Ubuntu Installation :: Upgrade From Karmic To Lucid Disables PostgreSQL-8.3?
May 19, 2010
I just upgraded a Ubuntu Desktop 64bit system from Karmic (9.10) to Lucid (10.04). There were several PostgreSQL 8.3 clusters running on that machine. After the upgrade, postgresql was not able to run anymore.
The package postgresql-8.3 was marked "rc" in dpkg -l I was not able to re-install PostgreSQL 8.3 because of a mismatched dependency. There was no warning. I guess i should have read the release notes, which i didn't. There should have been a warning before it was too late to turn back and upgrade postgresql to 8.4 first. I don't see how this is supposed to work, ever.
I'd like to know if this would be considered a bug, if it is known already and how to correctly file this bug correctly if appropriate (ubuntu-bug ?)
When I recently upgraded my desktop to Karmic, my postgresql 8.3 no longer starts. I've got data in 8.3 that I need, but now no way to access it. Karmic upgrades to Postgresql 8.4, but leaves 8.3. Problem is, I can't seem to start 8.3 no matter what I do (there's no error message. I even tried removing 8.4 entirely--without effect. When I try to start 8.3 (using command line or boot-up manager), there is no error message, either in system logs or in the postgresql log file. There is also no indication of an active postmaster in ps aux or anything listening to postgresql ports in nmap (for that matter, seems there's nothing listening even with 8.4 activated).
I could try to 'upgrade' my data cluster to 8.4. Never tried that before and am concerned about possibly losing data. Also, I made a load of tuning adjustments to 8.3 that I'd have to replicate with 8.4. I'd rather stay with 8.3, if possible. There are also two pieces of software, postgresql-common and postgresql-client-common, that presumably allow one to run two versions of postgresql simultaneously. Maybe this stuff is even the source of my start up problems. No idea where to learn how to use this software, and, esp., whether this would solve the 8.3 start problem.
I'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
I can't upgrade from Karmic to Lucid,If I try to use the update manager I get a message that says "Can't download release notes. Check your Internet connection". I've tried changing the repository and I get the same message, but I can log in to the Internet, and download and install any program from the repository. I also get regular updates for Karmic so the repository is fine.I tried the command line
Code:
~$ sudo apt-get dist-upgrade Leyendo lista de paquetes... Hecho Creando �rbol de dependencias
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code: Boot Info Script 0.55 dated February 15th, 2010 Boot Info Summary: => Lilo is installed in the MBR of /dev/sda sda1: File system: ext3
using update manager, i allowed my karmic desktop at work to begin the upgrade process to lucid on friday afternoon... i ran out of time, and headed home for the weekend. somewhere along the process, the screen locked. after arriving back at work this morning, i cannot unlock the screen, or even switch users. other threads in this forum seem to indicate that i should've aborted the upgrade, but... i didn't know enough to anticipate problems, and i guess i assumed that given the lengthy estimate to complete the upgrade, i could just pickup the process again on monday.
in any case, cycling the power didn't help, so i downloaded the iso, and have booted to the 10.04 'trial'. i was hoping somebody could help guide me through resetting a password on the on-disk os from the live cd... i'm ok with reinstalling if i can preserve my account's configs & prefs.
I have an HP Mini 210 and I recently performed an Upgrade from 9.10 to 10.04 and noticed that the netbook is much more noisy now (and can get very warm). I am not sure wether is the fan or the hard drive spinning. I did a "top" but no process was high consuming. I also thought that maybe compiz could be responsable for it, so I disabled all the visual effects, but still no change.
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
I upgraded to Lucid from Karmic.Im now using gnome but would like to get back to KDE. Sadly it seems that even with kdm and plasma-desktop packages installed, I run into a problem at login.If I choose from the downwards facing arrow on the botttom left of the screen, and pick "KDE".Then when I log in, it shows the first icon (a hard disk), goes black and plunks me back on the login screen.This is a Karmic>Lucid upgrade process and I wonder if something got borked in the process.
I searched through a lot of threads on whether its safe to upgrade from a working Karmic install to Lucid via the upgrade manager. I found a few threads from around 1 month ago where some said it worked, others said they had problems with grub etc.
Does anyone know the current status of this? I would like to upgrade to Lucid but I don't know if its safe. Would it be better to use an install CD instead of the upgrade manager? Do I need to manually install grub rather than let the install program do it? (I think the upgrade manager doesn't give an option it just installs grub after the upgrade)
The title pretty much says it all, the sound on this system was working fine until I ran the upgrade to Lucid. I've tried everything in the standard troubleshooting guide, the sticky threads and plenty of forum searches but so far I've come up with nada. For some reason Ubuntu refuses to see my soundcard, no matter how much I twist and tweak it. It's an Asus M3A78 motherboard with an on-board Realtek ALC1200 chip (snd-hda-intel). Here's most of the relevant output, hopefully someone can easily spot what's going on because I'm getting snow-blind staring at the monitor. code...
1st post @ LQ. Ubuntu user since 2007ish. Lots of PC experience... now vexed by upgrade from 9.10 Karmic to 10.04LTS Lucid.
