Ubuntu :: Installation Failure - CD Ejects During Initial Reboot Resulting In "dumb" Screen
Feb 18, 2011
My computer is a Compaq Presario 2110CA. When installing Ubuntu 10.10, after the installation is complete, I select the option to reboot. During the shutdown procedure, the CD drive ejects the installation CD. I/O error messages fill the screen. This isn't what troubles me, since this issue is taken up in other posts and forums. When I press Enter, the laptop reboots as it's supposed to.
Once Ubuntu reboots, it prompts me for login information. After entering my username and password, it plays the startup sound, gives one warning pop-up about the health of my battery, and then the screen stays on the default background only. There are no mini-indicators for wireless connectivity or shutdown/suspend options - just the background. The cursor shows up, too.
I have tried to install gnome-core from the console. I have also tried to make clean, fresh DVD copies of the installation .iso. Each time, because of the CD ejecting during the initial reboot, I arrive at a blank desktop background. What is the best way to properly complete the installation so I can begin enjoying Ubuntu?
I'm trying to install the latest release of Ubuntu from the official site, 10.10.
I downloaded the 64-bit edition first to install. After burning it to a CD, it launches in my PC just fine and lets me go through the install process. I'm letting Ubuntu use up the whole HDD, so no special options are being chosen during the install. At the end of the installation, it asks me to restart and I hit OK, it closes out of the box and leaves me looking at the default background... forever.
Thinking I did something wrong, I tried again, but this time left the box to download updates and install 3-rd party software unchecked. Same thing as above, it appeared to install just fine but hung after I tell it to reboot.
Lastly, I downloaded the 32 bit edition to try, and it gives me the same error.
If I hard restart my machine after waiting on the background image for a while, it will not boot when it comes back up. My PC just remains at a screen after the BIOS acting like it's searching for bootable media.
I'll be honest that I haven't waited for over 15 minutes for it to restart. But should it really take that long?
Ubuntu 10.04 installed like a charm (I only need to find out why the headphones work but the main speakers do not), but at the end when the procedure ejected the CD, I immediately got:
I/O Error on Device sr0
repeated over and over for a couple dozen blocks.
I did a hard reset and the system is acting normally, but I'm wondering if other people have had the same problems?
Also, when running glxgears, is a score of 3000 normal for the Intel GMA HD video chipset?
I am trying to install Lucid on my Alienware M17x laptop.I loaded the install to my thumb drive and boot to my thumb drive but after the initial option screen, I see nothing. If I choose to run Ubuntu from the thumb drive, the screen goes blank and after a few seconds I hear the sound, but no Ubuntu on my screen.Am I missing some unspoken prep steps?
--My System------------------------------------------------------------------------------------ Processor(s)Processor- 1CPU_Name- Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz
Has anyone managed to do a dual boot with W2K and a linux system without a resulting blue screen of death on the Windows partition? What I mean is only W2K and Linux, not one with XP. I think there is a difference in the bootloaders of XP and W2K.
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
Last night I created a fresh install of Ubuntu Server 10.10. I was working through a tutorial to set up a development server for home use, and everything worked perfectly. I was able to install OpenSSH, Apache, MySQL, and PHP (and Vim) with no problems. I was also able to use "ifconfig" to determine the network address of the server and I was able to view web pages on the server from another machine on my home network, using a browser. So, everything was "peachy". [By the way: The server is connected to the router using a CAT5 cable. This is a WIRED connection] I shut the Ubuntu server down at the end of the night and, now that I have rebooted this morning, I have apparently lost the network interface. I cannot ping anything from the server. If I run ifconfig, only the "lo" configuration is listed, with the 127.0.0.1 address.
i have a dell inspiron laptop lap top with windows7 os.my hardisk is 320gb capacity.now i want to install fedora as my secondary os. I tried fedora12 but instaltion terminated abnormally with the message safe reboot needed recievied signal 3. i have 20 gb unallocated space in my disk.
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
I'm trying to install ubuntu alongside Windows 7 on a HP Pavilion DV3. When I reboot I'm given the option to either boot into windows or ubuntu (this is after running the wubi program from the ubuntu website); when I select ubuntu it says that the installation will continue but the screen then goes very dark like the brightness has been turned right down. In the center of the screen I can faintly see the word ubuntu. I've tried using the hot-keys on the laptop to turn the brightness up but this doesn't work. I've also tried installing from CD but his doesn't work either and I get the same problem. This is my first time installing ubuntu so I'm not familiar with how the installation process works. Also if any other details are needed I'll be happy to give them.
Compaq Laptop Celeron Processor 2 megs ram and 1.4gig clock Downloades and burned umu 10.4 desktop i386
At boot it goes to a purple screen with Ubuntu and five dots changing from white to red. After while it went to a blank screen and would not come out with ctrlA;tF1 or ctrl alt Backspace. had to power cycle to get out.
Had an old Ubuntu 6.10 ISO from a while back and it boots nicely. How to get the ubuntu 10.4 Demo up and running?
I just installed Ubuntu on the second partition of my hard drive. I have Windows 7 installed on the first partition. My problem is is that when I rebooted after a successful OS installation and apparent grub install, it went straight to boot up Windows 7. There's probably a simple way to get the grub menu to appear that I'm unaware of, right?
I am able to get fglrx driver to work with 10.10, but as soon as I change my displays settings to have my good old dual screen setup, I get a blank screen when I reboot the system.
I have Lucid running on a Toshiba Portg R500. Last week it started hanging for just over one minute at the initial Toshiba screen. That is, the screen with the Toshiba logo and a series of boot-from options (HDD, CD, Network, USB) along the bottom. I don't know if the machine is even interacting with the OS at this stage. Also, neither Ubuntu nor the machine recognises the CD-ROM tray any longer. As in, I can't boot from CD and I also can't mount a CD when in Ubuntu. I can, however, boot from a USB startup disk (after the one minute delay).
