I just installed Ubuntu 11.04 64-bit alongside Windows 7 home premium on ASUS A52J, corei5, ATI HD6370m.The problem is - I Can't Boot to it!!!! the machine boots straight away to win7. I don't understand it... the installation went extremely smooth and fast
View 3 RepliesI installed Ubuntu over my windows partition but kept the other NTFS partitions that I use for storage. For some reason GRUB shows up with the option to boot into XP (which isn't there). How do I get rid of the boot menu completely so my computer boots straight into Ubuntu?
View 2 Replies View RelatedHow do I configure boot so that the computer boots straight into windows xp, unless I press a key during boot?
View 5 Replies View RelatedI've searched and haven't found a solution for this one yet, but here goes. I took a 160GB hard drive and split it into 4 partitions, 1 for Windows XP, 1 for Ubuntu, 1 for swap and 1 for future use (possible Hackintosh installation??).I installed Windows XP first, downloaded all my updates, etc. Then, I installed Ubuntu 9.04 and selected the Ubuntu partition. After installing it, when I reboot the machine, it just boots straight into Windows XP, and it doesn't give me the option to choose which installation I want to use.I wanted GRUB; I know the installation is there because when I boot with the LiveCD, it shows up
View 3 Replies View RelatedJust installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies View RelatedI am fairly inexperienced with Linux. I'm good with windows and PCs in general. I've been wanting to setup a Linux environment for teaching myself some programming so I downloaded Ubuntu 11.04 to install on my main Windows desktop.
I have two internal HDDs and an external HDD. Each of the internals is 160GB and the external is 1TB. I have Windows on the drive in SATA0. I split the drive in SATA1 into 3 partitions. I Windows Disk Management to shrink the NTFS partition to 100GB for storage. I used gParted to create a 2GB swap partition the rest is a ext4 partition So sda1 is NTFS, sdb1 is swap, sdb2 is ext4, and sdb3 is NTFS, and sdc1 is NTFS
I mounted sdb2 as root and installed Ubuntu there. I chose the manual option for the installation as the install alongside Windows option only showed my external HDD (sdc). I wasn't sure where to place the boot loader so I tried to overwrite the Windows boot loader on sda but that failed with an error about no file system available or compatible. I figured Grub2 doesn't work on NTFS......
after fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
View 10 Replies View RelatedIm a newbie having the opposite issue that seems that everyone is having for what Ive seen, I have Grub on the MBR, showing the splash screen fine (the background image also), and allowing me to boot Windows 7, but I get a cursor blinking for the eternity when trying to boot Fedora 13.My hardware is:
Quote:
-ASUS M4A89GTD PRO (AMD 890 FX AM3 Chipset).
-Phenom 965 BE.
-4Gb RAM.
-3 x 250 Gb SATA Hard disks, first one alone for OS, and the other two in fake RAID1.
-1 x 80 Gb IDE hard drive containing trash.
-RADEON HD 4870 1Gb Graphic Card.
-RME HDSP 9632 Soundcard
[Code]...
i installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies View RelatedI've recently reinstalled all the os's on my computer, just now I'm going with ubuntu (general use) win xp (for flash, it doesnt play nice with 7 for some reason) and win 7 (for games). Everything is fine, but I can't get grub to boot me straight into either of the windows versions: Each option makes brings me to the windows bootloader, where I can choose between "Windows 7" and "Older version of windows". I want to go directly from grub to xp/7, without that extra menu. How do I get rid of it?
Using ubuntu 9.10. I snooped around and found a script to run that should give some helpful information:
[Code]...
I have a multi-drive system:
C: RAID 10 (WD 500 GB x4)
D: Data Drive (WD 1.5 TB)
E: Back-up ( Seagate 3 TB)
I shrunk the 3TB drive (E: ) to give me a free unallocated 60GB. Boot to F15 live DVD and did a custom install of the partition.Using the 60GB unallocated partition, use 500 MB /boot, 2GB /swap, and the remaining for /root and chose Fedora bootloader The installation completed successfully but after reboot it just goes straight to Windows 7-64. I have a AMD Phenom II X6 1100T 3.3Ghz with 8 GB DDR3 memory. RAID controller is a HighPoint RocketRAID 4320 PCI-Express and the other drives are connected to HighPoint RocketHybrid 1220 PCI-Express 2.0 SATA III controller. Only the DVD-ROM and Blue-Ray drives are plugged into the mobo's nVidai SATA controller.
