Ubuntu Installation :: Don't Show ATI Drivers When Trying Commands Glxinfo
Nov 29, 2010
I have an ATI Mobility Radeon x1800 graphic card and I am trying to install it to Ubuntu 10.10. I managed to install Ubuntu with nomodeset but the resolution was very bad and that's why I am trying to install the ATI drivers. I have deleted the xorg.conf file, installed the ati drivers through package manager and changed nomodeset to radeon.modeset=1 but when I am trying the commands glxinfo | grep render and glxinfo | grep vendor they don't shown the ATI drivers and the resolution is still bad. Does anyone what to do?
I am providing the results for the 2 commands above.
[code]...
View 2 Replies
ADVERTISEMENT
Jan 6, 2010
I was wondering if there was a way to show all current actions I am doing in a terminal window? For example if I left a terminal window open on one of my desktops, could I make it display everything I am doing so that when I receive some general error in a program, I could jump over and get some more details. I could also use it to see what commands are actually run when I do certain things.
View 1 Replies
View Related
Apr 20, 2011
I mean, obviously I can just type them out and italicize them or something equally boring, but what I'd like to do is make the code look like it does on these forums.Code:sudo apt-get install html-knowledgeI've been Googling like a mad man (not a euphemism) for the better part of an hour and can't turn up any pertinent results. I thought maybe somebody here could point me in the right direction. I'm tired of my blog posts looking ugly and disorganized when I start typing commands.
View 2 Replies
View Related
Apr 5, 2011
Distro: Ubuntu 11.04-beta1 'natty'
Problem: 'your hardware does not support Unity; you will be using Ubuntu Classic.'
Installed: nvidia-common 0.2.28,
nvidia-current 270.30-0ubuntu3,
nvidia-settings 270.29-0ubuntu1,
linux-image-generic-pae 2.6.38.7.21,
linux-headers-generic-pae 2.6.38.8.22
[Code]....
After reading a few other threads on the matter, I suspect the problem is with the 'nvidia-current' package more than the libgl1-mesa-glx or unity packages. ... though it does seem odd that Unity doesn't have a non-OpenGL verison.
If I find a solution, I'll come back. I hope the answer isn't "ditch nvidia-current for the binary install script from nVidia direct." If someone found this thread in a search, the nVidia driver install scripts can be found at [URL]
View 6 Replies
View Related
Feb 23, 2010
I'm just installed ns 2.31 in my cumputer:fedora 12 (this is the first time working with ns2 and fedora) but I don't know commands to run an example of tcl script and show the graph in my screen.
View 9 Replies
View Related
Oct 8, 2009
I'm trying to learn Linux by myself and i have a list of projects. for this project i have to use the grep command to show all failed login's attempts in my machine.
I believe the attempts are saved at /var/share/messages.log but i cannot figure it out.
View 1 Replies
View Related
Jul 10, 2011
While trying to make a Winmodem work, I've installed drivers, done magic incantations in Terminal, etc., without keeping complete records of what I did. Is there a "clean" routine or something that will remove unused drivers, or do a system rollback, or some other way to clean up the mess?
View 2 Replies
View Related
Jun 12, 2011
I long while ago (when I was in collage) I used VIM a bit. I have not used it since and would like to get back into using it. I remember there being a way to split the screen within VIM to show common commands on the bottom portion of the screen. I've searched a while and cannot find how to set this up.
View 1 Replies
View Related
Nov 17, 2009
I'm using openSUSE 11.1 and i have problems using the USB webcam.
First of all i do not know the commands to check whether the device is detected or not. My webcam is iBall c12.0 and is USB video compilant.
The Cheese software says 'no camera found'.
Please inform about what commands to use and what softwares/drivers to use.
View 3 Replies
View Related
May 2, 2010
I just upgraded to lynx but my nvidia drivers only say "173" and "recommended" as the two options. no idea which version the "recommended" one is but that's what is enabled. I did an update but still it does not show the 195 drivers that I thought I read were shipping with lucid.
View 3 Replies
View Related
Nov 20, 2009
I just upgraded from 11 to 12 and then installed the Nvidia proprietary drivers from RPMFusion. Initially glxinfo wouldn't work because SELinux was stopping it from using an executable stack. Since the Nvidia drivers are proprietary and a fix may not be provided, I allowed this access to glxinfo with chcon -t execmem_exec_t '/usr/bin/glxinfo'
However it looks like every program using glx-utils also needs these permissions - so far I allowed Xorg, compiz and the Firefox video plugin to execstack. Can anyone suggest a fix for this - preferably one that avoids execstack for all those apps since its a security risk. If not how do I create an SELinux policy to automatically grant apps execstack while they use glxinfo or other nVidia libraries but not at other times.
