Ubuntu Installation :: Error Found While Installing Qt4 Designer Using Synaptic Manager

Apr 29, 2010

I am trying to install Qt4 designer using synaptic manager on my ubuntu machine but i am getting following error

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: Error To Run Synaptic Package Manager?

Feb 12, 2010

When i run Synaptic Package Manager.I have an errorE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.

View 1 Replies View Related

Ubuntu Installation :: Update Manager And Synaptic Error ?

Nov 10, 2010

Ever time I try to use Update Manager or Synaptic Package Manager I get this Error Message:

I have been wondering if I just need to do a fresh install. Am currently using 9.10 on a Compaq laptop which is prone to overheating and "freezing", usually within 2 hours. Maybe time to install 10.04?

View 1 Replies View Related

Ubuntu Installation :: 10.10 - Clamav From Synaptic Manager Getting Error

Jan 28, 2011

I am trying to install clamav from synaptic manager and returns this error: Quote: E: /var/cache/apt/archives/libclamav6_0.96.5+dfsg-1ubuntu1.10.10.1_i386.deb: el subproceso dpkg-deb -fsys-tarfile devolvi el cdigo de salida de error 2

View 2 Replies View Related

Ubuntu Installation :: Error When Launching Synaptic Package Manager

May 7, 2011

Ubuntu 11.04 was working fine and then when I went to open Synaptic, I got the following error:
An error occurred

The following details are provided:
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/viewizard.com_linux_debian_en
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.

I get this error when I try to load Synaptic. In addition to that, the Ubuntu Software Center does not work when I try to search for and/or look at applications.

View 9 Replies View Related

Ubuntu :: Opening Synaptic Packaging Manager - Command Not Found?

Feb 5, 2010

Attempting to upgrade Firefox to 3.6. On opening synaptic package manager I get :-

An error occurred
E: dpg was interrupted, you must run 'dpkg--configure-a' to correct the problem.
E:_cache->open()failed,please report.

On entering 'dpkg--configure-a' on terminal I get 'command not found.

View 5 Replies View Related

Ubuntu Installation :: Installing Package Through Synaptic Package Manager?

Aug 3, 2011

I have a problem when installing this package through synaptic package manager. this is :

libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.

View 1 Replies View Related

Ubuntu Installation :: Error When Trying To Run Update Manager Or Synaptic - Package Lists / Status File Couldn't Parsed Or Opened

Jun 7, 2011

I get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal

[code]...

View 3 Replies View Related

Ubuntu Installation :: Synaptic Package Manager/Update Manager Fail?

Jan 13, 2011

E: Type 'nchpad.net/ubuntu-wine/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-maverick.list E: The list of sources could not be read. The above is the console output when i type sudo apt-get update Update manager throws the same error so now I can't install or update software .

View 2 Replies View Related

Ubuntu Installation :: Update Manager / Software Sources / Synaptic Package Manager Not Working?

Sep 30, 2010

It started with Update Manager constantly recycling and not updating. When it starts it shows 295 files and 308MB waiting to download. When I click on 'Install Updates' it appears to go through the process, and then presents me with the same 'waiting to install' window again - and again, and again - in fact as many times as I care to click the 'Install Updates' button. No error messages appear. The 'Settings' button produces the same apparent process as the 'Install Updates' button, but doesn't present me with any other screen.

I've tried all the solutions I could find on these forums and nothing works. The sudo suggestions for Terminal usually produce error codes. adjusting a line in the 'hosts' file. When I tried this I was presented with the obstacle of not having access to the read-only file, and no matter how much I searched I couldn't find how to gain access . While investigating all these possible solutions, I was directed in turn to the Software Sources and Synaptic Package Manager applications, but when I attempted to start them, 'Starting Administrative Application' appeared briefly on the taskbar - and then disappeared!

View 7 Replies View Related

Ubuntu :: 9.04 - Error On Reloading Synaptic Manager

Jan 29, 2010

When I reload my synaptic manager I get this error:
"Could not download all repository indexes in ubuntu 9.04 Could not download all repository indexes".
Here's how my sources.list file reads: .....

View 4 Replies View Related

Ubuntu :: Synaptic Package Manager Error?

Jan 20, 2011

whenever i tried to open Synaptic package Manager the following messages shows:

E: Type '.net/tualatrix/ppa/ubuntu' is not known on line 2 in source list /etc/apt/sources.list.d/tualatrix-ppa-maverick.list
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.

Ubuntu Software Center, Update Manager, Synaptic package Manager all are jammed and indicates the same error. Except these everything works perfectly.

