Ubuntu Installation :: USB Key Isn't Present (with Error: No Such Device And The Uuid) - And Hangs On A Blinking Cursor?
Mar 15, 2011
I just attempted to install to a USB drive, and somehow in the process, GRUB overwrote my Windows 7 bootloader on the internal disk. My work laptop is now booting into a grub recovery whenever my USB key isn't present (with error: no such device and the uuid) - and hangs on a blinking cursor whenever the key is plugged in.I'm not familiar with what my options are for grub rescue, but ls shows (hd0) (hd0,msdos2) (hd0,msdos1) (fd0)
My laptop is encrypted, so I don't have much chance of recovery unless I can get back to the windows bootloader.
View 7 Replies
ADVERTISEMENT
Mar 11, 2010
I set my drives up with MY boot loader, and I boot several OSes.I installed Ubuntu and told it to place grub on the / drive, which is where I always put it with any other install and it works fine.I find now that despite telling the install where to put it, you guys have taken it upon yourselves to alter the MBR of the volume ANYWAY!
SO, what I need to do is re-install grub, but I see that you also have no repair facility on this disc either. All I want to do is use MY boot loader. Currently, when I point at the / volume it just hangs with a non-blinking cursor in the upper left.No other Linux installs I have performed over the years do this. I want the drive to boot by merely pointing my bootloader at that volume.It always has in the past, so what did you guys change? I want NO action on my MBR, but I DO want a working grub on the actual root volume, which is NOT the first volume on the drive.
View 9 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Dec 11, 2010
So I've a computer with a lot of disks which is running Ubuntu 9.04. The setup is made od a software raid 1 array of 200 MB for use in /boot (md0), then another raid1 array of the remaining space as a unique PV for the LVM2 vg0. This vg0 is split in many lv, for /, /usr .... and swap. A few days back, one of the raid1 disk went wrong. So as the raid is built on 160Gb disks and nobody in my town sells so little disks I bought a couple of 320GB disks. The partitioning was made like the original partitions, except that the second partition is way bigger than it was. I replaced the failed disk in the arrays, and now I've an md0 of 200 MB and an md1 of roughly 150GB as it was previously and all is in sync. This replacement was made using a rescue disk (in order to be sure that the machine was not locking anything...)
So I thought it was fine. But upon reboot on the hard disks, I get a fast GRUB message "error: no such device : <UUID ending in 4ec05>. when I start the first Ubuntu entry I get the same error. So I edit the boot entry, remove the "search --no-floppy --fs-uuid --set <UUID ending in 4ec05> " and boot the damn thing. When booted I ran :
[Code]...
View 9 Replies
View Related
Mar 9, 2011
I am trying to install any version of ubuntu (I even tried so far another version called jollicloud) but the result is always the same...The computer is a Dell Mini 9. I have pulled out it's SSD because it has broken.I managed to install about some months ago an ubuntu netbook version (10.04, not sure) which all worked fine from a 8GB usb stick Here are my steps:
1. Download ubuntu either netbook or standard version
2. Make a bootable flash with Unetbootin from ubuntu or other programs from windows
3. Put the flash disk and the second 8GB flash to the dell mini 9
4. Boot Ubuntu live from the first flash (sometimes I think I must put the second flash after the boot so it finds only the live version... If I have put both flashes sometimes it won' t boot)
5. install ubuntu to the other flash (to the 8GB flash drive)
6. reboot
and then...only a blinking cursor is appearing to the top left of the screen with nothing else happening...Shift does not do anything.I have some suspicion that there is no Grub at all but I am not sure for this.I am sure there is a way to make it because I ve done it before, but I don't remeber how!
View 3 Replies
View Related
Oct 21, 2010
I decided to swap my media center PC over to Kubuntu after I had some issues with the Ubuntu 10.04 to 10.10 update. It has had Ubuntu on it for probably 3 years now. Most notably, the same issue is occuring now with any installer later than 9.04 which leads me to believe it is all Grub2 related.
