Ubuntu :: No Sound After Upgrade From Karmic Koala To Lucid System / Get That Back?
May 28, 2010
Last Monday I upgraded the Ubuntu from Karmic Koala to Lucid Lynx in my laptop (HP Compaq volna 515), and I have no sound. Searching in linux forums for an answers, I've got that (as far as I understand) there's no unique solution for this problem.
This is my lspci code...
Also, I tried to clean up the pulse audio .. What is funny for me is that pulse audio and alsa, and the audio players seems to work normally (no error of device not found or something like that).. except that there's no sound out from the speakers.
Any suggestion to discover if the problem is drivers, kernel, packages, or hardware failure? more important, how do I get the sound back?
View 5 Replies
ADVERTISEMENT
Feb 5, 2010
I have the System of 9.04, but have a Live CD of Ubuntu 9.10 too. But, I do not want to download all the massive Upgrades. Still, Ubuntu 9.10 is the best! So, can I upgrade 9.04 to 9.10 using the Live CD? (Offline).
View 2 Replies
View Related
Jun 21, 2010
The title pretty much says it all, the sound on this system was working fine until I ran the upgrade to Lucid. I've tried everything in the standard troubleshooting guide, the sticky threads and plenty of forum searches but so far I've come up with nada. For some reason Ubuntu refuses to see my soundcard, no matter how much I twist and tweak it. It's an Asus M3A78 motherboard with an on-board Realtek ALC1200 chip (snd-hda-intel). Here's most of the relevant output, hopefully someone can easily spot what's going on because I'm getting snow-blind staring at the monitor. code...
View 4 Replies
View Related
Jan 4, 2010
I have read numerous posts about this subject, but being a novis in the Linux field, I cannot say that without explicit step by step instructions I am able to repair or tinker with anything under Ubuntu. In short, my sound has ceased to function. It did work for a period of time and suddenly no more. I have a 64 bit version of Ubuntu 9.1.
View 4 Replies
View Related
Apr 3, 2010
Recently installed Kubuntu karmic koala (9.10) and I have no sound other then the startup sound.
[Specs]
O/S: Kubuntu 9.10 Karmic Koala
Mobo: Asus M3A78-EM
View 7 Replies
View Related
Mar 20, 2010
I am running 64-bit (version 9.10) on a VMWare workstation. I am having an issue with my sound card. This is the message that I get when I start the VM:A device ID has been used that is out of range for your system. Sound will be disconnected I am running Vista-64 as my host OS. I know it might be easy to blame this on Windows, but I also have an XP guest OS and sound works fine there, so it is definitely an Ubuntu related issue.
View 1 Replies
View Related
Apr 23, 2010
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies
View Related
Mar 17, 2010
I upgraded to Karmic Koala and cannot play Dvds. I installed libdvdcss and still cannot play Dvds. Running 9.10 on a Dell Inspiron 1521
View 3 Replies
View Related
Oct 21, 2010
I currently use Karmic Koala (9.10) and want to upgrade to Maverick Meerkat (10.10). The thing is that Update Manager allows me to upgrade only to 10.04 (Lucid Lynx) but I cannot upgrade to Lucid Lynx because of a bug which freezes my keyboard and mouse. Also, upgrading first to 10.04 and then to 10.10 is quite time consuming. Can I upgrade directly to 10.10 from 9.10 without 10.04 acting as a mediator?
[URL]
View 4 Replies
View Related
Jan 29, 2010
I have recently moved to 9:10 and I found some problems with the sound card Intel. Reading some posts I managed to partially solve the problem and now I hear the music perfectly but only from the headphones: but I need to "unflug" external amplifier in gnome-alsa-mixer each time I reboot otherwise I not even feel the headphones
lspci:
00:1 e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
aplay-l
[Code]...
View 8 Replies
View Related
Mar 27, 2010
it has been a year since I've started using Ubuntu linux, and for being calm that everything is working properly, I would like to do a full system check. The only option I've found is on System=> Administration=> System Testing, but this wasn't what I was searching for (mainly because I don't know what is written there- I don't know enough for running this option). Is there something else I can do? maybe something through Terminal?I want to run such a check also because the system sometimes work slowly, and maybe something went wrong...
