Ubuntu Installation :: Error: Out Of Disk. Grub Rescue>
Dec 11, 2010
Trying to do a new install of ubuntu 10.10 to my laptop. Installation and all works fine, but upon rebooting, after the bios screen i get:
Code:
error: out of disk.
grub rescue>
I tried using following some instructions i found after googling for the problem:
Code:
ls (displays the partitions and devices Grub can see)
set prefix=(hdX,Y)/boot/grub
[Code]...
but after the 5th step, i get another "error: out of disk" message. The odd thing is that I had an install of 10.10 on this laptop a month ago, and it worked fine. As a side note, I installed fedora 14 after this happened, which worked fine. Reinstalled ubuntu, and it was back to the same problem. I also tried installing with a kubuntu cd I had, to make sure it wasnt the install media, and had the same problem.
View 2 Replies
ADVERTISEMENT
Mar 9, 2010
i get this error when i try to boot from harddrive:
grub loading error: no such disk grub rescue>_
View 9 Replies
View Related
Feb 11, 2010
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
View 4 Replies
View Related
Jul 13, 2011
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
View 3 Replies
View Related
May 11, 2011
error: unknown filesystem grub rescue>
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
View 10 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Feb 20, 2010
I accidently deleted my ubuntu partition, and when boot I get this message:GRUB loading.error:unknown filesystemgrub rescue>I can't get into my bios options either... I just see the MSI splash screen and it cuts right to this error message.
View 4 Replies
View Related
Sep 19, 2014
I am running a 14 disk RAID 6 on mdadm behind 2 LSI SAS2008's in JBOD mode (no HW raid) on Debian 7 in BIOS legacy mode.
Grub2 is dropping to a rescue shell complaining that "no such device" exists for "mduuid/b1c40379914e5d18dddb893b4dc5a28f".
Output from mdadm:
Code: Select all # mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Wed Nov 7 17:06:02 2012
Raid Level : raid6
Array Size : 35160446976 (33531.62 GiB 36004.30 GB)
Used Dev Size : 2930037248 (2794.30 GiB 3000.36 GB)
Raid Devices : 14
[Code] ....
Output from blkid:
Code: Select all # blkid
/dev/md0: UUID="2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb" TYPE="xfs"
/dev/md/0: UUID="2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb" TYPE="xfs"
/dev/sdd2: UUID="b1c40379-914e-5d18-dddb-893b4dc5a28f" UUID_SUB="09a00673-c9c1-dc15-b792-f0226016a8a6" LABEL="media:0" TYPE="linux_raid_member"
[Code] ....
The UUID for md0 is `2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb` so I do not understand why grub insists on looking for `b1c40379914e5d18dddb893b4dc5a28f`.
**Here is the output from `bootinfoscript` 0.61. This contains alot of detailed information, and I couldn't find anything wrong with any of it: [URL] .....
During the grub rescue an `ls` shows the member disks and also shows `(md/0)` but if I try an `ls (md/0)` I get an unknown disk error. Trying an `ls` on any member device results in unknown filesystem. The filesystem on the md0 is XFS, and I assume the unknown filesystem is normal if its trying to read an individual disk instead of md0.
I have come close to losing my mind over this, I've tried uninstalling and reinstalling grub numerous times, `update-initramfs -u -k all` numerous times, `update-grub` numerous times, `grub-install` numerous times to all member disks without error, etc.
I even tried manually editing `grub.cfg` to replace all instances of `mduuid/b1c40379914e5d18dddb893b4dc5a28f` with `(md/0)` and then re-install grub, but the exact same error of no such device mduuid/b1c40379914e5d18dddb893b4dc5a28f still happened.
[URL] ....
One thing I noticed is it is only showing half the disks. I am not sure if this matters or is important or not, but one theory would be because there are two LSI cards physically in the machine.
This last screenshot was shown after I specifically altered grub.cfg to replace all instances of `mduuid/b1c40379914e5d18dddb893b4dc5a28f` with `mduuid/2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb` and then re-ran grub-install on all member drives. Where it is getting this old b1c* address I have no clue.
