Ubuntu :: Integrated Card Reader Doesn't Work And Causes Mouse To Hang At Startup
Nov 24, 2010
Everything worked fine in Kubuntu 10.04 (64-bit). On the upgrade to 10.10 (64-bit) it takes about a minute until I can move the mouse after startup and the integrated memory card reader doesn't work (but the green LED which used to only come on when there was a card in there is now always on). This has been discussed twice before: here (closed and solved by unplugging cardreader which I do not want to do) and here (unsolved but closed as maverick no longer in beta) dmesg (note the errer -110) follows. Let me know if I can/should include any other logs/info!
Code:
[ 13.575002] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.790470] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.903728] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.280020] usb 1-5: device descriptor read/64, error -110
[ 17.375755] sky2 0000:02:00.0: eth0: enabling interface
[ 17.376174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.377028] type=1400 audit(1290608578.996:5): apparmor="STATUS" operation="profile_load"
[Code]......
View 2 Replies
ADVERTISEMENT
Feb 13, 2010
When I insert the xD card into the built-in 5 in 1 card reader of my laptop it doesn't work. An SD card for example does work with this reader, so it is not a "faulty hardware" problem we are talking about right now, and neither is a "HW is not recognized" kind of a problem. My card reader is seen as a
Code:0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)in the lspci output.I use debian testing with a 2.6.32-trunk kernel (what is this "trunk" here anyway?)I know this isn't a unique problem and with a cheap external USB powered card reader (I have one) this whole thing can be worked around, but still.
View 2 Replies
View Related
Apr 22, 2010
Based on [URL], I'm having I believe the same issue. FC12 x64, Inserting a XD card shows in messages: Apr 22 11:05:21 localhost kernel: tifm_core: SmartMedia/xD card detected in socket 0:0 However nothing beyond that. (no folder opening, nothing mounted). lspci says:
05:0b.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
05:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
05:0b.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
So, based on the previous link I mentioned, I
setpci -v -s 05:0b.2 4c=0x22
but get
setpci: Missing width. Any hints as to what I'm missing? Would love to be able to get this to work.
View 1 Replies
View Related
May 2, 2011
I have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
View 1 Replies
View Related
May 11, 2011
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
View 13 Replies
View Related
Aug 19, 2010
Have this setup:
Problem is when srv01 has problems and is taken offline from the network, all the pc01-pc20 computers freeze, you can move the mouse but the menus don't work, you can go restart or shutdown either. only solution at this time is to turn it off or restart through the button on the pc case.
View 2 Replies
View Related
Dec 11, 2010
I just installed SuSE 11.3 (running KDE) and I cannot get compiz to work on it. This is an old laptop with an SiS 660 integrated graphics card which has installed correclty except for the 3D acceleration. I did my homework and looked around before posting this but all I found was this.
1. 3D acceleration for SiS 660 through swrast stopped working when SuSE 11.1 came out [URL] and apparently there's no easy fix for this today. I went to the card manufacturer website [URL] and found no support for SuSE. I tried the mesa drivers and none seemed compatible.
2. I downloaded the compiz repos anyway and followed the instructions in this tutorial: [URL], but it didn't work. So my questions are (a) HOW DO I GET 3D TO WORK FOR THIS GRAPHICS CARD??? and (b) IS IT POSSIBLE TO GET COMPIZ TO WORK WITHOUT 3D ACCELERATION, AND IF SO HOW? I'm an enthusiastic but inexperienced penguinista, so I hope to find an answer to this issue here.
View 2 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
Feb 25, 2010
My multimedia card reader does not work with new ubuntu version fresh install:
lsusb says:
Code:
Bus 001 Device 002: alcor micro corp. multimedia card reader
dmesg:
Code:
[6.544269] usb-storage: device scan complete
[6.544848] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[6.545482] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[6.546102] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[6.546728] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[6.547227] sd 2:0:0:0: Attached scsi generic sg2 type 0
[6.547338] sd 2:0:0:1: Attached scsi generic sg3 type 0
[6.547439] sd 2:0:0:2: Attached scsi generic sg4 type 0
[6.547550] sd 2:0:0:3: Attached scsi generic sg5 type 0 .....