View 9 Replies
View Related
Feb 16, 2010
Where can i get an image of all the ubuntu repositories for karmic koala? i am using a windows machine to download
View 9 Replies
View Related
Jan 21, 2010
I reinstalled Ubuntu on my HP pc-40 computer. I used to run Hardy Heron and am now running Karmic Koala. The cd drive which had had issues for a while, broke after finishing the install, when I tried to get the cd out.I dont know if this has anything to do with it, or if my computer is too old for Karmic Koala, or if possibly the harddrive didn't appreciate being overwritten a second time - but the graphics are not working well (small squares of previous windows linger in my present browser window*)everythin is much slower, and many applications come up without a border, or their windows cant be moved with the mouse.
To top it off, while I tried to fix a bug with the terminal (no border) and uninstalled it, I couldnt install it back. So no terminal, which really makes even a newbie like me sad.If I cant solve it in a few days I will probably try to install a smaller distro via USB - I think Slax can be installed straight to USB without a live cd?
View 5 Replies
View Related
May 10, 2010
Laptop only has external display. When karmic boots 2.6.31-21 and initrd.img has finished loading, and I have taken quiet splash out of boot line, I get nothing on the external display until gnome come up. Does the kernel driver only recognise internal displays until X takes over, or is there something wrong with the karmic 855GM kernel driver?
View 1 Replies
View Related
May 4, 2010
How did it work out? What model machine are you using?
Just wanted to get some idea of stability/functionality.
View 9 Replies
View Related
Jun 9, 2010
I upgraded to Lucid from Karmic.Im now using gnome but would like to get back to KDE. Sadly it seems that even with kdm and plasma-desktop packages installed, I run into a problem at login.If I choose from the downwards facing arrow on the botttom left of the screen, and pick "KDE".Then when I log in, it shows the first icon (a hard disk), goes black and plunks me back on the login screen.This is a Karmic>Lucid upgrade process and I wonder if something got borked in the process.
View 4 Replies
View Related
Apr 30, 2010
I'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
View 3 Replies
View Related
Jun 15, 2010
I can't upgrade from Karmic to Lucid,If I try to use the update manager I get a message that says "Can't download release notes. Check your Internet connection". I've tried changing the repository and I get the same message, but I can log in to the Internet, and download and install any program from the repository. I also get regular updates for Karmic so the repository is fine.I tried the command line
Code:
~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando �rbol de dependencias
[code]...
View 3 Replies
View Related
Jun 21, 2010
I searched through a lot of threads on whether its safe to upgrade from a working Karmic install to Lucid via the upgrade manager. I found a few threads from around 1 month ago where some said it worked, others said they had problems with grub etc.
Does anyone know the current status of this? I would like to upgrade to Lucid but I don't know if its safe. Would it be better to use an install CD instead of the upgrade manager? Do I need to manually install grub rather than let the install program do it? (I think the upgrade manager doesn't give an option it just installs grub after the upgrade)
View 1 Replies
View Related
May 15, 2010
In the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
[Code]...
View 8 Replies
View Related
May 3, 2010
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Lilo is installed in the MBR of /dev/sda
sda1:
File system: ext3
[Code]...
View 5 Replies
View Related
Apr 26, 2011
1st post @ LQ. Ubuntu user since 2007ish. Lots of PC experience... now vexed by upgrade from 9.10 Karmic to 10.04LTS Lucid.
The problem: random freezes whenever I boot into Lucid as user through usual Grub menu. The freeze sequence is: 1- screen stops, 2- mouse pointer freeze w/ no effect on click but moves freely and keyboard is useless, 3- screen blacks out for about 30 seconds and then returns but is unusable and 4- constant HDD activity for about 5-10 seconds. I have waited several minutes for a recovery of some sort but no dice. I reboot via on/off or reset button. Ubu deletes 2 inodes and then I'm off and running again.
If I boot through the recovery console there are no problems at all. The recovery console sequence: 1- select recovery from Grub menu, 2- at recovery menu select drop to root command prompt, 3- give root password, 4- enter 'gdm' at console prompt, finish boot up in my only user desktop (not root.)
I have not been able to find any log files that show an error message, but I'm not so tech oriented that I would necessarily know one if I saw one. Through many hours of browsing posts describing Lucid problems @ UbuntuForums (one of which has over 1,000 responses) I have found my '.xsession-errors' file (attached) is full of data.code...
