I installed ubuntu 11.04 on a usb hard drive which I created a 100 gig partition however when i try to boot from the usb drive I get the message error:no such partition grub rescue> when I boot from live dvd I can see the partition I created with all the files on it.
View 1 Replies
i just installed ubuntu 10.10 x64 on my computer and removed the windows 7 partition and installed it on that one it installed as usual now as i booted it give me the following error
Code:
error:no such partition grub rescue> i tried one or too methods given to restore grub but it isnt working wht can be done ?
I was messing around with the partitions and accidentally y deleted the ubuntu partition! I have Windows 7 as a dual boot but I can't access to that OS anymore. The message that I get is: error: no such partition. grub rescue>
View 5 Replies View RelatedI'm a complete newbie, trying to get away from Windows Vista! I had some issues installing Ubuntu, but finally got it sorted - so I thought. I wanted to view a dnl file, so tried to boot into Windows, and I got a white screen with big red letters saying "ERROR". So I held down the off button for 5 seconds, and then tried to reboot. But now all I get is the words:
error: no such partition
grub rescue>
Before I go further, I'll summarise the problem with my install. Basically it would only get partway through, if at all, and then all the options would freeze...I could move the mouse, but that was it. Similarly with running Ubuntu on the LiveCD. After a lot of hassle, and some helpful members of the community, it turned out that all I needed to do was use the option "nomodest" when installing, and it all went fine. Well actually I had to retry it again in recovery mode because I think maybe a driver wasn't loaded (?), but after that everything seemed alright. So as mentioned before, I've come to my present issue. Typing "Is" gives "Unknown command" (or maybe "invalid"...I can't remember). And if I type "set" I get something like "prefix=..." and something else...sorry I can't remember and I don't want to turn off the computer now just in case things don't work again.
Anyway I managed to boot and run Ubuntu using the LiveCD, and started looking for solutions. Note that I used the "nomodest" option again to boot. Anyway all the solutions involve first using "fdisk -l" to find the partitions. Here is the output:
[Code]....
I know this is a common error, but my situation is a little different than previous threads on this issue and I just want to make sure I get the correct solution.
Basically, I had Ubuntu 10.04 and Windows 7 on my netbook and wanted to try a more lightweight version of Ubuntu. After settling on LXDE for a desktop, I decided to install Lubuntu 10.04. I chose not to install LXDE over regular Ubuntu because I wanted to eventually end up with an Ubuntu distro with either GNOME or LXDE, but not both. So rather than put myself through the hassle of uninstalling all the GNOME or LXDE packages, I decided to keep them each on separate partitions.
In the end I decided to just stick with regular Ubuntu and deleted the Lubuntu partitions. Now I get the GRUB error written in the title of this thread.
then my computer starts black window opens error: no such partition grub rescue>
[Code]....
I had 3 partitions on my hard dive, Windows 7, Ubuntu, and just junk on the other. I installed Ubuntu in a way where it went to the GRUB filesystem? first, where it ask me to start in linux kernel 2.38.6 (can't really remember the kernel exact name) which was ubuntu, some other options, recovery mode, and at the very bottom was the one to go to Windows 7. I was in Windows and I wanted to get rid of my junk partition but I formatted the Ubuntu partition by mistake.
Now when it boots up it saying:
Error: unknown filesystem. grub rescue>
I hope there is a way to save my files on Windows. I tried to reinstall Windows 7 back on my computer but it wouldn't go through since the grub startup thing is the main one, not the windows one.
I have a netbook that dual-boots Win XP and Ubuntu 10.04 and accidentally hit the Win recovery mode in GRUB today, but quickly restarted without formatting or proceeding with any recovery. But upon reboot I just see: error: no such partition. grub rescue>
What I have tried so far: Boot to USB Live Disk... It won't, just goes straight to grub rescue.I do ls and it gives me (hd0) (hd0,4) (hd0,3) (hd0,2) (hd0,1) (fd0) error: fd0 cannot get C/H/S values.
set gives me
prefix=(hd0,5)/boot/grub
root=hd0,5
but if I try to boot it says unknown command so I figured I needed to find the right partition to boot from but I went through all of them with ls (hd0,4)/boot, ls (hd0,3)/boot etc. and every partition comes back "unknown filesystem".
in windows 7 i extended the partitioning to remove ubuntu but now when i try to log on i get an error and the grub rescue shows up
View 3 Replies View RelatedI recently partitioned my hard drive so that I could have Linux in addition to Windows Seven on my laptop. For some reason, at boot it it showed not only Linux, a Recovery mode for Linux, and a Windows 7 OS, but also a Windows Vista OS that I never installed. Yesterday, A friend of mine borrowed my computer and chose to open Vista. Since then my computer has been stuck at the grub rescue screen with nothing other than the message: error: no such partition grub rescue>
View 9 Replies View RelatedI am to reinstall the notebook of my father, that had Windows XP and Ubuntu on it. And I dont know anything on Ubuntu. My objective was to make a fresh install with XP only.So I was checking the partitions within Windows and found 7 or 8 of them which I could not understand: I asked to remove them, one by one, and got some error mesage on Windows. Now I understand these were probably used by Ubuntu.Now, when I restarted the PC,n I got:"error no such partition grub rescue"..I tried to boot from the CD - a windows XP setup CD, but I get blocked as well, because when I try formatting the drive during the installation CD it makes an error, or otherwise without formatting I also get an error.I guess the partitionning information of the hard drive is inconsistent, making everything fail.I dont know what to do.I am thinking to use a USB disk to reformat the HD, but I am not sure it will help.
