I reinstalled XP to do a dualboot with 10.10 yesterday. All was fine. Today I went through and installed everything windows needed, and everything seemed fine. Then I upgraded the BIOS on my motherboard, and suddenly everything isn't fine. I can boot to Ubuntu just fine. But when I select Windows from the GRUB menu, it just sits there with a cursor on the screen now.
View 1 Replies
i am using an USB keyboard and mouse. This is awkward because I cannot select which OS to boot from, etc.Also, cannot access BIOS to potentially turn on the legacy USB function. We do not have a ps/2 keyboard, and believe me, I looked. I acquired a usb to ps/2 adaptor: Still no joy. Also, the keyboard doesn't work within the virtual Ubuntu, while it did when connected without the adaptor. Getting my hands on a ps/2 keyboard is not an option. To get into Ubuntu, I had to, within Windows, tell the computer that the Live CD was a bootable drive, so that it would be the first option over Windows, and therefore the automatic selection when I didn't (couldn't) make one.
[Code]...
This leads me into the Ubuntu 9.10 install, where I am told Ubuntu is already on the computer (half of the hard drive, with Windows XP on the 2nd half), and I can either install 9.10 beside it, or replace it. If I choose to replace it, 9.10 takes over the entire 40 GB. Part of the problem is that the partition that Ubuntu is apparently on is /dev/sda1, and Windows XP is /dev/sda2, but within the Palimpsest Disk Utility:
20 GB File System
NTFS File System
Partition 1 (HPFS/NTFS (0x07))
/dev/sda1
20 GB File Unrecognized
Unrecognized
Partition 2 (Linux (0x83))
/dev/sda2
So I'm worried that if I install 9.10 in /dev/sda1 like it wants me to, I'll be losing XP.
Was running dual boot 10.10 and winxp on a MSI P4M900 motherboard. Have two HDs - one with OSs and some storage and the other purely backup for storage and Ubuntu home. Motherboard died and going to be replaced by Gigabyte G31 board. I will be using the same video, audio PCI cards and memory from old board. Should I look to a clean install of 10.10 and then bring back to life from my backup files (bookmarks, email etc) or could I plug in hard drives and boot normally? There is conflicting advice when I google - some say its OK just to boot, the kernel will sort out the new mboard drivers, others say you need a clean install.
View 2 Replies View RelatedI installed Ubuntu 10.04 as an upgrade from 9.10 on a dual-boot (2 separate disks) machine and it decimated my Win bootloader. I did fix and here's my solution:
1/ Run Win XP installation disk
2/ Type R for Repair
3/ Choose XP installation
4/ Run FIXMBR and FIXBOOT
Note when I ran FIXMBR only, it did not fix my problem. But running both FIXMBR and FIXBOOT did solve the problem. I offer for information only, as your situation may require a different solution.
What is the procedure to stop dual boot up in your BIOS on Linux?
View 5 Replies View RelatedI have the 32 bit lucid dual booted with win 7, and I wanted to upgrade to the 64 bit lucid. I have the .iso on a jump drive ready to go, BIOS is set to boot from it, now it gets funny. Unless I misunderstand what grub does shouldn't my jump drive show up in the grub menu so that I can select it to boot from? My only options showing are 32 bit lucid and wins 7.
View 4 Replies View RelatedCurrent set-up:
Athlon 64 2800
2 GB RAM
340 GB on two HDD
Ubuntu 10.04 LTS
Win XP Pro SP3
After getting the Silver Ghost all set up and purring like a kitten for my daughter, she now informs me she'd rather have Win7 HP instead of Win XP Pro SP3. Ubuntu and Win XP Pro are on separate HDD. Can I do a "clean install" of Win 7 HP on the Windows drive without screwing up GRUB? Or will I need to do the dance described at [URL]. I've had to modify Ubuntu because of conflicts between 10.04 and the Ralink 2780 (?) wireless-n drivers.
im on an old (8 years?) hp that doesnt support booting from usb. will a bios upgrade change that?
View 1 Replies View RelatedMy hard drive apparently has errors, according to my Windows 7 installation. ._. So I am going to restore to factory settings. First question - Will factory setting make me lose my Anytime Upgrade? If so, is the key that was in the anytime upgrade box re-useable? Second Question - Under the chance that I have data loss once setting up my Ubuntu-Windows 7 Dual boot system, will I lose my anytime upgrade, and is it re-usable?
