Software :: Can't Get VirtualBox To Work?
May 30, 2011
After upgrading to Ubuntu 11.04, I can't get VirtualBox to work. The program itself starts find, and I am able to create an configure an virtual machine. But when I try to launch the new virtual machine, I get this message
Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT)
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {515e8e8d-f932-4d8e-9f32-79a52aead882}
I have tried purging the virtualbox packages from the Ubuntu repository and install the once that can be downloaded from oracles website. I have also tried doing a "/etc/init.d/vboxdrv setup" and I have tried running vbox as root instead of my regular user. Nothing works.
Does anyone have an idea to how this problem can be fixed. Have been using virtualbox for years without problems for browser testing purposes. Really need to get this working again.
View 6 Replies
ADVERTISEMENT
Jul 12, 2011
I have the latest version of Ubuntu Ultimate Edition... and the newest Virtualbox, because I need my Zune software..well I connect my Zune..and it shows up on the virtualbox, but it won't install the driver? What is this about?
View 8 Replies
View Related
Oct 15, 2009
I've got a problem with getting my VPN connection from my virtual machine working (a XP64 running in VirtualBox). I really need to get it working so that I can nuke my windows partition, and because I would like run linux programs while using my XP VPN connection (as I need to run some XP programs at school). I've found this manual on how to do it on Ubuntu, but I am doubt about how to translate it to Fedora (and I really prefer Fedora). [URL]
View 6 Replies
View Related
Mar 2, 2010
When I install the latest F12 kernel, my F12 installation freezes immediately on boot. The previous kernel booted fine. It's a little strange, because if I edit the grub.conf to use the old kernel, the freeze still occurs.Is anyone getting Kernel 2.6.31.12-174.2.22 to work in virtualbox? (both yes and no answers would be useful here)Does anyone have any idea of the cause (and especially, why updating the kernel would cause the _old_ kernel to freeze as well)
View 14 Replies
View Related
Apr 24, 2011
I am doing a project for school to set up a Linux network in virtual-box. I have very little Linux experience and am struggling to make anything work. I am trying to get webmin to work but it won't connect. I followed the install instructions perfectly and everything seemed to work fine. I've opened any ports that it said to open. but I still can't get it to connect. When I enter https://myservername:10000/ it just try to load until it times out. When I try to ping that address it says not valid network address. I'm at a loss and this is due in a few days.
View 3 Replies
View Related
Dec 9, 2009
Host is x64 openSUSE 11.2
guest is winxp pro
VirtualBox ver 3.0.12
The install and setup of VirtualBox is good and working.
I'm having a perplexing issue with usb devices. I have three usb devices connected to my system - apc battery, sd carder, and a Logitech joystick. All devices work on the host. I can connect the apc and the card reader to the guest and they work perfectly. But not the Logitech joystick. I get this error, same as I've seen in some other threads:
Failed to attach the USB device Logitech Force 3D Pro [0600] to the virtual machine winxp1. Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)
under "details" is this:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {0a51994b-cbc6-4686-94eb-d4e4023280e2}
When I installed I modified my fstb:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part1 / ext4 noatime,acl,user_xattr 1 1
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part2 /home
[Code]....
View 1 Replies
View Related
Feb 3, 2011
I'm running Ubuntu in a virtualbox VM on windows, and none of the key-bindings that I define for compiz plugins (such as Grid and Put) work. I've tried letters and numbers by themselves, as well as combined with ALT, CTRL, and Super, but all fail.
View 1 Replies
View Related
May 21, 2010
I cannot make Virtualbox work in Ubuntu 10.04 (upgraded from Ubuntu 8.04). I tried both to install Virtualbox OSE from Package Manager and Virtualbox 3.2 downloaded from the Virtualbox site (32 bits version, as my OS). Installation is OK, but when I try to run it, I get an error message:
Error in home. virtualbox.xml (line3) cannot handle settings version 1.2-linux. Code: NS_ERROR_FAILURE (080004005). Virtualbox would be good because it allows running some Windows applications or games. Wine seems useless, only a couple of applications run in Wine and practically no games. It keeps warning me about DirectX etc. I can't understand why Wine exists at all.
View 2 Replies
View Related
Sep 2, 2010
i was trying to install mac snow leo in virtualbox but when i searched for wut i need to have i found this link when i entered the code it returned nothing so apparently i dont have it,im asking if theres a way i could get it or just get mac work in virtualbox?
View 1 Replies
View Related
Sep 19, 2009
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
View 3 Replies
View Related
Feb 4, 2010
I am trying to use VirtualBox which worked just a week ago (I haven't changed anything with it) but now it fails. When I try to start it (from the command line) with /usr/bin/VirtualBox, as a regular user, it fails.