I even tried installing a SATA drive on /dev/sda, outside of the array, and installing grub on it and booting from it. Still, same identical error.
View 14 Replies
View Related
Apr 15, 2010
I just installed Ubuntu 10.4 beta. The installation is fine, but grub2 isn't loading Linux. Instead of booting into the OS, I get the message: No such disk grub rescue >I have two hard drives: /dev/sda and /dev/sdb. Ubuntu is the only OS and is located on /dev/sda1. I ran the "boot info" script and include the results here. One problem I see is that I have grub2 on the MDRs of both /dev/sda and /dev/sdb. BTW: From the Live CD, I can select boot into hard drive and Ubuntu will start up just fine. I can also use "Super Grub" CD and everything loads fine.
View 7 Replies
View Related
Mar 21, 2010
I have tried to upgrade to 10.4 LTS it crashed I use dual booting whenever I try to start the computer it goes in to grub rescue > I have used wubi to install the dul booting, now I can not get into my window nor ubuntu. what can I do ?
View 2 Replies
View Related
Mar 29, 2011
I just installed Ubuntu on a separate hard drive alongside Vista, and after restarting, my computer booted to a screen that said, "error: no such device: xxxxx-xxxx-xxxxx-xxxx (I don't remember exact number, if I need them I'll go back and write em down) grub rescue>"
After a bit of searching I found this thread: [URL].. I tried the first part twice which didn't change anything, so I tried the last part which was too fix the vista bootloader, which worked perfectly, and now I can get into at least one operating system. Would anyone please help me get a bootloader working so I can choose between Ubuntu and Vista? Also, is it worth mentioning that right before the computer shut down after installation, I had a huge list of I/O errors?
EDIT: After further searching I read that the I/O errors were commonly because of a faulty cd or it was spinning too fast. I think my problem with that was that it was spinning too fast, it was incredible loud and there was a huge amount of wind coming out of my computer XD. iirc I have to go to the BIOS to change disc speed?
EDIT2: I think all my problems stem from a faulty CD. I remember setting the burning speed too the highest setting when I burnt the live CD, I guess I thought faster was better.
View 9 Replies
View Related
Mar 31, 2011
i just installed ubuntu 10.10 x64 on my computer and removed the windows 7 partition and installed it on that one it installed as usual now as i booted it give me the following error
Code:
error:no such partition grub rescue> i tried one or too methods given to restore grub but it isnt working wht can be done ?
View 2 Replies
View Related
Aug 16, 2011
I installed ubuntu 11.04 on a usb hard drive which I created a 100 gig partition however when i try to boot from the usb drive I get the message error:no such partition grub rescue> when I boot from live dvd I can see the partition I created with all the files on it.
View 1 Replies
View Related
Apr 10, 2010
I have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
View 2 Replies
View Related
Aug 2, 2010
After lots of searching last night I noticed that over the last couple of days there have been quite a few posts of people receiving the error: no such device lots of numbers grub rescue>. I have a dual boot vista/ubuntu setup with ubuntu on my d: drive and windows on my c: drive and it happened to me last night. So after my freaking out when I received the grub rescue> error after updating somethings in my ubuntu install and restarting. Once the computer rebooted bam! error. after much freaking it only fixed itself by reinstalling the windows bootloader via the vista rescue disk I was wondering if there was a way to prevent this from happening again? will ubuntu attempt to "update" itself again?
View 5 Replies
View Related
May 19, 2010
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
View 3 Replies
View Related
Apr 9, 2011
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
View 6 Replies
View Related
Jun 7, 2010
I was messing around with the partitions and accidentally y deleted the ubuntu partition! I have Windows 7 as a dual boot but I can't access to that OS anymore. The message that I get is: error: no such partition. grub rescue>
View 5 Replies
View Related
Jan 9, 2011
I tried to install Ubuntu 10.10 and now I'm getting a "grub rescue>" when I reboot. I just want to get back my Windows now.
