Slackware :: Optical Drive Not Identified - Get Permission To Read / Write In The Device
Aug 6, 2010
On one of my machines the DVD/DVDRW/CDROM drive appears as /dev/hdc and is not identified as an optical drive by HAL. It is owned by root: disk and thus no users get permission to read/write in the device (not even those in the cdrom group). This stops playing DVDs, ripping CDs, no notifications appear when a disk is inserted, etc. etc. When I set the permissions for all to read/write from the device then users can access but still no notifications are shown.
On all my other machines the optical drive is identified as /dev/sr0 and is owned by root:cdrom . All have Slack 13.1 . Previously with Slack 12.2 this machine still had the drive in /dev/hdc but the permissions were right (I think because I added it to /etc/fstab with options for users to access it). I believe the problem is down to HAL not setting this drive to the correct group, but how do I fix it? I hate HAL, it has a mind of its own, just like in the scifi movie
View 2 Replies
ADVERTISEMENT
May 22, 2010
I dont know when k3b stopped working but have just gone to burn a disk and when opening it tells me
Quote: No optical drive found. K3b did not find any optical device in your system. Solution: Make sure HAL daemon is running, it is used by K3b for finding devices.
I can boot from cd and can mount cds from within Slackware but for some reason k3b insists that i don't have a drive.
View 8 Replies
View Related
Apr 2, 2011
I'm trying to backup netbook files to an external optical drive. I can read discs but not write. A while back I tried using K3b but it did not see the external drive. Now it does, but tells me write access is needed and quits. I am in the cdrom group.
View 2 Replies
View Related
Mar 31, 2010
I have a strange problem with my DVD player. The problem: My device seems not to read any CD (it does read DVDs). Prologue: On a previous installation I had the same problem. But after messing up with that system I made a re-install, and the problem was gone. So I wasn't concerned about the problem any longer. That would be fine, but recently I had to make a new re-install to have space for windows. (I know, I'm a sinful man) But now the problem is there again. And it even is there under windows.
Question: In how far is the hardware damaged or is it a software problem since it once worked? Hardware data:
-Systems: Fedora 12 & Vista
-Laptop: Dell Studio 1555
-Drive: Optiarc Model: DVD+-RW AD-7640S Rev: HD18
What I have been doing to fix the problem:
-I made an update of the firmware and bios with the files provided by dell
-cleaned the lenses (with a clean disc)
-checked log files (both windows and linux)
After setting udev to debug logging I received this
[Code]......
View 2 Replies
View Related
Feb 4, 2010
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies
View Related
Dec 21, 2010
I have a file the owner is root:root ( mode is 644 ), I want to release read & write permission to a non root user ( eg. admin_usr ), I tried to create a specific group ( eg. ADM ) and release it to root user and admin_usr ( by adding this users to ADM in /etc/group ) , but it is not work, if preserve the file mode to 644 , is it ok? how to do it if I want to have read & write permission in my case ?
View 5 Replies
View Related
Feb 4, 2011
allow specific user permission to read/write my folder
I have a folder called /TAR/Sketch
I added a new user, named Snoopy, I want to grant this user the ability to add files & directories to this folder which is under the group Sketches and the owner is me.
How can I accomplish this ?
View 1 Replies
View Related
Jun 26, 2010
On an Apache2 server someone else setup, I have a folder with drwx--x--x permission and the php file can still write in the folder. But on my own setup, I need to set the same folder to drwx--x-wx. Inside the folder, I have a index.php that runs just by setting rwx--x--x but on my own setup, I need to allow read permission for others/group before it can run: rwxr-xr-x (or else I get a blank page). I tried changing the folder and files to root but it's the same.
View 5 Replies
View Related
Apr 13, 2011
I need programmer a timer of 10 ms for read/write a USB device
View 4 Replies
View Related
Apr 23, 2011
I Have Configure Samba server in Centos, I need give permission like for some user(5User) can able to read and write the particular folder, and again i need give some another user(6user) can only read permission for same folder.
View 1 Replies
View Related
Mar 4, 2011
I need to change a filename but when I boot up I get the message root device is read-only. Is there a way of changing this so that I can change the filename. I have a Mac Pro running Leopard OSX. The graphics card an NVIDIA 7500GT or driver has failed. It was suggested elsewhere that I change the relevant kext files to filename.kext.old, which I did, now when I try to boot start in OSX I get a message in various languages telling me to restart. I have tried booting in safe mode and from original Installation CD. In Safe Mode I get the same multi language splash screen, from CD I still have the graphic card problem, screen freezes and artifacts appear. So I boot up straight into CLI by holding down CMD-S hoping to be able to change filenames back but it says device read-only.