The install runs without errors, but after booting from HD I get only a blinking insertion cursor. No Grub at all. I've held in shift, nada. I booted to Live CD and reinstalled Grub manually but still no love. It acts as though Grub simply isn't there.
I do have a second hard drive in the box that has Ubuntu 9.04 on it that I use as a backup if the OS HD gets messed up, but it is second in boot order and shouldn't be causing an issue. Besides, if that HD was booting it would be giving me legacy grub, not a blinking cursor.
View 4 Replies
View Related
May 1, 2010
I have a single XP install on another partition, but can't boot to it now that I have upgraded to 10.04. Also, when starting Ubuntu, it takes a good 30 seconds to actually start booting ubuntu after I have selected it from the GRUB list (just sits there with a blinking cursor)
Noticed other users have been directed to run the boot info script, so here are the results from that.
Quote:
View 3 Replies
View Related
Feb 10, 2011
I am attempting to install Ubuntu 64Bit Server 10.04 on a new server.
Server Specs:
Xeon E5620
12GB RAM
2X 160GB 7200 RPM in RAID1 (Onboard Software RAID)
Super Micro X8DTI-8
I am doing a typical install with no special functions on a RAID1 onboard Intel array. I know the array works because I tested it by installing Windows Server 2003 which works fine. The RAID also shows as healthy in the BIOS.
This problem is very difficult to remedy because everything seems to install fine with Ubuntu but when you reboot after the install you get a blinking cursor _ and nothing else. It appears that something happened when loading the OS but it's impossible to get past the blinking cursor because you can't type anything or escape out of it. The only thing that it will register is Ctrl+Alt+Del which will restart the server.
The funny thing is it does not display the typical Sigkill and show processes shutting down. The screen goes black and it restarts only to return to the blinking cursor. I am on my 6th attempt at an install with ubuntu and I am seriously considering switching over to windows unless.
I am almost certain this is a RAID issue because I can load the Ubuntu on 1 drive without any issues but I always get the blinking cursor in the RAID.
View 1 Replies
View Related
Jun 5, 2011
I've tried to install Ubuntu 11.04 for the whole afternoon and I'm stuck.Reason why I use the alternate cd is that I want to use an encrypted logical volume (full system, not just home folder). I did not create the partitions myself, I simply used the installer option for "guided LVM with encryption".But now I have the problem that I finished the installation without error, but when I boot my laptop nothing happens. I do only get a blinking cursor, but no GRUB, which I installed too (because there is a nother hdd with win 7).
View 8 Replies
View Related
Jun 22, 2011
I'm unable to boot into my Windows OS so Im trying to install Ubuntu 11.04 on a separate partition, so I can somehow get access to the files on Windows.
I made a live cd and a flash USB, both of which when I try to boot from, will go straight to a blinking cursor and nothing else, it won't allow me to type and there are no error messages. So I can't even get the install started.
I made sure both the cd and flash USB are bootable from another pc from inside Windows.
View 1 Replies
View Related
Apr 21, 2015
I'm thinking about switching to Debian from Ubuntu, so I installed Debian (debian-7.8.0-amd64-DVD-1) in dual boot with my Ubuntu 14.10 (Uefi install). Installation process was OK (I think), I got a working GRUB that recognizes both OS, but Debian boots to a blank screen with a flashing cursor in the top left corner (Ubuntu boots perfectly). I also ran into some graphics-related problems while installing/booting Ubuntu, due to my AMD GPU graphics, that I solved adding the nomodeset option to the kernel in GRUB, but that no longer seems to do the trick here. Here's some info about my machine:
HP Envy 15
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
[Code] ....
I don't know why they are listed as microsoft basic data.
View 9 Replies
View Related
Jun 18, 2009
I installed F11 without issue but after rebooting all i got is a blinking cursor with no error messages or indeed any other form of feedback.
