Ubuntu Installation :: Installing HP Driver - Error: No Output Seen In Over 300 Sec
Sep 10, 2010
error: No output seen in over 300 sec... (Is the CD-ROM/DVD source repository enabled? It shouldn't be!) error: Package install command failed with error code 255 Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ?
I've tried this [URL] but it didn't work for me. My sources.list already had the #. By the way I'm a new user to ubuntu and I'm having a pretty good time. Almost starting to feel at home in this OS. edit: I'm sorry. I realized I posted in the wrong section.
View 2 Replies
ADVERTISEMENT
Jan 18, 2011
Laptop: Compact Presario C706NR Notebook Pc. Ive just tried to install Ubuntu 10.04 and unluckily failed... Ive checked the hard disk and it has responded error: 1files. [Errno 5] Input/output error
I'm running it on a USB. at the moment im using it as my comp. my windows vista is gone. Id like to fully install any recommendations?
View 2 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Jan 30, 2011
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
View 7 Replies
View Related
Mar 16, 2011
I'm new to Fedora and the Red Hat way of doing things, having been a Ubuntu/Mint user for the last 5-6 years. I've been using Fedora for my daily computer now for the last 3-4 months - a change that has definitely been for the better! However, earlier this morning I went to install a .rpm, and yum output via terminal the following error:
Code:
[leeky@darkstar ~]$ sudo yum install opera
[sudo] password for leeky:
Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit
Adding en_US to language list
Loading mirror speeds from cached hostfile
* fedora: mirror.netrino.co.uk
* rpmfusion-free: mirror01.th.ifl.net
* rpmfusion-free-updates: mirror01.th.ifl.net
* rpmfusion-nonfree: mirror01.th.ifl.net
* rpmfusion-nonfree-updates: mirror01.th.ifl.net
* updates: mirror.netrino.co.uk
Error: database disk image is malformed
[leeky@darkstar ~]$
This is the first time I have received this error. I've now tried the following methods of resolving this problem with no luck:
1. Code:
yum clean all
2. Code:
yum clean metadata
yum clean dbcache
yum makecache
3. Physically removing the /var/libs/yum folder, and creating a new "yum" folder, and then step two above to rebuild it. Either way the problem then still returns in terminal.
View 2 Replies
View Related
Jul 28, 2010
I'm trying to install Wine on Fedora 13, I tried installing it from the "Add/Remove Software Repository" but the installation fails, I tried installing it from the Terminal using the following command as root: "yum install wine"
Here's the output I get:
Code:
View 13 Replies
View Related
Nov 5, 2010
10.10) now, and only use windows as my DVR (what im currently trying to change). To that end, i have a Hauppauge 2250 video capture card, and Steven at KernalLabs has an alpha release that has been said to work very well with mythTV.
Anyways, i followed one of the posts and successfully compiled the driver using "sudo make menuconfig." I attempted to install with the "make install" command, and the first half of the driver seemed to install and the second half (firmware related) received errors.
make -C firmware install
make[2]: Entering directory `/home/mlavigne/saa7164-v4l/v4l/firmware
Installing firmwares at /lib/firmware: vicam/firmware.fw cp: cannot stat `vicam/firmware.fw: No such file or directory
dabusb/firmware.fw cp: cannot stat `dabusb/firmware.fw: No such file or directory
dabusb/bitstream.bin cp: cannot stat `dabusb/bitstream.bin: No such file or directory
ttusb-budget/dspbootcode.bin cp: cannot stat `ttusb-budget/dspbootcode.bin: No such file or directory
[Code]..
View 3 Replies
View Related
Jan 20, 2010
I am new to Linux, but I can't produce any sound out of my speakers. So I downloaded the driver for my sound card from my motherboard manufacturer (it is an on board sound card). Now, if I am right I need to run ./configure . I did this and the following thing happend: Code: checking for gcc gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix...
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
[Code]...
View 7 Replies
View Related
Nov 28, 2008
I selected the zc0301 driver as module when i compile the kernel...and i copied the "zc0301.ko" file from default kernel...but when insert using "insmod" its not working..showing the error..
insmod: error inserting 'zc0301.ko': -1 Invalid module format
How to insert this driver?
View 9 Replies
View Related
Apr 6, 2011
I am trying to reinstall ATI propietary graphics driver fglrx on Xorg 1.10.0.901, but it always fails with (something similar to): Code: ./default_policy.sh does not support version default:v2:x86_64:lib32:none:[my kernel] make sure that version is correctly set by --iscurrentdistro
I am not sure what is it trying to tell me, neither I don't know why lib32 is in the list. (It's 64bit Gentoo system). It used to work in past, but now I can't start X at all. Using my already installed driver produces Segmentation fault, X without any configuration stops on no devices found.