View 5 Replies View RelatedJust delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I have ubuntu in sda7. sda6 had bt4, sda3 had Win7. From Win7 I removed sda6. Now when I start my computer I get grub rescue. How can I tell grub that ubuntu in sda6 and not in sda7 anymore or how can I create sda6 again so ubuntu goes sda7.
View 1 Replies View RelatedI am new to ubuntu OS, I am having quiet a hard time solving out certain problems. I have Ubuntu 10.10 and Win Xp installed on the same hard drive partition i.e. C drive. Now yesterday accidentally I deleted a folder from C while I was logged in to Windows. Now today when I restarted my pc I got this error message :
error : No partition found
grub rescue>
Then somehow I managed to reinstall the Grub loader. Now whenever I restart my PC I get this error message :
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub>
I set up my Dell Inspiron Laptop as Dual Boot -> Xp / Ubuntu 10.04. - all worked well. I had 2 installations of XP on this machine and I removed one - all worked well. I then went into XP and deleted the partion (4) that the old XP had resided on (using Easeus Partition Master) All NOT working well !! Now when booting the machine I get grub rescue> I did ls and got ....
[Code]...
i get this error when i try to boot from harddrive:
grub loading error: no such disk grub rescue>_
I have tried to upgrade to 10.4 LTS it crashed I use dual booting whenever I try to start the computer it goes in to grub rescue > I have used wubi to install the dul booting, now I can not get into my window nor ubuntu. what can I do ?
View 2 Replies View RelatedTrying to do a new install of ubuntu 10.10 to my laptop. Installation and all works fine, but upon rebooting, after the bios screen i get:
Code:
error: out of disk.
grub rescue>
I tried using following some instructions i found after googling for the problem:
Code:
ls (displays the partitions and devices Grub can see)
set prefix=(hdX,Y)/boot/grub
[Code]...
but after the 5th step, i get another "error: out of disk" message. The odd thing is that I had an install of 10.10 on this laptop a month ago, and it worked fine. As a side note, I installed fedora 14 after this happened, which worked fine. Reinstalled ubuntu, and it was back to the same problem. I also tried installing with a kubuntu cd I had, to make sure it wasnt the install media, and had the same problem.
I just installed Ubuntu on a separate hard drive alongside Vista, and after restarting, my computer booted to a screen that said, "error: no such device: xxxxx-xxxx-xxxxx-xxxx (I don't remember exact number, if I need them I'll go back and write em down) grub rescue>"
After a bit of searching I found this thread: [URL].. I tried the first part twice which didn't change anything, so I tried the last part which was too fix the vista bootloader, which worked perfectly, and now I can get into at least one operating system. Would anyone please help me get a bootloader working so I can choose between Ubuntu and Vista? Also, is it worth mentioning that right before the computer shut down after installation, I had a huge list of I/O errors?
EDIT: After further searching I read that the I/O errors were commonly because of a faulty cd or it was spinning too fast. I think my problem with that was that it was spinning too fast, it was incredible loud and there was a huge amount of wind coming out of my computer XD. iirc I have to go to the BIOS to change disc speed?
EDIT2: I think all my problems stem from a faulty CD. I remember setting the burning speed too the highest setting when I burnt the live CD, I guess I thought faster was better.
I dual booted ubuntu with vista a while back, but I was running out of space on both partitions. So I thought I'd install ubuntu on another slightly smaller HDD from an old laptop. I thought all the ubuntu and grub stuff were on that one partition, so I thought if I just deleted it, all would be good. I isn't. Now when I boot up, I get a message saying 'Error, no such partition exists' and then 'Grub rescue:' and an input. So what I want now, is well, basically to be able to boot windows. I'm guessing I either have to remove grub, or just make it forget I ever had Ubuntu.
View 6 Replies View RelatedI have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
After lots of searching last night I noticed that over the last couple of days there have been quite a few posts of people receiving the error: no such device lots of numbers grub rescue>. I have a dual boot vista/ubuntu setup with ubuntu on my d: drive and windows on my c: drive and it happened to me last night. So after my freaking out when I received the grub rescue> error after updating somethings in my ubuntu install and restarting. Once the computer rebooted bam! error. after much freaking it only fixed itself by reinstalling the windows bootloader via the vista rescue disk I was wondering if there was a way to prevent this from happening again? will ubuntu attempt to "update" itself again?
View 5 Replies View RelatedI just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
I tried to install Ubuntu 10.10 and now I'm getting a "grub rescue>" when I reboot. I just want to get back my Windows now.
View 9 Replies View RelatedI am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
