Hardware :: Laptop And Texas Instruments Integrated Card Reader: Setpci Missing Width
Apr 22, 2010
Based on [URL], I'm having I believe the same issue. FC12 x64, Inserting a XD card shows in messages: Apr 22 11:05:21 localhost kernel: tifm_core: SmartMedia/xD card detected in socket 0:0 However nothing beyond that. (no folder opening, nothing mounted). lspci says:
05:0b.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
05:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
05:0b.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
So, based on the previous link I mentioned, I
setpci -v -s 05:0b.2 4c=0x22
but get
setpci: Missing width. Any hints as to what I'm missing? Would love to be able to get this to work.
View 1 Replies
ADVERTISEMENT
Nov 7, 2010
Does anyone use a TI calculator with Slackware for developing and transferring apps?
View 1 Replies
View Related
Nov 24, 2010
Everything worked fine in Kubuntu 10.04 (64-bit). On the upgrade to 10.10 (64-bit) it takes about a minute until I can move the mouse after startup and the integrated memory card reader doesn't work (but the green LED which used to only come on when there was a card in there is now always on). This has been discussed twice before: here (closed and solved by unplugging cardreader which I do not want to do) and here (unsolved but closed as maverick no longer in beta) dmesg (note the errer -110) follows. Let me know if I can/should include any other logs/info!
Code:
[ 13.575002] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.790470] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.903728] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.280020] usb 1-5: device descriptor read/64, error -110
[ 17.375755] sky2 0000:02:00.0: eth0: enabling interface
[ 17.376174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.377028] type=1400 audit(1290608578.996:5): apparmor="STATUS" operation="profile_load"
[Code]......
View 2 Replies
View Related
Sep 2, 2011
I'm running openSUSE 11.4 on an HP 630 laptop with KDE. Everything works fine but cards inserted into the internal SD card reader are not read, and from what I can tell the reader is not recognized at all by openSUSE on my system. The reader does not appear listed in hardware information and is not listed with the command fdisk -l . There appear to be no references at all to the reader. The reader is recognized, however, on a live USB of Linux Mint 11, where the model is listed as "Generic - xD/SD/M.S." (the vendor too), revision 1.00. It is listed as an SCSI Controller scsi5. Typing lsscsi in the termal of openSUSE provides the following:
Code:
linux-mlxx:/home/eve # lsscsi
[0:0:0:0] disk ATA Hitachi HTS54323 ES2O /dev/sda
[1:0:0:0] cd/dvd hp DVDRAM GT30L mP06 /dev/sr0
lspci provides:
[Code]...
View 8 Replies
View Related
Jan 29, 2010
I have successfully installed Ubuntu 9.10 on an HP Pavilion laptop (dv6130US)Although I have not checked everything out, I believe the only hardware issue I have (so far) it getting the media card reader to work.I used the lspci command to determine if the memory card was recognized and got the following response (I've only copied what I believe to be the relative info)05:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C8321394Controller05:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)05:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)05:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)05:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)I then created a directory in /dev called mcr sudo mkdir /dev/mcrand created a directory in /media called mcrsudo mkdir /media/mcrI then tried to mount the cardreadersudo mount /dev/mcr /media/mcrbut I got the following errormount: /dev/mcr is not a block device
View 3 Replies
View Related
Jan 20, 2010
Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
View 5 Replies
View Related
Mar 22, 2010
A couple of days I started using latex and have still one question about the table width. My table is too wide for a page. How can I adjust it so that it fits on the full width of a page? Can I use a command or do I have to specify each column widths by hand?
My table looks like this;
I did try several commands likeextwidth, esizebox, setlength but didn't found the solution yet.
View 2 Replies
View Related
Jul 1, 2010
I use ioctl to get the cosole window size (the SSH window).
I use the following code:
When I debug on linux pc, it gives me the correct window width. But after I try it on router (this is my enventual place where my code shall run), ioctl always give me 0 width, that is, numberOfColumnsOfTerminalWindow == 0. but the returnValue is 0 which means that the function call succeeds.
View 2 Replies
View Related
Jan 29, 2010
I just finished installing a fresh install of openSuse on my old Compaq Presario V2600 laptop. The problem is, for some reason, it always boots to the terminal instead of starting x and the gnome desktop environment. I have to manually start x every time with the command startx. Then, after x has been started, the display is an unusually low resolution, and it wont let me change it. I tried running sax2 -r -m 0=vesa but this did not help fix the problem.
