Ubuntu Installation :: Getting Options For Old Laptop?
Aug 19, 2010I'm looking to install Ubuntu but my laptop is an old T30. Are there things I can do when installing that will make Ubuntu run well on older hardware?
View 2 RepliesI'm looking to install Ubuntu but my laptop is an old T30. Are there things I can do when installing that will make Ubuntu run well on older hardware?
View 2 RepliesSo, I have an old laptop that used to have windows/ubuntu until the drive got fubarred (no physical damage). I shoved the laptop as side as I didn't use it much anymore (it's an old, loud 2.4GHz desktop p4 in a dell--mostly toshiba--laptop. pcmcia atheros based wifi card and an ATI m6 graphics card. Laptop was new back in 2002-03 maybe).The Cdrom drive had died a while back, and it's not worth buying a replacement. The bios doesn't support boot to USB. What are my options for getting Ubuntu on there (9.10 preferably)? The drive has been formatted already, so there is nothing to boot into right now.
I can pull the drive and hook it up to my desktop (windows 7 machine only right now) via USB, and partition it from there, but I'm not sure how to get the installer on there. The MBR of the laptop drive will also have to be rewritten. Is there a way I can create a dos partition, load it with files, and start a linux install that way (maybe with grub4dos or something)?Or can I somehow boot into an ISO image on a partition?The only other thought I have is creating a floppy disk that will allow a network boot, but I haven't looked into that. I basically just want something to bring with on vacation that I can get online with. Browsing from the phone leaves a little bit to be desired.
I installed 10.4 on my Satellite Pro via CD replacing XP. Screen resolution is now only 800x600 which fills only 3/4 of available screen space and there are no greater options in System Preferences Monitors. It is also operating rather slower than the previous OS, maybe these two issues are connected? I have checked Administration for any required Proprietary Drivers. There is just one for a modem which is activated. During installation I aborted it then closed down and restarted, which may have affected the process?
View 8 Replies View RelatedSo I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies View RelatedI'm in computer sales and I have a customer that wants to replace all his macs and windows computers with ubuntu. I don't know anything about linux but I heard that there is a strong community behind ubuntu He's asked me to send him an evaluation unit so that he can test it out with ubuntu and see how well it works. I personally support his idea of going with reliable, bare minimum spec computers to do a whole overhaul. But I don't want him to deal with compatibility issues on a regular basis..I was looking at the Dell D620-D630, what are your thoughts on these machines running ubuntu?
View 3 Replies View Relatedi'm just trying to get the sound working on my laptop I found a solution online 'Sound: add options snd-hda-intel model=dell-m6 to /etc/modprobe.d/alsa-base.conf.
View 1 Replies View RelatedI have installed UBUNTU 10.0.4 on my HP Laptop which has Windows Vista. When I select Windows Vista, my Wireless is working properly and Wireless turned ON icon with light is showing up. But when I select UBUNTU, I couldn't able see WIRELESS. Its showing as OFF and When I tap on Wirless ikon, its NOT turning ON. how to ENABLE Wireless options on my HP Laptop with Vista in it. PS: I have both VISTA and UBUNTU on my machine.
View 1 Replies View RelatedHow do I get advanced installation options on the LiveCD? In former versions, I could hit F4 for modes. Do I need to use the alternate CD instead?
For reference, this is what I'm trying to do.
I just bought an Acer Aspire 7535-5415 laptop with Windows 7. I have burned ubuntu onto a cd. When I try to boot up the laptop with the cd in the drive it just boots up windows as it would normally and I don't get an options to install ubuntu or anything. I've tried both a cd that I burned and an official cd I picked up in the computing science department at my university. The same thing happens in both cases.
View 1 Replies View RelatedFinally took the plunge and got myself an OCZ 32GB SSD for my main desktop. I'm getting some mixed info on the 'best' (and I know thats a personal option in the end) configuration for partitions, ect..
Here are my specs:
AMD Phenom x4
4GB 800MHz Ram
nVidia geForce 9500w/512MB
[code]....
but as for the partitions such as /var and the others, I'm not sure what the best options would be to get the best bang for my buck. Also, is a swap file required anymore, will I see an appreciable different in performance if I just did not use one? If I need one, should it be on the SSD or one of the other drives?
my two partitions (ubuntu and WinXP) worked fine, i always had a boot option at startup. however, my Win boot option simply disappeared. I did not do any update recently, so I do not really understand what could have happened. My /media/windows is also completely empty. when i try to open the windows partition, it says "could not mount".
View 7 Replies View RelatedI've recently been trying to attempt to install Ubuntu on a partition on my macbook pro OS X 10.6.6. I have attempted to create a bootable USB stick (as I currently do not have any CD's/DVD's to use). I have followed the guide on the Ubuntu installation page twice, word for word, command for command. Everything goes flawlessly, all the files are visible on the drive when I checked, and I have never received any errors in the terminal. The problem arises when I attempt to boot from the USB, it simply does not appear under the options when I attempt to boot. I have also checked the Start up Disk under system preferences.
I have attempted the installation on two different USB sticks, and the same problem on both, flawless to install to USB, but then it is somehow not booting. I have checked with the USB company and directly from the website it says that the PNY attache is capable of this. It is the 4GB model.
I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
View 2 Replies View Relatedi want to install Debian through LAN network, Here i have configured dhcp, tftp and pxe for net-booting.I have followed following link instructions for netboot: URL...For me network booting is working with the help of PXE but i am not able to get the option NFS for installing Debian through NFS,I am getting option only to install through mirrors and manually enter of the mirror.
View 1 Replies View RelatedI downloaded the Ubuntu ISO file and burned it to a CD-ROM. Booting from the CD on my laptop I select the language and selection screen appears with all the F1-F6 options below. I've tried all the selections and options through the F keys but that's as far as the install will go. My laptop is a Dell and it's only 3 years old with plenty of memory and HD space.
View 3 Replies View Related1. I have windows xp on my notebook compaq presario v2000.
2. Wanted to load linux as dual boot.
3. Tried with Suse linux, but there was some blank or black screen problem after installation.
4. Someone suggested Ubuntu linux.
5. Downloaded and burned ubuntu on a cd.
6. But this time during installation during partitioning there was a serious problem.
7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd.
8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space".
9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook.
10. So any comment why the dual boot partitioning option was absent in my ubuntu cd.
11. Or there is some thing to be activated in my notebook setting to enable dual boot.
Im trying to install Ubuntu 10.04 in a friends laptop,but everytime I put in the disc with the ISO it doesnt show the Ubuntu menu with the Installation options etc, it just starts up Windows normally, and when its on Windows it recognizes the disc and a window pops up showing the files within the disc (the ISO) and it doesnt let me install it.
View 7 Replies View Relatedi'v installed ubuntu 10.04 on 3 different desktops and 1 laptop. It has gone flawlessly on all 4. i a want to install it on my hp to dual boot(the others i just wiped the drives) but when i tell it to boot from the cd at first it looks like it might work, with the purple page, but after a few minutes, before i get to the install options i get an error message. my current operating systime is windows and i have an hp pavilion. with 2.5 gigs of ram and a descent graphics card.
View 3 Replies View RelatedI am trying to install Ubuntu 10.04 from a USB drive but every time I reach the option for changing the keyboard layout and press forward, it seems to get stuck. That is, the mouse icon shows that it is loading but nothing ever happening. I even went for a shower, came back and nothing.
View 1 Replies View RelatedI've had my laptop dual-boot with Ubuntu 10.03 and W7 for some time, and all has (mostly) been OK. Unfortunately, my windows installation was an upgrade from Vista, and always a bit of a pig's 4rse, so I deleted the partition and reinstalled it cleanly.
But now I no longer get a list of boot options, so I can't boot into Ubuntu.
Its partition is still there OK... I can get the dual-boot back...
I already have Ubuntu 10.041 and windows xp installed as dual-boot.I am installing another version of Ubuntu in a logical partition.On the last page of the live install guide, there are advanced options.There is a check box next to install boot loader.I already have boot loader from previous Ubuntu installation, correct?What were to happen if I un-check this box?The reason I ask is there were grub updates from previous Ubuntu install.
View 8 Replies View RelatedCan some one point me in the right direction as to how to fix this.I have mint 10 gnome on /dev/sda1, then I have mint 10 kde on /dev/sda3, all working great. I have just installed ubuntu 10.10 on to /dev/sda4 all good after the first reboot (when asked to remove disc) there is a screen that shows all of my boot options (ie ubuntu 10.10 mint 10 gnome mint 10 kde) pick ubutnu do a full upgrade including new kernal reboot and at the screen it only shows ubuntu 10.10.result of boot info script below.
[code]...
I am trying to install a dual boot.
I was unable to make any progress until I tried the f6 options.
Is there a list of what the f6 mean.
I am trying to install 10.10, dual boot with xp pro
been trying to get linux installed on a troublesome laptop for 48 hours now without any luck so thought I'd post here as my last option.
I've tried installing 10.10 desktop, 9.04 netbook remix and just this minute 10.04 netbook versions of ubuntu, as well as other versions of various linux distros.
I woke up this morning and burnt 10.04 netbook to CD (not usb) as I wanted to put it on an old laptop with max resolution of 1024x768. I put it in an external CD drive and it boots up to the options screen on the Live CD, where you can choose to 'try Ubuntu netbook without installing' or 'install ubuntu netbook' etc.
The problem is, I can't click (press enter) on any of the options. The same problem arose with earlier versions, i.e 9.04 netbook remix Ubuntu.
Laptop model: Compaq Presario R3000.
I have just tryed to install Ubuntu 11.04 onto a USB to install on a netbook. I used the software recomended to prep the USB and booted to it.
In the opening menu where you can select to install on a partition I am unable to press enter, it seems to just reset the menu. The keyboard seems to be working fine because I can use the arrow keys.
I have been unable to find a solution to this problem online, all I have found is this simular issue, with no resolution.
[URL]
The netbook I am using is the Samsung n220 which apparently works well with ubuntu.
I just installed a dual boot win7-Ubuntu 11.04. When I reboot, there is no list of OS options displayed, it just boots to windows. Below are the details of how I got to this point.I Used GParted to delete all partitions off a hardard drive. Then installed win7 from CD. Win7 works fine. Then I formated an ext4 partion and installed Ubuntu 11.04 from the iso CD. But on reboot I don't see a list of OS options. When I boot from the Ubuntu 11.04 CD, I can view the usual Unix directories in the hard drive Ubuntu root (bin, etc, lib, usr, var) and the /boot/grub directory. So Ubuntu looks like it got installed. What else can I trouble shoot to get the list of OS options displayed?
View 6 Replies View RelatedI have windows7 with partition of C:40G, D:40G, E:70.I want to install fedora15,so I use the tool "Disk Management" of win7 to shrink E:.Then I have E:60G and 10G unallocated.
I use Liveusb-creator and boot from usb.It works well and I can use fedora15 just like livecd.But when I install fedora to hard disk,I meet a problem and I don't know how to solve it.
The installation procedure comes "Which type of installation would you like?".There's five options 1."Use All Space" 2."Replace Existing Linux System" 3."Shrink Current System" 4."Use Free Space" 5."Create Custom Layout".I've already got 10G unallocated space,so I select "Use Free Space".But the problem is that the fedora installer popups a messagebox says something that means that I don't have enough space to allocate to fedora15.
I come back to "Which type of installation would you like?" and select "Create Custom Layout".The installer display 4 entries of my hard disk:sda1 unknown 0M, sda2 100M windows remain partition, sda3 with capacity 39900M, sda4 with capacity 112625M.The partition display of my hard disk is so strange and there is no free space.
Is the problem of win7 "Disk Management" or "Fedora Installer"? How can I really get some free space to install fedora15?
What options are there for hosting linux on Windows 7?I think vmware will work.Windows Virtual PC will work.What about XEN?Apparently HyperV won't work because I don't have Windows 7 server installed.What do I google search for: hypervisors? What do you recommend?I want to install and run oracle database and java and eclipse on linux. I only have a windows machine. Which is easier: installing bootable linux on a SD flash card or hosting via XEN or vmware?Are some linux distros better guests on Windows 7 than others?
View 2 Replies View RelatedI am running the RedHat 7.3 install off a CD to put the system on an IDE flash drive. The flash drive appears as /sda1 on my system during installation. When I install the bootloader from the install CD it gives me the option of MBR on /hda which I do not want do. I select /sda1 and it puts the bootloader on first boot sector (not the MBR?) Although the installation works, is what I am doing creating a bootable primary hard drive? The flash IDE drive needs to be installed in an embedded system so my installation options are very limited i.e. the system does not have a CD-ROM or floppy to boot from. Are there options to put GRUB on the MBR of /sda1 during installation? Such as, with fdisk or the "force disk primary" option? Or, doesn't it matter?
View 2 Replies View RelatedWhat are the standard, common PHP extensions that should be enabled when configuring a new php installation? I need ldap so I know I should include that, but what do most LAMP servers configure with their PHP installs?
View 2 Replies View Related