Debian Installation :: No Boot - Fails To Recognize Drive As Bootable
Sep 22, 2015
Debian 8 "Jessie"
AMD CPU
EFI motherboard
System was working reliably. Moved components into a new case. Now system will not boot. Either gives error that the disk is not bootable or displays the motherboard configuration screen.
I am able to boot Debian with a USB drive and have attempted fixes in "rescue mode".
I confirmed that the system is booting to EFI mode.
I have tried re-installing the grub-efi package and re-creating the Grub config file with update-grub.
When re-installing Grub I receive "Discarding improperly nested partition ..." warnings but the installation succeeds. I have searched this warning message and the forums seem to say that it can be ignored.
I have tried re-setting the motherboard NVRAM using the jumper block.
The computer shows "debian" as a boot choice in addition to the usual raw drive model listing. However, neither of the choices will boot successfully.
View 4 Replies
ADVERTISEMENT
Oct 14, 2014
I am currently trying to install Debian Wheezy 7.6 x86_64 on an Intel Server System R2224GZ4GC4, but the Installer doesn’t recognise any of the devices attached to the onboard SATA controller.
Debian Version
Debian Wheezy 7.6 x86_64
Hardware used
Server: Intel Server System R2224GZ4GC4
Motherboard: Intel S2600GZ4
Onboard SATA Controller: Intel Patsburg 4-Port SATA Storage Control Unit (rev 06)
Device on Port 0: Samsung 840 Pro Series SSD
Device on Port 1: Samsung 840 Pro Series SSD
Device on Port 2: Samsung 840 Pro Series SSD
Device on Port 3: Intel 510 Series SSD
While the onboard SATA controller does support so-called “fake RAID,” this ‘feature’ has been disabled (i.e., the BIOS setting “SAS/SATA Capable Controller” is set to “INTEL(R) RSTe”). This is confirmed by the controller during the boot-up URL...Weirdly enough, the Intel 510 Series SSD contains an old system (Debian Squeeze 6.0, Kernel 2.6.35-5-amd64), which can boot and which does recognise all SSDs.
Remedies tried
* I’ve compiled the list of SCSI, SAS and block device related modules that the Squeeze-System, which recognises the SSDs, used and manually loaded these modules during the install process.* I’ve tried to rescan the SCSI bus by:
Code: Select allfor host in /sys/class/scsi_host/*; do echo "- - -" > $host/scan; done* I’ve tried to remove all disks, save for the Intel 510 Serives SSD.* I’ve tried all of the above combined.
View 2 Replies
View Related
May 19, 2015
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
View 7 Replies
View Related
Aug 9, 2011
I would like to build an oem style install partions that is bootable with menu to choose if I want to run install or boot already installed system. I would like to include current source packages on the same dive so if I don't have internet access at time of install, can can still install what I need.I know with Windows Vista and Windows 7, you can get this but how can I do this with Debian?
View 1 Replies
View Related
Dec 4, 2010
I have a 1.0 ghz G4 eMac running Tiger. Using Ubuntu 10.04's Live-CD I installed 10.04 on a 8-gig USB flash drive and it worked very well despite spending nearly five hours to download its files via DSL and a pokey USB 1.1 port. The flash drive's 10.04 installation worked just fine on my eMac and 900mhz G3 iBook except for Airport wireless non-connecting issues.(I like Ubuntu 10.04 because unlike Mint for PPC, you're not hassled or barred from accessing your Mac HD and its files.) THEN, to resolve my wireless issues, I decided to upgrade to 10.10 which took nearly 12 hours, and it seemed to've installed well until I tried booting the flash drive and it doesn't work. I get the Ubuntu icon in the Startup Disk screen but it keeps returning to it even after I select Ubuntu. The error screen I get reads code...
View 5 Replies
View Related
Dec 13, 2010
I am operating Ubuntu 10.10 installed to disk on a desktop and trying to create a bootable USB of the same to install on my netbook. I am using the instructions found here but every time I try to create the bootable USB, it fails. I get various error messages, such as:
Code: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Code:
An uncaught exception was raised: [Errno 5] Input/output error or others. I think I've seen four or five others. Once I got 80% finished then it failed with a generic error stating that creating the bootable disk failed. I've tried formatting the USB drive as ext3, ext4, NTFS, and FAT, but I always get failures. I am writing from a physical CD, the same one I used to install the 10.10 that I am posting from.