To check i was even getting as far as grub i went into rescue mode from the dvd and edited the grub.conf to remove the hiddenmenu option and set the timeout to something a little larger. This confirmed that grub does in fact seem to be loading fine. Selecting the Fedora entry still however leave me with just a blinking cursor.
Next i tried removing quiet from the boot commandline. same result.
Just in case i had the wrong disks configured in grub i tried swapping root(hd0,0) with every combination available with as expected various errors about either partition not being suitable or files not found.
Using grub to boot manually to a usb disk worked fine so grub does seem to work.
With no feedback at all i tried all the common options people suggest just in case the kernel is booting but not getting far enough to output to the screen. So far i tried noapic acpi=off nomodeset.
I tried installing 3 times so far with slightly different configurations just in case but still no luck.
Basic partition layout in case it helps:
/dev/sda <-- boot loader installed here.
/dev/sda1 /boot ext3 2GB
/dev/sda2 swap 4GB
/dev/sda3 / ext4 634GB
Various other disks are present but not part of the configuration. I double checked they are not mentioned anywhere in the common places like fstab.
View 5 Replies
View Related
Nov 23, 2009
I used the F12 DVD to upgrade my system, before all the NVIDIA warnings were posted. I have a Geforce 7100 (7 series) card and used the rpmfusion drivers on Fedora 11. After the upgrade, I get a blinking cursor at boot time. What I should do to repair the mess.
View 5 Replies
View Related
Jun 24, 2010
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
View 9 Replies
View Related
May 9, 2010
I just installed 10.04 and for some reason once the grub screen loads and I can pick what I want to launch (regular kernel, or rescue mode), it attempts to load and then I just get a blinking cursor. I've found that I can't load the live CD either unless I use the nomodeset flag. I read in another post that this problem should be fixed by editing the /etc/default/grub file to add the nomodeset flag, which I did via nano. However, the file also says you must run update-grub after you edit the file. I tried this and it said something like it can't find / (is /dev mounted?) The hard drive itself is mounted, so I don't know why /dev wouldn't be mounted. How can I get this problem solved so I can boot to 10.04 successfully from the hard drive? (I'm typing this from the live CD right now).
View 9 Replies
View Related
Jun 4, 2010
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
View 9 Replies
View Related
Oct 31, 2013
I installed Debian 7.2.0 (amd64) on a Toshiba Satellite C870D-121 with the graphic installer. It already has Windows 8.1 installed on another partition, and for Debian I'm not using the same partition of course. Actually, the Debian installation is replacing a Ubuntu 13.10 installation that was working fine.
After choosing Debian in the Grub menu, I can see the boot log entries adding and then the screen clears and all I get is a blinking cursor. After a while, some '^@^@^@' symbols appears. Of course I can Ctrl-Alt-F1 to get a virtual Terminal in order to login and try to investigate the problem, but so far I haven't been able to reliably identify the problem.
View 5 Replies
View Related
Apr 20, 2015
I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.
Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core
I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.
How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.
View 9 Replies
View Related
Aug 28, 2011
I am having trouble booting the install CD for Fedora 15? As soon as I select a boot option I get a grey screen with a blinking cursor even if I pick the option to use basic video. I have tried using the intel_iommu=off parameter which makes no difference.
I also seem to have a similar issue when trying to install Ubuntu 11.04 on this machine too. I am using a Athlon x2 5200+, 5GB Ram, ATI 3850 if that's.
View 1 Replies
View Related
Jun 11, 2010
just upgraded to Lucid. When booting, I get a blinking cursor on a black screen for 30 sec. Then I get some flashes of text about UDEV. Finally, I get a desktop after about 30 more sec.
Any way to speed this up? I've already tried disabling my nonexistent floppy drive in the bios, but it didn't help.
View 9 Replies
View Related
Sep 23, 2010
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
View 9 Replies
View Related
Nov 17, 2010
I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies
View Related
Dec 16, 2010
I have an Acer Aspire One AOA110 that came with Windows XP.