EDIT: Alright, I just discovered that fglrx driver does not support higher versions of X.org than 7.6, and I have 1.10.0.901 version installed. EDIT2: Actually, later I found out that my Xorg is supported by that driver, so I think it was the mess in packages&Xorg configuration which caused it. Nevermind...
View 1 Replies
View Related
Jun 5, 2010
I have acer laptop with ATI Mobility Radeon HD 5470 graphics card. I have downloaded ATI Radeon 5xxx driver from ati official site. When I ran it using the command below, it gives me the following error
command:
Error:
Removing temporary directory: fglrx-install.OiFpw4
View 14 Replies
View Related
Mar 22, 2011
I recently installed my redhat 6.0 and there was no internet connection so i read some threads that guided me to try and detect my network card which detected nothing. I then went ahead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
View 14 Replies
View Related
Mar 17, 2010
The relevant details of my setup are:
Samsung R522 laptop
Realtek RTL8192E wireless network controller (PCI)
Fedora 12, kernel 2.6.32.9-70.fc12.i686 (automatically updated using software update)
My problem is that my wireless card has never worked - basically there aren't any widely available linux drivers, and there are many threads on getting the RTL8192E to work on many different forums, e.g. here, but none specifically for Fedora, so I think that this thread could potentially guide many more users. FYI, my hardwired network connection works perfectly.
Fantastically however, by emailing Realtek support, they'll send you their Linux driver, which most people have claimed works perfectly (although why they haven't just put it on their website is beyond me). SO, I've got a Linux driver for my wireless card. When Realtek emailed me to send me the driver, they said to just 'cd' into the driver directory, then do
su
make clean
make
make install
reboot
./wlan0up or ./wlan1up
OK, so I tried to do this and get the following error:
make: *** /lib/modules/2.6.32.9-70.fc12.i686/build: No such file or directory. Stop.
make: *** [all] Error 2
I don't know enough about linux to understand this error. I really don't want to have to recompile my kernel, and I hope there is some way to install this driver with not too much hassle. How to overcome this error, and install my wireless driver so I can get wireless network access on my Fedora 12 operating system. I've found Fedora 12 really easy to use so far, but this is proving quite hard!
This is the output of 'ls -lh' in the folder which seems to be causing the error, namely /lib/modules/2.6.32.9-70.fc12.i686/
total 3.1M
lrwxrwxrwx 1 root root 46 2010-03-16 22:53 build -> ../../../usr/src/kernels/2.6.32.9-70.fc12.i686
drwxr-xr-x 2 root root 4.0K 2010-03-03 05:28 extra
drwxr-xr-x 11 root root 4.0K 2010-03-16 22:53 kernel
-rw-r--r-- 1 root root 498K 2010-03-16 22:53 modules.alias .....
View 7 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Jul 16, 2010
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
View 1 Replies
View Related
Apr 3, 2011
I've been experiencing a problem when I try to install Ubuntu 10.10 and 11.04 on my girlfriend's notebook. In the middle of the installation process a window pops-up saying "[Errno 5] input/output error". This has happened with both versions and I can't get through it, no matter what.
View 5 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
Jul 3, 2011
I'm trying to install ati-driver-installer-9-3-x86.x86_64.run in my laptop with radeon x1200 series. While installing, I got this: Quote:
./ati-driver-installer-9-3-x86.x86_64.run: linha 187: erro de sintaxe pr�ximo do `token' n�o esperado `(' ./ati-driver-installer-9-3-x86.x86_64.run: linha 187: ` # echo "The program '$script' returned an error code ($res)" >&2'
[code]....
View 2 Replies
View Related
Jul 8, 2010
I was trying to install drivers for my ati radeon 9550 and when i typed in the terminal this:
sudo apt-get update
sudo apt-get install libgl
i got:
W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9BF3BB4E5E17B5
a posle ove druge: Reading package lists... Done
Building dependency tree
[code]....
how do i add this repo to sources list and how do i install the public key?
View 1 Replies
View Related
May 23, 2010
I'm trying to install ubuntu 10.04 on my desktop. I would like to erase my old xp completely and have only ubuntu as my OS. I boot from cd but when I install it stops at 15% and keeps giving me this error:
Input/output error during write on /dev/sda.
It won't let me retry or ignore and when I cancel the installation continues until I get another error.