View 2 Replies
View Related
May 27, 2011
My old computer started randomly rebooting so I went out yesterday and bought a new one. It's a standard Intel 64 architecture with 2gb ram etc.The old computer was running Lenny however I'm happy to upgrade, so I just went to the main Debian download site and downloaded:debian-6.0.1a-ia64.netinst.iso (this didn't work, apparently ia64 is for itanium and my machine is definitely not that), so I downloaded: debian-6.0.1a-amd64-netinst.iso, burnt the CD and ran the install. First time through I had a power failure.
Second time through (a complete fresh start - new partition and everything) it went all the way through to completion and reboot.Clicked 'Continue' to reboot and the machine reset as it would normally and the Grub loader started okay, prompted for the "Debian amd64" standard boot image, selected that and the first 6 lines appeared normal, then the messages wizzed by so fast that only superman could read them. Then they stop - here is some of the content...
[3.816673] Kernel panic - not syncing: Attempted to killl init!
Call trace:
get_empty_filp
panic
[code].....
Running it again I get similar stack stuff but it's a different place: [3.541816], [3.427502] And sometimes if I wait for a minute or two it will continue on further but appear to crash again. Hardware details (everything is onboard - no added cards):
G41M-S3
Intel G41 + ICH7 chipsets
CPU: LGA 775 for Intel Core 2 Extreme
[code]......
Is the amd64 the wrong image? Should I try i386? Is it a blip and I should just rerun the entire install again?
View 14 Replies
View Related
Sep 8, 2010
I have just upgraded my Debian 4.0 box to Debian 5.0. The upgrade is ok and the version of debian is 5.0.6.
Webmin, despite all my efforts, is still displaying 4.0 and when I force it to 5.0 manually, it states: "Warning - Your system is actually running Debian Linux version 4.0."
View 2 Replies
View Related
Aug 15, 2011
I would like to understand the following:
I have a Debian installation CD that I can boot from. Now I copied that to an USB-stick using dd
dd if=/dev/sr0 of=/dev/sdc bs=1M
The CD-image should contain a boot-sector and everything else that is needed for booting, yet the USB stick does not boot.
What am I missing - why does the stick not boot?
PS: I am not interested in tips on how to create a bootable stick, I only want to understand why the above method does not work.
View 2 Replies
View Related
Apr 23, 2010
I have installed ubuntu in my D drive on my lenovo laptop but it not recognizing D drive only recognize C drive
View 1 Replies
View Related
Mar 20, 2010
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
View 8 Replies
View Related
Apr 5, 2011
I am trying to boot from an external hard drive, and have tried to use unetbootin like I used when crating a bootable usb drive but it does not see my external and will not create bootbale iso for me to run from my external hard drive.
View 2 Replies
View Related
Apr 16, 2011
My Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
View 9 Replies
View Related
Apr 30, 2011
I downloaded the 64bit net installer. I install just the standard, reboot and the machine hard locks on me. It appears to be locking up on Bluetooth.
View 2 Replies
View Related
Apr 18, 2011
I'm afraid I am going to expose my age here.
I remember being able to format a 3.5 inch floppy using MS DOS. The command was format a:/s
("a" was the drive letter and the "/s" was to add the bootable system file.)
HOW can I do that in LINUX, specially Debian 6.01 (my current version) I googled it and found a bunch of sites all offering answers.
NONE worked for me, I saw an option in a Slackware installation with a "make bootable USB stick option".
(It can be used as a rescue USB Stick also) We don't have that in Debian. How can I do that with my current Debian install?
I have several Debian USB installs on flash drives, They work great and give the user an opportunity to run and experience Debian with modifying their set-up. I am trying to set-up one that will NOT only boot and work as a live install, but will also allow me to install on the host machine right from the working USB Flash drive, if I choose to do so.
View 3 Replies
View Related
Aug 28, 2015
How can I make a bootable usb drive with GParted?
Is there a package that I can install to do this.
View 8 Replies
View Related
Dec 24, 2010
I just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
View 3 Replies
View Related
Nov 13, 2009
everytime i boot up I have to:
# vgscan
# mount -a
what is the command to get suse to automatically run vgscan at boot?
View 4 Replies
View Related
Aug 10, 2009
I would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:
1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.
2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.
Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.
