Ubuntu :: Kodak 5300 Found But Not Printing
Jul 19, 2010
I bought a Kodak 5300 printer/scanner a year and a half ago and then found that it would not work under 9.04. So I packed it away. Now I find reports on this website that it can be made to function properly on Lucid Lucy.
I find references to the printer all over the place, but when I try to print something nothing happens. I tried the print routine in 'gimp', 'gedit', 'thunderbird, and 'firefox'.The printer as a stand alone will copy and scan. About a year and a half ago it was connected to a Windows machine and worked.The Samsung you see works just fine.
View 2 Replies
ADVERTISEMENT
Jul 20, 2010
This probably way TOO much information. Sorry for the long post. I bought a Kodak 5300 printer/scanner a year and a half or so ago and then found that it would not work under ubuntu 9.04. So I packed it away. Now I find reports on several websites that it can be made to function properly with ubuntu 10-4 Lucid Lynx. I downloaded and installed the recommended driver - c2esp. [URL]...
Quote:
dave@dave:~$ dmesg | tail -n 14
[ 43.353990] EXT3 FS on sdb1, internal journal
[ 43.354009] EXT3-fs: mounted filesystem with ordered data mode.
[12885.576042] usb 1-8: new high speed USB device using ehci_hcd and address 5
[12885.720095] usb 1-8: configuration #1 chosen from 1 choice
[12885.730916] usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x040A pid 0x4026
[Code]....
I find references to the printer all over the place, but when I try to print something nothing happens. I tried the print routine in 'gimp', 'gedit', 'thunderbird, and 'firefox'. The printer as a stand alone will copy and scan. About a year and a half ago it was connected to a Windows machine and worked.
View 4 Replies
View Related
Feb 14, 2011
I have been trying to find out if there is a driver I can install for my Kodak 5300 aio printer, but the only thread I can find is from 2007, which basically says it's MIA.
Does anyone know if there is one now or not?
View 2 Replies
View Related
Apr 21, 2011
I an an HP Pavillion laptop with SuSE 11.4. I had 11.3 working but I had to upgrade (install, not update due to other issues).
Now, when I go to YAST2 ->Hardware->printer->Print via network->Connection Wizard-> TCP Port and set the IP address and hit TEST CONNECTION I get an "OK". I select "Kodak" as the printer manufacturer and get these as my driver choices.
It uses port 9100 which looks open. I pick one driver and YAST creates the config. I then hit "Print test page" and nothing happens. This happens with either driver and a couple I downloaded from who knows where.
The printer is a Kodak ESP 5210 that runs with Windows 7 and Vista on the same network. Any ideas? Any tools I can use to sniff it out? I dropped the firewall to no avail, moved to the internal zone, no joy. It worked under 11.3 but I did not record the configuration steps or setup.
View 1 Replies
View Related
Sep 7, 2011
Strangest thing happened today. I tried to print a simple text document from Kwrite and noticed it would not print. I tried it again selecting a different printer. No result. I tried copying the contents and pasting into Libre Office, then print...no printers to select...Odd. I decided to check on cupsd status from CLI. It was up. Here's where things get stranger. I open CUPS web manager and select printers...'No printers found' Okay, that's odd since I should have about 12, and they are showing up in Kwrite but not in LibreOffice nor CUPS manager.
Assuming Kwrite used some sort of cache I decided to check out /etc/cups/printers.conf....Hmmm zero byte file with but in the same directory a file printers.conf.O dated about 7 days ago. So I did an /etc/init.d/cups stop, did a cat printers.conf.O > printers.conf and /et c/init.d/cups start...all is back to normal. WTH?! What waxed all of my printers?
View 1 Replies
View Related
Oct 1, 2010
I have recently installed Fedora 13 dual booted with windows 7. Everything on both OS's works fine with the exception of Linux printing. I am using a Netgear WGPS606 print server. (it works fine on Windows 7). I have, from Linux pinged the server (192.168.1.200) and have gotten a response for each string sent but following the usual procedure [System-Administration-Printing then Add (a printer)- Expand Network Printer etc.] The response is that there is no printer found at that address. (the firewall was disabled).
View 4 Replies
View Related
May 30, 2011
This printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.
Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm
View 14 Replies
View Related
Jun 7, 2010
Suse is 11.1 or maybe 11.2 (btw, how to see the version?) Printer is HP Deskjet 2468 belongs to the 2400 series
I connected the usb ,and Copmuter -> Printing -> New Printer Auto find it and install the driver
Now I can see it but it would not print a test page
I have not a lp group from the YaST -> User and Group Management
View 9 Replies
View Related
May 23, 2010
I'm thinking of buying one of the above as the HP 750 PCS I have hooked up to the wife's iMac is getting long in the tooth and is NOT well supported my Apple! It will either print or scan but not both without rebooting between tasks.One of the attractions of the Kodak is the cheap cost of ownership and they appear to be supported my Apple so that would be good! But what about Ubuntu support as a network printer?
View 1 Replies
View Related
Oct 21, 2010
I went to the Kodak website to see if I can download Kodak ESP 3200 series for Ubuntu, but it only has them for windows and MAC is there a way around this other than using VBOX?
View 2 Replies
View Related
Jan 27, 2011
I am trying to install a Kodak Printer to my Ubuntu10. Only to be informed that the CD autorun is not supported in files, I have the printer installed on the windows OS, without any problems, I have explored the CD and even tried setup but with no joy.Has any member encountered similar probs with installing software.
View 4 Replies
View Related
Nov 21, 2010
I swapped the wireless card in my m6400 from a Dell 1510 (Broadcom) to an Intel 5300 and I am trying to get it working. Right now it's not coming up at all. This is a running install of Ubuntu, not a new install, prior to the HW swap the Broadcom worked OK. I've searched all over, but nothing seems to address the specific problem of getting this started.
The laptop is a Dell m6400 with T9800 CPU and 4GB of RAM running 10.10 (2.6.35-22-generic x86_64).
lspci:
Code:
wprecht@LWP-laptop:$ lspci
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
ifconfig and iwconfig
[Code].....
View 2 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
Sep 20, 2010
ubuntu and fairly inexperienced in getting things to work. I recently bought a Kodak s100 webcam. I can get a few frames on cheese, skype, or guvcview. After that, the video feed goes to black screen. I have tried a few things I found in the forum, but have not been able to find a fix yet. Does anyone have any idea why this isn't working? Also, the webcam has a built-in microphone which I'm having trouble getting programs to recognize, such as skype.
View 2 Replies
View Related
Feb 23, 2010
I have recently installed Ubuntu and have not been able to get my printer to work. It shows that the printer is online and the pages I try to print show they are processing but there is never any response from the printer.
View 1 Replies
View Related
Oct 11, 2010
Since I originally started using Ubuntu (10.04) I have had problems with my wireless card. Now I have updated to 10.10 and it has stopped working entirely. I am using a "Dell Vostro 1520" with an "Intel(R) WiFi Link 5300 AGN" wireless card.Here are the details: 10.04
In this distribution version, if I had the wireless switch on my laptop activated at startup my wireless card would refuse to activate. There is a light to show when it is activated and this was off, but I checked anyway and wireless capabilities don't work when it is in this state. It didn't even resolve the problem when I switched it off and on again (although this caused the wireless indicator to blink on for less than a second when switched on).This was manageable because I found two workarounds:
1. Wait until my laptop had logged into Ubuntu, then activate the wireless card which would start and work as it should.
2. If I had already logged into Ubuntu I could put my computer on standby, switch off the card, come out of standby and reactivate the card while Ubuntu was running.As I said, this was completely manageable, and I got used to it. 10.10
Now that I have upgraded to 10.10 all workarounds fail, I can't use a wireless connection in Ubuntu, as my card won't activate, I cant even get the light to blink as I could before. The only way I can use WiFi is by switching to Windows.I tend to use Ubuntu for my university programming work.
View 8 Replies
View Related
Jan 28, 2011
I posted a request on Kodak's FaceBook(FB) page asking about their support for Linux drivers URL... Search for Mark Schuster to see my request and click the LIKE button to voice your request for Linux support. Let's let them know we want Linux drivers for their printers.
View 5 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
Mar 1, 2011
does anyone know the repository that i can use. I can get openSUSE to recognize the printer it just doesn't print. I tried to use the drivers openSUSE says will work and none of them do.
