does anyone know the repository that i can use. I can get openSUSE to recognize the printer it just doesn't print. I tried to use the drivers openSUSE says will work and none of them do.
View 1 RepliesI have recently installed Ubuntu and have not been able to get my printer to work. It shows that the printer is online and the pages I try to print show they are processing but there is never any response from the printer.
View 1 Replies View RelatedI an an HP Pavillion laptop with SuSE 11.4. I had 11.3 working but I had to upgrade (install, not update due to other issues).
Now, when I go to YAST2 ->Hardware->printer->Print via network->Connection Wizard-> TCP Port and set the IP address and hit TEST CONNECTION I get an "OK". I select "Kodak" as the printer manufacturer and get these as my driver choices.
It uses port 9100 which looks open. I pick one driver and YAST creates the config. I then hit "Print test page" and nothing happens. This happens with either driver and a couple I downloaded from who knows where.
The printer is a Kodak ESP 5210 that runs with Windows 7 and Vista on the same network. Any ideas? Any tools I can use to sniff it out? I dropped the firewall to no avail, moved to the internal zone, no joy. It worked under 11.3 but I did not record the configuration steps or setup.
I'm running 11.3 with KDE 4.4.4 and I'm trying to get my camera to work. DigiKam sees it and knows what it is but can't see or download any of the pictures on it. I'm wondering if there's some step or file that I'm missing.
View 1 Replies View RelatedI'm thinking of buying one of the above as the HP 750 PCS I have hooked up to the wife's iMac is getting long in the tooth and is NOT well supported my Apple! It will either print or scan but not both without rebooting between tasks.One of the attractions of the Kodak is the cheap cost of ownership and they appear to be supported my Apple so that would be good! But what about Ubuntu support as a network printer?
View 1 Replies View RelatedI went to the Kodak website to see if I can download Kodak ESP 3200 series for Ubuntu, but it only has them for windows and MAC is there a way around this other than using VBOX?
View 2 Replies View RelatedI bought a Kodak 5300 printer/scanner a year and a half ago and then found that it would not work under 9.04. So I packed it away. Now I find reports on this website that it can be made to function properly on Lucid Lucy.
I find references to the printer all over the place, but when I try to print something nothing happens. I tried the print routine in 'gimp', 'gedit', 'thunderbird, and 'firefox'.The printer as a stand alone will copy and scan. About a year and a half ago it was connected to a Windows machine and worked.The Samsung you see works just fine.
I am trying to install a Kodak Printer to my Ubuntu10. Only to be informed that the CD autorun is not supported in files, I have the printer installed on the windows OS, without any problems, I have explored the CD and even tried setup but with no joy.Has any member encountered similar probs with installing software.
View 4 Replies View RelatedI dont know how this happened, but my Kodak CompactFlash cant be used in my camera anymore. I use Ubuntu 9.10 to download pics from the CF, but somehow it must have happened a mistake. The Card cant be used in my camera anymore. The camera only display 00F8 -P- and cant be used anymore. Anyone know how I can format the CompactFlash to its original state?The Camera is an Olympus Camedia c2500L, and I cant format the card because the camera reject it.
View 5 Replies View Relatedubuntu and fairly inexperienced in getting things to work. I recently bought a Kodak s100 webcam. I can get a few frames on cheese, skype, or guvcview. After that, the video feed goes to black screen. I have tried a few things I found in the forum, but have not been able to find a fix yet. Does anyone have any idea why this isn't working? Also, the webcam has a built-in microphone which I'm having trouble getting programs to recognize, such as skype.
View 2 Replies View RelatedI have overlooked some very important tools that would give me the information I'm looking for. What I'm trying to do is -
Plug in a USB camera
find /dev/camera-pseudonym
mount /dev/camera-pseudonym /camera
cp * ~/pictures
umount /dev/camera-pseudonym
and then work on adding this camera to /etc/fstab so that it will automatically mount to the usual place. I don't know how to find the pseudonym. I can, lsusb and see Bus 004 Device 009: ID 040a:05c1 Kodak Co. Digital Camera I can fdisk -l and not see any new partitions (which, with most USB devices with storage, I can usually see the partition listed in fdisk -l) After these two commands related to search FOR the pseudonym, I draw a blank and resort to manually searching /dev for things that may be useful.
This is difficult, though, because there are dozens of files named usb-something, and they're all very similar to one another, and not related to typical pseudonyms I'm used to (like /dev/usb[0-9], /dev/sd[a-z], etc) I would like to be able to find the /dev entry based on the ID 040a:05c1 because every USB devices I've tried has been listed by lsusb, and is accompanied by an ID number.How do I find the pseudonym in /dev for any usb device?
i'm using kubuntu and am stumped on getting it to recognise a kodak camera, which uses a program called easyshare, which i cant seem to install and linux drivers for it dont seem to be available, so what do i do now?
View 8 Replies View RelatedI posted a request on Kodak's FaceBook(FB) page asking about their support for Linux drivers URL... Search for Mark Schuster to see my request and click the LIKE button to voice your request for Linux support. Let's let them know we want Linux drivers for their printers.
View 5 Replies View RelatedI have been trying to find out if there is a driver I can install for my Kodak 5300 aio printer, but the only thread I can find is from 2007, which basically says it's MIA.
Does anyone know if there is one now or not?
This probably way TOO much information. Sorry for the long post. I bought a Kodak 5300 printer/scanner a year and a half or so ago and then found that it would not work under ubuntu 9.04. So I packed it away. Now I find reports on several websites that it can be made to function properly with ubuntu 10-4 Lucid Lynx. I downloaded and installed the recommended driver - c2esp. [URL]...
Quote:
dave@dave:~$ dmesg | tail -n 14
[ 43.353990] EXT3 FS on sdb1, internal journal
[ 43.354009] EXT3-fs: mounted filesystem with ordered data mode.
[12885.576042] usb 1-8: new high speed USB device using ehci_hcd and address 5
[12885.720095] usb 1-8: configuration #1 chosen from 1 choice
[12885.730916] usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x040A pid 0x4026
[Code]....
I find references to the printer all over the place, but when I try to print something nothing happens. I tried the print routine in 'gimp', 'gedit', 'thunderbird, and 'firefox'. The printer as a stand alone will copy and scan. About a year and a half ago it was connected to a Windows machine and worked.
This device doesn't automount, doesn't show in KDE 4's device notifier, and I can't mount this camera manually because it doesn't appear to get assigned to a device node. Any known solutions? It worked in Slackware 12.2, but not in 13.0 or 13.1.
View 2 Replies View RelatedCan anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
View 9 Replies View RelatedI successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
I just purchased a Verizon USB 760 Modem.I purchased the Modem from Verizon because their web site stated that it supported all major OS including Linux.
My system specs are: HP Compaq 6715b Laptop
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.0 (i586)
[Code]...
I installed opensuse 11.2 64-bit edition. I installed all of the software I wanted.I now want to clone the installation to 6 other workstations that are 100% identical to the first.I used clonezilla to create the image, but all of the new workstations will not boot. This is due to the fact of the fstab being 100% cloned and other boot volume problems.Does anyone know of a good, easy way to clone opensuse 11.2 that will work?
View 9 Replies View RelatedI upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the Intel® Wireless WiFi Link drivers for Linux* website.
View 9 Replies View RelatedI have three machines with the same configuration. ssh and SFTP enabled on all three and I can see all three from the network. I can also ping all three. Here is what I get with the ssh debug command on the problematic machine:
linux-csp7:/home/ines # ssh -vvv ines@192.168.2.19
OpenSSH_5.2p1, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
[Code].....
I am trying to get my mic working for voice chat on DDo, but I have had no luck so far. I have a headset with a microphone on it, but I don't seem to be able to get it to record. the audio out put works though.
View 9 Replies View RelatedWhen I type
Code:
or
Code:
On shell, kernel does not recognize it. What can I do for that?
I have vnc running, but I can't change the startup script to use a different desktop manager. I can't tell if it has anything to do with it being TightVNC or not. I can't find information regarding VNC (which I want) and guides are cryptic/don't work 100%.
I'd like to set the default to KDE and log in via internet which I can do via url. Unfortunately, I'm not exprienced with remoting in as well VNC is enabled and config script is listed below.
Visited: VNC HOWTO - openSUSE
- Remote Access to the openSUSE Linux Desktop - Techotopia
Version: 11.3
Default X: KDE (Installed Fluxbox, lxde, xfce)
[Code]....
I just did a fresh install of OPENSUSE 11.3. And I can't connect to the machine via ssh.
I get the folowing error in /var/log/messages: Sep 4 08:04:11 OSUSE sshd[10589]: Accepted keyboard-interactive/pam for primzy from 192.168.4.222 port 1042 ssh2 Sep 4 08:04:11 OSUSE sshd[10589]: syslogin_perform_logout: logout() returned an error
how to solve this but nothing seams to work. One of the links was this one: link . From this link I found out that I'm missins /etc/ttys file, But creating it did'n make any difference.
Here are some information on my system:
OSUSE:/etc # zypper lr -d
# | Alias | Name |
[Code]....
I have the cnf utility not working. What should I do to restore functionality?
View 9 Replies View RelatedI have used Gscan2pdf for a long time on opensuse11.2 and it worked very well as a scan tool.I have now reinstalled suse 11.2 (I managed to break it last week) but cannot get gscan2pdf to work and do not know how I did it last time.It requires certain dependancies to be manualy installed and that has been ok, but I cannot find one of the dependancies called.Does anybody know where I can get it from?
View 1 Replies View RelatedI have just installed compiz through the YaST2 software manager.It all downloaded and installed OK as I can see it in the Kickoff Application Launcher.But although I have set the configuration for cube rotate, when I point and click to different desktops on the task bar, the switch is without rotation
View 5 Replies View RelatedPicasa Web Albums - Sri - Linux
when i hit alt+F2 the run dialogue opens up but i am unable to type anything there.you can see the screenshots of those in that link.any packages to reinstall??
i am using kde 4.3.1 (KDE 4.3.1) "release 6" on opensuse11.2 64 bit.i have used this before with no problem.i recently formated my system and i am getting this since then