View 6 Replies
View Related
Feb 21, 2010
On my HP TX2500 laptop, dual-booting Vista and 9.04, Ubuntu installation found the WLAN and it works fine.I installed VirtualBox with Vista as the host and 9.04 as the guest. Wired Ethernet works fine but it didn't seem to find my WLAN. What more do I need to do?
View 1 Replies
View Related
Nov 8, 2010
VirtualBox: So, with VB, testing out stuff without messing up your actual operating system (in my case Linux). (I had more to say but can't remember atm) Remastersys: Well, I think I MIGHT have a reason as to why Remastersys doesn't work for me. I think I might have downloaded the wrong repository thing. I downloaded:
[Code]...
I ask because of the word Lucid is in the sentence. What do you all think, should I un-install remastersys and downloaded the one with the word Lucid in it and see if that makes a difference as to whether the program makes a proper .iso file or not?
View 2 Replies
View Related
Jul 27, 2011
I'm trying to get Gnome 3 to work on 11.04 under virtualbox (3D acceleration enabled) but I get the message that "it can't load session gnome" when I try to log in. The same message appears when I try to do this on an EC2 instance. Please let me know if someone got it to work on EC2.
View 1 Replies
View Related
Nov 5, 2010
I'm running VirtualBox 3.2.6 on a Win7 computer. In VB I have several clients:
3 OpenSuse, 11.2 & 11.3, 2 w Gnome one text-only. One Smoothwall Two Debian Lenny, one w Kde one w Lxde Only in one Debian, the one w Kde, the numerical keypad doesn't work! I've tried booting without X but no difference.
View 3 Replies
View Related
Jun 9, 2010
I have ubuntu 9.10 and want to give fedora a go through Live usb but how? I my cd dvd drive does not work and my virtualbox is not taking my usb pendrive.
View 2 Replies
View Related
Oct 31, 2010
I am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
View 13 Replies
View Related
Apr 27, 2010
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
View 6 Replies
View Related
Mar 7, 2011
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
View 1 Replies
View Related
Mar 23, 2011
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
View 5 Replies
View Related
Aug 10, 2011
I have been going through forums and following "how to's" and walkthroughs on how to use VirtualBox to run my Win 7 VM. I have a pre-created VHD that I am importing to my OpenSuse 11.4 machine. One vhd was created in Hyper-V and has hardware and cpu cross compatibility turned on. Everything works perfect when booting it up on my Hyper-V server. When I move it over to my OpenSuse VirtualBox the VM will not boot. It gets to the "Starting Windows" screen and then throws an error screen that the VM encountered errors while booting. It then runs the Window's startup recovery tool and even tried to do a system restore. Nothing works and it never progresses beyond that point. Figuring there was something with the vhd file. I used Acronis Advanced Backup and Recovery to create a non hardware dependent backup that was automatically converted to a vhd. I know the process works as that is how I have converted the bulk of the servers at work into VM's. However, when I move the vhd file to the OpenSuse VirtualBox... it does the same thing.
So I am trying to figure out what might be going on here. Is VirtualBox not able to virtualize Win 7? If not then what VM software should I use? VMWare, Xen, ???
View 7 Replies
View Related
May 10, 2011
I'm using VirtualBox 4 on OpenSuse 11.3.
I've 6 vm with different OS.
My company uses a net in 10.x.x.x. But I can't use IP of that range (only one for the host). I use IP for my vm in the range 192.168.x.x.
I need my vm to communicate each other, to the host and outside. From outside (10.x.x.x), don't need to access 192.x.x.x.
How do I have to configure Virtualbox?
- Tried with host-only. VM can see each other, but not the outside.
- Tried with NAT. Then VM can't see each other.
- Tried with bridge. Then can't see outside.
View 3 Replies
View Related
Nov 26, 2010
I first had Virtualbox installed in Lenny, before I dist-upgraded to Squeeze some time ago. After the upgrade, however, I can no longer boot iso images from the hard drive in Virtualbox. For instance, I tried booting a Debian Lenny netinstall iso and the Squeeze beta iso, and had the same problem with both of them. They both hung with a black screen and a "_" in the top left corner.
The old virtual hard drives boot without a problem. I only have a problem with booting iso files from the psysical hard drive.
View 3 Replies
View Related
Oct 28, 2009
This is my humble tutorial on how to get VirtualBox up and running on Fedora 12. It's located on my web blog here: How To: Install VirtualBox 3 on Fedora 12 [Tutorial]
View 7 Replies
View Related
Dec 29, 2009
I've been trying to get a converted virtual disk running in VirtualBox for the past several days. The VM begins to boot in a window but never gets past a black field. Until today the title bar would always change from "running" to "suspended" and just hang there. Now it just keeps saying "running" but never boots so I'm thinking the virtual disk may have become corrupted from repeated shutdowns without ever booting.