I created a usb flash drive install for Ubuntu 10.10 netbook edition and went through the install process (wiped disk clean, not a dual boot with WINXP).
Before install, I was able to run Ubunut from the usb key with no problems.
At the end of the install, it told me I needed to restart, so I clicked the "restart" button and the removed the usb drive. Nothing happened and it never restarted and just completley hung for about 20 minutes. I manually shut down the computer by holding the power for 10 seconds and then rebooted the machine. Now all I get after the "acer bios" screen is a black screen with a blinking cursor. If I press any buttons, the computer beeps at me.
View 9 Replies
View Related
Dec 27, 2010
Six months ago I installed Ubuntu 10.04 to my otherwise Win XP work laptop. I decided to continue to use Windows' boot loader as primary: I told the Ubuntu installer to put grub2 onto a separate partition, then used dd to copy the first 512 bytes into a file in my Windows C partition, then edited boot.ini to link to it - its a common technique that is described in many support forums and blogs. This worked fine, and continued to work until a few weeks ago. One day I chose the Ubuntu option at the Windows boot loader and got a blinking cursor at top left of screen and no grub2 menu. I was able to use SuperGrub2Disk to discover and boot from my grub2 install - so that didn't appear to be broken. I finally fixed it by dd'ing a fresh copy of the first 512 bytes of my /boot partition over to the Windows C partition. So somehow the Windows boot loader decided it no longer liked my original dd'ed file.
The only things I can think of that might have changed and caused this to happen are (on Ubuntu) an update to security packages using the graphical update manager that pops up (I rarely do a command line apt-get upgrade/dist-upgrade and certainly not in this time frame) and (on Windows) a Windows Update - as it is a work laptop I tend to take whatever essential updates it suggests. As you can see I managed to fix the problem. However does anybody have any similar experience or any explanation why this may have happened? Could an over-zealous Windows Update have caused it?
View 4 Replies
View Related
Feb 1, 2011
I tried to upgrade to Maverick (server version) usingsudo do-release-upgradeAll went well, but on the first reboot after the installation the PC hangs with grub prompt:error: the symbol grub_xputs not foundI guess it has something to do with my RAID1 setup:sda1/sdb1..RAID1, bootable (system partition, 20 GB)sdc1 ....swap partition sda2/sdb2/sdc2 ... RAID5 (data partition, 3 TB)I made a bootable (using UNetbootin) USB pen drive with 10.10 desktop on it and booted into this desktop version. Aftermdadm --assemble --scanI could successfully access (and mount) my RAID1 and RAID5 drives. However, the system itself does not boot.
after only having mounted /dev/md0 and browsed in the contents, the boot behavior has changed: now the PC does not end up in the grub prompt "the symbol grub_xputs not found", but instead a blank black screen with a blinking cursor left top is shown. Keyboard: no reaction (I tried Enter, Esc, any keys ... no reaction, just a blinking cursor).Then, I tried:
boot into USB pen drive 10.10 desktop
mdadm --assemble --scan ... result: /dev/md0 is available (the RAID1 of sda1 and sdb1)
mount /dev/md0 /mnt/md0
[code]...
View 8 Replies
View Related
Feb 10, 2011
I have rebuild my system, with an Asus motherboard M4A88TD-V EVO/USB3 with radeon 4250 integrated 8 Gb memory
Athlon II 4x 640 2 x 1 TB sata3 WD Harddisks I installed 10.10 64bit, and ran through the whole install with the alternate CD without problems, Installed grub in the MBR on the 120 Gb partition for 10.10, it even recognised my 2 3ware pci raidcontroler on which 8.04 is installed.
When I start I get grub, when I choose for 10.10 I get a black screen with a cursor blinking in the left uppercorner. Luckily I can start into 8.04. I have no idea how to continu. for now I will burn a knoppix cd so I can read the ext4 partition with 10.10 and hope to find something to solve this.