View 5 Replies View Related

Ubuntu :: Locate The Error Log For Synaptic Package Manager?

Jun 3, 2010

This morning, Update manager downloaded and attempted to install linux kernel image and header files but failed with some sort of error. I'm trying to locate the error log for synaptic package manager. Anyway I rebooted and everything seems to work okay. Did anyone else have this problem? This is from the history:

Code:
Commit Log for Thu Jun 3 05:45:42 2010
Upgraded the following packages:
linux-headers-2.6.32-22 (2.6.32-22.33) to 2.6.32-22.35
linux-headers-2.6.32-22-generic (2.6.32-22.33) to 2.6.32-22.35
linux-image-2.6.32-22-generic (2.6.32-22.33) to 2.6.32-22.35
linux-libc-dev (2.6.32-22.33) to 2.6.32-22.35

View 9 Replies View Related

Ubuntu Installation :: Installing Linphone-3.3.0 - Error Message Make File Is Not Found

Jun 14, 2010

I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.

I have given the link of the pastebin for ./configure command and make command..

View 4 Replies View Related

Ubuntu :: Error 'dpkg Was Interrupted' When Opening The Synaptic Package Manager

Aug 20, 2010

I keep getting an error message when opening the Synaptic Package Manager. "E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report." I also can't install any software from the software center. When I run the line in terminal, I get lost.

View 5 Replies View Related

Ubuntu Installation :: Update 10.10 - Error "unable To Update Because There Is More Than One Synaptic Manager Running"

Mar 13, 2011

after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.

View 3 Replies View Related

Fedora Installation :: Installing 32-bit Support Into 64-bit / Not Found' And 'error While Loading Shared Libraries?

Dec 1, 2009

Trying to launch Second Life gives the following error message:

You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux

This problem was easily found using search with solutions for Fedora 11.

The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.

The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.

"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."

Another post says that was all unnecessary as the following commands would do the same thing.

Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)

The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".

Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.

A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.

View 3 Replies View Related

Ubuntu :: Natty: Dpkg/xulrunner Error Synaptic Package Manager Or Update Does Not Work?

May 14, 2011

Since upgrading to Natty I have a very annoying issue and since I am unable to resolveWhenever I start the synaptics package manager I get the following message:An error occurred:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.Once I run sudo dpkg --configure -a from the terminal this is what I get:Setting up xulrunner-1.9.1 (1.9.1.18~hg20110309r27352+nobinonly-0ubuntu1~umd1) ...No further progress the machine hangs indefinitely on this, need to kill terminal to exit. Even hours waiting does not show any progress.

View 5 Replies View Related

Ubuntu Servers :: Open Synaptic Package Manager - Internal Error Opening Cache (1)

Jul 22, 2011

while trying to open synaptic package manager i get the following errer "E: The package clamav-daemon needs to be reinstalled, but I can't find an archive for it. E: Internal error opening cache (1). Please report."

View 5 Replies View Related

Ubuntu Installation :: 404 Not Found With Apt-get Update/synaptic?

Apr 6, 2011

I have a little problem on my relatively newly installed 10.10 Lubuntu that I can't quite figure out. I'm guessing it is a piece of cake for most of you ubuntu-veterans so I'm hoping a kind soul would save my day: The last couple of weeks, the apt-get update (and corresponding button in synaptic) does not manage to update all of my repositories, and I get a "404 not found" error at the end (see attached text file (hope I did that right, am a longtime lurker but haven't posted anything much yet)).

I realize that I have been doing some adding of repositories, and have written the wrong command a couple of times, which may be the cause of this (at least the two frescobaldi ppa errors). What I don't understand, is how I remove these faulty(?) repositories, so that my system stops claiming being unupdated. After searching/googling the issue I tried looking for the corresponding entries in sources.lst, but to no avail.

ps. my system is in german, the messages say "W: Failure when getting.." and "E: some index files could not be downloaded, they were ignored or others were used in their place". (rather badly translated)

View 2 Replies View Related

Debian :: Error While Installing New Packages With Synaptic

Jul 8, 2015

When I try to install new packages I get following errors

Code: Select allE: cups: subprocess installed post-installation script returned error exit status 1
E: ntp: subprocess installed post-installation script returned error exit status 1
E: rsyslog: subprocess installed post-installation script returned error exit status 1
E: at: subprocess installed post-installation script returned error exit status 1
E: exim4-base: subprocess installed post-installation script returned error exit status 1

[Code] ....