I'm not sure if its the drive configuration is causing the problem or Grub was not written to the MBR but apparently it wont let me boot to F15. I'm also running 4 monitors with 2 x Radeon XFX HD-697A-CNDC HD 6970 but only one video card (2 monitors) are working. During boot to the live DVD I notice that it switches from each pair of monitors but not all 4 and only after the login screen that only my 2 monitors are working. I tried the monitor detect and it only see 2 monitors.
Ps. I just love F15 Gnome3. I'm moving from Ubuntu 11.04 Natty.
I'm new to Ubuntu, downloaded the version to run on the same PC as windows XP. Sytem starts straight to XP, never gives the option to start in Ubuntu.
View 3 Replies View RelatedI have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
So we install Windows 7 home premium. Then in goes the Ubuntu Disk. Ubuntu seems to think that the windows 7 partition is one big lump of unallocated space. Tried multiple re-installs of Windows 7, all concluding the same. A bit of googling told me that it has something to do with partition tables or something. I even tried to use Gdisk to delete Gpt from the windows disk, which - as I have absolutely no idea what any of it means, - resulted in me screwing up the entire Win7 partition hence win7 not being able to boot anymore.
i've seen on the internet include a lot of technical garble which I don't understand. I've been using Linux for a while, but as far as partitioning and dual booting is concerned, it's always gone smoothly for me up until now
i have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
I've installed Ubuntu 10.10 (64bit) next to my Windows 7, in SSD hard drive. I'm able to boot Ubuntu with no problem, but my problem is my Windows. When I try to enter windows 7, all I get is a black screen with one blink char, and from there it does nothing...
My PC:
cpu i5 760
4gb ram
mb gigabyte GA-P55A-UD3
gpu gainward nvidia gtx 460
I have the option of selecting between win7 and Ubuntu during start up, but when i select Ubuntu it goes to the first 2 lines of command and then restarts again. Windows 7 works fine. This is the second installation of ubuntu on this computer, the first attempt did the same thing (would not boot into ubuntu but win was fine) after i lost power. This time i shut the computer off for a full week while i was on vacation. I have switched between windows and ubuntu a couple of times and had no issue with this installation.
HP Pavilion
AMD AthalonII X4
8GB ram
1TB HD
AMD HD 4550
64-bit windows 7
wubi
Ubuntu 10.04LTS 64-bit
All stock and at cool temperatures.
I have just installed Karmic on a dual boot system with XP and Ubuntu on separate drives.This set up worked ok with Jaunty. When the boot menu comes up, selecting Linux results in a successful boot. Selecting "Windows XP home edition (on /dev/sda1)" results in the screen changing to blank with the word "Grub" in the top left corner and no further progress.No error codes associated with this message. I've tried suggestions I've seen in various threads but have had no success.
Below is the contents of menu.lst:
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]...
Is there a way to make Ubuntu boot straight to the desktop rather than asking for a login when it first boots up?
View 2 Replies View Relatedgot myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies View RelatedI have installed the ubuntu-desktop package on top of ubuntu server 9.1 but now I would like to remove it and boot straight into terminal. I would just like to have a basic server that goes straight into terminal.
View 4 Replies View RelatedI'm using a low spec machine and want to run it 'headless', so I don't need a GUI and want to conserve resources.How do I boot straight into a terminal session, rather than a GUI?
View 1 Replies View RelatedI was gone for like an hour and when i came back it was doing this. The only way I could get on the internet was by running firefox from terminal but that is all that shows up, and none of my history, bookmarks, etc are on it. As soon as i log in, it goes to terminal in a box in the corner of the screen. What can i do to get my computer back?
View 3 Replies View RelatedI bought a new computer (laptop HP DV6-1375dx) and I want to set a dual boot with win7, like I did with my desktop (clean install) However, my question is, with the new laptop all I have is the rescue disks vs. having the single OEM version. IS that a problem? for the desktop I followed lifehackers article "Dual boot win7 and ubuntu in perfect harmony." no problems at all.
what I am afraid of is formatting the new hard drive and the recovery partition and not being able to use the disks for some reason....am I over-reacting?