The second problem I am having is that my integrated wireless on the laptop does not work. It is a Broadcom 802.11 b/g WLAN. Please help with this as well (I know I will probably have to use proprietary drivers just like I did in Ubuntu, but I can't find how to install these drivers under openSuse.) If you need to know more about the specs of my laptop, here you go:
Make/Model: Compaq/Presario V2600
Processor: AMD Mobile Sempron 3100+
Graphics: ATI Radeon Express 200M
RAM: 512 MB
Operating System(s): Dual Boot between XP Pro and openSuse
HDD: 40GB SATA
View 3 Replies
View Related
Aug 24, 2010
I'm using a lenovo notebook with switchable graphics (Intel HD and ATI Radeon 5650), and I'd like to have Ubuntu use the integrated graphics, but I can't figure out how. The BIOS has two graphics options: switchable and discrete. On discrete just the ATI card runs, but on switchable, it seems like both cards are being used. Is it possible to use just the integrated graphics?
View 8 Replies
View Related
Nov 22, 2010
I have a Dell laptop studio 1735 with a integrated webcam. The webcam seems to be recognised without issue:
1) dmesg | grep Webcam
Code:
Product: Laptop_Integrated_Webcam_2M
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input13
And in the Hardware Info applet I found the following:
Code:
: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: +rmv.ZLiQYW8YBnE
[code]....
The manifacturer is:
manufacturer = "SONiX Technology Inc."
Do I have to install a special application? Or edit a configuration file in order to make it work?
View 6 Replies
View Related
Oct 31, 2010
I've been using slackware64 13.1 ever since it came out on my Dell Inspiron 1525, and I haven't really had any problems with my webcam in that time. However, last time I tried to use skype - I noticed that it couldn't detect it.
In kinfocenter, my webcam is picked up (OmniVision Technologies). The only time I've had a similar problem in the past is when I used the "Compact" option in lilo.conf, and the webcam wouldn't turn on. Just removing the option solved the problem.
Since I don't know what steps caused this to happen, I'm not sure where to start fixing it
View 2 Replies
View Related
May 24, 2009
I have installed Fedora 10 on my laptop, but I cannot start GUI at all. Besides, I cannot get sounds, either.... lspci gives me following infos: 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller 01:00.0 VGA compatible controller: VIA Technologies, Inc. Integrated Video my laptop is a little bit out of date, sound card and video card are integrated.
View 3 Replies
View Related
Jun 5, 2011
I've just installed the latest version of Ubuntu (11.04) on my Lenovo S10-3 netbook. Everything works just fine, except the mobile mobile broadband.
The system doesn't seem to recognize the (integrated) SIM card slot. The SIM card slot is already integrated (it's located under the battery). I can add a new broadband connection manually, but it still doesn't work (I can't select it from the available connections). If I open-up the additional drivers manager, it doesn't show me any available drivers.
View 2 Replies
View Related
Apr 8, 2010
I have a DFI RS482 mobo with integrated sound. I am making a car puter and only have a 2GB CF card, so I installed a server install of Ubuntu. Then I got xserver-xorg, mplayer, and fluxbox. I downloaded and installed the latest nvidia driver. Mplayer spit out tons of sound errors and that's when I realized the server install has no sound. So I installed the 'alsa', 'pulseaudio' and 'pavucontrol' packages. Now mplayer does not complain and acts like it is playing sound, but nothing happens sound-wise. Pavucontrol shows mplayer as playing sound and the volume as unmuted. However the PCM output is going to "dummy output" and the configuration tab says there are no cards to be configured.
So I think my sound card is not being detected. I don't know what to do at this point.
lspci shows "Multimedia audio controler: ATI Technologies inc. IXP SB400 AC'97 Audio Controller (rev 80)"
alsamixer fails on "function snd_ctl_open failed for default: No such file or directory"
lsmod | grep 97 returns a bunch of stuff, but I'm not sure what it is.
View 4 Replies
View Related
Dec 11, 2010
I just installed SuSE 11.3 (running KDE) and I cannot get compiz to work on it. This is an old laptop with an SiS 660 integrated graphics card which has installed correclty except for the 3D acceleration. I did my homework and looked around before posting this but all I found was this.
1. 3D acceleration for SiS 660 through swrast stopped working when SuSE 11.1 came out [URL] and apparently there's no easy fix for this today. I went to the card manufacturer website [URL] and found no support for SuSE. I tried the mesa drivers and none seemed compatible.
2. I downloaded the compiz repos anyway and followed the instructions in this tutorial: [URL], but it didn't work. So my questions are (a) HOW DO I GET 3D TO WORK FOR THIS GRAPHICS CARD??? and (b) IS IT POSSIBLE TO GET COMPIZ TO WORK WITHOUT 3D ACCELERATION, AND IF SO HOW? I'm an enthusiastic but inexperienced penguinista, so I hope to find an answer to this issue here.
View 2 Replies
View Related
Jul 5, 2010
Here are my Specs:
Netbook: HP Mini 210-1012EZ
Network Card: Broadcom Corporation BCM4312 802.11b/g (rev 01
Ubuntu: 10.04 Netbook Remix
CPU: 32Bit
Wired and Wireless Networks work perfectly the only issue is the Mobile Broadband. When I try to setup my Mobile Broadband connection manualy using the Network Connections Manager the device drop-down is grayed out and it doesn't seem like my network card is being recognized as a Mobile Broadband Card. When I had Windows 7 installed and started ubuntu over a USB Drive the connection worked great. I've followed the steps at [URL] too and it all checked out.