The User Manual at VirtualBox.org is of little help since it appears to assume you're using their packages. They also make references to utilities or scripts like "/etc/init.d/vboxdrv" that aren't even in the latest version so I think it hasn't been updated in a while.
There doesn't appear to be many hints in the Vbox.log either - couldn't find a way to get more verbose logging. Until now I'd get to this point and it wouldn't change until I shut it down:
I'm guessing the reason for the suspension was the message immediately above the notice. Now I just see the "unmapped device" message and the guest window says "running" indefinitely. I've attached copies of logs from a couple of sessions, one where it suspends itself (a vnc session) and another where it just stays running (a console session). Some googling suggested that the "unmapped device" message implies it can't find the boot drive or the boot sector on the virtual disk.
The host is normally accessed through a VNC session to a virtual console but VBox log messages indicate that it cannot determine the keyboard type when accessed this way so I now have to physically sit at the native console. If anyone knows of a way to overcome this limitation I'm all ears.
People don't usually respond to my threads so I'm basically talking to myself outloud here. I'll read it again later an maybe come up with something else to try. For now I'm going to remove all the VBox packages and re-install them, starting from scratch. If that doesn't get it working I'll delete the converted virtual disk and re-convert it from the original. If I still can't get VBox working after that I'll be forced to install VMware Server (resource hog). I'm getting desperate now...
[Background] Until a few weeks ago we were happily using qemu-kvm but encountered a bug when using the "-smb" argument after updating the host from Fedora 9 to 12. (re: F12: qemu-kvm with -smb hangs then dies) In an attempt to get our virtualized MS Windows Server 2003 back up and running I installed VirtualBox-OSE-3.0.10-1.fc12.x86_64 and friends over the Christmas break. I converted the qemu qcow2 image to raw then to vdi format using qemu-img and VBoxManage tools. There were no errors during the install of VirtualBox. In the beginning Bug Buddy notified of a crash whenever we started up VBox but after some digging and experimenting I believe the crashes were caused by running VBox in a VNC session instead of at the console. I haven't seen a crash when starting it in a native console session. Unfortunately, this means I can do very little remotely.
[Host Hardware]
[Host Software]
Code:
View 9 Replies
View Related
Jul 2, 2010
What is the best way to do this..and should it work well with F13? Can it be done with yum? I read here that you need to install Qt first but am not clear if that is really a requirement or if that can be done with yum as well:[URL]Are there any other installation requirements necessary? I saw posts mentioning specific kernel versions and deleting old kernels.... looking for the safest and simplest way to set this up
View 13 Replies
View Related
Jul 27, 2010
I am running Fedora 13, I have installed virtual box that is running Windows 7. I am attempting to run a few star wars video games. Everything works in the virtual machine however it doesn't see any 3D hardware therefore not letting me run these games. I had W7 installed on the computer before and I love fedora and I don't want to dual boot. Is there anyway that anyone knows how to get this working or is there another program that can run a virtual machine for me? Quick update, I installed somethings using the Device menu and Install Guest Additions. That go some mouse and a better video resolution to work however, when using dxdiag in Windows 7, it says that the 3D Acceleration is unavailable. In the settings I have 3D accelration enabled of course.
View 3 Replies
View Related
Jan 19, 2011
I am running Fedora 13 and have VirtualBox 3.2 installed. I see in yum list that VirtualBox-4.0.i686 is available but apparently I do not get updated to this version running yum update. How can I update to VirtualBox-4.0.i686 ? I uninstalled 3.2 and simply installed 4.02 and everything worked fine. Previous virtual machines are compatible and still work as before.
View 1 Replies
View Related
Apr 8, 2011
In the about last 2 weeks is available an update for VirtualBox OSE, but it fail every time.The final error is "transaction empty" on the gui of the updater.Trying to solve I put the commands suggested by yum (--skip-broken and rpm -Va --nofiles --nodigest) with no luck.
View 4 Replies
View Related
May 13, 2011
I'm on Fedora 14 and tried to install virtualbox using yum install virtualbox It seemed to install but wouldn't run and I got messages saying there was an issue with it not recognising the kernel. I used the Add/Remove software function and added the right kernel but on reboot it didn't complete the boot up process. I get as far as the loading progress bar being fully loaded but don't get to the login screen I've tried loading earlier kernels to no avail - the same issue.
I can access the install via my live CD but I'm not that experienced a user and how to proceed. My guess is I need to remove all the Virtualbox components but I don't know how from where I am.
View 4 Replies
View Related
