Ubuntu Installation :: No ./configure Command When Trying To Install Tarball?
Apr 26, 2010
I've read a few other threads about installing tarballs and just about all of them mention running the ./configure script. BTW, I'm working on a machine without internet connection and I'm using karmic. I successfully extracted the contents of the tarball and a directory of those contents was created. I navigated into that directory and tried "sudo ./configure" as per some instructions I found on the net, but the result was "bash:./configure: no such file or directory".
I get this same error message when I try "./configure --help | less" Is "./configure" something that is meant to come as part of the OS or do I need to install that separately too!?! when I try to create a keyboard short cut for opening a terminal by using the "keyboard shortcuts" option in system > preferences the setting lists it as "disabled". Is there some way for enabling? I know how to get to a complete screen terminal by using ctrl+alt+f2 but I also want a shortcut for other terminal box which is accessible via the applications area.
View 1 Replies
ADVERTISEMENT
Apr 23, 2010
I tried to install gfortran on my computer. When I extract the tarball, I forgot the '-C' option of the command 'tar', which should be added, according to the instruction of installation.
That is to say, I wrote in the mp directory:
Then, the tarball creates a '/usr' directory under '/tmp' directory, and it contains only a /local directory, which contains only a /gfortran directory.
The thing is, when I modify the name of this directory, for example, from /usr to /usr-modi, I found that the name of the directory /usr under the root directory is also changed from /usr to /usr-modi.
How can I delete this annoying /usr directory under /tmp, without tragically affect /usr under the root directory?
View 4 Replies
View Related
Feb 23, 2011
how to install a tar.gz file in Ubuntu. I just reinstalled Ubuntu from scratch, so I don't have any additional software.
View 5 Replies
View Related
May 2, 2011
I recently downloaded a tarball which contains a .src file for a program to convert .ttf fonts to .cxf fonts for use in Qcad drawings. how to compile and install this program in linuxmint 9 or ubuntu lucid. What I downloaded from the ribbonsoft.com website is a tarball called ttf2cxf-0.0.0.1-src.tar.gz. It contains a directory /ttf2cxf-0.0.0.1-src, which contains three files: main.cpp, Makefile, and ttf2cxf. I can post the contents of these files. This is not a high priority problem but i have been messing around with this for a while and have made no progress.
View 9 Replies
View Related
Apr 9, 2010
i am working off of this link https://help.ubuntu.com/community/EOLUpgrades/Feisty and when i try to follow the instructions below "download tarball manually" i get this. chown: cannot access '/tmp/tmpaIgInN' : No such file or directory
View 9 Replies
View Related
Apr 1, 2011
Is there an "easy" explanation somewhere in the forum about how to install programs which are in tarball form? I am relearning much of openSUSE and unsure of the compiling commands, which one(s) should be ran as a user, which commands should be ran as root... I've done a search on this topic and it seems there is a difference in login between make, make install, checkinstall etc.
I understand I'll also need some developer packages to compile tarballs however I don't know which ones. The last time I unsuccessfully tried to work with tarballs was when openSUSE 9.x was current. It's been that long. There is a program I absolutely need, it's SecondLife which I haven't found in any RPM repositories. I've downloaded the "linux" version from their website. The file name is: SecondLife-i686-2.5.2.223426.tar.bz2 I have a 64bit Toshiba notebook running 11.4
View 4 Replies
View Related
Apr 4, 2010
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies
View Related
Mar 24, 2011
I had to uninstall a proprietary ATI driver because it wrecked my X server. Apparently I removed the wrong package, because now the X server won't even start, even with the "nomodeset" flag.
QUESTION 1.How can I configure WiFi on the command line with NetworkManager or ifup, whichever is easier?
QUESTION 2.Which packages do I need to download to restore the X server?
View 9 Replies
View Related
Nov 24, 2009
Ive been using linux for a few months now and every now and again i come accross a program that doesnt have a rpm package but says that it can be installed on Fedora using source. I'm familiar with build essentials and the following commands:-
tar xzvf package.tar.gz
cd package
./configure
make
make install
but from what i have read fedora uses a differnet compiler. I'm trying to install Buddi budget manager and the ./configure command doesnt work, which im guessing is because it doesnt have a configure file? Can anyone confirm how to compile from source and whether there are any tutorials specific to fedora.