View 2 Replies
View Related
Feb 25, 2011
Ok I am a total linux noob, and I was looking through threads and couldn't easily find what I am looking for. I am using a HP Mini 1010nr with broadcom bcm4312 wireless card. I went online and downloaded the drivers onto a USB drive from the broadcom website. All I need to know is what are the commands or the programs I use to install the 32 bit drivers I downloaded?? Sorry I know the answer is in here somewhere but I don't understand what the command is on how to install my drivers from my thumb drive.
View 5 Replies
View Related
May 5, 2010
How do I get my X300 ATI PCIE card to show in Hardware Drivers so the driver will work? I installed the drivers from the Ubuntu software Center. I am using Ubuntu 10.4.
View 7 Replies
View Related
Apr 26, 2011
I've just been trying to troubleshoot a problem by installing and activating the proprietary BCM4318 drivers instead of the ones that came with Maverick.I used System-Administration-Additional Drivers to install the new drivers. As far as I can tell from lsmod and URL... the new drivers are known as b43.It didn't occur to me to run lsmod prior to this, and now I'm curious - what would the non-proprietary drivers that came with Maverick have shown as in the lsmod output?
View 8 Replies
View Related
Feb 5, 2010
I want to install this drivers but it dones't want to show screen after installing them what can i do solve this problem other then uninstalling them in recovery mode the point is to fix the problem not just to go back to ubuntu without driver.
my card is hd3650 512mb ddr 2 shappire agp card with crt screen
View 9 Replies
View Related
Jul 3, 2010
I have a Broadcom B4312(I believe) wireless card and installed the drivers for it, but under the Wireless tab in Network Connections, it doesn't show "wlan0" or anything similar to "eth0"(which it shows under "Wired"). I ran iwconfig and this is what I got:
[Code]....
View 9 Replies
View Related
Jun 7, 2010
I have a strange problem: Due to my small monitor I have set the gnome panels on top and bottom to auto hide. After installing the nvidia drivers the panels do not appear if I go to the edges with my mouse. If I switch the resolution to VGA (640x480) however, the panels appear again, but not at top/ bottom but in the middle of the screen.
View 1 Replies
View Related
Jul 19, 2010
I am working on Ubuntu 9.10.Since last two days there is issue while working with Terminal.Whenever I type a command and press enter it doesnt do anything. command is not executed. I guess its in loop. when I press Ctrl+C then it comes out of loop. this happens with all commands and I am not sure what is the problem.I have reinstalled Terminal but it did not worked.
View 8 Replies
View Related
Jan 27, 2011
I want to resize my harddisk partition to make it bigger is there a console commands to do this ? I have some free harddisk that I want to ubuntu to use, I have hear that one can use Gpart, but is it also possible achieve the same by using some commands ?
View 4 Replies
View Related
Apr 29, 2011
Yesterday I tried upgrading from 10.04 to 10.10 using the upgrade manager. About half way through, my computer froze up and the only thing I could do was reboot my computer. It had already finished downloading all the upgrades and the computer froze while it was trying to install the upgrades. When I boot my computer and the Grub screen appears, I chose the Ubuntu OS (I have a dual boot system of Ubuntu and Windows XP). When it goes to boot Ubuntu, it gives me a blank screen and then a box in the right hand corner that says this:
"Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
Then the screen remains blank. No cursor, no mouse pointer, nothing. I have researched this error message and it is either caused by not having any free space on my hard drive or that the upgrade packages weren't installed properly. In my case, it could be both. It is definitely the packages not be installed properly but I don't know how to find out if there is no free space on the hard drive partition for Ubuntu. Some of the solutions are to use the following commands in the terminal:
sudo apt-get clean
sudo dpkg --configure -a
sudo apt-get --reinstall install ubuntu-desktop
The last command might cause me to lose previous settings, so that would be a last resort if the first two commands don't work. So my main issue is that I cannot open a terminal. My computer is set up to automatically log in. When my computer boots, I have the Grub screen which allows me to choose the Ubuntu OS, Ubuntu in recovery mode or Windows Xp. However, when I choose Ubuntu in recovery mode and select "c" for the command line, it does not recognize the "sudo" command. Same when I choose the command line in the regular Ubuntu OS. When I type "sudo apt-get clean" (without quotes), it says "Sudo command not found." I cannot find the command lines that would be the equivalent of a "sudo" command to use in recovery mode.
If you hit the TAB key while in the command line of recovery mode, if gives a list of commands but I don't see a way to open up a terminal window. For example, when I type terminal_input, it just says, Active: Console, Available: usb_keyboard." I have also tried selecting the Ubuntu OS, waiting for it to boot and then hitting Ctrl+Alt+F1 but it does not give me a log in screen. I have tried Ctrl+Alt+F2 and Ctrl+Alt+F7 and neither of those give me a log in screen either. It is just a blank screen. No cursor or mouse pointer is visible. All I want is the ability to open up the terminal so I can run "sudo apt-get clean" and "sudo dpkg --configure -a".