View 2 Replies
View Related
Oct 2, 2010
I got interested in it when trying to play Windows games on my Mac. I've tried WINE and didn't get anywhere fast, but thats another thread for a different forum.
For now I'd like to try Ubuntu. I downloaded the ISO and burned it to a DVD and a CD.
When booting up my computer I get this message:
I have no idea what this means. I've tried to find answers on this forum with no luck.
The computer in question:
iMac8,1
Intel Core 2 Duo
3.06 GHz
4GB Memory
NVIDIA GeForce 8800 GS (512 MB)
MacOS 10.5.8
View 3 Replies
View Related
May 1, 2011
Asus EEEPC 1215P
Intel Atom N550 1.5 GHz
2 GB DDR3
Ubuntu 10.10
Maverick Meerkat
Desktop Edition
Tried changing BIOS setting...
SATA Run Mode configuration
Enhanced AHCI
Enhanced IDE
Compatibility
Disabled
non of them worked
View 1 Replies
View Related
Apr 3, 2011
I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.
Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 5 Replies
View Related
Aug 28, 2010
I am trying to install v 10.04.1 and it works up till 34% and then it gives me that error. So annoying and i don't have any other OS's.
I am posting this from a bootable 9.10 CD which doesnt even partition right.
I have a 64 bit CPU but i downloaded 32 bit ubuntu.
View 9 Replies
View Related
Oct 10, 2010
I've managed to boot up ubuntu-10.10-desktop-amd64 using PXE, but when the installer is copying the files it fails. I've md5sum checked the iso and it is OK.
Quote:
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
View 4 Replies
View Related
Jan 17, 2011
The trouble I'm having is that when I load a bootable USB/CD of 64bit 10.10, I always get an error that looks a little like: "(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output error. Can not mount /dev/loop0 (cdrom/casperfilesystem.squashfs) on //filesystem.squashfs." I've done some googling and I've noticed people have had the same problem. They say the alternate downloads could be the problem, or the CD, and that I should use the UNetbootin application. I guess I should start with describing my build:
[code]....
I've tried:
1. Going to the DL page, DLing 64bit 10.10, and mounting the image to create a bootable CD (by the procedure offered on the DL page).
2. Using Unetbootin to create a bootable USB (this I did multiple tmes, with different versions: 10.10 64bit desktop, 10.04 64 bit desktop, and I'm about to try another DL except I forgot which one I'm using, but I'll find out in a bit )..........
View 9 Replies
View Related
Jan 20, 2010
I'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....
View 3 Replies
View Related
Jul 6, 2010
last night i have fresh installed ubuntu 10.4 on my computer. Then after that, I installed the updates. Lastly, i installed nvidia hardware driver so that i could use its graphical effects. After rebooting my computer, i've noticed that i was disconnected from the internet. And I was surprised that it is the cause of my internet disconnection because when i remove it, my internet comes back. What should I do with this?
View 7 Replies
View Related
Apr 24, 2010
I'm installing and configuring my first server using RackSpace CloudServers running Ubuntu Karmic Koala (9.10) and I'm now installing iRedMail. The installation runs successfully until I recieve this error:
Code:
The following packages have unmet dependencies: mysql-server-5.0: Depends: mysql-server-core-5.0 (>= 5.1.30really5.0.83-0ubuntu3) but it is not going to be installed
E: Broken packages < ERROR > Installation failed, please check the terminal output. I understand this is telling me there is some software that iRedMail (or something iRedMail is dependant upon) that needs installed. Is this correct? And if so, what is i needing installed and how do I do that (aptitude install example-package?)?
View 4 Replies
View Related
Oct 4, 2010
I'm trying to install a driver for a Jetway ADPE4S Daughterboard on Ubuntu 10.04 but coming up against some problems. When I use 'make', I get this error: make ARCH=x86_64 CC=cc LD=ld CROSS_COMPILE= V= -C /usr/src/linux-source-2.6.32 M=`pwd` modules make[1]: Entering directory `/usr/src/linux-source-2.6.32'
ERROR: Kernel configuration is invalid. include/linux/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it. make[1]: *** No rule to make target `code'. Stop. make[1]: Leaving directory `/usr/src/linux-source-2.6.32' make: *** [all] Error 2
Not knowing what to do, I've been playing around with it, and copied the files autoconf.h and auto.conf from a folder '/usr/src/linux-headers-2.6.32-25-generic', but that didn't help, it still says "No rule to make target `code'. Stop."
View 9 Replies
View Related