View 9 Replies
View Related
May 13, 2011
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 1 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Jan 18, 2011
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
View 14 Replies
View Related
Jul 6, 2010
I already had windows 7 installed on my raid. So I figured that I would install Ubuntu on my 250gb external. I burn it, boot to CD, and tell it to wipe and install the external hdd. After installation it prompts me to take out the CD, then press enter for it to restart. It restarts, gets all the way through and then says:
Error: no such device: f8b79a59-3c13-408a-b332-dd5e9dc37729. Grub rescue>
I am unfamiliar with this issue, and would have looked for a fix on my windows side, but now I am unable to boot into my windows side at all.
View 6 Replies
View Related
Dec 26, 2010
Have installed ubuntu on a separate partition on single hard disk and system initially worked on a dual boot basis with windows xp. However after installing most recent series of updates computer is failing to boot.
Error message is 'error : no such device : 6937cabe-f115-455b-a248-6f8d46f80682.' prompt showing is 'grub rescue>' am now unable to access either windows or ubuntu.
View 3 Replies
View Related
Dec 2, 2010
I'm a complete newbie, trying to get away from Windows Vista! I had some issues installing Ubuntu, but finally got it sorted - so I thought. I wanted to view a dnl file, so tried to boot into Windows, and I got a white screen with big red letters saying "ERROR". So I held down the off button for 5 seconds, and then tried to reboot. But now all I get is the words:
error: no such partition
grub rescue>
Before I go further, I'll summarise the problem with my install. Basically it would only get partway through, if at all, and then all the options would freeze...I could move the mouse, but that was it. Similarly with running Ubuntu on the LiveCD. After a lot of hassle, and some helpful members of the community, it turned out that all I needed to do was use the option "nomodest" when installing, and it all went fine. Well actually I had to retry it again in recovery mode because I think maybe a driver wasn't loaded (?), but after that everything seemed alright. So as mentioned before, I've come to my present issue. Typing "Is" gives "Unknown command" (or maybe "invalid"...I can't remember). And if I type "set" I get something like "prefix=..." and something else...sorry I can't remember and I don't want to turn off the computer now just in case things don't work again.
Anyway I managed to boot and run Ubuntu using the LiveCD, and started looking for solutions. Note that I used the "nomodest" option again to boot. Anyway all the solutions involve first using "fdisk -l" to find the partitions. Here is the output:
[Code]....
View 7 Replies
View Related
May 16, 2011
I was dual-booting Ubuntu 11.04 just fine for about the last week but then ran into some issues and decided to reinstall Ubuntu. Now after the install I get this error: error: nu such device: d38af2a9-740e-4d3c-b267-2a3848e5d319 and it goes into the grub rescue command prompt screen. I have tried to reinstall Ubuntu about 6 times now, complete installs. I have tried changing boot priority multiple times. I installed off a thumb drive and left the thumb drive in after install, took it out after install.
View 9 Replies
View Related
Sep 1, 2011
I had Ubuntu and Kubuntu installed to dual-boot using the GRUB loader installed by Kubuntu. I mistakenly formatted the Kununtu partition to NTFS in an attempt to install Windows XP in its place without updating grub to pull the files from my Ubuntu partition.
Now, when I go to boot the computer, I receive a the "error: unknown filesystem" and the grub rescue prompts for commands. I've attempted to boot from both a Ubuntu Live CD and a Secured Ubuntu CD with boot repair built into it, but receive the same message both times. I know this isn't an issue with my boot order (I've changed that), and my computer will boot into a Windows XP setup disc (which will not proceed for a different reason)
View 1 Replies
View Related
May 21, 2011
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
View 29 Replies
View Related
Dec 22, 2009
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
View 2 Replies
View Related
May 11, 2010
Firstly, I'm ubuntu-naive so things may need to be explained painfully slowly. Secondly, I tried doing a search for similar problems but I had a hard time following the solutions so rather than just jump on another thread I figure i'd start a new one.I am trying to move on from XP and tried setting up 9.10. I did the LiveCD; followed the installtion prompts and installed, and restarted. Following restart I get the following;GRUB loading.error: no such diskgrub rescue>I've tried doing the boot info script lines but I keep getting "unknown command sudo" msgs.I can't get beyond this point.
View 3 Replies
View Related
