i want to access to my samba shares index (or contents) trough http. something like this: [URL] i read something about aliases...i wrote this in the httpd.conf:
[Code]...
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares.
2. Scheduling backup of some mount points with rsycn to store data in remote hard disk
3. User and group administration, with sudo access.
4. Creating and Managing Xen Virtual machines and giving access to other project teams.
5. Automating some tasks with Shell Scripting.
6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
I am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
i have 3 shares on my samba. i have users - user, manager and boss projects is RW to everyone reference is R to everyone RW to manager and boss Proposals is RW only to boss, no access to others However when boss logs in and creates a directory in projects share, the directory can only be renamed bu users and manager, and directory contents are read only for users and managers, even deletion / rename is denied. How can i make sure that when ever boss creates a directory in projects, it retains base folder permissions and is writable to user this is my samba file... i am using red hat 6.1 with samba 3.5.6 (i think)
[Code]....
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
I've just upgraded my laptop to Fedora 14 and installed LAMP on it for a test environment. I've followed the official instructions to install but seem to have a problem that I didn't have on F13 or Opensuse. Each time I try to access index.php on localhost I get a permission denied message and an SElinux alert. I have tried 7 different solutions on various forums and just can't view anything in a browser.
/var/www/html has been set to chmod 777
/var/www/html/index.php has also been set to chmod 777
A standard user can definitely read and write to the above files/folder. Until I commented it out the Welcome/Test page was working perfectly.
I have had server running for over a year and have run into my first major issue. I am no longer able to browse to the server by hostname or IP and view all available Samba shares. I receive a windows popup informing me I do not have permissions However I am still able to browse to the shares themselves \hostnameshare.I am currently assuming this is an issue with the config of the samba share module/
View 2 Replies View RelatedI can't access some folders on my samba share. For example I set the Video folder to share and to allow creating or moving files. But inside the video folder I cant access some folders. This only happened after I upgraded my samba client.
View 5 Replies View Relatedfind that i cant access from my ubuntu box (desktop), now running 11.04 (i was able to access yesterday, when i tested the config). I CAN access from my XP and Win7 virtualboxes.and also from another win7 on the house.. So server is working good aparently.This is all i modified from the default config file:
Code:
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
[code]....
First off a little history of me lol. I'm not completely a Linux noobie, but I'm not the most advanced user either. With that said I have a few interesting problems with Samba.First off I can see the NetBios name under Windows Networking (Windows 7), however everytime I try to connect to it I get an Access Denied and/or "Incorrect Password/Username" error. I have gone into secpol.msc and changed the values that other posts have suggested. Both the server and the workstation are located under the same group, and I have used the smbpasswd -a <username>. The server is not configured to be a Primary Domain Controller so.. I'm lost. Infact my brain hurts from 3 days of this. I have posted my SMB.CONF file to see if that helps. Hum.. Maybe I'm just trying to access a file share that isn't there..
View 13 Replies View RelatedI am new to web server support. I have a request from my management to modify the logging slightly. Effectively I need to redirect a custom string from our http response into the apache access logs. When a user navigates to our site they receive a "dye" number that is associated with them. This number follows them to whatever cluster they are directed too. The string is formatted as such, com-company-dye: d0a2#6dfce. I need that that header dye to appear in the access logs so we can use that dye number as a key for troubleshooting issues though out our various monitoring systems.
View 3 Replies View Relatedit's driving me nuts. Done a few things now, including this last: [URL]that didn't work. All the other comps in the house are windows 7, and I want this box to be my file server, with two 1 TB HDD plugged into it via USB, but I can't get the damn samba to allow access to everyone. Here's the path in the config file:
[data]
comment = Test sharing
path = /media/Shared
[code]....
I recently upgraded my ubuntu samba fileserver to 10.04 along with increasing the size of my RAID 1 /home directory.I am using the same smb.conf file setup I have used on intrepid ibis setup and hardy heron setup before that.On my new setup, I can see the ubuntu server on my windows 7 machines, but I can't see the shares and can't access them.In checking the logs (/var/log/samba), one log continues to look for a printer share from one Windows machine that I have not set up on samba yet.
I have found a few people who have reported similar problems online, even a few who have filed bugs, but then they say "my computer started working suddenly. I don't know what happened." so they closed the bug. or "my computer started working after I rebooted my machine." I have rebooted all machines on the network. That doesn't fix it.
I can see mycomputer on the network, but not the share. Not sure what to do, why isn't the share available?