View 2 Replies
View Related
Jun 28, 2011
I can't seem to get my card reader to work. The USB port on the reader works and sometimes I can read my SD card. Usually, nothing shows up in the media/ folder. I looked at this write-up [URL]... but I'm not sure if this is what I should do. Here are some info I was able to pull up:
sg_scan -i Code:
/dev/sg0: scsi0 channel=0 id=0 lun=0 [em]
HL-DT-ST DVD-RAM GH22NP20 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5]
/dev/sg1: scsi0 channel=0 id=1 lun=0 [em]
[Code]...
View 7 Replies
View Related
Sep 1, 2010
I have installed Ubuntu 10.04 32 bits version on a desktop PC. Every thing works OK, exept for a USB hub and card-reader combination from IN-WIN Inc. I could not find a clue on the Internet.
The manufacturer and apparatus code is: ID 10df:0500 (as from "lsusb").
Below I have listed all the hardwire of the PC, as obtained from "lshw". The italic part at the bottom deals with the IN-WIN module. I suspect that it may have to do something with the "emulated scsi-host" thing, of which I just know nothing about.
JGMS:
View 2 Replies
View Related
Jul 13, 2015
I have a Thinkpad X220 (stretch/sid) with a built-in SD card reader.But when I plug in an SD card it won't show up in the file manager (thunar), nor as a /dev/sd* or /dev/mm*.. URL...
Code: Select all$ udisksctl status
Just my internal SSD shows up.How do I get my SD card reader to work?
View 5 Replies
View Related
Dec 9, 2009
I could use some instructions on how to get firefox to read and use my cac card. Under Yast the card reader shows up in hardware. I have install pcsc ccid and coolkey through Yast but not sure if I need to do anything else. I have followed instructions for loading the device in firefox but it does not load my certs off of the card.
View 8 Replies
View Related
Aug 7, 2010
I found a solution to my card reader problem in a another fedora post but when I type the code in terminal I get:
all config files need.conf /etc/modprobe.d/blacklist
How to write this code so I wont get this error and I can load these modules and also how to edit the modprobe.conf.
The code is below, using fedora 13.
You must load these two modules to work with card reader.
First : Remove the card from the Reader!
AS superuser type in console :
1. /sbin/modprobe tifm_core <enter>
2. /sbin/modprobe tifm_sd <enter>
If you want to automate these modules loading do the following :
edit the /etc/modprobe.conf file
add these :
alias mmc_core tifm_core
alias mmc_card tifm_sd
View 2 Replies
View Related
May 10, 2010
I just installed opensuse 11.2 on my laptop in a dualboot configuration with windows 7.I prefer using suse, but also recognize, that once in a while, windows is useful.One of the things i like to do in linux is handle my photos with f-spot/gimp, but for some reason my laptops built in card reader is not recognized by the system. If a card is inserted, it doesn't even show up in the partition manager..?I'm not completely new to linux, but i'm not an advanced user either, so i can't figure out what to do here
View 5 Replies
View Related
Aug 12, 2009
Does any one know about fingerprint in HP dv4 to work.
fprint is installed but didnot detect the reader.
Code:
lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 2 Replies
View Related
Jun 7, 2010
The mouse has been working fine ever since we got Ubuntu 10.04, until I switched monitors. For some reason, after changing monitors from 4:3 to 16:9 and back, (changing the output res in the process), the mouse doesn't appear when starting up the computer. It still highlights things, and it will pop up completely when searching for something on Google Chrome, and a few other things. But for some reason, the mouse doesn't appear right away when starting up the computer. I'm not sure why this happened -- I'm new to Ubuntu, (used to Windows)
View 1 Replies
View Related
Mar 29, 2011
I have problem with my Genesys Logic memory card reader. I'm trying to read SD-memory card. When I put the memory card in to the card reader, nothing happens. Also ls /dev/sd* don't show any new drives/partitions.Here is my dmesg when I put the card in:
Code:
[ 2808.136056] usb 1-5: new high speed USB device using ehci_hcd and address 82
[ 2808.264921] usb 1-5: New USB device found, idVendor=05e3, idProduct=0710
[code]....