I found another idea in a thread here and I've tried that too:
I added the following line to my /etc/modules:
echo b43 | sudo tee -a /etc/modules
I've also tried using the Broadcom STA drivers that ubuntu offers but it doesn't seem to make any difference.
View 1 Replies
View Related
Apr 8, 2011
I have Ubuntu Natty installed on my computer, and I cannot activate the desktop effects and animations. I know that they can be activated, as I used them on Gutsy, but they have somehow been disabled during an update. I want to reactivate them, but every time I try I am told that they cannot be activated because the right graphic card drivers are missing. I have an integrated Intel card on my computer. Is there any way I can reactivate the visual effects? If not, how was I able to activate them in Gutsy?
View 1 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
Jul 7, 2011
it was working but after i installed updates and rebooted it could not get a ip address seems like strange timing it still registers under ifconfig it is not even working on the live usb anyway i can test to be sure it is the chip?
View 3 Replies
View Related
Apr 8, 2011
i don't see my sd card reader ?(under xp this card reader "works" but don't read datas ?)
hwinfo give
57: SCSI 00.0: 10600 Disk
[Created at block.254]
[code]...
View 14 Replies
View Related
Apr 21, 2011
Been using Ubuntu for 1 yr now on my Dell Dimension 8250 but a newbie with my Averatec AV3270-EH1 laptop circa 2005. Ubuntu 10.04 does not detect the Integrated WLAN card/adapter. I've looked at all the forums/posts but none had the issue I have. When I type lspci into the terminal i get this back:
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
[code]....
And when I type in iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
View 1 Replies
View Related
Dec 6, 2010
I have all of my music on an SD card so it doesn't take up space on my hard drive. I put it into my SD card reader and ubuntu is all like, "gtfo doesn't exist."
View 2 Replies
View Related
Mar 30, 2011
I have installed Ubuntu 10.10 in my system. I have plug in th USB card reader but it is not detected. Eventhough the same card is detected when I'd pluged in at last night and I have just browse the folders in the memory card.Then I just right click on the icon in media folder and click eject the texts in file /var/ log/messages for above operation.
View 2 Replies
View Related
Apr 9, 2010
I am very new to Linux. I installed ubuntu 9.10 on my Acer 3050 aspire. It works very well except for a few issues. I can not use my 5 in 1 card reader, nothing shows up in "computer" except "cd/dvd" and "file system". My lg phone does not show up when using my data cable as mass storage, and the touch pad is too sensitive, (i have adjusted the settings listed under mouse/touchpad but to no avail. The biggest problems is the card reader and phone. Can this be fixed?
View 14 Replies
View Related
Mar 20, 2010
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies
View Related
Jul 13, 2015
I have a Thinkpad X220 (stretch/sid) with a built-in SD card reader.But when I plug in an SD card it won't show up in the file manager (thunar), nor as a /dev/sd* or /dev/mm*.. URL...
Code: Select all$ udisksctl status
Just my internal SSD shows up.How do I get my SD card reader to work?
View 5 Replies
View Related
Jul 18, 2011
Stuck an SD card into my laptop (acer timelinex 5830tg) for the first time today, and to no avail. I've done an lspci, but don't seem to see my card reader there. here's the output
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 1050 (rev a1)
02:00.0 Ethernet controller: Atheros Communications AR8151 v2.0 Gigabit Ethernet (rev c0)
03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
I'm running kernel 3.0-rc6. Issue still remains when booting into 2.6.39 also.
View 14 Replies
View Related
Aug 4, 2011
I've recently purchased a Lenovo Ideapad z470, and installed Debian Wheezy amd64 on it first thing. I was pleased to find that almost everything worked "out of the box." The only problems were the hotkeys and the card reader. I don't care if the hotkeys ever work, but the non-working card reader is more aggravating than I anticipated. I would be most obliged if anyone could lend a hand.So, first things first, here's the output of uname -a:Linux cerulean 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/LinuxHere's the syslog output upon inserting an sd card into reader:
Jul 25 22:19:45 cerulean kernel: [11472.262103] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Jul 25 22:19:45 cerulean kernel: [11472.354801] usb 1-1.3: New USB device found,
[code]....
View 6 Replies
View Related
Dec 9, 2009
I could use some instructions on how to get firefox to read and use my cac card. Under Yast the card reader shows up in hardware. I have install pcsc ccid and coolkey through Yast but not sure if I need to do anything else. I have followed instructions for loading the device in firefox but it does not load my certs off of the card.
View 8 Replies
View Related
