Ubuntu Installation :: Controller Receiver Stop Working Randomly
Nov 11, 2010
I installed Ubuntu as well but was still using the windows loader. I eventually installed Ubuntu Studio when I got another HDD (which is where I installed it). Don't ask me how I did it. As of now no loader automatically pops up. It acts as if there is nothing to boot from. However I can hit f12 and chose which HDD to boot to. On one it comes up with the Windows loader w/ Vista and Ubuntu. I can chose Vista and it works just fine. However if I chose Ubuntu it starts going a lil nuts and restarts. If I chose the other HDD it boots up Grub w/ options of Ubuntu and Ubuntu Studio. Studio works (which I'm currently on) and pretty much the same thing happens as before when I chose Ubuntu. So if the 2 OS's that I need work (Only really use windows for games) then what is the problem? I know its a little bit annoying trying to remember to hit f12 and having to chose your OS again after that (and of course the extremely annoying vista startup times). Some other things in both Studio and Vista don't want to work like they should. This is about the only thing left that I could think of that may have something to do with it. My wireless card+an old wireless card I found won't work w/ either.
Yet they both work on other computers running Vista and/or Ubuntu (not studio). I seem to always keep having display problems on both as well (dual monitors and graphics both). Even on studio I have to restart it sometimes to even get it to let me go fix it. My wireless controller receiver (for games) will stop working randomly and need to be unplugged and plugged back in. I also have problems with Studio recognizing SD cards and DVD/CD's. I am not sure much of anything can be done aside from wipe and fresh install on both. Bad thing is I don't have my other computer with me and can't afford to buy a 1TB HDD right now.
View 1 Replies
ADVERTISEMENT
Nov 7, 2010
I had been happily on Jaunty Jackalope until they stopped supporting it so I took the forced upgrade and it's HORRIBLE!
I feel like I'm back in Windows land. Within an hour of my first load I had my very first Ubuntu total-lockup. Just like Windows. In the 18 months I'd been using Jackalope I had not had a single crash. Not one.
It's slow, jerky, and has odd freezes. Just like Windows. Applications randomly stop working and die. Just like Windows.
Is there any way to fall back to Jackalope or is there any hope of them fixing Koala? 'Cause this is wretched.
I see there's another version out there...10.04.01.LTS. I'll try that. It can't be much worse.
View 9 Replies
View Related
Jun 3, 2010
I'm using Quicksynergy on my desktop (Ubuntu 10.04) computer as the server and Synergy on my Laptop (Windows XP) which is right beside my desktop.Everything works well for a while, but randomly seems to stop working. When I look into the problem, it seems that its with Quicksynergy on my desktop.I find that I have to quit Quicksynergy and open the system resources application to kill the Synergy daemon (or whatever it is) that Quicksynergy uses.Restarting Quicksynergy after killing the daemon fixes the problem as my laptop always reconnects perfectly fine.Does anyone else have this problem in Ubuntu? I'd like to get this fixed so I don't have to keep killing the synergy process and restarting Synergy.
View 5 Replies
View Related
Jun 17, 2010
I'm running Fedora 12 on a Shuttle SN78SH7. Updates are all current from the Fedora repositories. I'm using the Nouveau driver for the Shuttle's on-board Nvidia graphics adapter. At random intervals (1 to 5 times per day), my USB keyboard and the buttons on my USB mouse stop working and the desktop freezes (i.e. GKrellm graphical data stops updating, partially painted windows don't complete). However, I can still move the mouse pointer around the desktop. This only seems to happen when I am actually using the computer from the console. It has never happened while the system was turned on, but not being used.
When the mouse and keyboard stop working, I can log in from another computer via ssh. Once the computer gets in this state, the only way to fix things is either to reboot remotely using ssh or to cycle power. I've run low level hardware diagnostics - everything checks out OK. This computer only has USB and firewire inputs. No PS2 jacks.
View 1 Replies
View Related
Aug 7, 2010
I am running Ubuntu 10.04 on an AMD64 computer with an ATI Raedon x1250 graphics card.