View 4 Replies
View Related
Oct 15, 2009
This isn't exactly a Linux question, because it also happens with the Windows version, but I've got a pdf file with a number of images in it. When I try to copy the image, it works except the pasted image is just a blank rectangle.I've tried this with The Gimp on Linux and Windows, Photoshop Elements on Windows, and some other programs. I get similar results from all of them. Sometimes the rectangle is transparent, sometimes black, but never the image I've selected. However the rectangle does appear to be the size of the selected image, so something is being picked up.
View 6 Replies
View Related
Jul 24, 2010
I try to run a bash script when the machine boots up. I followed the exactly the same procedure as stated in [URL] I tried to use update-rc.d and rc.local. The both ways still dont make the bash script automatically run when it boots up in Ubuntu 9.04. The script can be successfully executed when I log in as root and run it manually.
View 5 Replies
View Related
Jun 23, 2010
When I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
View 2 Replies
View Related
Oct 30, 2010
I just installed Ubuntu 10.10 I love it. The only problem is my built-in mouse doesn't work. My usb mouse works fine but not the built-in one. When i was installing Ubuntu i used the USB mouse, The only problem is my mum needs it for her computer.
View 1 Replies
View Related
Oct 31, 2010
When I start firefox the mouse seems captured by it.I can use the mouse inside the firefox screen (change tabs, use menu, select/paste) but not anywhere else. Even if a popup appears (site wants to register a cookie) then I can only use the keyboard to "ok" it. alt-tab to another window is not possible.Using the mouse in the gome-panel won't work.I can get the mouse pointer anywhere on the screen but mouse clicks don't seem to register. I've had this problem before on 10.04 and the only thing that worked then was to create a new useraccount (a lot of hassle).
edit: The window manager also won't react to the mouse so closing the firefox window is not possible using the windowmanager buttons(X - 0)It's also not limited to Firefox,after I closed firefox via it's menu and then started a gnome-terminal the mouse was caught in that. After closing the gnome-terminal and restarting firefox it degraded even further in that the mouse would'nt even work in the window itself anymore.Only a reboor would reset the problem.
View 4 Replies
View Related
Dec 16, 2010
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies
View Related
May 5, 2011
I installed a fresh copy of 11.04 which worked fine until you first login and then the left mouse button fails to work so I can't left click anything. The right ones is fine? this worked fine on 10 and for the 11.04 installer.
View 9 Replies
View Related
Oct 10, 2009
I have a 5 button mouse and the 4th and 5th buttons are useful for skipping back or forwards while surfing with Firefox. It would be nice if I could skip back in Nautilus too, but it doesn't work. (Alt+LeftArrow & Alt+RightArrow as keybord equivalent) Is there a possibility to use this buttons in Nautilus too?
View 6 Replies
View Related
Apr 22, 2010
i have a regular ole USB mouse and got a USB hub to expand the number of ports i have. I connected my USB mouse to the hub which worked in Windows but when i booted up linux the mouse did not work. If i plug the mouse in directly then it works again but i would like to figure out how to make the mouse work using a hub but am not quite sure where to start,
View 6 Replies
View Related
Jan 30, 2010
I have installed fedora ver 10 on my PC. The issue is that my mouse does not work once i login, it hardly works for 5-10 mins and then does not respond, however system does not get hung. I am using USB optical mouse. Please help me in fixing the issue.
View 4 Replies
View Related
Feb 27, 2010
I have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
View 4 Replies
View Related
Oct 11, 2010
After booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.
View 9 Replies
View Related