The problem: random freezes whenever I boot into Lucid as user through usual Grub menu. The freeze sequence is: 1- screen stops, 2- mouse pointer freeze w/ no effect on click but moves freely and keyboard is useless, 3- screen blacks out for about 30 seconds and then returns but is unusable and 4- constant HDD activity for about 5-10 seconds. I have waited several minutes for a recovery of some sort but no dice. I reboot via on/off or reset button. Ubu deletes 2 inodes and then I'm off and running again.
If I boot through the recovery console there are no problems at all. The recovery console sequence: 1- select recovery from Grub menu, 2- at recovery menu select drop to root command prompt, 3- give root password, 4- enter 'gdm' at console prompt, finish boot up in my only user desktop (not root.)
I have not been able to find any log files that show an error message, but I'm not so tech oriented that I would necessarily know one if I saw one. Through many hours of browsing posts describing Lucid problems @ UbuntuForums (one of which has over 1,000 responses) I have found my '.xsession-errors' file (attached) is full of data.code...
Last Monday I upgraded the Ubuntu from Karmic Koala to Lucid Lynx in my laptop (HP Compaq volna 515), and I have no sound. Searching in linux forums for an answers, I've got that (as far as I understand) there's no unique solution for this problem.
This is my lspci code...
Also, I tried to clean up the pulse audio .. What is funny for me is that pulse audio and alsa, and the audio players seems to work normally (no error of device not found or something like that).. except that there's no sound out from the speakers.
Any suggestion to discover if the problem is drivers, kernel, packages, or hardware failure? more important, how do I get the sound back?
After a Kubuntu upgrade from Karmic to Lucid on a 32 bit i686 my samba script in /etc/init.d/ was gone. Is that simply a bug or something going wrong during the upgrade, in which case I restore the script from backup, or is there a new way to start/stop/restart... samba in Lucid? Samba is working just fine after the upgrade BTW, both for print and file sharing over a mixed network.
I have Apache 2.2.12, Gallery2, PostgreSQL 8.4, and XCache (PHP cache) humming along on a Ubuntu 9.10 (Karmic Koala) server. Can someone recommend GUI postgreSQL admin tool for managing the database other than pgAdmin?
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
I just upgraded Ubuntu Karmic to Lucid alpha 3. It works fine except for a few things that can be expected in an alpha version. Anyway, I would like to know if it would be better to upgrade to the final release of Lucid or if I should do a clean install. I don't mind losing my files and settings because there is nothing important on my laptop, but it would be nice not to.
On the 28th of April I upgraded my system (laptop with "SIS Mirage 3 Graphics" video card) from Karmic to Lucid and my screen resolution was reduced from 1024*768 to 800*600. I tried during one day to find the suitable driver but no luck on SIS web page.
I eventually found it on the followwing address : [URL]
It works very well and the resolution has jumped now to 1280*800. The only remaining and identified problem is with grub2 : my system is dual-boot (Windows XP and Ubuntu) and the "recovery" mode does not work anymore for ubuntu, I will maybe have to wait for a next update.
I just had a look on the Virtualbox site and thus far there is no listing for a Lucid specific release.Can I use the Karmic release or is this going to cause problems? I don't want to use the Ubuntu OSE version because I need USB support.
Error during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
After doing clean installs of the last two Ubuntu Releases, Jaunty and Karmic, I decided to try an upgrade to Lucid. The upgrade went well and I'm satisfied with it, however I have a question about the repositories.All the sources in /etc/apt/sources.list correctly point to Lucid, but in Software Sources / Other Software I still see references to Karmic. Is this something to be concerned about? Can I (or should I) change them to Lucid?
Well the title says it all.. i don't want to lose all of my settings with a fresh install and I only have the desktop CD, so can you do the upgrade with it?
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
When Lucid released, I upgrade the Karmic in my Thinkpad R61 using
Code:
One things that remains until today is that when I'm using latest kernel (right now 2.6.32-24), the compiz run very slow, make the whole desktop unusable. When compiz is killed and using metacity, the desktop is running in normal speed.
Fortunately I still had the Karmic kernel (2.6.31-20) and booting using this kernel, everything run normally.
I just wonder what cause the latest kernel make compiz become slow. Is there any leftover application that I had to uninstall (maybe it's like pulseaudio's problem above), or any missing library/application that I need to install?
The sound is an onboard Realtek AC97 chip on my motherboard. It worked absolutely fine on my 9.04 Jaunty setup. My machine is dual boot with Windows XP and the sound is fine on XP, so it's not a hardware issue. Karmic seems to think there is no audio device present at all, which is obviously not the case.This is an AMD 64-bit machine running the x64 edition, although I doubt that has anything to with the problem. Everthing else in the installation went perfectly and the GNOME desktop seems significantly quicker too.
i used the Update Manager to upgrade from 9.04 to 9.10.. then it said:
NO VALID MIRROR FOUND
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date.
Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'jaunty' to 'karmic' entries. If you select 'No' the upgrade will cancel.
I choose yes, then is said that there's something wrong with the network I'm connected to..then it closes..the upgrade failed.
