Ubuntu :: Led Zeppelin CD's Are Distorted When Played / Ripped - Copy Protected?
Sep 1, 2011
I'm trying to rip Led Zeppelin 2-4 & Physical Graffiti to FLAC's using Banshee, but they come out distorted. Turns out even playing the CD in Movie Player or VLC gives distortion. I suspect this is due to copy protection, since I don't have problems with my other CD's. Reading around, it seems Warner was implementing copy protection around the time I bought them.
Is there a way to find out if this is the case or bypass this? They play fine in another PC running Windows 7.
I never had this problem with mint 8 but now I run Ubuntu 9.10 and I have installed all the non-free codecs and non-restricted packages I could find, but still can't play them, I am no expert in the command line, but have been using linux distros for a few years
I like to make iso backups of my disc. I was going through some game cds that I have not backed up yet. I want to stress I DO OWN THE DISC. I just want to make an iso backup of the disc just in case something happens to them.
I normally use dd to backup my disc to an iso. Typically I use this command
I always replace the numbers for count with whatever the volume size is when i run isoinfo -d -i /dev/sr0. However I have a few game cds that I can not back up. I have tried 3 different disk that have this issue. I think they are all copy protected.
I am trying to backup the following disc:
Microsoft Rise of Nations Sid Meier's Civilization 4 Warlords Microsoft Empire Earth 3
When I dd any of these disc I get an iso that is 1.7GB and is not a valid iso image.
I was however able to back up other disc. How can I make an iso backup of the copy protected disc?
I would like to stress I do not condone pirating and I understand that some people may think this post is related to piracy. I simply want to make a backup of a disc that I have legally purchased
I have a brand new 3CD opera and two of the tracks on the last CD will not rip. I have tried on two different machines with the same result. (Grip/cdparanoia) The tracks appear to play OK on CD player. Any solutions available? Can I return disks as faulty?
I have this project for my operating systems class and I have put together the basic flow chart to aid me in writing the program. I know how to use pipes as a buffer to hold info. I know how to create a binary semaphore. But what I dont know is this:
How to "use a delay adjustment parameter K in the critical section to adjust the speed of the display process to show that without semaphore protection the displayed contents of the buffer are randomly interleaved."
First off, I am definitely not asking anyone to give me the solution. But I do need some guidance. So I figure there will be an if statement with two options:
1. If true, use semaphore protection to enter/exit critical section
2. If false, no semaphore protection -- this is where the contents of the buffer should be interleaved.
Now does that mean that as each child process enters the non-protected critical section, it should "sleep" for a randomized time? I mean, will this allow my output to be interleaved?
So lets say my command line looks like this:
what happens to the 100? Is it randomized using rand and srand and passed as a parameter to sleep() inside the critcal section?
so i have a promotion audio cd from 2008 and i simply cannot rip it it is copy protected i simply want to copy it to my computer but whatever is in there does not allow me to i have tried
[code]....
can see i have used quite a few of the heavy guns any of those would work to rip any other audio cd i think here i need some űbernerd expertise ok it tells me there are no audio tracks on the disc which of course is not true as it plays in my stereo it pretends to be a data disc but is not
I ripped 2 music CDs for a total of 78 minutes, but K3b won't burn them to a blank CD-R. It says the free space in temporary folder is 615.5 MB, but the size of project is 691.5 MB. I don't know why the tmp directory is that small when I have 615 GB free on my filesystem. When I start the burn, it simply says copying, but nothing shows up in the progress bars. I am able to burn direct copies of CDs, however. After a couple of tries and a couple of successful burns of entire CDs, I tried again, and it crashed.
I can rip songs from a cd in Rhythmbox and it will build all the folders with artist, album and songs in my Music folder, but when I go to Rhythmbox, everything is listed as unknown.If I look at a single song and look at the properties, the last tab called Audio lists everything as unknown.It seems like Rhythmbox is missing a step when it rips songs off a cd, like it is not applying tags? or something.
I've recently re-installed my operating system after a system problem. I am running F14 and Rhythmbox 0.13.2. I had all my music files backed up and have copied all the all the backed up files to /home/Music. I also ripped four CDs today and put them in the same folder. Then I started Rhythmbox and went to import the /Music folder for the first time since the new install.
The only folders imported from the Music folder were the files from the four CDs I ripped today. It would not import any of the other subfolders or files. The new files were ogg format and that is what most of the non-imported files were. I tried importing the Music folder with Amorok and it worked fine so there files seem to be OK. Any idea why it isn't working in Rhythmbox?
Has anyone else noticed an increase in file size of ripped CD tracks to MP3 between previous releases of Ubuntu and Karmic? Specifically using the same Gstreamer pipeline settings the file size in Karmic is now considerably larger than in previous releases like Jaunty or Intrepid. Is there a fix for this bug. Seems like Sound Juicer/Rhythmbox have some significant bugs in Karmic!
