that I've been doing some homework comparing both the MX440 and the FX5200 and get mixed opinions: for one thing the FX5200 is the latest of the two with some advantages like support for a later DirectX (which for Linux is pointless) and other things, but the FX5200 is also reported to be technically inferior to the MX440.

In your opinion/experience which card is a better performer? Should I expect a performance gain if I were to replace the FX5200 with the MX440?

View 4 Replies View Related

Ubuntu Multimedia :: Getting GLX To Work On Geforce 220 Gt?

Oct 11, 2010

I recently bought a new geforce 220 gt and I'm using ubuntu 10.04 with the proprietary driver. I can't get access to the nvidia-glx program through nvidia-glx-185 because my card needs nvidia-glx-195 and the launchpad repo that supplied that deb has now removed it.
My question is would it just be easier to the the open source nouveau driver for nvidia so I can enabled 3d acceleration? Or will I probably run into the same problems trying to get glx working with that driver?

View 1 Replies View Related

Ubuntu Multimedia :: GeForce 7600 GS - How To Connect TV

Jan 28, 2010

I am using GeForce 7600 GS. Not using the Nvidia X driver message you know... I searched all over, and seen this problem on many searches but no resolve issues. I want to be able to connect my tv, I use to be able to when I first installed Ubuntu and now IdK. Using GLX-185 btw too

View 5 Replies View Related

Ubuntu Multimedia :: 10.04 And Nvidia GeForce 210 - Cannot Recognize The Card

May 6, 2010

I cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.

If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.

View 3 Replies View Related

Ubuntu Multimedia :: No HDMI Output On 11.04 NVidia GeForce GTX 465?

Jul 30, 2011

I've seen a lot of threads on this issue and combed through most of them trying to diagnose my problem and I've gotten REALLY close but with no complete success yet.I have a nVidia GeForce GTX 465 and I'm running HDMI out to my monitor. I have video but no audio. I can see the device in the Hardware tab of Sound Preferences but for the life of me I can't get it to play any audio (aside from testing with white noise).Output from aplay -l:

Code:
*** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]

[code]....

View 2 Replies View Related

Ubuntu Multimedia :: Adding Nvidia GeForce 210 Video Card?

Jan 5, 2010

I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:

Section"Driver"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section"Monitor"
Identifier "Configured Monitor"
EndSection

[Code]...

I tried changing the driver from "vesa" to "nv" without any effect. Does anyone have any idea what I should do to get this to work?

View 9 Replies View Related

Ubuntu Multimedia :: Can't Get Direct Rendering On Nvidia Geforce 6200

Feb 25, 2010

On Karmic, Nvidia Geforce 6200 and nvidia drivers v. 185, I can't get direct rendering (neither user nor root):

Code:
glxinfo | grep direct
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)

[Code].....

View 1 Replies View Related

Ubuntu Multimedia :: Nvidia GeForce 6800 No TV Detected Via S-Video

May 21, 2010

I have thrown together a frankenstein of spare parts to stream video onto my TV. The GPU is a NX6800GS (geforce 6800). I have used the restricted driver tool to intsal the recommended driver. The VGA output works fine. My problem is that when using the nvidia tool to set up my TV through S-Video on the graphics card, the TV is not detected. This puts me at a dead end, as every how to guide on this forum assumes the nvidia control panel can detect the TV. Can i force video to play over the S-Video port? Do i need some magical unicorn drivers for the card? Any help is appreciated (even a simple "this setup will never work").

View 9 Replies View Related

Ubuntu Multimedia :: Finding A Driver For Nvidia's GeForce GT 440 1GB Card?

Mar 11, 2011

anyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.

View 5 Replies View Related

Ubuntu Multimedia :: Unable To Use Nvidia GeForce 8200 Driver On 11.04?

May 28, 2011

I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:

$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found

I was not able to install the package.

$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig

[code].......

View 9 Replies View Related

Ubuntu Multimedia :: Upgrading Graphics To GeForce 8400 - Simple Upgrade Or Not?

May 24, 2010

Sick and tired of sluggish performance using the onboard X1200 graphics so I just ordered a cheap GeForce 8400 with 256MB DDR2 memory. If I simply disable the on board graphics then plug the GeForce card in, will I have to re-install Ubuntu or will the system be clever enough to detect and configure the card for me?

View 4 Replies View Related

Ubuntu Multimedia :: Horizontal White Lines Using Nouveau & GeForce 7300 GS

Aug 21, 2010

I've just done a clean install of 10.04.01 (64bit) and am having a few issues with the Nouveau driver.

1. I'm getting a series of horizontal lines across the screen ( image).

2. I'm getting, what appear to be, GPU lockups. This appears to happen after an amount of browsing and rendering images.

My system setup is:

10.04.01 LTS
grep 'Monitor name' /var/log/Xorg.0.log
(II) NOUVEAU(0): Monitor name: EA231WMi

VGA compatible controller: nVidia Corporation G71 [GeForce 7300 GS] (rev a1)

View 2 Replies View Related

Ubuntu Multimedia :: Frame Tear On Intel HD GMA And NVidia GeForce 310M?

