Ubuntu Installation :: Tar.gz And Tar.bz2 Files - Unable To Access The Internet To Reinstall The Packages
Aug 10, 2010
I accidentally removed my network manager (gnome) from my system (via synaptic) and hence have not been able to have access to the internet to reinstall the packages. I have experimented with many commands (with help from others) in terminal with little success.
What I now did was downloaded a 'NetworkManager-0.8.0.999.tar.gz' file and a 'NetworkManager-0.8.1.tar.bz2' file (from a different comp) and have placed them onto my desktop. I have read the INSTALL instructions within and it is a tad complex for me as I am new to Linux. I understand I have to extract the files and compile them into a new folder (I think I would choose a file in the /home directory)- how would I go about doing this? Following this, I need to './configure' or 'make' or 'make install' the files
I'm trying to do a net install with the latest release of debian - but my ethernet card is not recognized/the drivers are not available because I have a card that requires a linux kernel version of 2.6.35. This is obviously a problem because I can't download any additional packages, and I can't update the version because I'm not able to connect to the internet. I have installed it, but it's only text (which I assume is because I could not install the graphical interface, correct me if I'm blaringly wrong here). So what can I do to install debian on my laptop and be able to use my Intel Centrino Advanced-N 620 network card?
I have been following (200 instructions on how to do a clean install without losing settings.I used the command<sudo dpkg --get-selections > /home/user/package.selections>to create a list of installed applications.My problem is that the instructions to reinstall those packages does not work. The code given is<sudo dpkg --set-selections /home/package. selections && apt-get dselect-upgrade>.However when I try and run this code I am told that "--set-selections takes no arguments".So I need some revised code to reset the list of applications for re-installation
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
After upgrading to Natty Narwhal my Crypt Keeper app will not launch. I am now unable to access secure files. Has anyone had this issue after their upgrade to Natty Narwhal? If so, How were able to resolve this issue.
I have a Rogers mobile Internet stick. When I plug it into a Windows laptop, it installs software that manages Internet. Would I be able to get Internet if I plugged it into my server running Ubuntu 10.04 LTS? What do I need to do to download Apache Web server onto my Ubuntu? I searched for Apache in Software Center but no results I'm not connected to the Internet so no packages updates so far.
I recently installed Ubuntu 9.10. I was unable to connect to the Internet with Firefox or to download packets using command line or Synaptic Package Manager, or run updates. I disabled IPv6 in Firefox and am now able to browse, but I still cannot connect to repositories, I cannot download packages, I cannot run updates either.
I was trying to configure a wireless network for my pc and it ended in a mess and now I dont see anywhere the wifi icon (yes, I have already tried "add notifications")
The thing is that it seems the whole network manager is not longer there
I have downloaded the package to reinstall it (Im writing now from a friend's pc) without sucess, because network manager needs other packages who are supossed to be downloaded from the internet while the installation, but I do not have Internet!
I just installed Ubuntu 10.10 today on my laptop (I installed it alongside Windows 7).
My problem is that I'm unable to access the internet; actually, I'm unable to access any wireless connection at all.
I'm using a Linksys Wireless-G Notebook Adapter (2.4 GHz) in my laptop.
From what I've read, normally, many wireless cards are detected by Ubuntu automatically when you install it. However, this did not happen with my card.
...So, I'm not really sure what to do in order to gain access to the internet.
i have windows xp and federo installed on my system on seperate partition and using grub loader for dual boot. Unfortunately am unable to boot the windows and it hangs with the blue screen and with safe mode it stops at mup.sys and doesnt proceed further.I tried booting with a windows xp CD but it looks like it is unable to recognize the disk even if i say boot with a CD in BIOS settings. Does anybody knows how to make the CD recognizable so that i can go into the windows repair mode.
I ran this line: aptitude purge x11-common and all common files, all the tools I need are gone from my desktop. I have an amd64 with ubuntu +gnome on it.
Is there a way to reverse this --other than installing 1gb of packages one by one?
I am using Ubuntu 10.04. My problem is that I am unable to access my internet using Ubuntu. My internet is running fine on Windows 7 installed on same system. I am a bit unfamiliar with Linux. I tried to configure my network settings but it didn't help. I have my system connected to my dsl router via LAN.
after installing some updates while on linux I am now unable to access the Internet when using vista. I m trying to solve this without success. Internet is still accessible from linux, and vista canl connect to the local network.
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
I have recently installed ubuntu 9.10. Earlier I had ubuntu 9.04. On that my internet was running perfectly well.After installation I created new connection as I had done for 9.04 version using "Network connections , Edit connections". However, after configuring connection(uname , password etc.) I wasn't able to access Internet.So I tried using "pppoeconf" utility. After using this now whenever I click on network connections applet on top panel , it shows in menu "device not managed".Can somebody point out what went wrong and what to do so as to be able to acess Internet in ubuntu?
I've deleted /etc/apache2 and did run: Code: sudo apt-get -o DPkg::Options::="--force-confmiss" --reinstall install apache2.2-common to get the default config back.
But starting the server via: Code: sudo /etc/init.d/apache2 results in:
Code: Syntax error on line 161 of /etc/apache2/apache2.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration line 160-163 look like this:
Code: <Files ~ "^.ht"> Order Allow,Deny # line in question Deny from all </Files>
The funny thing is that the exact same definition is in a debian lenny server config on another server. So why did this install a not working config?
I just removed apache2 via: Code: sudo aptitude remove apache2 sudo rm -r /etc/apache2 and reinstalled it via: Code: sudo aptitude install apache2 which also did not fix the config bug?