View 9 Replies
View Related
May 3, 2010
using update manager, i allowed my karmic desktop at work to begin the upgrade process to lucid on friday afternoon... i ran out of time, and headed home for the weekend. somewhere along the process, the screen locked. after arriving back at work this morning, i cannot unlock the screen, or even switch users. other threads in this forum seem to indicate that i should've aborted the upgrade, but... i didn't know enough to anticipate problems, and i guess i assumed that given the lengthy estimate to complete the upgrade, i could just pickup the process again on monday.
in any case, cycling the power didn't help, so i downloaded the iso, and have booted to the 10.04 'trial'. i was hoping somebody could help guide me through resetting a password on the on-disk os from the live cd... i'm ok with reinstalling if i can preserve my account's configs & prefs.
View 3 Replies
View Related
May 19, 2010
I just upgraded a Ubuntu Desktop 64bit system from Karmic (9.10) to Lucid (10.04). There were several PostgreSQL 8.3 clusters running on that machine. After the upgrade, postgresql was not able to run anymore.
The package postgresql-8.3 was marked "rc" in dpkg -l I was not able to re-install PostgreSQL 8.3 because of a mismatched dependency. There was no warning. I guess i should have read the release notes, which i didn't. There should have been a warning before it was too late to turn back and upgrade postgresql to 8.4 first. I don't see how this is supposed to work, ever.
I'd like to know if this would be considered a bug, if it is known already and how to correctly file this bug correctly if appropriate (ubuntu-bug ?)
View 3 Replies
View Related
May 30, 2010
if this is covered elsewhere. Could not find it (could be being blind) If I upgrade fro 9.10 to 10.04 LTS will I lose
1. My Gnome panel settings
2. My compiz fusion settings
and
3. Will EnvyNG still be able to manage m,y Nvidia drivers OK?
I realize there is always a risk with an upgrade but I was just wondering what you all thought the chances were that I may lose these settings.
View 3 Replies
View Related
May 5, 2010
I have an HP Mini 210 and I recently performed an Upgrade from 9.10 to 10.04 and noticed that the netbook is much more noisy now (and can get very warm). I am not sure wether is the fan or the hard drive spinning. I did a "top" but no process was high consuming. I also thought that maybe compiz could be responsable for it, so I disabled all the visual effects, but still no change.
View 5 Replies
View Related
May 6, 2010
After a Kubuntu upgrade from Karmic to Lucid on a 32 bit i686 my samba script in /etc/init.d/ was gone. Is that simply a bug or something going wrong during the upgrade, in which case I restore the script from backup, or is there a new way to start/stop/restart... samba in Lucid? Samba is working just fine after the upgrade BTW, both for print and file sharing over a mixed network.
View 5 Replies
View Related
Jan 5, 2010
After i upgraded to karmic i experienced that the sound of spotify was at times strange. When i started a new song there was some strange plucking sounds, can most be understood as the sound a old LP-player makes when there is dust on the record. Not much but more than enough that I can hear it and wish it wasn't there. After some time of playing the songs sometimes was totally distorted by "disturbance" and it became impossible to even hear that there was a song there. Like when you are out of reception of a radio channel.
I did some research and upgraded to the wine1.2 with "custom" pulsaudio drivers. Then the total distortion was gone, but the, always present, plocking sound still was there. I have tested adjusting PCM volume, have some volume on mono, upgrading to newer pulsaudio drivers. The same problem is when ever my dear computer i producing sound. Spotify,firefox, rythmbox and mplayer. I can't see any answers after spending some time on google. I hoped i could fix this without deleting and removing pulsaudio.
View 1 Replies
View Related
Jan 8, 2010
The sound is an onboard Realtek AC97 chip on my motherboard. It worked absolutely fine on my 9.04 Jaunty setup. My machine is dual boot with Windows XP and the sound is fine on XP, so it's not a hardware issue. Karmic seems to think there is no audio device present at all, which is obviously not the case.This is an AMD 64-bit machine running the x64 edition, although I doubt that has anything to with the problem. Everthing else in the installation went perfectly and the GNOME desktop seems significantly quicker too.
View 9 Replies
View Related
May 1, 2010
Just upgraded to Karmic using the update manger. After the update, sound is no longer working. When I go to system>preferences>sounds and go to the Hardware tab it says there are no devices to configure.
View 5 Replies
View Related