View 1 Replies
View Related
Jun 20, 2011
I've installed squeeze and wheezy on an old Toshiba Satellite 210 CS laptop with 48MB RAM and a 20GB IDE harddrive.Grub2 won't boot at all and stops with a "error: cannot allocate real mode pages". The solution to that is to use the grub-legacy package.The boot then fails with "waiting for root device" and drops to an initramfs shell.
View 5 Replies
View Related
Dec 6, 2010
I am building a 10.04.1LTS server. I am putting the /root filesystem into a Software RAID1 partition. I want to keeo my /boot partition outside of RAID.Is there a way to have a boot partition on both sda and sdb so if one drive fails the second boot partition will work away - or should this be kept in with RAID also.
View 6 Replies
View Related
Mar 23, 2011
If I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
View 5 Replies
View Related
Dec 23, 2009
I would like to install F12 to a bootable USB device from a working Fedora partition other than the liveUSB-creator option. Is there a way to do that from a working Fedora machine without have to burn a DVD? Seems like there should be but I can't find a guide for it.
View 3 Replies
View Related
Jun 23, 2010
I am trying to install ubuntu 10.04 on my 1 tb my passport drive and am having loads of trouble. i am unsure how to format the frees space for the boot loader and main drive. Also what partitions are specific for ubuntu to function. This drive is formatted with masterboot partition and contains two other partitions for media and backup. The computer it will be mainly used on is a macbook pro with refit installed on it.
View 2 Replies
View Related
Jul 6, 2011
I've downloaded Ubuntu 11.04 and used the Windows tool to create a bootable USB drive on a Corsair 4Gb USB stick. On my desktop system I run Windows 7. However, after setting up my ASUSTeK Computer INC. M4A785TD-V EVO (AM3) board to boot exclusively from USB (removed the HDD as an option), my PC still boots directly to Windows 7.
View 6 Replies
View Related
Jun 3, 2011
I downloaded the Fedora-15-i386-DVD.iso and want to install Fedora 15 from it. I don't want to use the LiveCD version since it doesn't have all the packages. So I follow the tutorial given here under the section titled "How to Make a bootable USB Drive to Install Fedora instead of using a physical DVD ". Everything finishes off well. However. when I boot my computer using the USB, it says "USB doesn't have operating system. Safely remove and reboot".
Now, what to do? I also didn't get the line the tutorial saying, "You should now have a bootable USB stick which will run an 15 install. When you boot the stick, you may also add askmethod to the boot line and select a hard drive install and select the drive as /dev/sdb1 (or your USB device drive) and the path should be / " What am I supposed to do?
View 1 Replies
View Related
Jan 27, 2010
I am trying to install ubuntu netbook remix on acer aspire one netbook. I used the usb-creator.exe tool to make bootable usb drive. When I boot from the usb drive it comes up to the boot options screen. But when I try to either install or run ubuntu from disk it goes to a black screen and stops or goes to a page long error message saying "cannot mount drive" and a list of command options. I also am not sure if setup gives you the option to reformat the hard drive. Or if this has to be done prior to booting from ubuntu usb-disk.
View 3 Replies
View Related
Apr 4, 2010
I would like to install Windows XP on my netbook after some annoying issues. I haven't been able to find any solutions to this problem on Linux based systems after hours and hours and hours of surfing the Google. A lot of people say 'well use the usb startup disk creator!' Don't say that in here. It doesn't work.I already wasted about 3 hours on that. Any helpful advice would be greatly appreciated! (I have a 16GB thumb drive and Windows XP sp2)
View 2 Replies
View Related
Jun 25, 2010
I made a bootable USB drive using Universal USB Installer on Windows 7. When I try to boot from it, my computer never detects it, however it did detect the USB DVD drive. How can I check if the USB drive is actually bootable?
View 5 Replies
View Related
Aug 21, 2011
I have an netbook, a small Asus Eee PC model 1001 PX running Ubuntu 10.04 LTS. It don't have an optical drive so I wish to make an bootable installation disk with an USB flash drive. I followed the guide on Ubuntus homepage [URL] How to make an USB drive). But it did not work. I have an standard 4 GB USB flash drive which is plugged in. I have formatted it to FAT. And it is now empty.I went to System > Administration -> opened 'Startup Disk Creator'.
I pushed in all the options. But then the system asked for a password. No worries, I thought. It must be my own. But it was not. So my problem is that I am missing a password in order to authorized the installation of Ubuntu 11.04 on the USB drive. what are A. the proper search phrase for it? and B.
View 4 Replies
View Related