View 6 Replies
View Related
Nov 28, 2008
I'm a fairly new linux user and I seem to have a problem with ubuntu 8.10 after installing it.To make sure everything was working fine before i could do a dual installation, i ran the live cd and it worked like a charm.Everything works fine in the live cd....the internet, sound, graphic drivers (even the special effects seemed to be work fine)I thought wow...after having a bitter experience with Ubuntu 8.04 and 7.10 (I couldnt install those at all coz of driver issues and stuff) I thought this is it!So I used the wubi installer to install ubuntu in my D drive (I didnt wanna use C just to be safe as the primary OS is installed there). Gave it a healthy space of 15 gb. Finished the installation and the rebooted.I went inside Ubuntu which started doing its installation and copying of files and stuff. So far so good.....
And then once it finished its installation and copying of files (100 %), the screen went blank and i see a cursor blinking. I thought maybe its restarting and thats why it must be doing this.I wait for nearly 10 mins and nothings happening except for the cursor blinking on the black screen. I press the caps lock key to see if anything is processing. Nope. So i manually shut it down and then load ubuntu.It loads like 20-30%....rests for a while....and then it loads a bit (not completley)....after that it takes me to a command line asking me for my password and username.I enter those correctly. But it doesnt get me into the main GUI screen yet.
It shows me a lot of the this error msg:
-bash: /dev/null:Permission denied
I'm still in command line (or terminal to be precise). So i use 'startx' (something which i learned from my csci labs ) to start a new session. It showed signs of starting a new session (i can see the mouse pointer and stuff) and then poof....back to the command line again.So I shut it down and load it again in recovery mode. It shows signs of the same symptoms in the splash screen (going very slow after 20-30 % ) and then this time, before i'm asked for my username and password in the command line, it shows a lot of warnings: fake daemon running (or something like that) and i cant even use startx!So i didnt know what to do, uninstalled ubuntu and did a fresh installation (wubi and in the same D drive). Reboot. Install and copy files 100% and then a blank screen again with the dreaded cursor blinking. I still wait for about 10 mins and nothing yet happens. So I manually shut it down (again) and then load ubuntu and unsurprisingly i have the same problem as what i described before....doesnt load properly and i'm not able to come out of the terminal.
View 2 Replies
View Related
Jun 29, 2011
I have just installed Fedora 15. I have tried both the desktop edition and the LXDE Spin on an AMD X2 64 5800+. It's hard-drive so I select "Use All Space", meaning all the partitions will be removed and recreated. The installation completes normally, when I reboot without the CD, I get the screen with blinking cursor same as [URL]... Adding intel_iommu=off to the grub.conf did not help. I presume the default installer works correctly however the installed boot configuration puzzles me. The boot partition is /dev/sda1 and the mount point is /boot. If boot from the cd after the installation, I mount:
[code]...
Is this how it should be? This is me being new to Linux probably, but I should /boot contain the boot information if that's where the boot partition is mounted? Is there any way to "turn on debugging" so I can get a better insight on what's not happening?
View 2 Replies
View Related
Feb 5, 2010
I was going to set up an ubuntu server, but ran into some issues. When I try to install ubuntu server 9.10, it immediately goes to a black screen with a blinking cursor as soon as I press enter on the menu. I've tried pressing F6 and editing options - noapic, nolapic, irqpoll, vga=[something...] and nothing worked. I then downloaded a standard ubuntu desktop cd, and the livecd works, and I can successfully start the install!
I've heard that I should probably use the server install if I want to use this as a server (which I do; webserver for a group of people, website, ftp, ssh.) I've also heard that it's possible to just install everything needed overtop of an ubuntu desktop base. What should I do? Are there other things I should try to make the server install work? Or is it not worth the effort, and I should just go with a desktop install and then work from there? tasksel? (It's a Dell XPS, the graphics card is NVIDIA Geforce 9800 GT).
View 1 Replies
View Related
May 25, 2010
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
View 2 Replies
View Related