I had 9.10 installed for a long time as a dual boot with win7 on this computer. I mostly use win7, but today i went into ubuntu and it said there was a new version available so i installed it.the error occured with the grub installation. it said if i was unsure of where to install it, i should install it on all drives, so I did. ever since then i've been looking online using this liveCD to find some solution to fix the problem, but I cant.here is what i've tried:
1. i downloaded a windows 7 repair disc and used the bootrec.exe /fixboot and /fixmbr commands, but this ends up with a blank screen with a cursor blinking.
2. I've tried re-installing grub, but this ends with the boot freezing at a screen with something like: "sh:grub>" and i can't do anything.
3. I've tried testdisk but this also didn't work for me.
i've been trying to fix this problem for 7 hours now but nothing. so i'm hoping maybe someone here would help my specific situation out.the current status of my computer: i have uninstalled grub in sda1 and sda5 (my ubuntu should be in sda5) and i used the windows7 repair CD to /fixboot and /fixmbr, so now when i boot, it freezes at a blank screen with a blinking cursor. anyone can help me, please?
I had win 7 installed, decided to install ubuntu on this desktop computer. I had a windows partition, and a few other partitions, one with a wubi install of windows that I never used, so I decided to delete it, while installing ubuntu 10.10. I had free unallocated space for installing ubuntu, which was contiguous to the partition of the wubi install of ubuntu, so I decided to merge them, I did all this in gparted while installing ubuntu 10.10, 2gb swap, then 15gb root and all that remained to home.
Everything worked out fine (of course I never touched the win7 partition). After reboot grub doesn't show win 7, so I thought I'll just add it to grub, followed a few tutorials on this forum, but nothing worked. Then I remembered that the partition which I deleted to merge with the ubuntu partition, was an Active partition, and soon found out that my win7 partition was not active! (this is probably because I installed win 7 while I had still win vista, so that active partition was where vista was).
So now a ~100mb apparently unallocated partition was the active partition (win 7 hidden boot partition?), and trying the Startup repair of win 7 cd doesn't work, tried bootrec /fixboot, successfully, but bootrec /rebuildbcd can't find any Windows installation, even after setting the win7 partition as active with DiskPart. This is almost entirely a windows problem, but I just wanted to have Ubuntu working alongside Windows (I use a lot adobe's sw, which runs sadly only on windows, otherwise I would use only ubuntu).
I want to create a dual boot between Windows 7 and Ubuntu. I have done the following:
1. I installed Win7 on my second SATA drive WD740AD.
2. Then I installed Ubuntu on my first SATA drive WD5000A.
When I boot my machine, the machine will always boot linux. I can't even choose Windows 7. My knowledge of Linux is very limited. I have looked for information on the web and found some information about grub but I cant make it work. Mostly all the information is about installing Win7 and Linux on 1 HDD.
I installed via wubi on windows 7 on a separate clean drive formatted with win7.
Installation went ok and system boots with a choice to go with either win7 or ubuntu.
After selecting ubuntu I get a screen with msg saying error with wubildr.mbr and asks me to pop in win7 disk to fix it. Why its asking for win7 disk to fix win 7? I see both wubi files in C: (root). Systems booting up ok with win7.
I've tried this a couple of times and can't load Ubuntu.Here's the scenerio, I have 3 partitions.
/dev/sda1 = ntfs (Win7)
/dev/sda2 = ext4 with the / mount point
/dev/sda3 = swap space
I've some tutorials where I need a /boot partition as well and others where I just need the root partition. At the bottom, there is a drop down box for you to select the device for boot loader installation. Those options include /dev/sda, /dev/sda1 (Win7) and /dev/sda2.
I need to do to get the dual boot working? My first thought is to install the boot loader onto /dev/sda but I'm unsure. It keeps booting Win7 and can't get the option to load Ubuntu.
I used to have a win7 hp laptop. I decided to use ubuntu9.10. i installed it to my second drive (d after shrinking of c: drive to 100 gb. After installation of ubuntu, i try to boot win7 from grub screen, it goes to blue screen and restarting, not opening. But when i choose ubuntu, it is working properly. When i try to repair it, the win7 cd does not see any drive, only its x drive (where it boots). how can i start my win7 again. I am working on this 2 days.
============================ Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive in partition #4 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb
[Code]....