View 1 Replies
View Related
Feb 25, 2010
I dont know how this happened, but my Kodak CompactFlash cant be used in my camera anymore. I use Ubuntu 9.10 to download pics from the CF, but somehow it must have happened a mistake. The Card cant be used in my camera anymore. The camera only display 00F8 -P- and cant be used anymore. Anyone know how I can format the CompactFlash to its original state?The Camera is an Olympus Camedia c2500L, and I cant format the card because the camera reject it.
View 5 Replies
View Related
Aug 13, 2010
I m trying to show the power of linux to the world bt no body helps me after lots of googling i cant find a proper way to install rpm,gz,bz2 n etc software in linux. without any error. dependency,error,n lots of other problem that i have faced. so being on pt..from last 3 days i m trying to install Wvdial 1.61 bt i m unable to do it. some wvstreams.pc file stoping me. i m really frusted. being a new to linux no one can expect lots of searching by me me..from last 3 days i m just trying traying n only tying..every time Google rediectes me to this site.. This is my last try.
I had compile and install Wvstream.tar.gz file sucssesfully. mainly i dnt knw wheter it is done or undone..then i m trying to install wvdial as my main aim.bt as put the command make...it show some thing like could nt found wvstreams.pc...stop i had personally chk tht file in the pkgconfig folder bt it still shows me that error. i want to connect my cell phone to RHEL5 any how.. i want to use internet in linux..
View 2 Replies
View Related
Sep 9, 2010
I have a Dell E6500 with and Intel 5300 wireless agn card running Lucid x64. Wireless works fine and speeds are great except when I download with either the browser or thru a torrent or even updates. Once I get to around 100 megs in to the file wireless stops working and the only way to get it working again is to disconnect and reconnect to the AP. I have installed the back ports and tried several other fixed to get this to work but nothing has helped. One more note this happens on 2 other wireless routers that I have tried so I know that it's not limited to my Linksys.
View 3 Replies
View Related
May 2, 2010
I have overlooked some very important tools that would give me the information I'm looking for. What I'm trying to do is -
Plug in a USB camera
find /dev/camera-pseudonym
mount /dev/camera-pseudonym /camera
cp * ~/pictures
umount /dev/camera-pseudonym
and then work on adding this camera to /etc/fstab so that it will automatically mount to the usual place. I don't know how to find the pseudonym. I can, lsusb and see Bus 004 Device 009: ID 040a:05c1 Kodak Co. Digital Camera I can fdisk -l and not see any new partitions (which, with most USB devices with storage, I can usually see the partition listed in fdisk -l) After these two commands related to search FOR the pseudonym, I draw a blank and resort to manually searching /dev for things that may be useful.
This is difficult, though, because there are dozens of files named usb-something, and they're all very similar to one another, and not related to typical pseudonyms I'm used to (like /dev/usb[0-9], /dev/sd[a-z], etc) I would like to be able to find the /dev entry based on the ID 040a:05c1 because every USB devices I've tried has been listed by lsusb, and is accompanied by an ID number.How do I find the pseudonym in /dev for any usb device?
View 3 Replies
View Related
Jun 21, 2011
i'm using kubuntu and am stumped on getting it to recognise a kodak camera, which uses a program called easyshare, which i cant seem to install and linux drivers for it dont seem to be available, so what do i do now?
View 8 Replies
View Related
Apr 12, 2010
how something doesn't work. Just so I feel better (and hopefully you too), I <3 you Debian. You've worked wonderfully on many projects and experiments before. Here we go.
Gateway Solo 5300
Intel Mobile Pentium IIIe 900MHz
256MB PC100 SDRAM
Random 10GB 2.5" IDE drive (currently contains WinXP Pro)
For the very short time I could boot off the Debian 5.04 i386 CD, I'd choose the default settings to boot to the installer only to have it freeze about 3-4 seconds in. I tried a few of the compatibility options, but I can't remember which. I set up a quick and dirty PXE server using tftp32 on a Windows machine and used it to successfully boot to the Debian installer from PXE only to have it freeze in the same spot. I'm now running the installer using whatever was included on the Debian CD to modify Windows XP's boot.ini to load grub and (inherently the installer) and it is again freezing in the same spot. Ubuntu does roughly the same thing, but only gives me a blank screen.
I'm fairly skilled with Windows (been using since Win 3.1 and 6-8 years old) in the command line and graphical environment and I know enough Linux to make me accidentally type "ls" instead of "dir" when I'm in Windows' command prompt and enough to get around in terminal (apt-get, more/less, grep, pipes, make, etc). I'm sure Debian will make better use of my rather limited 900MHz proc. I'll do my best to understand the technical jargon.
The installer only manages to get to about here: (I get to type this out manually. Ignoring timestamps. Bear with me.)
Freeing initrd memory: 11977k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1271025644.848:1): initialized
[Code]....
Googling the last few lines suggests the problem is with USB. There is no option to disable the onboard USB controller and additionally, there is no option to boot from USB. Thinking the problem might be IRQ conflicts, I've disabled the Serial and Parallel port from the BIOS in a desperate attempt to free up IRQs slightly. The CD-ROM drive can be removed and swapped with a floppy drive or extra battery. I've removed as many devices as I can, the full list of which is just the CD-ROM and PCMCIA wireless card.
View 11 Replies
View Related
May 30, 2010
I just install F13 yesterday, before that I use F12 and it works well with no problem. The biggest and only problem I have with F13 is wifi network. If I turn on wifi switch before OS start, WIFI LED lights and wireless works. Then I try to turn off switch and turn on again, but the LED doesnt light any more, so wireless is also silent. The bad thing is there are many notifications of kernel crash.
View 5 Replies
View Related
Feb 27, 2011
I am using fc14 i686, and I am having a problem with my wireless card. Even though the led of the wireless card lights up the network manager claims that the wireless is disabled. I don't understand what is going wrong.I am a newbie trying to be sth better bur for the time being my only help could be the outputs of the lshw, lspci and lsusb commands.
View 5 Replies
View Related
Aug 12, 2010
I'm running 11.3 with KDE 4.4.4 and I'm trying to get my camera to work. DigiKam sees it and knows what it is but can't see or download any of the pictures on it. I'm wondering if there's some step or file that I'm missing.
View 1 Replies
View Related
Oct 7, 2010
I have an IBM ThinkPad W700 running 64 bit Ubuntu 9.10 Karmic Koala. At the office I normally connect it to the Ethernet since it's never connected very reliably to the wifi there (drops out 2 or 3 times per day, usually at the worst possible time, of course), but it always worked just fine with Netgear WGR614v5 at home... until a week or two ago.
I used to be able to come home, take the laptop out of suspend mode, and it would connect to the wifi. Occasionally there'd be some hitch and I'd have to restart the network manager (sudo /etc/init.d/network-manager restart) but this was only sometimes, and when I did, it'd always work. But now, when I get home from work, I need to restart the entire system to get it to connect properly again. Without restarting the whole system, it either doesn't scan for wifi networks, it doesn't find any wifi networks, it keeps stuffing up my wifi password, or it connects and gets 0% signal.
Presumably, some driver was updated recently and it doesn't work so well. What's the easiest way to find out what drivers have been updated lately, and revert to a previous version? And what else can I try restarting so I don't have to restart the entire system? I've tried /etc/init.d/network-manager restart, /etc/init.d/networking restart, /etc/init.d/network-interface restart, and restart network-manager. I've also tried turning the wireless switch at the front of the laptop off and on, many times.
Code:
$ lspci -nn
[...]
03:00.0 Network controller [0280]: Intel Corporation Wireless Wifi Link 5300 [8086:4236]
[...]
$ ifconfig wlan0
[Code]...
The info above is when I've taken my laptop out of suspend mode and it won't connect to the network. lsmod doesn't say anything about wifi nor wireless; iwlist does see my network, which my older Januty laptop is connected to without drama.
View 1 Replies
View Related
Jan 21, 2011
Ive installed Ubuntu recently but none of my attempts to get the wifi network working were successfull. It establishes connection but the indicator shows no signal and I cant connect to any website, I tried pinging external IPs etc. None of these worked. lspci -nn | grep 'Wireless Brand'Does not show anything. I could find 03:00:0 Network Controller: Intel Corporation Ultimate N WiFi Link 5300 lsmod | grep "wlan_module_name"Doesnt show anything. Restarting network says only: *Reconfiguring network interfaces... Kernel boot messages:
[Code]....
The network Im trying to connect to is hidden, so I have to input SSID manually, I doubt this causes the problem.
View 2 Replies
View Related