Everything runs fine for about 3 hours, then it will randomly stop working.
Symptoms:
Mouse stops moving for 10 seconds.
Screen goes white.
Speakers start repeating last 10 seconds of whatever was playing.
Screen goes orange or purple with lines across it and random symbols...
At that point I hardware restart my computer and all is fine again
dmesg yields the following after every crash
Quote:
Quote:
View 9 Replies
View Related
Jan 29, 2011
I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
View 4 Replies
View Related
Aug 10, 2010
I have ubuntu 10.04 installed. I have a problem when my usb IR receiver is connected, than suspend mode isn't working. System will jump into black screen and that's all. Only hard reset works. I tested this problem also on ubuntu 9.04 and situation is the same.Is there any way how to force suspend mode without "looking" on this device? Do you need any log file to trace reason of this problem ?
View 2 Replies
View Related
Aug 11, 2011
I am playing with TerraTec T3 DVB-T receiver. TV works fine just right out of the box, but I can't make IR working no matter what I do.I tried to follow the instructions from linuxtv.org to configure LIRC and also followed recommendations from various forums in the internet, but nothing helped. Then I have tried gnome-lirc-properties, the device was detected, but no reaction on button clicks either.The device itself is Ok, I have checked it on Windows.I cannot say that I understand well enough how linux works with input devices, but I have a suspicious that no signal comes to the corresponding /dev/input/.... How could I check it on the low level?
View 2 Replies
View Related
Apr 24, 2014
I'm using Debian Jessie (64-bit) with XFCE
Code: Select all$ uname -srvmo
Linux 3.12-1-amd64 #1 SMP Debian 3.12.6-2 (2013-12-29) x86_64 GNU/Linux
And my middle button doesn't work anymore. The problem doesn't seem to be configuration-related as xev, xinput test and cat /dev/input/mice show nothing after clicking the middle button.
Here's the output from xinput:
Code: Select all$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
[Code] ....
Could it be a kernel issue?
View 1 Replies
View Related
Jul 7, 2010
My friend has a Linux base receiver and he using that receiver as a server he was asking me if he can remotely access that receiver from another computer and do the work he needs to do and be able to restart the receiver remotely. If you can do it how is it done using win xp.
View 6 Replies
View Related
Jun 12, 2010
I bought a used server and it's in great working condition, but I've got a 2-part problem with the onboard raid controller. I don't have or use RAID and want to figure out how to stop or work around the onboard SATA raid controller. First some motherboard specs.: Arima HDAMA 40-CMO120-A800 [URL]... The 4-port integrated Serial ATA Integrated SiliconImage Sil3114 raid controller is the problem.
Problem 1: When I plug in my SATA server hard drive loaded with Slackware 12.2 and linux kernel 2.6.30.4, the onboard raid controller recognizes the one drive and allows the OS to boot. Slackware gets stuck looking for a raid array and stops at this point -........
View 11 Replies
View Related
Jun 12, 2010
I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies
View Related
Nov 3, 2010
It bounces on and off. No pattern, but mostly off. I have ran it off a live cd and off the hard drive, multiple live cd's and versions of ubuntu. Even a usb mouse does the same thing
View 2 Replies
View Related
Dec 27, 2010
Lspci:
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
My wired LAN keeps dropping randomly, average of every 30-60 minutes. Fresh install of 10.10 from iso, Been installed for about 4 days now, just performed system update today, no change.
My router actually completely resets itself. You can watch the lights power off and recycle doing their POST. Absolutely no problems in windows 7 dual boot configuration.
I am no downloading anything, not streaming, not doing anything actually. My computer is completely idle (save for BOINC) and all of a sudden my phone loses the wireless connection which lets me know that my router just reset.
Ubuntu is actually doing this, my wireless stays up indefinitely in windows. Once the router resets, it does automatically reconnect without a PC reboot, but why is it resetting my router?
