Is TightVNC enable HTTP access inUbuntu 9.04?I use sudo apt-get install tightvncserver in the terminate and I can use VncViewer to view the ubuntu, but i cann't use webbrowser to view the utuntu.How can I access ubuntu in other pc with webbrowser?
View 7 RepliesHow do I get rid of my wubi partition since Ubuntu doesn't work on a Vista laptop. Sorry, it was a gift for Christmas. I never realized Ubuntu was so defective.I am running Windows Vista 32 bit with 3 gigs of ram and one partition from the factory (HP).
View 1 Replies View RelatedIn ubuntu 10.04 LTS I am currently unable to access the location http://192.168.1.1 I have accessed it earlier. This is necessary for modem configuration. I am at a loss why this is inaccessible at present. Can anybody please advise what to do? I am configuring firewall but I doubt if that has anything to do with my problem. Or in case this may be due to faulty firewall configuration, please indicate denial of possible service/program which may cause this. Also ping 192.168.1.1 reports 100% packet loss.
View 8 Replies View RelatedI'm thinking about some ways to limit access to my web-server. It runs Nginx and php in FCGI. The server contains a large amount of information. The data is freely available and no authentication is required but other companies might like to mirror it and use on their own servers.
The requests could be limited on different levels: IP, TCP, HTTP (by nginx) or by the php application. I found some solutions (like Nginx's limit_req_zone directive), but they do not solve the second part of the problem: there's no way to define a whitelist of clients who are allowed to use the data.
I thought about an intellectual firewall that would limit the requests on IP basis, but I'm yet to find such device. Another way was to hack some scripts that would parse the log file every minute and modify the iptables to ban suspicious IPs. It would take days and I doubt this system will survive, say, 1000 requests per second.
Perhaps, some HTTP proxy, like Squid, could do this?
I already installed apache 2 & php 5 .. but I don't know where I create .php pages so I can access them using http://localhost
View 4 Replies View RelatedI am new to web server support. I have a request from my management to modify the logging slightly. Effectively I need to redirect a custom string from our http response into the apache access logs. When a user navigates to our site they receive a "dye" number that is associated with them. This number follows them to whatever cluster they are directed too. The string is formatted as such, com-company-dye: d0a2#6dfce. I need that that header dye to appear in the access logs so we can use that dye number as a key for troubleshooting issues though out our various monitoring systems.
View 3 Replies View RelatedI am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
My server is installed on a guest OS on vmware. It really bugs me because I can't access it from the host OS's browser even though there is no discrepancy between /etc/hosts, /etc/sysconfig/network, httpd.conf files. Issuing ifconfig command also returns the same IP. I have also enabled netwroking in the vmware settings. And I can ping the guest OS's IP from the host.
View 3 Replies View RelatedMy company web access is behind proxy(http://abc.proxy). Network admin can get to check who is top10 user and web they access. I owned a centos server. I have a thought that create an encrypted tunnel within proxy so the admin cant detect my http address. This is how it going to works
client with OpenVPN -> OpenVPN server(centos with company proxy)-> proxy -> internet
My connectivity in my client are using OpenVPN server as bridge. Hence, no record for client is recorded in my Network admin monitoring list. OpenVPN server's activity can be traced by network monitoring tools, just assume that our ultimate goal is to hide client activity.
I've got two routers, 10.0.0.0/23 and 192.168.2.0/24, which are joined by a Linux box with interfaces eth0 (10.0.0.2) and ra0 (192.168.2.2). I've got masquerading for ra0, and a route to 192.168.2.0/24 on 10.0.0.0's router. I CAN ping hosts on 192.168.2.0 from 10.0.0.0 just fine, but I CANNOT access web pages.Strangely, If I enable masquerading on eth0, and add a route to 192.168.2.0s router to 10.0.0.0, I can ping AND access web pages from 192.168.2.0Here is my current iptables
Code:
*filter
:INPUT ACCEPT [0:0]
[code]...
