Ubuntu Installation :: Can't Seem To Get The System To Recognize The Install And Boot From It?
Jun 6, 2010
I've been trying to do this forever, and I just can't seem to get the system to recognize the install and boot from it. Do I need to create a very small bootstrap partition or something?Just for clarification, I've tried installing to the onboard ide controller as well as the raid controller. Both installed, but failed to be picked up on boot. The system only seems to be able to boot from cd. Furthermore, I can't seem to use the CD to boot from the hard disk.
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I am trying to install ubuntu 10.10 on my system which has pre installed windows7 x64. I have 2x250 gb HDDs. 1 HDD has 2 partitions of 100 & 132gb while the other has no partitions. Now when I boot through usb, ubuntu doesn't recognize my partitions and considers it as a whole 500gb hdd (see screenshot) and I am not using any raid array or nvidia sw, infact I have an ATI GPU! I want to install ubuntu on my first HDD by creating a third partition of 12gb by creating to using windows. Also on which partition should i install the bootloader?
i can't boot up my win XP after installing Ubuntu 10.10.
I decided to replace my Vista partition with Ubuntu 10.10 so i redo my partitions and split the current Vista partition to a swap and root partition and install Ubuntu 10.10
Everything went well and i got Ubuntu up and running. However, i realize that GRUB 2 didn't recognize my existing windows partition. I double-check on grub.cfg and see that the default os_prober didn't recognize my XP partition either.
After search on the internet for a while, i found many similar issue where most are fix when manually adding the entry yourself so i decided to add an entry 11_XP under /ect/grub.d/ for windows XP and confirm that the new entry are added to the update grub.cfg file before restarting
Code: ### BEGIN /etc/grub.d/11_XP ### menuentry "Windows XP" { set root=(hd0,5) insmod chain drivemap -s (hd0)
So heres the thread i had a while back ( url) that had you guys help me setup the pretty standard dual boot of Win 7 and Ubuntu. I have 2 hard drives, main one (640gig) and backup (80gb). I have Win7 installed on the 640 and ubuntu on the 80.
So i have tried installing the SP1 twice today and it has failed. When i click on details on why it failed, it says: url
I can only imagine that this has to do with my Dual Boot. Is there anything i can do or am i stuck? I THINK that my grub and master boot and all that was on the second hard drive and it is the first drive in line to boot up...so i thought i wouldnt have any issues. Not totally sure though.
Im tempted to just remove Ubuntu, its cool to say i have it, but i honestly havent loaded up onto it more than 5 times since i installed it. When you have windows already...its near impossible to want to get onto a free OS that doesnt have the codecs or programs and im not familiar with it. If it was all i had though, (aka didnt own Windows) then obviously it would be my main OS and im sure id love it and have is customized and perfect.
My computer have Windows XP installed and now I want to install suse 9.0. I insert the boot disk (disk 1) and reboot my machine.Then on the boot option window, I select 'installation'. Then comes the error: cannot find SUSE installation CD. Activating Manual.... Then 'English'-->'English(US)'-->'Installation'. Then comes another error: Cannot mount CD-ROM.
I have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB Windows 7 - 167 GB Ubuntu - Maverick - 73 GB Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
System was working reliably. Moved components into a new case. Now system will not boot. Either gives error that the disk is not bootable or displays the motherboard configuration screen.
I am able to boot Debian with a USB drive and have attempted fixes in "rescue mode".
I confirmed that the system is booting to EFI mode.
I have tried re-installing the grub-efi package and re-creating the Grub config file with update-grub.
When re-installing Grub I receive "Discarding improperly nested partition ..." warnings but the installation succeeds. I have searched this warning message and the forums seem to say that it can be ignored.
I have tried re-setting the motherboard NVRAM using the jumper block.
The computer shows "debian" as a boot choice in addition to the usual raw drive model listing. However, neither of the choices will boot successfully.
I would like to recover my grub installation in a dual boot system. if there is an easy way to recover grub using flash disk? If yes is your suggestion opensuse developed? (currently running 11.3) . It would be nice also to have some gui just to make things easier. If not I assume that then the only option is the boot from dvd. Is that right?
i have a Compaq Presario S4020WM 2.0Ghz XP2400 CPU 768Mb RAM 2 40Gb Hdd and a HD raedon 4650 AGB 1Gb Grafics Card
I have tried to install Ubuntu with this CD and it gets past the keyboard detection part and then it tells me i need to get the CD ROM drivers via removable media, i know this is a problem with ubuntu 10.04 because i can install just fine a 8.04 ubuntu.
i don't know what to do.I have tried to install from a USB but my comp is too old for that, i know its not the specific cd because i'v used about 5 different brands of cd just to see if it was the cds i was uesing,
I would just upgrade from 8.04 to 10.04 but i get to the dbus part and the comp starts to run really slowly and eventually colors just show up, i left it for an hour to see if they would go away and fix but they didn't. Iknow my comp CAN run 10.04 because i have done it before, but i uninstalled and now i can't seem to get it to work again.