For testing I installed apache2 on another ubuntu 9.10 and did just copy the folder /etc/apache2 to my local installation - this fixed the problem. Still, why cant I reinstall apache2 with a working config?
When powering up with Linux, I get the message "THERE WAS AN ERROR CREATING THE CHILD PROCESS FOR THIS TERMINAL".I posted this on Newbies several months ago but received no replies. I hope this is the correct forum.I am using Windows XP Pro at the present.
On my Centos 5 box my internet won't work. I am unable to get update and I can't download any native programs. But I have Samba running and I am able to access all my files for my other computers.
To start off I do not have the ability to post in the Networking/Wireless thread. I attend DeVry university and in my school they recently rolled out "Bluesocket." Now that they have done this I am not able to access the internet utilizing my ubuntu laptop.I am able to connect to the network. When I open my web browser I am redirected to the "bluesocket" login page where I am able to successfully log in. The next step to accessing DeVry's internet service is to allow Bluesocket to do a scan using a Java applet. That scan is successful.
The results of the scan inform me that I am not being allowed to access the network resources because I don't have an antivirus or firewall program installed on my computer. I do not wish to have an antivirus or firewall program installed on my laptop to utilize DeVry's network resources. My question is what steps do I need to take to bypass/trick bluesocket?
I am using ubuntu (11.04) here, when i connect Bsnl broadband link(wired connection). Internet is connect automatically But unable to instal, upgrad and access Internet pages ..
can't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
Fedora 11 is completely unable to access the internet for some reason, and after some troubleshooting, I've determined the problem to my Motorola 2210 DSL modem. I know my connection is working fine, as it works perfectly in both Vista and 7. I've tried things such as grep 'Ethernet' /var/log/dmesg, filling in the information into the network settings manually, to no avail.
I've installed centos 5 on an old computer with success and it works great.I can access the web server hosted on the centos server from any computer on the wireless and wired local network. I can also use ssh (putty) and nx client from any computer on the local network (wired and wireless) to access the centos server.On the wireless router I've configured a port forwarding to the wireless network interface on the centos server. I can access the centos server from the outside (internet) through this port forwarding both through http and ssh or nx client.MY problem is that I can't access the centos server from the internet through the wired network interface. Any attempt to view a web page or login with ssh or the nx client will timeout.
I have a general question: can I install packages in my Ubuntu, just using the live-CD but no network connection?
I broke my Ubuntu(9.10) and now can not log in, so I want to reinstall gnome, unfortunately I could not connect to internet, so I wonder if there is a way to use the live-CD as a source for the new software.
I would be really happy if I don't have to preinstall the whole system.
My Ubuntu Remex Notebook had been install in windows7 by wubi, I want to reinstall it to solve some problems, but how to save my personal files in Downlads folder?
Installing from Live USB: Installing from USB on my desktop (used this method for laptop install) goes without a hitch. EXCEPT, I notice there is no support for my wireless card chipset (Atheros 7413, used /bin/lspci to find). I download the drivers for Linux, but I need Make to build the drivers...ok. I download the Make files from my laptop, make coffee, slap the makefiles onto a flash drive and run the configure file on my desktop version of SUSE. Whoops, need a c compiler (odd that openSUSE did not come with gcc? bit confused on that). If you can't tell by now, I've been using linux for less than a month so I am what you would call a noob? After the lack of c compiler, I drove to my office to snag some DVDs to download the DVD iso image, hoping it would have some form of c compiler/make packaged, since the description does say the DVD has more software (can't find any prebuilt versions of either...?)
Installing from DVD: This was my next step. I wrote the iso image to a DVD and proceeded to boot from DVD. The installer fails at the system analysis, saying it cannot "create a repository". writing the iso to a second DVD produces the same result. Googling has not yielded a solution. tl;dr can't use openSUSE on my desktop because my wireless chipset is not suported by SUSE. I need Make to build the drivers, but I need a c compiler to compile Make, and I need the internet to get both for my machine.
i would like to setup one of my old pcs as a file server and internet gateway; we are living in a large building shared with 40 others. the ubuntu box would be the one connected to the internet via ethernet and sharing connexion via wifi. i haven't started yet - presently, i am doing the ground work and reading before to start i understand sharing the internet is relatively simple and can be done from the GUI
What we would like is slightly like BT Fon or BT Open Zone in the UK: you can hook on a free network but in order to access outside (internet: email, web, ftp, etc) you need to login login would help us monitor fair usage. I imagine something with username and password for each user would do: as we are a few in the same building not everyone is actually paying for the connection and we don't want to end up with rather large excess bills. So the ones who are paying access both files and internet; those who dont just have access to the files on the local server.
Do i need Ubuntu server to set this up? What hardware would be ideal - given we are all far from rich but willing to have a nice setup
It would be great if you could share some knowledge around the topic and eventually provide some tutorial; also any heads-up on the hardware side would be great! (signal booster, etc - there's 3 floors and 3 buildings)
Attempting to use PLACES>Home (or Documents,Bin,Desktop,etc.)brings up the error message "There is no Windows program configured to open this type of file." If I open Open Office I can find all files in home, documents, etc. and open them.The computer is otherwise functioning normally but using the usual methods all the files that should show look empty. How did this happen? I was attempting to use WINE to load Avery Wizard (a Win utility) through AWsetup.exe. To do this I changed permissions for that file but I have subsequently removed the file and its subfiles using the terminal.