Problems with launching data files of the nas and saving to them is a kde problem. The dot desktop files have to contain access rights for smb/http etc and even when given these it still will not work. I have mainly concentrated on getting the VLC video player to work as it is capable of playing from just about any source, comes with codecs etc etc. Amazing package really.
Pure K apps such as kwrite at least work fine. I tried setting up samba but to no avail.
As dropping a file into VLC's focus didn't do anything I created a vlc desktop icon and dragged the nas file onto that. It plays and a kde error message pops up from plasma shell - can't find file!
I enable kde automount. The content of that when it starts is disturbing. It shows my system disks a detachable and not attached! No need to worry though. I selected mount on log in and attachment where the server was shown. VLC still wouldn't work.
Next I enable NFS file transfers on the NAS. This has allowed me to use open with directly onto an avi file on the nas. I can also click launch them. Remaining problem is opening files on the nas from within VLC. Up pops the kde message "you can only select local files". The file manager here seems to be an instance of dolphin. This suggest that there is going to be a problem saving files to the nas as well. Looks to be the case. VLC can convert formats and all sorts of things. If I select a file locally and try and convert it and save to the nas up pops the "you can only select local files" as soon as I select ok having set the path and file name.
Strange thing is that working transfers seem to be using CIF even though it took an NFS enable to get it partly working via KDE's automount. Dolphin only allows a CIF set up which has a distinct advantage as a direct ip address can be entered. The automount has introduced a very very long delay before kde is up and running following a log in. Samba is even worse in this respect and both seem to lack a method of direct ip input which means they have to find the server.
One other aspect. As far as NFS is concerned from a very recent post elsewhere nautilus works. Pass on CIF. And of course it's all instantaneous and ok on windows even on vista. Enabling the TV protocol on the nas has confused Vista as it only wants to connect like that and needs drivers. Might also be down to having NFS enabled though. MS might not like that.
I have filed all of this on bugzilla if anyone would like to vote - bug number 695648. Seems to me that the CIFs route should be the default for ease with many users on home networks. I'm also sure that the problem is basically KDE preventing aps from accessing the nas.
I need to install a program by using the address http://255.255.255.255. However, when I type this address in my browser, I get the following error: "Failed to connect. Firefox can't establish a connection to the server at 255.255.255.255. Though the site seems valid, the browser was unable to establish a connection." Is there an easy way to put this site into the air?
View 3 Replies View RelatedI am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
i want to access to my samba shares index (or contents) trough http. something like this: [URL] i read something about aliases...i wrote this in the httpd.conf:
[Code]...
I installed Nagios on my Ubuntu 10.04 server using apt-get and when I accessed the web console, everything was OK. I made some changes to apache (creating some new virtual sites) and since then Nagios gives me a warning message for HTTP with the message, HTTP WARNING: HTTP/1.1 404 Not Found. The sites that I created are working perfectly. I noticed that the attemps are 4/4. Does this need to be reset or does Nagios automatically reset that once it detects the issue is resolved?
View 1 Replies View RelatedUsing netcat, nc(1), craft a valid http/1.1 request for getting http headers (not the html file itself!) for the main index page of www dot aalto dot fi. What request method did you use? Which headers did you need to send to the server? What was the status code for the request? Which headers did the server return? Explain the purpose of each header.
nc -v www dot aalto dot fi 8080
HEAD / HTML/1.1
host: www dot aalto dot fi
And it returns:
200 OK
Content-Length: 858
Content-Type: text/html
Last-Modified: Thu, 02 Sep 2010 12:46:01 GMT
[Code]....
I really don't know what does it mean. Question 2: Using netcat, nc(1), start a bogus web server listening on the loopback interface port 8080. Verify with netstat(, that the server really is listening where it should be. Direct your browser to the bogus server and capture the User-Agent: header "Direct your browser to the bogus server and capture the User-Agent: header" I don't understand this question.
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedWanted to restore laptop to Windows 7 and put Ubuntu on another machine.