Hello. I use dvd::rip 0.98.10 to create .wav sound files from DVDs and then play them in Totem Movie Player 2.28.2 (using GStreamer 0.10.25) mainly because I like the visualizations. It always used to work, but a recent batch will not play. I get: GStreamer encountered a general stream error. I probably used a more recent version of dvd::rip for the ones which don't play. Both MPlayer and VLC Media player plays them without a problem and older rips play fine in Totem too. The Audio/Video properties of a 'faulty' file (as shown in Nautilus) are greyed out for codec, channels etc., whereas a 'good' file shows Audio properties as Uncompressed 16-bit PCM audio etc., but running soxi on a good or bad file gives the same (good) results. I'd like to get this working, without doing anything to the .wavs preferably, so I guess I need to do something to Gstreamer, but I'm really not sure how to proceed. I'm using Linux Mint 8 64bit (rt kernel) and very nice it is too.
When ever I play any sound, It 'pops' at the beginning. These pops could be split seconds of no sound, actual popping sounds, or clicking. I'm thinking its Pulse Audio.
i own toshiba satellite a660 laptop. A fresh install of ubuntu 10.10 works great, but i have a sound problem. Sound only works with headphones. No sound is played through speakers.What should i do?Install any third-party driver?
All my music is already synced, but every time a song finishes playing in Banshee, a notify OSD message appears letting me know that song is being uploaded to my Ubuntu One account. I'm running Ubuntu 11.04 32 bit.
I decided to take the plunge and I totally replaced windows XP Pro w/ Karmic. I'm working on getting theatre mode set up as well as syncing my iphone.
for this problem I've set up dual desktop mode(both with the guide I found for Nvidia, and with ATI Catalyst control center) through the guide, the computer would freeze randomly and with CCC it seems to freeze when I start a video on the TV display.
I'm running a P4 3.2Ghz, 4G DDR2, ATI 256mb card w/ HDMI out
UPDATE: By changing the screen effects to none the computer doesn't freeze anymore
Sometimes (quite frequently) during the normal use of my laptop (64bit Ubuntu 9.10), if I do not play songs nor anything else, I get annoying sounds, like when guitarists cable their instruments while ampli are on.Apparently this happens particularly when I open new windows or new tabs in my browser, when I shut down my pc, etc...
i dont know what has happened but my smplayer gets stuck when i play any kind of mkv file.. it was working file til yesterday, and today, i had to restart my computer manually 10-15 times! heres the log for smplayer :
I would like sound from mono sources to play in both speakers/earphones. How do I do this? Currently, it plays in only one side (which makes for an odd listening experience).I generally use banshee to play sound.
When I am playing music from my iphone through rhythmbox the iphone syncs at the beginning of every song. I dont know why it would need to do that? I have taken a look at settings and nothing really related.
I have 13.0 installed, everthing works OKI installed 13.1 on a separate partition, and dualbootWhen I use 13.1, there is a problem with sound.It's like in the old days when yu played an LP with a scratch, the track keeps repeating.When I move the mouse, sound will continue OK for a few seconds, then same problem.There is no difference, if I use KDE, XFCE, or just boot in runlevel 3 and use the command lineOnly thing I can find in the logs:Quote: May 28 06:37:10 cannabis kernel: hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.In 13.0, there is not such a line in the logs.Some info:Quote:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Fujitsu Technology Solutions Device 1107 Flags: bus master, fast devsel, latency 0, IRQ 22
I decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.
Some specs : OS version : Debian 7 (Wheezy) Laptop brand : Packerd Bell Easynote LJ-65 Kernel installed : 2.6.38-2-686 (Standard one in wheezy)
I have installed Windows7,and Redhat9 next installed but set as default.Problems:- Sound card is not detected using sound card detector.(I faced no such problem when i had installed Fedora3,and Fedora11) -Modem is not detected too when querying modem. -Could not find in PC (when Fedora was installed)or find and download needed codec packs and plugins so nearly most media could not be played.
Recently my firefox 3.0 browser keeps crashing sometimes when I play flash media. I have googled this issue but there is no clear answer as such why it happens and whats the remedy. So here I am. I ran firefox from terminal and here is the output
recently i installed ubuntu (gnome) 10.10. i'm lovin it but only thing is bugging me is this annoying noise whenever i try to see a video on web or using vlc. i m using dell inspiron 6400. IT has VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 My glxinfo outcome is :
HTML Code:
name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI
[code]...
now my main problem is whenever i change my visual settings from none to extra , i start getting noise on my usb headphone or even on my speakers especially if i play a video on full screen mode it become worse .. it starts constantly makeing buzzing noise. sometimes even when i minimize or maximize or scroll up down a window...
if i put the visual effects in normal mode i still get the noise on video playing full-screen mood but this is time bit low and on none mode i get the noise too but very low... so i m assuming there must be some problem with my vga card which is causing this chaos. unfortunately there is no driver for my graphics card dat ati supports on ubuntu, so i used gallium 3d project using this ppa https://launchpad.net/~xorg-edgers/+archive/radeon .. graphics works fine now but this nosie is killing me ..
I'm having an issue with my display. Every few minutes or so it dims and a 4 note chord is played.
I have isolated it to: "new-host-5org.kde.powerdevil.backlighthelperQDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave".
And it most certainly is misbehaving. I'm running Jessie 8.2 with the KDE desktop on a HP Elitebook 8730w with NVIDIA Quadro G94GLM graphics.