First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub. Before I would have just edited menu.lst, but now?? I dunno. edit; Here's fdisk with Fedora on sda6
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e Nividea G7600 graphic card Former system installed and running flawlessly: 11.1
Installed ubuntu 10.4 over previous ubuntu on Intel 945G. After installation and reboot the system does not boot: "no bootable device - insert boot disk and press any key".
Installation was done from USB-stick, prepared by UNETBOOTin. I have two HD's, one used for system + storage, another one just for storage. I manually deleted previous system partitions of previous ubuntu install in system HD. The system HD had about 1/3 of free and unallocated space for system partitions, which ubuntu installer created during the installation.
I tried to reinstall grub from bootable USB-stick and it succeeded but it did not help. The system is still not bootable.
I have used ubuntu for years and never happened something like this. Am I missing something or is ubuntu missing something???
HW failure is ofcourse possible but I am quite skeptical about it because Live ubuntu from USB-stick works well.
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
When I first installed Ubuntu as a dual-boot (about 18 months ago), I had problems booting to XP, which were eventually solved for me in this thread, which set Windows to boot Ubuntu, rather than the other way round.
I've just had to do a fresh install of Maverick, following a major problem, and I'm back to being unable to boot XP. The error is different from before and I don't want to start guessing at what to do about it and screwing things up still further.
The GRUB menu lists Ubuntu first, then Windows XP. If I choose XP, it takes me to my previous boot menu, with Windows as the first option. However, selecting this gives me
Code: Windows could not start because the following file is missing or corrupt: <Windows root>system32 toskml.exe
Please re-install a copy of the above file. Windows and Ubuntu are on separate hard drives. XP was fine until I re-installed Ubuntu.
can't get system to recognize usb for direct saving fron frostwire, actually won't show usb stick at all for drag and drop. using Sandisk Cruzer 4MB (slim/silver)
I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
I installed a new, clean hard drive into my old iMac G5, and decided to finally set up a linux machine, I installed Ubuntu 9.10 with the 64bit mac software, and the instal went very smooth, however now there are a few hardware issues.First, the cd/dvd drive loads disks, but the system does not recognize anything inserted, and wont play any media. Second, the built in airport card doesnt want to work either, I can see the icon for wireless at the top right of the screen and it lets me plug in my network name and security, but wont connect or see any wireless networks at all, however, ethernet works fine, and it is how I am able to get online now. Lastly, the screen is slightly shifted to the right and the far right of the screen wraps around to the left side of the screen, its not major, probably a 1/4 of an inch, but it is annoying.
I am sure these are likely driver issues, but when I go to Administration, and Hardware Drivers it does not say I need any drivers. and when I run through "system testing" it says that this version of ubuntu is not genuine, or something like that, but I just burned the install disk last night from ubuntu's website.
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
I have a problem with recognising my mobile phone's memory card in Ubuntu 9.10. When I plug the phone in it starts the mass storage mode, but nothing happens in the PC. I suspect that I may have deleted phone's icon from the desktop, and I don't know how to bring it back. Also the memory card doesn't appear anywhere: nor in the Places tab, nor in Media folder.The phone is Samsung U900 Soul.
I can't seem to get my system to recognize my 24" Apple LED Cinema Display (DisplayPort) with a ASRock Z68 Pro3-M motherboard (i7 2600k, 1.40 firmware) using the iGPU/DisplayPort running Ubuntu 11.04 2.6.38-10-generic with latest updates. The system boots and runs (can ssh into it) but there is no display. The same system running Windows 7 x64 works fine. A DVI monitor also works fine. Xserver-intel driver sees the display but can't set any modes for it.
Log files dmesg lshw Xorg.0.log
Here is an excerpt from Xorg.0.log:
[ 14.167] (II) intel(0): EDID for output DP2 [ 14.167] (II) intel(0): Manufacturer: APP Model: 9236 Serial#: 34318216 [ 14.167] (II) intel(0): Year: 2009 Week: 28 [ 14.167] (II) intel(0): EDID Version: 1.4
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
About two days ago I installed Bodhi Linux on my machine. I like it because it's fast and small. Anyway, I have two issues: I can't get the system to recognize any of my audio cd's, or my USB drive. I don't even get a notification that there is anything in my DVD drive. The other issue is that I am unable to go in and look at my hardware configuration from the main window. I have looked through as many paths that I could think of without killing the system, and I don't want to try anything I know nothing about.
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