View 5 Replies View RelatedI haven't done this in a long time, so I probably just need a quick refresher on a few things. I had to revert to Vista as my primary OS for more than a year to do CAD work, but now I finally have the freedom to move back to Ubuntu. I have my Win7 upgrade that I still haven't done (yes, I know I'm late to the party) and I want to update my Ubuntu 9.04 install to 10.10.
If I remember how to do this correctly, I should upgrade Vista to Win7 first, and then install Ubuntu second. I have two separate hard drives, so each OS will go on a separate one. The only issue I had in the past is that the drive with Ubuntu on it must be set as the primary boot device, otherwise GRUB wouldn't load. Is this all correct? I've been out of the Ubuntu loop for quite a while, are there any caveats to this process that I should be aware of?
I have a pretty good grasp on general computer works and I have read alot about the dual boot system and can do it with multiple variations of linux. My problem lies within my laptop, that I want to do a dual boot on (which is my only one with wireless). It is currently running Vista Home Premium-x86 and I would like the upgrade to Windows 7 Proffessional-x64. I have access to it but I have to keep Vista as is in order to keep Windows 7 as an upgrade which will have to be a custom install. This HD is dedicated to Vista and the backup partition as it is already.
I've read just about everywhere that you first have to do Ubuntu install and partition and then Windows, which makes sence, and then change the GRUB. However, I'm unsure about this case.
What would be the best way of going about making the partitioning scheme? I've already backed up everything possible so loosing that info is not the problem. Vista is the problem. My HD is a toshiba 320gbs- 2.5" form factor. My plan was to make 3 partitions. Windows, Ubuntu, and then the back up partion for Windows. I wanted to allocate Windows 150gb, Ubuntu 150gb, and then the other 20gb as back up for Windows.
I have a dual boot laptop (Acer Timeline 1830) working fine. I'm running Ubuntu 10.10 and Windows 7 Home Premium Edition. I need to upgrade Windows 7 Home Premium to Windows 7 Professional (Thats Winblows for ya.). My questions: Has anybody here done this upgrade, did it go seamlessly (Didn't destroy your master boot record, etc) and is there anything anything else i should know before doing this upgrade?
View 7 Replies View RelatedI am planning to upgrade my system's motherboard tonight. I am going from a Via chipset and ATI graphics to Intel G41 chipset with onboard graphics. What do I need to do to Ubuntu in order to handle the upgrade? I'm running an updated version of 9.10.
View 9 Replies View RelatedI had a machine that dual-booted Windows 7 and Ubuntu 9.10. This past weekend I thought I'd upgrade to 10.04. I obviously selected the utterly wrong set of selections when prompted during installation to pick partitions for GRUB2 to manage. I am sorry I can't say what I picked, but I can tell you the results:
* Ubuntu 10.04 boots fine
* Windows 7 just blinks with a flashing cursor in the upper left
* I do have my Win 7 install disc and used the "repair" option and the command line commands, but the repair disc does NOT see any valid Windows partitions... no C:, nothing. I can't run the various repair options I've seen online because there's nothing to run it on.
* I can see the Windows partition when booted under Ubuntu... all the data is still apparently there.
* I've seen various threads about restarting with the LiveCD and re-running GRUB2 but am not sure I've seen a definitive page on how to re-run GRUB2 and what to select once I've done so.
I would be happy to get both Win 7 and Ubuntu bootable, but barring that, I would like to get Win 7 back with everything intact. If the easiest path forward is to reformat and reinstall Win 7, that's less fine but doable -- I've backed up what I can via Ubuntu to an external drive.
I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
Code:
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic (recovery mode)
Ubuntu 10.04 LTS, memtest86+
Other operating systems:
Windows Vista/Longhorn (loader)
If I select the top one, I get:
Code:
Starting up ...
with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
I'm thinking of buying a new motherboard for my desktop. I've chosen a model and I've read some reviews on it. A couple of the reviews talk about BIOS updating/flashing and stuff like that. As a moderate hardware guy (I've built computers, but only know the basics of hardware and how they work together) running Linux, should I worry about this. I've never updated/flashed my current mobo's BIOS
So are all these reviews specific to Windows users? I've never had much driver issues in Linux (other than ATI graphics cards), nor have I had to update BIOS.
I could change and manipulate all the bios features before I put an administrator password on the bios. Now that I have put a password on the bios, even when I log-in with the correct password 90% of the motherboard settings are locked and un-changeable.
View 5 Replies View RelatedCan anyone tell me the command to find Dell system motherboard BIOS for a linux machine ?
i tried find dmidecode but that does not fetch me appropriate output.