View 2 Replies
View Related
Jul 30, 2011
My wife is purchasing a netbook with no internal CD/DVD writing device, so we plan to purchase an external CD/DVD USB-2.0 read/write device. Our local PC shop has the following 3 external USB-2.0 DVD read/write devices:
(a) Samsung DVD-Burner SE-S084F/RSBS [not listed on Samsung site - too old ? ]
(b) LG DVD-Burner GE24NU21 USB2.0 [not listed on LG site - too old ? ]
(c) Super-Multi Portable DVD Rewrite (GP10 Lite USB2.0 Slimline) GP10NB20 (mentions Mac OS/X support, which is encouraging)
None of those are listed in the openSUSE HCL. Has anyone successfully used any of these with GNU/Linux (my google surfing on this revealed no GNU/Linux complaint nor any success stories) ? Or is there another such external USB-2.0 read/write DVD burner device that is recommended ?
View 2 Replies
View Related
Feb 17, 2011
I used dual booting with Windows Xp and Ubuntu 10.04. Because errors, I reinstall Windows and then I could not enter GRUB, and Ubuntu partition disappear. I tried to reinstall ubuntu using live CD but I could not detect last ubuntu partitions. After I installed fresh Ubuntu on new partition, I got error message like this:
Unable to mount floppy0 Mount: block device /dev/fd0 is write protected, mounting read-only Mount: could not determine the file system type, and none was specified
View 8 Replies
View Related
Jun 24, 2011
Now i have a problem.I want to used a hid usb device under linux 2.6.11.But i can't know how to used ioctl function to send and receive data to a hid device
View 3 Replies
View Related
Feb 17, 2011
I have a computer with Ubuntu 10.04, with few disk space. For downloading some torrents, I've connected a USB hardrive, ext4 formated. But this idea wasn't a solution, because the drive keeps getting read-only permission... Is there any way of prevent this to happen?
View 2 Replies
View Related
Nov 26, 2010
Following the last update bringing kmail 2.0.89 it does not start any more. I get a popup signaling a fatal error : "no read/write permission to your inbox folder". But these permissions have not changed. And even if I move away the Mail folder and try to start kmail I get the same message.
[code]...
This kmail version given by YAST is : 4.5.80-261.1
View 3 Replies
View Related
Sep 23, 2009
I can't copy a few files from my pen drive. Got the files from a public computer, with windows. I use fedora 10.
cp gives the following error--->
cp const1.java /home/user1/Documents/scjp
cp: cannot open `const1.java' for reading: Permission denied
lsattr shows this--->
lsattr const1.java
lsattr: Permission denied While reading flags on const1.java
mount shows this--->
/dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
View 3 Replies
View Related
Mar 22, 2011
I am not the best with Linux but at the same time like to think I am not the worst, Anyways like stated above my dvd drive is saying its read only and i would like to make it read/write here is some info:
*-disk
description: ATA Disk
product: ST3500418AS
vendor: Seagate
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: CC46
serial: 9VMRTLT1
size: 465GiB (500GB)
Capabilities: partitioned partitioned:dos
Configuration: ansiversion=5 signature=0005ce96
*-cdrom
description: DVD reader
product: DVD-ROM SD-M1612
vendor: TOSHIBA
physical id: 0.0.0
bus info: scsi@5:0.0.0
logical name: /dev/cdrom
logical name: /dev/dvd
logical name: /dev/scd0
logical name: /dev/sr0
version: 1806
capabilities: removable audio dvd
configuration: ansiversion=5 status=nodisc .....
View 2 Replies
View Related
Apr 6, 2010
After installing the "fuse" and "fuse-ntfs-3g" packages, my ntfs formatted thumb drive mounts read only, as follows:# mount.../dev/sdb1 on /media/disk type fuseblk (rw,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096)
View 17 Replies
View Related
Apr 20, 2011
I tried to burn with k3b but after a while the fateful message "cdrecord has no permission to write to the device. " Then I launched k3bsetup and I selected the burning group. Did not exist. I created it and now i'm included in it. Then I checked all the boxes for the write permissions of the programs used by k3b and the writer. Now it works. But after reboot, the box of the burner device is not checked. So I have to select it each time. Boring. DO you know how to save the setting permanently
View 6 Replies
View Related
Jun 29, 2011
I can read and write data dvds, but cannot play a regular dvd now. I have libdvdcss installed. I am running Slackware 64 13.37 (just installed).
