I'm trying to install Wine on Fedora 13, I tried installing it from the "Add/Remove Software Repository" but the installation fails, I tried installing it from the Terminal using the following command as root: "yum install wine"
Here's the output I get:
Code:
Laptop: Compact Presario C706NR Notebook Pc. Ive just tried to install Ubuntu 10.04 and unluckily failed... Ive checked the hard disk and it has responded error: 1files. [Errno 5] Input/output error
I'm running it on a USB. at the moment im using it as my comp. my windows vista is gone. Id like to fully install any recommendations?
The title is pretty self explanatory, I was just wondering how to overcome this error, if I can...
View 9 Replies View RelatedAsus EEEPC 1215P
Intel Atom N550 1.5 GHz
2 GB DDR3
Ubuntu 10.10
Maverick Meerkat
Desktop Edition
Tried changing BIOS setting...
SATA Run Mode configuration
Enhanced AHCI
Enhanced IDE
Compatibility
Disabled
non of them worked
I am trying to install v 10.04.1 and it works up till 34% and then it gives me that error. So annoying and i don't have any other OS's.
I am posting this from a bootable 9.10 CD which doesnt even partition right.
I have a 64 bit CPU but i downloaded 32 bit ubuntu.
I've managed to boot up ubuntu-10.10-desktop-amd64 using PXE, but when the installer is copying the files it fails. I've md5sum checked the iso and it is OK.
Quote:
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
Everytime I attempt to Install Ubuntu or Mint, I get the above error and I am unsure as to why it keeps happening. I read on other forums it can be due to your optical drive so I tried 4 different burners and 3 different types of CD's.
I know they work fine because I use them for other PC's. I've used them on windows XP, Vista, 7 and Mandriva Linux without a single problem. It's only when attempting to install Ubuntu or Mint that I get these errors and it happens every time.
In the error it also mentions that their may be a problem with your HDD, but I've used that HDD for windows xp through its whole life, I only just reformatted earlier in an attempt to install Linux.
While running a simple backup using a basic rdiff-backup command such as: # rdiff-backup /DataDrive /BackupDrive
Got a pair of message lines in the error log for a few "problem" files. Each problem file had two lines similar to the following: ListError Directory/file01.jpg [Errno 5] Input/output error UpdateError Directory/file01.jpg rdiff-backup.tmp.1234 [Errno 5] Input/output error
I've been experiencing a problem when I try to install Ubuntu 10.10 and 11.04 on my girlfriend's notebook. In the middle of the installation process a window pops-up saying "[Errno 5] input/output error". This has happened with both versions and I can't get through it, no matter what.
View 5 Replies View RelatedI've tried to install Wine but I get this error: [Errno 14] HTTP Error 400 :http://linuxdownload.adobe.com/linux...ata/repomd.xml Trying other mirror.Error: Cannot retrieve repository metadata (repomd.xml) for repository: adobe-linux-i386. Please verify its path and try again Not sure what is happening here. Can anyone give me some idea and maybe a way to overcome it?
View 4 Replies View RelatedMy dad is out of town for a while, so I've been using his computer to rip my DVDs with Handbrake. He has Windows Vista installed, so I did a full installation of Fedora 13 on a thumb drive and just run everything off of that. However, when I went to delete some of the encoded videos after I had moved them to my computer, I got a system error that said 'can't delete files: I/O error.' Now, if I try to boot up Windows, his computer is stuck on a black screen checking a bunch of dlls. He'll be back in a couple of weeks, so I'd like to have it fixed by then.
View 2 Replies View RelatedI even threw some video DVDs at it to make sure it wasn't the disc.
Code:
[pickens@acer1 Videos]$ dd if=/dev/sr0 of=POTC.iso
dd: reading `/dev/sr0': Input/output error
5088+0 records in
[code]....
I am getting the same thing on my laptop running Mandriva, oddly enough. Two different drives, two different computers, two different distros and multiple DVDs.
When running rsnapshot tonight it failed with a bunch of
cannot remove `file': Input/output error
errors.
I navigated to the directory and tried to delete it manually and I got the same errors. I tried with 'sudo rm directory'. How else can I delete this directory? What would cause a situation like this?
I'm either missing the obvious or have four identically defective tape drives. Each is a Seagate or IBM Travan drive (yes, I know they're old and I need to access the data; they were in Win boxes) using QIC-80/DC-2120 media. I've been trying to solve this using three Fedora boxes (different versions) and one Debian machine.
The OS's recognize the drives and they show up as /dev/st0.
With no media in the drives, I get a status report; with media inserted, I get the same input/output errors.
Examples (all as root):
With tape inserted:
With no tape in drive:
With tape inserted
Everything I've found on Google suggests that the drives are defective.
I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
I have a strange issue with my RAID5 array - it worked fine for a month, a couple days ago it didn't start on boot with mdadm reporting "Input/Output error" - I didn't panic restarted my computer, same error. Then opened a Disk utility and it reported State: Not running, partially assembled - don't know why, I've pressed Stop RAID Array and started it again, voila - it reported State: Running - I've checked components list and there was nothing wrong with it. So I run Check Array utility, waited almost 3 hours to finish it and it worked since than, till today's morning - I've started my computer, and here we go, same error.
See screenshots:
This is an initial state just after computer startup:
This is after I stop and start RAID5:
This is a components list:
I can see nothing wrong there yet not sure why mdadm fails on boot. I do not really like the windows solution I guess, when I check my array again, it will work fine again, but it then can fail in the same way without known reason.
I don't know the format of these old floppie disks, ive tried
Code:
PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)
how i can go about reading this data?
when iam opening my dec_backup folder the folling error is appering :
the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now
When trying to get wine I do got this error.
Missing Dependency: kernel >= 2.6.29.1-52.fc11 is needed by package libdrm-2.4.11-2.fc11.i586 (updates)
As I understand I must update my kernel before I can move on. How do I do that? I would want a RPM package if that's available.
Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->
View 1 Replies View RelatedQuote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?
Code:
sudo fsck -t ext4 /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.14 (22-Dec-2010)
System: clean, 247383/983040 files, 1394162/3907803 blocks
Solution: drive is under warranty and it needs to be used this is not software problem
I'm new to Fedora and the Red Hat way of doing things, having been a Ubuntu/Mint user for the last 5-6 years. I've been using Fedora for my daily computer now for the last 3-4 months - a change that has definitely been for the better! However, earlier this morning I went to install a .rpm, and yum output via terminal the following error:
Code:
[leeky@darkstar ~]$ sudo yum install opera
[sudo] password for leeky:
Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit
Adding en_US to language list
Loading mirror speeds from cached hostfile
* fedora: mirror.netrino.co.uk
* rpmfusion-free: mirror01.th.ifl.net
* rpmfusion-free-updates: mirror01.th.ifl.net
* rpmfusion-nonfree: mirror01.th.ifl.net
* rpmfusion-nonfree-updates: mirror01.th.ifl.net
* updates: mirror.netrino.co.uk
Error: database disk image is malformed
[leeky@darkstar ~]$
This is the first time I have received this error. I've now tried the following methods of resolving this problem with no luck:
1. Code:
yum clean all
2. Code:
yum clean metadata
yum clean dbcache
yum makecache
3. Physically removing the /var/libs/yum folder, and creating a new "yum" folder, and then step two above to rebuild it. Either way the problem then still returns in terminal.
I have dir in my HD that is very important to me,but when I try cd commad to go in the dirI got this message:cannot access `./Lab': Input/output erroralso when use ls to view the currently dir and the other dir's also I got this message:"ls: cannot access Lab: Input/output errorLab"with touch:touch: cannot touch `Lab': Input/output errorwith mkdir:mkdir: cannot create directory `Lab': Input/output error
View 3 Replies View RelatedCan't copy DVD with dd - Input/output error
Code:
kevin@orangebox:~$ dd if=/dev/dvd of=~/Videos/backup.iso bs=2048 count=4169919
dd: reading `/dev/dvd': Input/output error
191160+0 records in
191160+0 records out
391495680 bytes (391 MB) copied, 154.38 s, 2.5 MB/s
We are running an C++ application in AWS EC2 instance (CentOS 5.4) mounted with an EBS Volume (say /mymountpoint). We do more simultaneous writes to the EBS Volume from our application. But at some point we get 'ERROR: Input/output error'. After this, 'ls -l /mymountpoint' command itself fails with the i/o error. The filesystem which we use for the EBS Volume is xfs. I unmounted the drive and done xfs_check and again mounted the drive. Now, everything seems to be working fine. But the issue still persists everytime when we do simultaneous writes.
I believe the following details will be useful,
[root@domU-12-31-39-07-81-36 StoreGrid]# cat /etc/redhat-release
CentOS release 5.4 (Final) .....
Output of dmesg :
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Filesystem "sdh": Disabling barriers, not supported by the underlying device
XFS mounting filesystem sdh
Ending clean XFS mount for filesystem: sdh .....
Starting XFS recovery on filesystem: sdh (logdev: internal)
Ending XFS recovery on filesystem: sdh (logdev: internal)
The XFS utilities are in v2.9.4
I wish to know what could be the possible cases for this error:cp: reading `filename': Input/output errorI am getting this message when I am trying to copy a big file of around 50MB.
View 2 Replies View RelatedI use the growisofs command from the terminal to do most of my burning. Mostly because i burn almost the exact same type of file every time so its pretty easy to set up. I've done this dozens of times and never once had a problem before. I loved it because it was so much simpler than doing this in windows where i would need to install a few extra programs and codecs. That was up until today where it started failing every single time i tried to burn something.
For some reason every time i try to burn a disc it gives me this error message:
Code:
I'm really at a loss as to why this is happening. Every thread i found that discussed this problem was mostly focused on k3b or brasero and never really answered the question. As far as i know nothing has been updated since the last time i burned a disc a few days ago. Everything is exactly the same as it was when it worked. The only thing i could think of that might have caused this sudden failure is that i flashed the firmware of another cd drive using the same sata port that this drive is currently plugged into, but that was in windows so i dont see how it could have affected this drive.
Code:
ubuntu@ubuntu:~$ ls -al /etc | grep resol
ls: cannot access /etc/mtab: Input/output error
ls: cannot access /etc/resolv.conf: Input/output error
[code]....
Quote:
Code:
ls: cannot access /etc/mtab: Input/output error
I don't like the look of this at all!
I'm trying to install ubuntu 10.04 on my desktop. I would like to erase my old xp completely and have only ubuntu as my OS. I boot from cd but when I install it stops at 15% and keeps giving me this error:
Input/output error during write on /dev/sda.
It won't let me retry or ignore and when I cancel the installation continues until I get another error.
I installed Ubuntu 10.04 two days ago and was using my 1tb passport external HDD with it to download and store files. However today whenever i try and copy/cut and past to the HDD i get this error message..
Error opening file '/media/My Passport/test.avi': Input/output error This is obviously very fustrating and i want to stay with Linux but i do need to fix this problem else im afraid im going to have to back to awful windows.