View 8 Replies
View Related
Oct 14, 2010
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
View 9 Replies
View Related
Feb 6, 2015
I have a server in which I'm trying to install Debian into. There's no BIOS, only EFI boot. The vendor locked it down so there's no way to see it or get into it.
The Wheezy 7.8 netinst CD has EFI boot parameters and works on everything I throw it in, except this one server. Booting it up, the code doesn't see the EFI and boots into normal mode, negating every chance to install it (dozens upon dozens of failed installs).
During boot, I press the [TAB] at the Debian Linux installer menu and get the load parameters (/install.amd/vmlinuz vga=788 etc). What parameter can I add to this line to get it to run in UEFI mode so we can install it?
View 10 Replies
View Related
Apr 28, 2011
I configured it to use IMAP to access our exchange 2010 server front end on a LAN connection. Our webmail connection is segregated behind Forefront, so it was not connecting/authing that way. Even though smartphones have no problem. (sidenote, is there an activesync linux mail client ?)
I have many root folders and several folders underneath my inbox. total mailsize in inbox is 3.5 GB without subfolders. The sent is likewise as large. And is likewise empty.
Things I checked already:
View is all
Folder subscription is on and local copy is on
More info:
Thunderbird worky fine.
But thunderbird is missing calender
Tried adding lightening, but it won't add into thunderbird.
Will try finding a diff add on, or if anyone knows how to get lightening into thunderbird 3.1.8 on ubuntu 10 that would be great as well.
View 1 Replies
View Related
May 25, 2010
I can't see any lvm option during installation
View 9 Replies
View Related
May 19, 2009
I've got an F10 install on an old IBM machine. I am trying to repartition the hard-drive, but all my fdisk commands in terminal give me errors. I made a DOS boot floppy on another machine so I could do it that way, but when I try to go from A: to C: the computer says I have no hard drive installed.
View 4 Replies
View Related
Dec 20, 2009
I have just installed 11.2 i686 on two machines, one virtual and one physical. Both have been set to start in runlevel 3. For some reason it seems that my installations have missed some step in the process, because the system cannot find several rather important commands, eg. init and ifconfig.this is what I get if I try to run ifconfig:
Code:
user@computer:~> sudo ifconfig
sudo: ifconfig: command not found
[code]....
View 7 Replies
View Related
May 12, 2010
I had no problems upgrading from Karmic Koala to Lucid Lynx and all data/documents were preserved. However my DVD player does not show up on the desktop when a DVD is put in and Movie Player won't play.
View 2 Replies
View Related
Jan 14, 2011
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
View 9 Replies
View Related
Jan 22, 2011
OS: Windows 7Problem: Want to dual boot Ubuntu and Win 7, but OS screen won't show after POST.I need some assistance in installing Ubuntu 10.10. This would be my first Linux installation, all I have done otherwise was virtualize Ubuntu 9.10.I have tried installing two times now but I can't get the boot screen to pop up for when I dual boot and check my OS.So here is what I did, not ever partitioning a drive before for duel booting:1. Go into Disk Manager and shrink the volume of the main HD by 25GB (I was going to use this for Ubuntu)2. I then inserted the Live CD with Ubuntu 10.10 on it and proceeded to install, however when choosing where to install it, I chose the advanced options and chose the partition that I set aside as free space for Linux (25GB -- 25600MB).
3. I set the boot loader to this partition, as the other partitions are the w7(windows 7) loader and the label of the HD. The partition was labled dev/shd5 or something like that. But when I am done installing and try to boot normally the screen where I am to choose which OS to boot does not appear.Question:What should I do to dual boot? I also tried selecting boot alongside another (or similar) and set the same settings as using the dev/shd5 free space that I allocated (25GB) and placing the boot loader on the same partition, which is not the main partition.I do not want to overwrite the Windows Partition as I have things on there that I will need,
View 4 Replies
View Related
Jan 23, 2011
My system had Windows Vista initially. I installed Ubuntu 10.04 64 bit initially and everything was fine. I was able to use both the OS. Recently I installed Ubuntu 10.10 32 bit in the same partition as Ubuntu 10.04 by dividing it into two equal halves. Now I am able to boot into 32 bit 10.10 but when I try to boot into the old 64 bit 10.04 it says unable to mount /root/proc, and some other "Unable to mount.." messages and it gives me a command prompt. I entered into 32 bit 10.10 OS and did update-grub2 and when I restart, the boot menu has no option for 64 bit 10.04 version at all... How can I restore my Ubuntu 64 bit 10.04 and boot into it..
View 9 Replies
View Related