Code:
MPlayer 20101218-4.5.1 (C) 2000-2010 MPlayer Team
Playing dvd://.
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdread: Could not open /dev/dvd with libdvdcss.
libdvdread: Can't open /dev/dvd for reading
[Code]...
It can see the drive is there and /dev/sr0 is linked to /dev/dvd and I tried running as root to check if it was a permissions problem but got the same thing.
I have tried lots of different DVDs in the drive, same issue. I even switched out my DVD drive to another old DVD-ROM I had laying around, same thing.
View 14 Replies
View Related
Oct 7, 2010
I try
mount -t ntfs -o rw /dev/sdb1 /mnt/exthdd
it doesn't give me any response so I presume it succeeded but when I try to touch it, it tells me it's a read-only file system
View 1 Replies
View Related
Sep 17, 2010
I have a computer with no floppy drive (x64 ubuntu lucid installed) I have a program (wine windows xp) that will only save data and export data from/to a floppy drive. I found information on setting up an emulated floppy drive. i.e.
sudo dd bs=512 count=2880 if=/dev/zero of=imagefile.img
sudo mkfs.msdos imagefile.img
sudo mount imagefile.img /media/floppy -o loop
I modified the winecfg to include under the drive section A: /media/floppy. Problem is I cannot write to the drive as a normal user. I have tried everything I know but only root can read write to the drive. Is there someway to set up this emulated floppy to allow me as a user to write and read contents.
View 1 Replies
View Related
Mar 31, 2010
I am using sun micro system. We have installed fedora in that. I want to know how to give R/W permission to a external hdd...
View 1 Replies
View Related
Jul 20, 2009
I am trying to install the reiserfs drivers to read/write to my external drive. But keep getting command not found. Although the system can get man pages for modprobe.
modprobe reiserfs
bash: modprobe: command not found
I also need to know how to add myself to the sudoers file. I have already tried visudo but this has not worked.
View 1 Replies
View Related
Mar 24, 2011
Hello,
this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.
Error in console:
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.
my sript runs:
scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840
my groups:
uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)
Even a simple:
scanimage -Lv
in console gives this on a separate --current pc as well.
View 2 Replies
View Related
Jan 4, 2011
I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection.I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives.I have created the directory /archive/ where I would like the drive(s) to mount.The drives are all formatted Fat 32 - but in the future I may use HFS for formatting.When I used the command (as root):mount /dev/sdc1 /archivethe drive was mounted (but read only)What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing)Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives?
View 2 Replies
View Related
May 7, 2009
I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
View 1 Replies
View Related
May 22, 2010
I initially thought the problem had to do with the Lucid Lynx upgrade, a lot of people have been reporting similar issues with drive mapping and things along those line. My issue is that an external drive, formatted in FAT32 appears to be corrupted, and overtime begins to read or mounts as 'read-only.'
What I've read, and deduced, is that this is ultimately and issue with the drive. I've backed it up, reformatted, and been able to write to the drive successfully, but I've been moving a lot of files (backing up) and the system has been reporting input/output errors in transferring some files (through the GUI).
The only thing I can think of, is that the device itself is corrupted or damaged, and that I need to be thinking of other back-up options for the future. Any suggestions on disk-doctoring? I'm hoping to do a clean-install of the OS once I back up my files manually.
View 1 Replies
View Related
May 11, 2011
I installed AlienBob's KDE 4.6.2 a few days ago to give it a shot.
I'm really satisfied with it and wish to keep it, but there's one thing bugging me : I can't write to my NTFS USB drives.
To be precise, I can write as much as I want to existing files, but I can't add nor delete files nor directories.
Worse, root isn't allowed either, even in runlevel 1 when mounted by hand (mount -t ntfs /dev/sde1 /mnt/foo).
Did I miss something to configure among the dependencies of KDE 4.6 ?
Output of /var/log/messages
Code:
May 11 08:37:52 rafale kernel: [46953.570204] usb 1-6: new high speed USB device using ehci_hcd and address 6
May 11 08:37:53 rafale kernel: [46954.274818] usb 1-6: New USB device found, idVendor=1058, idProduct=0730
May 11 08:37:53 rafale kernel: [46954.274821] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code].....
View 3 Replies
View Related