Still in 8.04 hardy heron, ordinary upgrade via automatic upgrade does not work, some essential pieces missing, but also my bios does not support usb cd and my "original" cd drive is broken. So........ I have burnt a cd Ubuntu 10.04 Lucid Lynx desktop version
32 bit (intel).
1) I have broken cd drive and old bios, i have usb cd drive instead which is not supported by bios when boot from cd.
2) I have still Ubuntu 8.04 Hardy Heron but if i upgrade to 10.04 from there via automatic upgrade, this does not work, some patches missing, whatever, but upgrade this way does not work and in the end the system is set back to 8.04 again...
3) I have burnt a cd with entire Ubuntu 10.04 Lucid Lynx which i had downloaded from the web at ubuntu com; within my 8.04 i want to install all of it, so i want to install 10.04 this way, so a fresh installation via my usb cd (this is also the way i had burnt this cd image; the cd shows all the files so it is the right way burnt), so just not via bios boot, or how to explain this best.
[code]....
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
View 4 Replies View RelatedI was wondering to restore on old laptop to working order. This laptop is an old early 2000's Sony Viao, which I found in the trash. Still powers on, and can boot the latest Ubuntu LiveCD. The issue is that it did not have a harddrive in it, and I really do not want to shell out money for a drive for a laptop this old, but would still like to bring it back into service as a thin client or general purpose web/email terminal. The BIOS does NOT have a USB boot option, and every tutorial I have seen requires that in order to boot Ubuntu from a USB stick (which is what I do have). What I am wondering is, is there any way to just keep the LiveCD in the drive and use that to boot the kernel, etc, and then have it look for the rest of the filesystem on the USB stick?
View 6 Replies View RelatedI'm trying to install ubuntu Linux on a Pentium 3 computer which does not support booting to the CD-ROM drives. What are my options on other ways to install? Could I either use a 3.5inch floppy disk to get it started or install on another computer and just switch the disk back over right before configuring all the hardware?
View 6 Replies View RelatedHow to get Dell system motherboard BIOS for a linux machine ?
View 3 Replies View RelatedI donwload the Ubuntu 10.04 *32bits ISO image, and i burned each image with diferent speeds. Then, i tried to install, appears the Language Selection screen, all good. then, the Localization screen, I select Colombia (I'm from Colombia), clic on forward and the mouse shows the "loading animation", but the PC doesn't do anything (I let it for 30 minutes). I tried with the 2 CD, but ever the same result. And in some times when I try to out and reboot appears an error, so I have to reboot manually (with a button ).
And other problem, is that my BIOS doesn't let me boot form USB, so I can't install form USB. The last opportunity, and tried to install it, upgrading from Ubuntu 9.10, but in the instalation it gave me some errors, and in the 80% (or something like that), appears a window asking me to install GRUB AND EVERYTHING FREEZES, so I had to rebbot manually, and reinstall Ubuntu 9.10.
i just downloaded Ubuntu10.10,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 8 Replies View RelatedI'm doing a fresh install of xubuntu 11.04 x86 32bit via the Alternative CD. My computer has two 2TB drives and I want to mirror the partitions for redundancy For the Linux partitions (ie root and swap) I'll be creating raid partitions on each drive and using software RAID 1 to create md partitions of type ext4 and swap.
For the GPT's bios boot partition, am I also meant to use software raid ? Ie create a raid partition on each drive and use software RAID 1 to create a md partition of type bios boot ? Or am I meant to not use raid partitions and just create a bios boot partition directly on each drive ? In this case, will xubuntu's install process and grub tools ensure that both partitions contain the relevant grub files or do I have to explicetly do somthing to ensure that ?
I have a system dual booting Ubuntu with XP.Up to upgrade to Lucid, grub worked fine, but now any attempt to use the grub menu to move to XP gives only another grub menu.I need to use XP once in a while. How do I resolve this
View 9 Replies View RelatedI had been running a dual boot of both ubuntu and windows 7. I recently upgraded to ubuntu 11.04. After doing so i no longer have the option to select to load windows from the grub loader. Instead of the options presenting themselves my screen remains black before loading ubuntu.
View 9 Replies View RelatedI just upgraded to the new Ubuntu distribution. My GRUB looks the same and has an entry for WIndows7, however when I chose this option I just get a blank screen and it doesn't load Windows.
jcampos@linux:~$ sudo fdisk -l
[sudo] password for jcampos:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