View 4 Replies
View Related
Mar 19, 2011
I found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
View 3 Replies
View Related
Oct 20, 2009
how install and configure the apollo + ares??
View 2 Replies
View Related
Jun 5, 2011
I want to install a program from this website http:[url].... and i download the option " hydra-6.3-src.tar.gz".i tried following the instructions on this page: https:[url].... but when i get to the ./configure step it says "bash: ./configure: No such file or directory"
View 9 Replies
View Related
Apr 7, 2010
Doing a fresh F12 install on a Dell Vostro 430. Machine needs to have 2 Network adapters for our setup.The install seems to go just fine but the on board network adapter doesn't appear to get detected/configured. If I look in /etc/sysconfig/network-scripts all I find is ifcfg-eth0 and ifcfg-lo. Looking carefully at ifcfg-eth0 I see it's the second card that I've put in the machine.As a test I removed the second network card and did another fresh install of F12. This time in /etc/sysconfig/network-scripts all I have is ifcfg-lo. When I go to system>Administration>Network Device Control I see no network devices displayed.
Is this an issue others have seen with F12 or is it possible my on board network adapter has an issue?BTW I did check the BIOS to be sure that Onboard Lan was enabled and it is.output from "lspci -k " with both cards installed on machine (I only listed Ethernet controllers)
View 2 Replies
View Related
Dec 12, 2010
I have kubuntu 10.10 and I tried to install a driver for wireless card with the apt-get install command and did not work (firmwireb43....)
Anyway, I got my wireless to work afterwards, but now everytime that I install something through apt-get install command, it would install the program and then show the same errors from the previous installation attempt, how can I make it not to show anymore?
When I install kwrite, it'd show this (I'm installing it for the second time, I did this so you can see the error at the end)...
sudo apt-get install kwrite
No matter what I installed it'd show the same errors at the end (firmware-b43-installer)I just want it to dissapear.
View 8 Replies
View Related
Mar 29, 2011
I'm sitting here at school, and I need to forward a port from my router at home to my Ubuntu box also at home. I stupidly forgot to turn on external administration on the router, but I can still SSH into the server. Is there a way I can access the router through the server via the command line?
View 4 Replies
View Related
Nov 15, 2010
i configured DSL Connection using my broadband username & Password and while Connecting to net i used to click that Dsl connection to connect to net......but my connection does not last for long...it gets disconnected and shows wired connection s connected....so i have to click again(DSL Connection) to connect to net...... sometimes even i click for two or three times ....it wont connect...
i also need any other ways to configure DSL Connection in Command line ......do i need to configure PPPOE with username and password in command line using (sudo ifconfig pppoeconf)
View 2 Replies
View Related
Apr 4, 2010
my dads decided to try out ubuntu on his pc, so far everythings up and running smoothly. i am trying to get the video capture card working with tvtime. I have ran "lspci" in the terminal which has detected the following.
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev 02)
00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge (rev 02)
[code]....
I get as far as "make KDIR=/path/to/kernel/source/tree" and got lost, i am running ubuntu 9.10. What do i put where =KDIR is?
View 3 Replies
View Related
Jul 22, 2011
I have a large tarball which is bz2 compressed, and I would like to get a md5 sum of the files contained in it, as I have a separate directory on another server containing what I think are the same files. I want to check to see if the tarballs files are the same as the uncompressed files on the remote server. The files are big 10gb+ so I was wondering if there was a quick way without having to uncompress them all and then md5 them.
View 4 Replies
View Related
Nov 24, 2010
My daughter just broke her laptop screen. I can order another LCD - no problem, but until then she wants to use an external monitor. With Windows, this used to be no big deal, because I would hook up a monitor, hit a key combo on the keyboard, and everything would come up on the other monitor.I know how to do this using the GUI, but unfortunately, I can only see about a 2 inch strip at the top of her computer. I can see the gnome menu bar, and when I go into the Nvidia configuration, I can't make out anything below the tops of the two monitors it detects. (I was able to get it to detect both displays, but I can't see to press the "configure" button.)What I need to do, is configure the new monitor from the command line using the two inches of visible monitor that I have at the top of her broken LCD.