If you need the bootscript, already posted here: http://ubuntuforums.org/showthread.php?t=1651262
View 4 Replies
View Related
Mar 19, 2011
programs (especially Firefox, though I haven't used other programs much) stop responding rather frequently without warning and after some time they just start responding again. Apt-get also takes ages to unpack stuff when I'm upgrading/installing something, that might be related. According to top there is barely any cpu usage at all during these freezes. I had this issue on a stock Lucid install. When Maverick came out, I tried that one, and the issue still existed. On a fully upgraded Maverick system, it's still there as well. Windows works without a hitch, as does Ubuntu running under a VM on windows.
System specs:
CPU: Phenom 2 x4 945 @ 3 GHz
GPU: Radeon HD 5770 with fglrx
4 GB of ddr3 ram
Motherboard: Asus M4A89GTD PRO
Hard drives: 2 WD 1.5 TB drives running on a fakeraid 1 array
View 2 Replies
View Related
Jul 7, 2010
I am currently troubled with a very annoying problem - the volume level of the PC is jumping higher and lower at random intervals. It makes listening to music very difficult, as at times the music can go from just right to overly loud, just to fall right down so that it is hard to hear. I've only noticed this problem in the past few weeks, and I can definitely say it wasn't an issue in 9.10. This is a fresh install btw, not an upgrade.
Some details:
Using motherboard sound, Realtek HD Audio, iirc. Below is the output of lshw, with the irrelevant parts cut out.code...
View 7 Replies
View Related
Feb 4, 2011
I have installed Ubuntu 10.10 on other machines before and have not experienced this problem. Occasionally, the system will lock up. They keyboard and mouse stop responding (my keyboard status lights no longer respond, but my optical mouse light is still on). I can ssh to the machine, and it seems to work as normal. I kill processes that are open on my desktop through ssh, (i.e., Firefox), and I notice when I switch back, I still have the same frozen image on my screen. I have looked at the following files to determine any issues with the GPU:
[Code]...
View 2 Replies
View Related
Sep 29, 2010
I recently bought a Shuttle XS-35 Mini-Barebone-PC and filled it with a 2GB Corsair RAM and a 1 TB WD Scorpion Blue Drive.After assembling all the parts I simply wanted to install Ubuntu but it simply doesn't work. However then I had the idea it would be good to kinda get the drive to a completely clean state and used the tools to safely wipe the whole HDD (by writing zeros everywhere as the tool tells me). The tool ran good for around 30 minutes but suddenly the write speed showing in the console window would go down to 0B/s (meaning basically nothing at all I suppose). I tried it 2 more times and it always came to a halt at the 10-20GB mark.
So this lead me to belief that that is also the problem while installing, that my drive doesn't want to wark anymore but rather just sleep a bit.What could be the problem? Is it a hardware error? Is there some linux system setting that could whip my HDD whenever it gets lazy? Did I do something else wrong?
View 2 Replies
View Related
Jan 11, 2010
System was running fine under 8.04 but decided to update. The live CD works fine but after install, the Mouse and Keyboard stop working under 9.10. Even the keyboard power button is off. Disconnecting and reconnecting the keyboard or the mouse does not . AMD Athlon 64 X2 3800+ PS/2 Keyboard and PS/2 mouse
Everything else seems OK but how would I know without the keyboard or mouse. The keyboard turns off right before the first Ubuntu screen. The Numlock will go off and then nothing. Tried to run dpkg - fix broken packages after booting to repair. All I get is fail to fetch http: (whatever )Could not resolve us.archive.ubuntu.com. Update: Alt-F3 ... then Booting to terminal mode does not disable the keyboard.
View 9 Replies
View Related
Dec 21, 2010
i am having a problem with the installation with ubuntu 10.10 during the installation, i was entering my setup info (login password, timezone, etc.) when everything stopped working, it wouldnt let me continue, the forward button wouldnt work. i let it set for a good 30 minutes but it wouldnt do anything.
so unable to continue, i restarted and tried to boot from my cd drive and now it wont boot from the drive, and since i let ubuntu delete my windows partition, i cant boot from it so i basically have a blank hard drive. the cd drive will boot other cds because i booted hirens boot cd in an attempt to make sure the cd drive was functioning and ran diagnostics to make sure the drive was alright.