Jul 25, 2011

I bought an asus U33JC and except for one major issue (frame tear) it works fine out of the box using 11.04 64bit, with some minor issues easily solved (suspend, upside down cam on skype, flash and java). The U33JC has optimus, but also a bios option to disable the Intel GMA. So I could use the on chip Intel GMA or disable it and use the discrete GF310M.

The major issue I have now is poor video playback. Frame tear occurs in every single configuration I tried: Either using the internal Intel GMA, or disabling the Intel via bios option and using the NVidia proprietary drivers or even using bumblebee. This frame tear occurs also on the desktop, but the real problem is that it's very noticeable on video, specially when connecting my HD TV via HDMI. I tested 720p h264 mkv videos and even low res xvid avis in totem and mplayer/Smplayer all equally poor. Using mplayer I tried several vo options, such as xv (intel? xv) and x11, and playback is poor on all of them. Oh, and I don't use compiz (don't care for it). Refresh rate is 60Hz, and should be the right one. It works fine with vlc on the soon to be transformed into free space windows7, but that's not an option for me. I used Ubuntu before on a laptop, but I usually use Gentoo, so I'm not familiar with the ubuntu distro.

The purpose of this laptop was to be my "tv media center" when at home and my work laptop for travelling (13 inch ! ). But it failed miserably on the first count. I'm still using my old celeron based Gentoo laptop with RGB out to my tv for that, still with much better results (it can decode only up to 720p, which is fine). But it is dying! I really don't understand why playback is so poor. Could messing with xconf be the answer?

EDIT: Here's my xorg log. NO VSYNC? Is this right? Please help.

Code:
[ 20.743]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 20.743] X Protocol Version 11, Revision 0
code....

View 3 Replies View Related

Debian Multimedia :: Geforce 2 In G4 Only Displays 1024x768 With Few Colors?

Sep 9, 2011

I decided to install Debian on my Power Mac G4 (Digital Audio). Everything worked, but the default GeForce 2 only worked at 1024x768 at few colors. Is there any way to fix this?

View 1 Replies View Related

Ubuntu Multimedia :: NVidia G92 - GeForce 8800 GT Graphics Card Is Not Fully Functioning

Jan 25, 2010

I already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.

The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:

Graphics Card: nVidia G92, GeForce 8800 GT
System: Ubuntu 9.10 Karmic, 2.6.31-17-generic, 4.4.1 (x86_64-linux-gnu)
Processor: AMD Athlon 64 X2 Dual Core 4200+ (3 Gigs RAM)

We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.

[Code]..

View 9 Replies View Related

Ubuntu Multimedia :: NVIDIA Geforce GT240 10.04 - Maximize Video Cards Capabilities?

May 6, 2010

I recently upgraded to Lucid from Karmic and shortly before the release upgraded from a geforce 8400gs to my geforce GT240 and noticed no difference on Karmic. I read somewhere that the capability of video cards would be applied further with Lucid. Since installing Lucid I've noticed a severely reduced sharpness and severely increased contrast, changing the contrast in X server has no effect. My hardware driver is activated but not in use and no online fix I've attempted has been successful in resolving the issue. Is it possible to use a gt240 on lucid with no hassle and is there any way I can maximize my video cards capabilities?

View 2 Replies View Related

Ubuntu Multimedia :: Geforce 8300 - Pentium Duo And Can't Play Nexuiz Or Urban Terror?

Aug 6, 2010

i have tons of computers running and my best one cant play the oldest games. My old P3 can play these games and this computer cant.

[Code]....

So basically a 2GHz machine with 2Gigs of ram and a Geforce 8300. I'm running Ubuntu 9.04 (jaunty i think ?). Anyway all of the basic games dont work well, they are choppy and slow. I put them in the lowest resolution just for them to be playable. It does not make any sense to me I have the latest version of the nvidia drivers running (I used ./NVI... --update)

[Code]....

This program is used to configure the NVIDIA Linux graphics driver. Copyright (C) 2004 - 2010 NVIDIA Corporation. The only thing I can think of is a crappy video card ? but still i should be able to run these old games.

View 6 Replies View Related

Ubuntu Multimedia :: Screen Resolution Stuck At 1024x768 - NVidia GeForce 7100

Sep 16, 2010

I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.

Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"
[Code]...

Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.

View 9 Replies View Related

Ubuntu Multimedia :: NVIDIA GeForce FX 5500 Driver Install Failed On Maverick

Oct 13, 2010

tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.

View 3 Replies View Related

Ubuntu Multimedia :: GeForce 8400 GS + 10.10 - Screen Image Extrapolating The Display Boundaries

Nov 23, 2010

I have just installed a GeForce 8400 GS card in my Ubuntu 10.10 with the Nvidia proprietary driver( version number: 260.19.21).

The Display is connected to the desktop through an HDMI cable and the resolution is 1920 x 1080 .

After some trouble(Black Screens), almost everything is ok.

The only problem is the screen that is extrapolating the Display Boundaries.

I have tried to set it through the nvidia configuration program without success.

Is there any parameter in Xorg.conf that could resolve this issue?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved