Ubuntu :: K3B Burning ISO - CD Record Has No Permission To Open Device
May 4, 2011I am new to k3b and trying to burn an iso and get the following message during the burn process .
"CDrecord has no permission to open the device".
ADVERTISEMENT
Ubuntu Multimedia :: K3b Burning - Cdrecord Has No Permission To Open The Device
Dec 14, 2010I was trying to burn an .iso with K3b a little while ago, and had some problems. First of all, even though I chose 8x to burn my (16x) DVD, it switched to 11x or 12x around halfway through the burning process. There were also some ticking noises that I'm pretty sure were coming from the DVD writer, not terribly loud, but noticeable. This had never happened before. Finally, it got stuck at about 98% (but not frozen, as the time elapsed kept going), and did not finish burning--got an error message (and a bad disc): "cdrecord has no permission to open the device"
I inspected the disc and there was one dark spot (on the dye) about halfway through the disc, very thin and couple of millimeters long. (This was present only after burning). I'm using Ubuntu 10.04, K3b version 1.91.0, Lite-On DVDRW SHW-160P6S
[Code]...
OpenSUSE :: Cdrecord Has No Permission To Open The Device?
Jan 7, 2010Still getting the "cdrecord has no permission to open the device" error when trying to burn an iso image to a DVD-RW.
I did yet another clean install of openSUSE 11.2 64 on my desktop computer, did updates, added Nvidia and Packman repos (it's not a repo problem as I tried it several times on a totally clean install), added codecs and stuff as advised by caf.
I updated the DVD drive firmware earlier today.
My user is a member of ALL groups.
Drive is an LG GH22NSS50 (sata)
It all works (with the same DVD-RW) under winxp on the same machine.
Is it HAL or something else that blocks permission to devices?
I'm really getting sick to death of this problem, and would be happy just to get rid of anything blocking permissions to the DVD drive.
Slackware :: Error - Libusb Couldn't Open USB Device /dev/bus/usb/001/001: Permission Denied
Mar 24, 2011Hello,
this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.
Error in console:
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.
my sript runs:
scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840
my groups:
uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)
Even a simple:
scanimage -Lv
in console gives this on a separate --current pc as well.
Ubuntu Multimedia :: K3b Burning - Errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254)
Aug 14, 2010Iam trying to burn wave files to a cd that i ripped from a cd when i try burning to gets to 300 meg and stops with these errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254) SOMETIMES USING TAO WRITING MODE SOLVES THIS ISSUE Using ubuntu 10.04
View 1 Replies View RelatedDebian Hardware :: No Record Device
Jul 19, 2013I reccently installed Debian Wheezy 7.0.0.1 and when I tried to try the microphone nothing came out only the audio coming what I'm listening to (like What you hear on Windows) and noticed that I don't have any Microphone in either Alsa or anywhere else, only Output devices.
Now Creative is gone from "Available capture devices" in Skype.
Ubuntu Multimedia :: Unable To Open Device /dev/dsp - Device Or Resource Busy
Apr 13, 2010All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies View RelatedUbuntu :: Mdadm: Cannot Open Device /dev/sdb1: Device Or Resource Busy
Jun 11, 2011I rebooted my server and out of nowhere the RAID5 array won't assemble. I've tried everything I could think of to reassemble the thing. I fear that the array is ruined, but I can't imagine how. Here are various bits of information: The simplest failure (with and without partition numbers, which have not been needed in the past):
Code:
richard@nas:~$ sudo mdadm --assemble --verbose /dev/md0 /dev/sd[bcd]
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/sdb: Device or resource busy
[code]...
Software :: Fixing A Dvd Left Open - Not Finalized By The Burning Application?
Feb 26, 2010GNU/Linux kernel 2.6.
MS windows xp.
I was burning a DVD+R DL when a read error happened and the burner program stopped execution. Now, when I ask for the disk status it says: 'disk status: open, not finalized' (Nero 7 under ms win xp). Besides this, I have at my disposal Cdrecord-ProDVD-Clone 2.01 and K3b 1.0.2 under KDE 3.5.7.
Server :: Creating Alias Or CNAME Record For Each Network Device
Oct 28, 2010I'm running Ubuntu Server 10.04 to provide DHCP and Internet Sharing on my home LAN. In a previous configuration, I was running Fedora + AMAHI to provide the same services. As most of my linux devices are Ubuntu, I decided to decommission and rebuild my server. I've been able to configure all of my services with the exception of one. As a rule, I assign static IP or reservations based on MAC address's for any of my network devices or appliances.
One cool feature that AMAHI provided a GUI for, was the ability to recognize devices by name as well as IP. i.e.. "http://192.168.1.50" or "http://home-NAS" Going from memory, the long name upon first entry may actually have been "http://home-NAS.adomainname.com"? From my reading, I think I either need to setup up a Static Alias or CNAME for each assigned IP. I can't find any tutorial's that will walk me through this process. I'm guessing I need to generate the records under one of the master DNS zones, but that is just a guess?
Ubuntu Multimedia :: Record Sound In Kubuntu 10.04 - Default Device For Audio Recording Does Not Work
Jun 28, 2010I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
General :: Open Embedded - No Machine Record Defined
Feb 13, 2011I am trying to; "bitbake base-image" and get the following:
Build Configuration:
BB_VERSION = "1.10.2"
METADATA_BRANCH = "master"
METADATA_REVISION = "8d22023"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "at91sam9g45ekes"
DISTRO = "angstrom"
DISTRO_VERSION = "2010.7-test-20110214"
TARGET_FPU = "soft"
Log data follows:
| NOTE: make -j 4 include/linux/version.h
CC=arm-angstrom-linux-gnueabi-gcc
-mno-thumb-interwork -mno-thumb
LD=arm-angstrom-linux-gnueabi-ld
| CHK include/linux/version.h
| NOTE: make -j 4 uImage
CC=arm-angstrom-linux-gnueabi-gcc
-mno-thumb-interwork
-mno-thumb LD=arm-angstrom-linux-gnueabi-ld
| CHK include/linux/version.h
| SYMLINK include/asm -> include/asm-arm
| make[1]: `include/asm-arm/mach-types.h' is up to date.
| CHK include/linux/utsrelease.h
| CALL scripts/checksyscalls.sh
| <stdin>:1097:2: warning: #warning syscall fadvise64 not implemented
| <stdin>:1265:2: warning: #warning syscall migrate_pages not implemented
| <stdin>:1321:2: warning: #warning syscall pselect6 not implemented
| <stdin>:1325:2: warning: #warning syscall ppoll not implemented
| <stdin>:1365:2: warning: #warning syscall epoll_pwait not implemented
| CHK include/linux/compile.h
| GEN .version
| CHK include/linux/compile.h
| UPD include/linux/compile.h
| CC init/version.o
| LD init/built-in.o
| LD .tmp_vmlinux1
| arm-angstrom-linux-gnueabi-ld: no machine record defined
| arm-angstrom-linux-gnueabi-ld: no machine record defined
| make: *** [.tmp_vmlinux1] Error 1
| FATAL: oe_runmake failed
| ERROR: Function do_compile failed
NOTE: package linux-2.6.30-r6: task do_compile: Failed
Ubuntu :: Firefox - Open Pdf Files - Doesn't Record Settings About Preferred Applications
Jul 28, 2011lately I'm experiencing a few issues with Firefox 5.0 on my Ubuntu 11.04 installation. First of all, when I try to open pdf files, I often get a black page and I've to try to reload it many times before I can effectively read the pdf (even for small-size ones).
Secondly Firefox doesn't record settings about my preferred applications. If, for example, I want a file .torrent to be opened by deluge I have to enter manually /usr/bin/deluge because by default it would be opened by gedit. No matter if I select "use as default application" the next time the issue will be present again.
General :: Saving Permission Changes For Device?
Dec 1, 2010I have installed a driver on SUSE, and changed permissions for it (/dev/name) with the chgrp command.
However after rebooting my computer the change is lost. How can I save the permissions for the device?
Fedora :: How To Make Permission Change For Device Permanent
Jun 23, 2010I recently compile Kernel 2.6.34 (to fix the AMD PowerNow issue with 1055T processor, and it worked!) However, the device
/dev/shm
starts up at boot as Read-Only.
Google Chrome requires this device to be user-writable, or it won't start up. Presumably, the stock kernels (and all that are updated) have it set to User-Write. I have not noticed any other ill effects with the permission being read-only. If I do:
sudo chmod a+w /dev/shm
Everything will work from there, but each time I reboot, I have to do that. How do I make that permission-change permanent?
General :: Permanently Changing Permission Of FireWire Device?
Jan 22, 2011I just setup a FireWire audio interface. Everything works fine, except for I need rw-rw-rw- permissions on /dev/fw0. I can always sudo chmod 666 /dev/fw0 just before setting the thing up, but then it will be gone on the next rebooting.The solution to modify /etc/udev/rules.d/020-permissions.rules (which is for Ubuntu Breezy) doesn't go well for Ubuntu 10.10 Maverick because there is no /etc/udev/rules.d directory.
View 1 Replies View RelatedGeneral :: Change The Owner/permission Of Device Files?
Mar 10, 2011For example /dev/loop*, /dev/raw/*, etc., they are automatically reset to root/root after rebooted.Change the owner/permission of device files maybe not a good idea, though. I just want to know if it is possible and how?
View 1 Replies View RelatedSoftware :: Open Source Dvd - Cd Copy Program - Burning On The Fly Program?
Dec 14, 2009Is there anything like burning rom from nero or roxio cd/dvd copier. Do you know of any dvd copying program? like without making the image and then burning with just one process just copy the disc sorta program like roxio dvd copier? I wanted to make copies of movies I made a dvd of but aside from image burn which is a hassle to make the image first. is there something for burning on the fly or dvd/cd copying? infrarecorder and cdburnerxp do not work for me at all.
View 3 Replies View RelatedSlackware :: Optical Drive Not Identified - Get Permission To Read / Write In The Device
Aug 6, 2010On one of my machines the DVD/DVDRW/CDROM drive appears as /dev/hdc and is not identified as an optical drive by HAL. It is owned by root: disk and thus no users get permission to read/write in the device (not even those in the cdrom group). This stops playing DVDs, ripping CDs, no notifications appear when a disk is inserted, etc. etc. When I set the permissions for all to read/write from the device then users can access but still no notifications are shown.
On all my other machines the optical drive is identified as /dev/sr0 and is owned by root:cdrom . All have Slack 13.1 . Previously with Slack 12.2 this machine still had the drive in /dev/hdc but the permissions were right (I think because I added it to /etc/fstab with options for users to access it). I believe the problem is down to HAL not setting this drive to the correct group, but how do I fix it? I hate HAL, it has a mind of its own, just like in the scifi movie
Ubuntu Installation :: Permission Denied While Trying To Open /dev/sda1?
Mar 25, 2010When, from the live cd I try to execute
Code:
e2fsck -y /dev/sda1
All i get is:[code].......
Ubuntu :: How To Change Permission Folder So Only Root Can Open It
Apr 18, 2011i wonder how to change permission folder, so only root can open it?
View 9 Replies View RelatedFedora :: Lost User Permission For Open Office?
Dec 8, 2010It has worked in the last week or so. Not sure when I ran it last. Now only root can run Open Office. The menu and a quick start Icon both give no response but su can call from the command line. I,user, can't. Seems there was a big OO update in the last several days, this might be the cause. I spoke too soon. Now su will not get it either. I tried su -l and su with no success. Also an Icon for OO quick start has gone away.
View 2 Replies View RelatedFedora :: KVM Could Not Open Disk Image - Permission Denied
Dec 24, 2010I'm getting error from KVM when i try to create new machine. I have install group Virtualization. From gui virtual-manager (after being asked for root passwd) tried to create new machine. When pressed on 'Finish' got this 'Permission denied' error:
Code:
Unable to complete install '<class 'libvirt.libvirtError'> internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 1567, in do_install
dom = guest.start_install(False, meter = meter)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1023, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1088, in _do_install "install")
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1059, in _create_guest
dom = self.conn.createLinux(start_xml, 0)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1277, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
It's running as a root, what permissions we are talking about here? I'm running F14, kernel 2.6.35.10-72.fc14.x86_64, libvirtd 0.8.3
General :: Cannot Open Network Interfaces - Permission Denied
Dec 11, 2010I can't open etc/network/interfaces file comes some permission denied. What can I do?
View 2 Replies View RelatedSlackware :: Sudo: Can't Open /etc/sudoers: Permission Denied
Jun 10, 2011After install TexLive, sudo stop working. If I run sudo:
Quote:
sudo: can't open /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting
Edit: Hal and dbus is not working either, if i startx I don't have network manager or automatic mount of pen and disks.
Slackware :: Error - Cannot Open /dev/ttyACM0: Permission Denied
Aug 7, 2010I installed wvdial on my Satellite Toshiba laptop. All works well but I have to use the <wvdial> command as root. If I try to use it as a user i get an error message Cannot open /dev/ttyACM0: Permission denied So Im just wondering; is it ok to use wvdial as root?
View 2 Replies View RelatedUbuntu :: PHP Not Working - Warning: Unknown: Failed To Open Stream: Permission Denied
Mar 10, 2010I just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.
Ubuntu :: Server Virtual Site - Permission Denied - Unable To Open Logs
Apr 20, 2010I was able to get the a2ensite command to enable a virtual site because it says "Site xxxxx.com already enabled" when I run the command. My problem now is that even though a site is enabled it says this: Code: /etc/init.d/apache2 restart * Restarting web server apache2
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Should I do a chown or chmod to a file?
General :: Unable To Open Pty - Permission Denied While Trying To Login To Vps Node
Mar 8, 2011Unable to open pty: Permission denied while trying to login to vps node.
View 2 Replies View RelatedDebian :: Ntfs-3g Mount: Failed To Open /dev/fuse: Permission Denied
May 19, 2010I cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.
View 5 Replies View Related