I'm not sure how to collect helpful data on this sort of issue, especially since I can't see any threads that point to similar problems. The only strange thing I did the day this problem started was to forget to unmount a truecrypt-encrypted USB key before shutting the laptop off.
I've reinstalled Lucid but to no avail. I assume that whatever problem I have is a BIOS problem (and so strictly not for here)? As you can imagine though I want to make sure I've accounted for all other possibilities before fooling around with the BIOS.
My laptop recently died and I have invested in a new desktop. The specs are as follows code...
Anyhow, I had been running 10.10 on that laptop. Everything ran swimmingly (until the internal components died of course). I am currently running XP on the desktop and am looking to run 10.10 again as a dual boot. I already partitioned off 200gigs for Ubuntu upon set up of XP. I have tried using the USB LiveCD I used for my first install on the laptop, as well as a LiveCD CD I had created for the laptop. Neither one worked. The LiveCD came up with an error and the USB got to the point where there was the purple screen with white dots and it never got past that point.
I downloaded a brand new 10.10 disc earlier today and I got to the point where the white line blinks on the black screen. Unfortunately that is as far as the boot got. It has some initial writing at the top of the screen saying it was loading a process, and then it produced an error of a int file of some sort. I'll go back and try it again and get a better grasp on the error. Also, after the error message I was given the ability to type commands (it actually told me to type 'help' for a list of the commands available to me), but I had no clue what to do with them.
I had ubuntu running just fine on another computer, but had to move things around to make Windows7 run better. So after backing up Home, I switched hard drives, pulled the video card, and adjusted RAM, I tried booting up. The computer found all the changes and did its thing. But then it hung with a blank screen. I figured that it didn't recongnize the video driver for this computer, or something, so I did a fresh install with 9.10 to start over from scratch. The boot up went great, and finished completely. I made a few changes to the desktop, and loaded in my archived firefox bookmarks and evolution files. After rebooting, the first ubuntu logo came up, but then the blank screen, with no drum sounds. I tried a few more times rebooting and hitting esc, but I don't know what I am doing at that menu. I also tried the F1 option, but again, I don't know anything. One other time I was able to boot into ubuntu all the way when I was hitting esc slowing (waiting) and somehow was able to get the login and the desktop just fine. I haven't been able to get that to happen again.
Can someone walk me through the steps to troubleshoot this? I don't know any terminal jargon or commands, and haven't really got a clue, but I really want to learn and figure this out. I don't even know how to go in from the command line to see what my system specs or video specs are to tell you.
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
I've been running Ubuntu Maverick as a fresh install since release, and for the last 2 days, I'm having to log in twice! This is only on a locked screen, not on reboot or switch users. After the first login, I see the desktop for a second, then the screen goes blank. I wiggle the mouse and the login screen is there again. The 2nd login goes as normal.
I have gradually been installing things as I need them over the week since install, but I can't pin it down to any of those. It's getting pretty annoying when the screen saver kicks in!
Using Ubuntu and any Linux OS. I installed Ubuntu using the Wubi installer. Everything went fine. When the install wizard completed and asked to Reboot Now, I did. When my computer rebooted, the Windows Boot Manager doesn't appear and it goes straight to Windows.
I'm using 32 bit Vista and have an AMD Athlon X2 Dual Core Processor 5000+. When using Wubi, the download defaults to the AMD 64 version and that is what I have installed.
I tried to update my main computer from Ubuntu 10.0 to 11.04. I wish I could remember what it said, but it crashed during the update. The lights on the keyboard were flashing on and off as well. When I try to boot, all I get is a black screen and flashing lights. The Ubuntu recover also has the same thing. I am going to try a fresh install. For some reason I am leaning to the power manager, but I am no where near sure.
I have problem with my Debian. Sometimes after reboot I can see only mouse cursor (moveable) and black screen with command prompt in top -left corner. I don't know how to fix it...
Code: Select allroot@debian:/home/rafal# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.1 (jessie) Release: 8.1 Codename: jessie
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
I installed fedora core 11 on a dell inspiron laptop which has windows vista already installed on it. It shows that fedora is installed successfully and to reboot the system. When i reboot the system there is no grub screen and it directly boots windows.
I installed fedora core 11 on my laptop (dell inspiron 1525), which has windows vista already installed on it. After installation it says that the installation is complete and please reboot the system. When I reboot it is directly booting into windows. The os selection screen is not shown.
Dual boot installed Redhat enterprise linux 5 with windows 7 on a 64b machine. On reboot after loading some files the GUI doesnot show only a black screen and nothing happens.
The wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
i have installed ubuntu 9.10 on my hp nx6325 notebook, and everything was working just fine, then it updated and problem started coming up. First the computer wouldn't reboot after the update, blank screen, then i manually reboted and now some programs don't work (ubuntu software center, update maneger, avant window navigator)
i assume the update did some damage, so how can i repair this, is there a recovery tool or something.
who installed nvidia drivers on Ubuntu 10.04 and gets a terminal screen on reboot with no GUI.I came across this fix trying to install the drivers on Ubuntu 10.10. later i find that the same thing happens to me on 10.04 but one of the fixes i came across works perfect with it. Ok, so you just installed ubuntu 10.04 updated it through update manager and installed your nvidia drivers but when you rebooted and tried to log on you find yourself in a terminal interface well i found an easy fix for that.
i hope it works for you not saying it will though im new to the linux world only just coming out of windows and i dont know much anyways just log on the terminal and use command "sudo dpkg-reconfigure xserver-xorg" then run nvidia-xconfig command reboot and you should be fine only wish this would work for ubuntu 10.10