Here is some detail

Code: Select allSetting up cups (1.5.3-5+deb7u6) ...
insserv: warning: script 'S99pcloudd_init' missing LSB tags and overrides
insserv: warning: script 'pcloudd_init' missing LSB tags and overrides
insserv: script pcloudd_init: service pcloudd_init already provided!
insserv: warning: script 'pcloudd_init_start' missing LSB tags and overrides
insserv: There is a loop at service minissdpd if started

[Code] .....

View 14 Replies View Related

General :: Debian Synaptic Package Manager Error: Xserver-xorg Stripped?

Feb 10, 2011

I have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attachedDebian_error_msg.png? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.

View 1 Replies View Related

Ubuntu Installation :: Synaptic Repository Index Not Found?

Jun 7, 2010

Ubuntu 10.04: I get the following error in Synaptic: "Could not download all repository indexes" "Could not get [URL]...86/Packages.gz 404 Not Found" (translated from Norwegian).[URL].. does not exist, but it does for Karmic (change lucid for karmic in the url). How do I correct this in Synaptic?

View 2 Replies View Related

Ubuntu Installation :: Can't Connect To Synaptic Package Manager?

Jan 1, 2010

Have a new Dell Vostro A90 that came with 8.04 and I have installed 9.10 from a CD that was mailed to me. I can connect to the internet with a wired connection, but I cannot connect wirelessly. When I've tried to install the broadcom driver by going to Synaptic Package Manager and hitting reload, I get a message that 1 of 15 packages is downloading, but nothing downloads and I get a failed message for each of the jobs. Any clues as to how to proceed from here? I am very new to Ubuntu.

View 9 Replies View Related

Ubuntu Installation :: Synaptic Package Manager Not Working?

Jan 16, 2010

After installing the 'getdeb' and 'playdeb' debian packages that automate adding those repositories for [URL] my synaptic package manager started acting up giving me this error: ould not download all repository indexes The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. Problem executing scripts APT::Update:re-Invoke '/usr/bin/daptup --pre'Sub-process returned an error code I am a long haul 48 state truck driver and it may be a couple days between replies until I can get to the next Wi-Fi hotspot.

View 3 Replies View Related

Ubuntu Installation :: Cannot Open Synaptic Project Manager

Sep 24, 2010

I was trying to install java on 10.04 in firefox. Now whenever I try to get new software, there is none to be found. I am getting the error message "E: Malformed line 54 in source list /etc/apt/sources.list (dist parse) E: the list source cannot be read". To top it all off, I still cannot get java to function. I am pretty new to this.

View 7 Replies View Related

Ubuntu Installation :: Synaptic And Upgrade-manager Failure?

Mar 27, 2011

1. Update-manager panel icon changes into do-not-enter traffic sign.

2. If you want to re-install Update-manager using Synaptic, then Synaptic opens for a while and then closes by itself.

View 3 Replies View Related

Ubuntu Installation :: Get Update-manager And Synaptic To Agree?

Apr 24, 2011

Is it possible to get them to show the same result.

update-manager says I need 315 files @ 302mb to download synaptic says 315 @ 318mb (using "mark all upgrades" button, then going the summary via the apply button )

this is on a machine with a clean install of maverick without anything new installed/changed from the defaults. Are these the same 315 packages and is it just a discrepancy in the way they calculate the size?

I used "sudo apt-get dist-upgrade -s --print-uris > upgrade.txt" to get me the same 315 packages, but unfortunately it seems the simulation switch (-s) stops it from actually printing the uris (which would include the size info) so no help in trying to establish where/what the discrepancy is.

This is just the 1st step in me understanding the whole process so I can do what I outline in my long rambling post [URL]

View 4 Replies View Related

Ubuntu :: Synaptic Flash Error: Conflicting Packages - Not Installing Flashplugin - Installer

Mar 28, 2010

I open up Synaptic Package Manager, I get the dialogue, "You have 1 broken package, use the Broken Filter to locate it." So I do, and I find flashplugin-nonfree. So I try to reinstall it, and the two packages that are installed are flashplugin-nonfree and flashpluin-installer. However, I always get this error message:

[code]...

how I can fix it? I know it has SOMETHING to do with conflicting packages

View 4 Replies View Related

Ubuntu Installation :: Synaptic Packet Manager Doesn't Work \ Fix It?

Jul 2, 2010

I run Ubuntu 10.04 and everything worked fine until I downloaded bunch of games and programs using synaptic and it stopped working. When I try to install anything it tells me to check my internet connetction which i know works just fine, it says that cannot connect to [my_ip]:8080 and I manually opened the port and nothing, i disabled the firewall and have no proxy running, it also gives me the info that connection(111:refused) What do I do?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved