Ubuntu Networking :: ENABLE Wireless Options On HP Laptop With Vista
Jun 25, 2010
I have installed UBUNTU 10.0.4 on my HP Laptop which has Windows Vista. When I select Windows Vista, my Wireless is working properly and Wireless turned ON icon with light is showing up. But when I select UBUNTU, I couldn't able see WIRELESS. Its showing as OFF and When I tap on Wirless ikon, its NOT turning ON. how to ENABLE Wireless options on my HP Laptop with Vista in it. PS: I have both VISTA and UBUNTU on my machine.
View 1 Replies
ADVERTISEMENT
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Mar 30, 2011
I am using OpenSuse 11.4(32 bit) on my Lenovo B460 laptop, and as the title points, am unable to use wireless on it. The 'enable wireless' option from icon menu is not greyed out, however clicking it does nothing, it remains disabled.
lspci -vv shows:
"04:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
Subsystem: Broadcom Corporation Device 0510
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
[code]....
so it seems that opensuse knows my hardware but networkmanager doesn't! I have all broadcom packages installed as well as kernel-firmware installed.
View 9 Replies
View Related
Jun 22, 2010
I have fedora 13 installed in my laptop lenovo G450.
Inside the file networking-scripts I can find the ifcfg-wlan0.
But it can't find any SSID when I scan the network.
I tried operating manually also.
But it can't be connected to any network.
The wireless device is also powered on.
But I am not able to connect to the wireless network.
View 5 Replies
View Related
Feb 21, 2011
i have 3 comps(running ubuntu 10.04) and a laptop(running vista sp2). i have installed samba on all ubuntu comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet.the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.all the systems have a static ip.
View 9 Replies
View Related
Oct 23, 2009
I enabled VNC on my desktop the same way I did for Ubunut on my laptop but it's not working... It says connection closed which is a useless error message because it doesn't tell me what the ***** (I had this error appear randomly on Vista and the only way to fix it was to reinstall)
View 2 Replies
View Related
May 19, 2011
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies
View Related
Apr 30, 2011
I just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
View 2 Replies
View Related
May 11, 2011
I've had a host of problems since upgrading to 11.04 Natty Narwhal, so let's deal with these 1 at a time.
I've got a Hewlett-Packard Pavilion G60 laptop. Next to the power button is a handy wireless on/off button. This has always worked well with previous editions (9.04,through 10.10). first press toggles the wireless off, second press toggles it on.
Not so in 11.04. The toggle off works great, first time. But, it will not toggle back on. Not after any number of tries, not after restarting, not after booting into other OS's (9.10 and Vista) re-enabling it there and then booting back into Narwhal. to further complicate the issue, this feature bypass the network manager, so toggling the wireless off by the switch leaves me showing no wireless adapter in the network manager. I also restarted, switched from Unity to a Gnome session, but the issue still persists.
As my only network options are wireless, this has become a substantial inconvenience.
----
EDIT: so the network util is actually saying "wireless disabled by hardware switch". Also noticed it I enable it in 9.10, reboot to 11.04 (where I inevitably fail to re-enable it), then reboot into 9.10, it will initially be disabled. The key difference is in 9.10 I have the ability to enable wifi using the hardware button. It seems that 11.04 is remembering that wireless is disabled between boots. Is there a place it might be storing this value? If so, I may be able simply to set the value as enabled, since toggling that silly button isn't working.
-----
EDIT 2:
found this thread:"Wireless disabled by hardware switch" bug? - Natty
seems to be a similar issue. I'll be following how that one develops, too.
View 3 Replies
View Related
Jun 13, 2010
When i click the network manager icon it just says under wireless networks "Wireless network is not enabled" How do i enable it?
View 9 Replies
View Related
Sep 6, 2010
I used the windows executable wubii installation for xubuntu 10.04 I'm not dual booting.My problem is all indications in the user interface are selected "enable networking" "enable wireless" and my wireless switch was on throughout and was connected to the internet during the installation in windows.However
Code:
sudo lshw -C network
Returns
[code]....
View 2 Replies
View Related
Jan 14, 2011
I am a day old in ubuntu-world, and I am having internet issues. Yesterday, after i had installed ubuntu alongside windows 7. To begin with it did not detect wireless (not networks but wireless itself), so i figured it was something to do with the adapter and came to these forums where many things were suggested. none worked. So I restarted the system for good measure and lo and behold it detected wireless networks and connected to the internet almost immediately.
Now, after a day, when i have logged in to ubuntu again, there is no wireless detected. The same problem. When I right click on the network icon in the notification area i see that Enable Networking is checked but "Enable Wireless" is darkened. There is no way to check it.
Can anybody please advise as to what to do next. I am using ubuntu 10.04 LTS (Lucid Lynx I believe).My system config is i7, 512MB ram.
View 1 Replies
View Related
Feb 7, 2011
my computer-toshiba satellite currently running on ubuntu 10.10 i cant connect to wireless except when im at my parents house not to sure why it was working now all of a sudden it stopped while i was using 10.04 figure when i upgraded to 10.10 it would fix it self ..didnt happen so im stumped when i right click on the satelite it the top right of my screen it shows-
-enable networking-(witch is checked)
-enable wireless-(witch willnot allow me to click it)
-enable notifications-(witch is checked)
-connection information- (wont allow)
-edit connections..-
-about-
dont know why it wont allow me to enable the wireless
View 1 Replies
View Related
Jan 29, 2011
My wireless can connect to my router without a problem, but in order to do so (after boot) I must first disable networking in the Notification Area and then re-enable it. I don't mind it too much, but when other people use my computer, it's made painfully obvious to me, that this was never an issue with Windows 7 (as much as I despise MS).
View 9 Replies
View Related
Jan 12, 2010
I'm running 9.10 and I've installed rainlendar. It runs like a champ. The problem is I can't move the transparency bar in the options panel. I had this problem with Xubuntu when I was using it and all I had to do was enable compositing for it to work. I have no idea how to do that under gnome and I didn't see any option like that in compiz when I was using the manager.
View 1 Replies
View Related
Jul 7, 2010
I have recently installed ubuntu on my laptop. However I cannot enable the wireless on it. The card is registered and drivers are installed. From reading previous forums i can guess that its because its "Hard Blocked"" (assumptions). However the switch for it is in the on postion.
View 2 Replies
View Related
Jul 21, 2010
I have a LG S1 PRO, that to activate the wireless is necessary Fn + F6. How do I enable wireless on command? Since you can not activate in ubuntu with these keys.
View 9 Replies
View Related
Aug 22, 2010
We're on vacation here with free wifi and I brought two laptops. The older of the two laptops running Ubuntu 10.04 and a Broadcom wireless chip suddenly wouldn't work this morning. I checked and it says wireless disabled, however wireless is grayed out when I right click on network manager. I have -no- idea what to do. I've never seen wireless just die like that. I popped open the cover but the wireless card is fine. I re-seated it, booted back up, still no sign of it.
What can I do?
View 3 Replies
View Related
Sep 10, 2010
I updated from Ubuntu 9 to 10 some while ago and can no longer connect to the internet via wireless. The computer is a Medion 96290 with a USB wireless card. Running "lsusb" gives code...
This tells me a driver is installed but it may not be the correct one. I copied this driver from the Windows driver file.
Network Manager shows "Wireless Network" greyed out and "wireless is disabled".
WICD shows net8187b as the installed driver and that the hardware is present.
There is a wireless switch on the keyboard which it was not necessary to use in Ubuntu 9 and is inoperative in Ubuntu 10.
I have searched through and applied many suggestions without success and have posted this problem on a couple of forums, again without success.
View 6 Replies
View Related
Oct 8, 2010
I have been having some problems with my wireless connection. I am having to start my computer 2 times in order for my wireless connection to work. The first time I start up, even after I enable wireless it wont connect. If I reboot immediately and enable wireless it will then connect. I would like to be able to fix this problem since it has become really annoying to me to have to boot my computer 2 times every time I turn it on. BTW Network manager shows auto-connect, however it also shows i month ago as to the last time the connections were used.
View 2 Replies
View Related
Nov 28, 2010
I am newbie at linux and Ubuntu and I have some problems enabling my wireless. I have spent many hours searching for solutions and couldn't find one for me (maybe don't apply it right - I am newbie). I have HP Pavilion dv6, dual boot Win7 and Ubuntu. At Win7 wireless is ok but at Ubuntu I can't enable my wireless adapter, so my laptop can't recognise any wireless network.
View 3 Replies
View Related
Apr 13, 2011
How can I enable wireless injection?
[code]....
View 9 Replies
View Related
May 15, 2011
I am new to linux. I just installed linux on my PC and wanted to configure wireless network connections. I have entered SSID and mode is set to infrastructure. I don't know what is BSSID do I need to enter MAC address (of router?)?I need to connect to internet wireless can you please guide me ?
View 1 Replies
View Related
May 25, 2011
I have an Averatec 3200 laptop with a Intel PRO/Wireless 2200BG card. When I click on Network Connections, it says wireless is disabled. I checked my /var/lib/NetworkManager/NetworkManager.state file, and it said "wireless enabled=false" so I changed it to true.
It just goes back to false on reboot. I also ran rfkill unblock all, but rfkill list still shows that there is a hardware block on. The driver for this wireless card shows that it is installed. I'm not sure what to try next!I just bought this computer used, and freshly installed Ubuntu 10.10 on it, so can't say if it worked in any other distro.
View 3 Replies
View Related
May 26, 2011
i have jolicloud (i think it uses gnome) on my hp mini 110 and my internet has been working fine and everything until for some dumb reason i pushed the wireless on/off button on the front of the computer. normally on windows i would just have to push the button again but its not working with linux. how can i re-enable my wireless?
View 7 Replies
View Related
Jun 20, 2009
I've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
View 14 Replies
View Related
Jan 10, 2010
enable WPA encryption on my wireless connection? Wireless networks are detected and listed, so the wireless card is functional in the most basic sense, however, when going to connect to any particular network,I am not given the option of entering a WPA passphrase, only WEP, and as my router is set to use WPA, this is a problem.I am trying to get this going on a fresh Karmic install on a Toshiba A15-S157 notebook.Thus far, I have found this: https://bugs.launchpad.net/ubuntu/+s...ux/+bug/315489 which would seem to relate to my problem.I looked in my logs and saw this entry: Jan 10 16:06:35 cody-laptop firmware.sh[863]: Cannot find firmware file 'agere_sta_fw.bin', and have since found that file, and have downloaded it to my desktop. It seems like this may be the solution, but how to exact it, therein lies my (momentary) problem.
View 2 Replies
View Related
Jan 17, 2010
my wireless just stopped working. the network manager in my panel no longer allows me to enable wireless. the option to enable wireless is there, but it is grayed out and will not let me connect. i reinstalled my wifi driver but it didnt change anything. iwconfig shows that the card is working why is the network manager not?
View 7 Replies
View Related
Jan 22, 2010
I have an Eee PC 701 4G, and some time ago I disabled its wireless NIC in the BIOS to save energy. Now I've come to need it working again, but I can't re-enable it, because it always goes back to being disabled after I boot the eeebuntu installed on the machine. If I just enable it in the BIOS, reboot and go into the BIOS setup again, it's still enabled, but if I let the OS load it'll get disabled. I'm really at a loss here, how do I find out what's wrong? Could it be Ubuntu that does this?
View 3 Replies
View Related
Jan 22, 2010
I am using a Linksys WMP11 V27 pci card that supposed to be talking to a Linksys BEFW11S4 wireless router (802.11B) ...I am able to connect directly to internet (ethernet cable hooked to this wireless router) ... but for indepedence I need to go wireless.I defined the configuration using the Network Connections ... also through ndisgtk .. can't seem to get this two to consolidate.On /var/log syslog I see ....
an 22 14:27:10 ubucomputer NetworkManager: <info> Sleeping...
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): now unmanaged
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): device state change: 2 -> 1
[code]...
View 1 Replies
View Related