View 1 Replies View RelatedI recently switched from centos to fedora as my server choice. Probably not the best decision but I like trying new things. Now before I switched I had my samba server setup just they way I wanted it. Now I'm having a hard time getting it back to that way. Here is my smb.conf
Code:
[global]
workgroup = workgroup
netbios name = netbios name
server string = Linux Server
security = user
wins support = yes
encrypt passwords = Yes
domain logons = yes
[homes]
comment = Home Directories
browseable = yes
writable = yes
valid users = %S
[me]
path = /home/me
read only = no
public = yes
create mask = 0777
directory mask = 0777
browseable = yes
writable = yes
Now I did throw away my old smb.conf because it wasn't that complicated and I figured I could reproduce it.. aside from that everything is working except for the fact that I can access any share I want to listed without it requesting a password. I have a username and password setup with smbpasswd and I think everything else is setup correctly involving samba shares but I have no idea why it won't request a password.
So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.
I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it
I am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
I am traveling to the UK next week, and whilst I am there, I need to be able to access my SAMBA shares hosted on my HOMESERVER, via my laptop in england.
I have tried Hamachi before, which works fine on windows, but the linux version is awful, and hardly works. So I need an alternative. I did a bit of googling, but I don't know what "bridged" means when I found a OpenVPN tutorial
I was wondering if anyone could give me some information as to what I'll need, and what I'll need to do on both my homeserver and my laptop?
I have a few ubuntu servers which have samba shares on the network and for the most part have had little trouble with them. Recently we purchased a few iMac's for one of our deptartments and, while we're able to access the shares, all the files on them are read-only and we are unable to delete/modify files using the iMacs. This is not an issue with any of our windows machines (W2K, WinXP, Vista).
View 2 Replies View RelatedI'm quite new to ssh tunneling but I now want to make one of my machines at home accessible to my lan network here. I used the following command to make it available trough 127.0.0.1:5555(lo interface):
ssh -L 5555:192.168.0.15:80 me@xx.xx.xx.xx -N
now I want to make it available to eth0 on 192.168.1.40:5555 How do I do this?
I'm trying to set up a computer to allow a specific samba user to access and write to a folder on the web-server without any luck. I've tried creating symbolic links in the users home to the folder (/var/www/html/something) on the web server and from the server to a directory in the users home but neither seems to work. I haven't seen any errors from SELINUX either but I'm kind of stuck. Also tried adding a directory section and alias line to the httpd.conf but after doing that apache wouldn't start so I'm not really sure how this would be done properly.
View 1 Replies View RelatedIve managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?
View 7 Replies View RelatedDoes anybody know if there is a quick and easy way to simply disable samba security to avoid "Access Denied" errors when trying to access shares via Windows XP?
View 2 Replies View RelatedI have setup CentOS 5.5 with SAMBA 3, configured all my Unix users, Samba users and shares. My server hostname is REL3
[root@REL3 ~]# smbclient -L REL3
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1]
[code]....
The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies View RelatedFor some of the files that I share using Apache, I want to make sure that they are served ONLY via https.
How can I configure this for Apache?
I'm trying to modify my Linux server's Samba config so that each user gets their own private folder, in a similar way to having a private 'home' folder. Is it possible to create a samba share that maps to different places, depending on username? E.g if 'bob' connects they see the contents of /documents/bob and if 'fred' connects they see the contents of /documents/fred, and so on?
(I know this is what the [homes] share does, but I want another specifically for each user's private documents that won't get mixed with all the Linux user cruft such as dotfiles and things)
I'm trying to connect to a Samba share on a VirtualBox'ed Windows 7 that is connected to an openSUSE host in bridged mode. For reasons beyond my comprehension I cannot use the shared folders feature, so I'm using Samba instead. I configured a share through openSUSE's Samba server configuration tool:
[iTunes]
inherit acls = Yes
path = /home/myusername/iTunes
read only = No
valid users = myusername
I also set a password for this user using smbpasswd -a myusername. I can go to smb://192.168.1.6 on the host machine and log in to the share successfully, but on Windows 7 I see this: What am I doing wrong? I can connect to the shares list without any problems. It's just the login that doesn't work.
Update: I noticed that my Samba server is part of the WORKGROUP domain.
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64]
Sharename Type
[code]....
I'm using ubuntu 10.04 (gnome) - at some point, I had manually mounted a samba share on the home fileserver,
mount -t cifs //homeserver/sharename /serverfiles
It now boots up automatically every time, which is definitely convenient but I don't know how it's being done. I'm going to be mounting the same share using sshfs when I'm away so I'd like to know how it works. When I googlify this, there is mention of altering fstab (which has not been done) or gnome-mount (which does not seem to be it). There is nothing in preferences/startup applications, what is the automounting mechanism being used?