View 8 Replies
View Related
Jan 3, 2011
Is there a way I can configure gnome-panel with the command line? I want to be able to write a shell script to switch between my AWN desktop setup and my gnome-panel one.
Also (this is less important) is there an easy way to switch between Gnome and KDE? I would assume no, but if there is that would be cool.
View 4 Replies
View Related
Feb 6, 2010
i am new to ubuntu have migrated laptop from centos to ubuntu 9.10 i am customed to kdevelop scripting, i am however unable to install Kdevelop using commandIs there some issue with the respository configuration or kdevelop is not available with ubuntu 9.10.
View 3 Replies
View Related
May 6, 2010
Just installed Lucid from CD ROM. I have 2 HDDs. When the install screen came to ask about partitions, it didn't seem to want me to install it onto the same HDD as my XP/Ubuntu 9.10 partitions, so I installed it onto my other HDD. After it finished, I restarted and it appeared on GRUB. It takes me to a command line where it asks me for my desktop login and then my password.
It allows me to type in my login, but the password isn't so easy. It won't let me type it in. It's as if the keyboard stops working apart from the return key. I have no understanding of command line. As soon as I'd entered my password, it went on to tell me that there were no packages to install, and then stayed on command line as if I'd just opened a terminal. How would I get it to take me to my desktop?
View 3 Replies
View Related
Nov 7, 2010
I have just installed ubuntu 10.04 via a netboot install.When my system reboots I only have the command line - no gui. Could someone kindly inform me what command I need to run in order to get a GUI
View 3 Replies
View Related
Mar 1, 2010
Read about Moksha & would love to install it on f12. how do i go about getting d rpm or tarball.
View 1 Replies
View Related
Jul 25, 2010
I'm tryieng to install some software which requares php. I typed: Code: ./configure --with-php=/usr/include/php But in the end of configuration I get this warning: Code: configure: WARNING: unrecognized options: --with-php on Ubuntu systems it is okEverything installs ok. But on fedora I can not configure my software with php
View 3 Replies
View Related
Feb 28, 2011
I run bgpd (quagga) on CentOS5.5 after installed completely i don't found interface command as the following:BGPD_Server(config)# interface % There is no matched command.
View 1 Replies
View Related
Jul 10, 2010
Is there any other site where I can download the Bluecurve Debian Tarball? When I try to download from the Freshmeat site it gives me a 404 not found. I search the site, and nothing. Can Anyone Help Please?
View 5 Replies
View Related
Aug 28, 2010
I've been trying to back up my system to a tarball for quite a while now. I recently bought a tape drive, and it works. But I'm having a little bit of trouble getting tar to work--whenever I try to copy the files (either directly to the drive at /dev/st0 or to a tarball), I end up with a "file changed as we read it" error, and tar quits before the archive is done. Is there some way I can either prevent this from happening and/or tell tar to just skip that file and keep the job going?
Code:
$ cd /home
$ sudo tar -czf /dev/st0 soren {soren being my home directory, /dev/st0 the tape drive}
[sudo] password for soren:
tar: soren/.gvfs: Cannot stat: Permission denied
tar: soren/.local/share/Trash/files/From Removable Media/16GB Flash Drive Dump/Cliffs of Incognita/Cliffs of Incognita Music/Audio/Stereo 01_01.wav: File shrank by 7289884 bytes; padding with zeros
[Code]...
View 6 Replies
View Related
Jan 14, 2010
I've PHP5 installed on my server, and just recently I installed a new application that requires gd library.
understand that I can have gd library installed via apt-get install php5-gd command.
Question: do I need to remove php5 instance (which was installed together with apache2/mysql using tasksel command) prior to installing php5-gd?
View 1 Replies
View Related
Apr 5, 2011
I cannot install Kubuntu 8.04LTS. When I run the Live CD and click to install it gets me the box that should show me my hard drives and possible partitions but the box is empty. I get the same when booting to the Live CD and clicking on install. I have had this CD since Kubuntu 8.04 was released. So not knowing what might be wrong I figure I will ask here for what to type in a command line to install it. I know it is an old version but it is the last one with KDE 3.5.
View 7 Replies
View Related