The Laptop is an Acer and the Win 7 disks go into a propitiatory recovery screen. I have 3 choices reload Win 7 to new state, Load Win 7 and put everything in backup or Exit.
I have loaded the Ubuntu 10:10 Live and downloaded ms-sys. The problem is Ubuntu is unable to mount the HDD - not in fstab.
I have Ubuntu and Win 7 on the HDD.
Here is my problem: I had a 500GB HDD, with the fallowing partitions:
C - 100GB - NTFS - Windows 7
D - 300GB - NTFS - (for staffs)
H - 100GB - NTFS - unused
Yesterday I installed Ubuntu on tha last one (H), wishing to keep also the others two partitions. Now I can not access the first two, I don't see them any more. In my Disk Usage appears only the linux partition and one "Unallocated Space" of 400GB
Do you think that i have a chance to recover my data from the two partitions that I can't see them? code...
I had a Centos install that corrupted the boot and would only boot to GRUB. After about a week of trying linux rescue and various measures I gave up and installed a fresh copy of Centos on /dev/hda which is a 40 GB drive. All my data was on /dev/sda which I did not overwrite and is a 1TB SATA drive. I added sda to the LVM of hda now and is recognized as part of Partition 2 - using the GUI Logical Volume Management. My problem is I can't seem to figure out how to retreive my data from the sda2 drive. This is what I've tried. code...
View 9 Replies View RelatedHow can I enable passphrase along with the password for login via ssh ? In that whenever I login from server A to server B via ssh, it should ask me for a password and then passphrase to allow me access.
OR
Can we have multiple passwords to login via ssh ?My basic need is to have 2 levels of password.
i'm using unr (9.10) and flash player works fine for me, the admin, but not for the other user on the computer. when the other users goes to videos, he gets a message that flash player is not installed or javascript is turned off. i checked and javascript is on.
View 4 Replies View RelatedI am setting up a computing cluster in my lab, as below. all the "eth0" IP addresses are static (for cluster communication) and the "eth1" of the front node is the only one connected to the internet through lab's DHCP server (which is connected to a centralized computer center in the university). The thing I wish to do is to do some sort of IP masquerading to enable all the nodes to have internet access. I actually google around and read some books. The similar things I came across is setting rules in iptables but I did not manage to get any of them working. I am using Ubuntu Lucid 64-bit on all machine.
View 6 Replies View RelatedI've installed ubuntu 10.10 yesterday and i went to check something in my MS OS, im choosing "windows 7 loader XYZ"(XYZ reffers to something sda/....)
in it comes back to the grub menu,
any help please?
im searching for hours for a solution and i can't find.
I am using Ubuntu 10.10 netbook edition.
I have already downloaded the tightvnc-1.3.10_unixsrc.tar.bz2 , the source code for VNC. But I dont know how to install it.
I have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?
How do you enable a login screen? When I turn on my computer I only get command line. When I log into root I can start my KDE desktop using startx. But if I log into any other user I get the following errorX: usser not authorized to run the X server, aborting.giving up.xinit: No such file or directory (errno 2): unable to connect to X serverxinit: No such process (errno 3): Server error.
View 3 Replies View RelatedIs there a way to enable a web interface to access openssh-server on my vps incase i'm on a network that does not permit outbound port tcp 22 or any other port of my choosing?
View 1 Replies View Relatedis there a way to enable a web interface to access openssh-server on my vps incase i'm on a network that does not permit outbound port tcp 22 or any other port of my choosing?
View 3 Replies View RelatedUbuntu desktop 9.04 Whenever I try to copy files to any machine on the network, the transfer stops and I no longer have access to the network or the internet. This happens whether I'm doing scp, copy with the gui, when copying to windows machines, and when uploading database files with phpmyadmin. I have been able to successfully transfer large amounts of data outside of the network via ftp, but not to any on the network. I've discovered that I can re-enable network access by restarting NetworkManager.
View 1 Replies View Related