View 6 Replies
View Related
Apr 7, 2010
I'm trying to find a reasonably priced PCI to IDE controller that will work under Karmic. I have just built up a new PC which has SATA HDDs and want to put my old IDE drives in it. It has only one IDE interface on the mobo which I've got my DVD/CD drive on.
My research so far has found users have tried in the past with varying success.
View 8 Replies
View Related
Jul 11, 2010
I have a PS3 Sixaxis controller, and a USB cord. I downlod "QtSixA" properly, and in the GUI, a controller is recognized as a USB controller.However, when I open up emulators, or games, I'm unable to map controls to the PS3 controller, or anything. What am I doing wrong?
View 5 Replies
View Related
Aug 19, 2010
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
View 9 Replies
View Related
Mar 31, 2011
I'm having a problem here with my graphics card. Until not very long ago I was using the controller Ubuntu downloaded for me. However I recently downloaded another one from the ATI page, called ati-driver-installer-11-3-x86.x86_64.run and installed it.
So far, I've encountered two new problems:
1. The ATI Catalyst Control Center would not open after I setup the Tear Free Desktop.
2. The computer is running slow. Files take longer to open, minimizing and maximizing windows takes longer. Wi-fi connection takes longer to connect, etcetera. Overall, everything is going slow.
Are these problems related? I would like to uninstall the driver as the computer was working just fine before. In addition to this, I have firefox 4.0 and the colors on most of the images are darker than they should. The images look fine on other browsers except firefox. I read I had to do type "about:config" in the address bar, find "gfx.color_management.mode" and change the value from 2 to 0. What did I exactly do there? I took the advice from this thread: [URL]
View 2 Replies
View Related
Sep 15, 2010
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
View 4 Replies
View Related
Jun 18, 2010
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
View 2 Replies
View Related
Aug 1, 2009
I have a Dell XPS M1330. I installed Fedora 10 on a separate partition and left Vista on the first. It was working just fine and for some reason all of the sudden it is not recognizing the Wireless controller. Vista is still working fine although I did get a couple of "WLAN controller has stopped working" errors. I suspect I may have a physical problem with the controller but I'm confused as to why Vista is still using it but Linux is not. The actual physicall "WIFI" light on the laptop does not even illuminate when I boot Linux. No wireless networks appear in the network list under Linux. Particularly since it WAS working fine for months...
View 4 Replies
View Related
Oct 27, 2010
How would i go about getting my PS2 controller working in 11.3? It's connected via a PSX to USB adapter.
View 1 Replies
View Related
May 26, 2010
It has to be an update or something that cause this. I've done nothing differently from the other days I use this laptop. I have to keep relogging every now and then because the sound stopped working. I can turn the volume up but pidginrhythmbox, nothing makes noise anymore. it's random...it just started happening today and this is the second time the music went out. anyone have any idea of how to stop this from happening in the future?
View 9 Replies
View Related
Mar 3, 2011
I'm using Ubuntu 10.04 since several months and I randomly have problems with the keyboard (PS2). Maybe 2-4 times per week the keyboard stops working all in a sudden. The symptoms related to this can be- the keyboard simply does not react any more to key press- during typing the keyboard gets crazy and fills the lines with the last typed character- opened windows move to the left when touching them at the top bar, keyboard does not react any more. When clicking on a panel menu the focus line is running permanently quickly through all items, and it's practically impossible to click on any of those (so even shutdown is difficult to achieve, and I might need to use a hard reset).
In nearly all cases the problem only disappears after reboot, just very rarely a logout is sufficient to get the keyboard working again. I googled for similar problems and found quite some people having problems with keyboard (and/or mouse) not working correctly under Ubuntu, but I have not stumbled over a similar error description as I have.Just some config parameters on my box: amd64, XOrg uses an Nvidia driver, 3D and Compiz are activated
View 4 Replies
View Related
