Ubuntu Installation :: Windows Won't Start And Instalation Failed?
Sep 15, 2010
I have a double problem here. I had a problem with ubuntu which I more or less took care of but at the loss of much information but that is neither here nor there. The problem has to do with the here and now. I purchased a ubuntu 10.04 LTS CD. I installed it and partitioned it with my win xp. All seemed to go good but the problems seem to arrive when I booted to the other partition side.
I am able to select the windows xp side and hit enter and and boot to xp. However when I wanted to go to the ubuntu side of things this is where the problems happens. I click enter the ubuntu selection and this error shows up."Windows could not start because the following file is missing or corrupt. <windows root> system32hal.dllPlease re-install a copy of the above file."
The only way I can of getting to the ubuntu side is by inserting the ubuntu cd into the cd/dvd drive. However when I do I get this message."Installation Failed.The installer encountered an unrecoverable error. A desktop session will now run so you may investigate the problem or try installing again."I am hoping that someone here will be able to assist me in finding an solution to my dilemma.
I just upgraded to Debian 6.0 squeeze 32 bit XFCE from Ubuntu on my old Dell PC. Installation went well, however, i can't get into X windows after reboot, the screen just displays garbage Specs: Dell dimension 600Mhz/384M RAM/10G HDD ATI RAGE pro 128 Any pointers on what should I do?
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
Kde does not start after slackware 13.0 instalation. Mouse just stop and the computer freeze. When I type startx Kde try to start, but everything stop. Does anybody know what could be this ? What log should I look ?
I wanted to try openSuse alongside with Windows Vista and Ubuntu. During the installation Suse wanted to delete my Windows partition. Of course I denied and stopped this installation, but now when starting my computer, the boot menu gives Vista, Ubuntu and Suse as a choice, but if I choose Vista, the Suse installation process is starting instead of Windows, there is no way to get Windows started (fortunately Ubuntu is working so that I can write this message).How can I get Windows starting?
i was install wine with the soft ware center when my computer crashed, now i cant uninstall it or cointinue the installation or unistall, when i do try to unistall i press the unistall icon nothing happens. when i go into the software center to try and reinstall it says waiting for other software managers to quit,
I'm trying to install ubuntu 9.10 on a new Dell studio 1535. Since I have 4GB of RAM I went with the 64bit version. I can get to the menu where I select to check disk, install, try without changing etc... However when I tried to check the disc integrity I saw the Ubuntu logo for about ten minutes and then let it sit for another 20 minutes, and all I saw was a blank screen. I then tried making another CD and came up with the same results. I then tried to install and at first it was like before, but then i started getting different error messages the majority had the form: [ 771.744543] Buffer I/O error on device sr0, logical block 337015another looked like:[ 1244.029631] end_request: I/O error, dev sr0 sector 673592a few said something about SQUASHFS.I have tried three different CD's I looked at the hash and they matched up so the file is fine. I downloaded the 32bit version and I'm going to try that just to see if it works.
I have a very old laptop with no CD and no Floppy and a BIOS that won't boot from a USB device.I wanted to install Ubuntu on it though so I pulled the hard drive and connected it to my Macbook via a USB-to-PATA adapter. I booted the Macbook off the live CD and tried to install Ubuntu to the USB drive but the install wanted to update the boot partition on my Macbook which I would prefer not to do (I run Ubuntu on the Macbook in a VM). Instead, I used the Startup Disk Creator in Ubuntu 10.04 to make the hard drive from the old laptop an Ubuntu Startup Disk. I put it back in the laptop and it works fine, but when you boot it asks if you want to install Ubuntu and of course you can't because there is no available disk.
I thought about pulling the drive and doing this all again but splitting the drive into two partitions so I could make one partition the startup disk and install to the other, but I was not sure this would work. The disk in question is only 12 GB so I don't have a lot of space to work with. Also, this particular laptop is a huge pain to get the drive out of so if I can somehow fix this without removing the drive again that would be awesome. If there was some way to just convert the startup disk to a "regular" installation that would be ideal.
I was using the 9.10 version of Ubuntu, and everything was ok. So I decided to update to 10.04, by update manager, and it not works pretty well. So I decided to reinstall my ubuntu. In my PC I also have a instalation of Windows XP, my father and sister uses it. The installation went well, no problems, Lucid Lynx is working fine. But in the grub screen, if you choose Win XP, the CPU starts to whisthle continuously, and the only thing you can do is restart.
I have been reading about it, but do not find the exactly same problem. I have posted a thread in a portuguese forum (im from Brasil) and have no good responses. Sorry about the bad English, I dont have to much experience writing.
I have just run a fresh install of Kubuntu on an old PC to try it out for a few weeks. The Boot CD works fine and there is a GUI for the install. It seems to detect all the devices without a hitch. But when the PC reboots it boots into command line. When I try to run startx it gives me "AddScreen/ScreenInit failed for driver 0"I looked up the x.org website and in the FAQ Here it says "This kind of problem typically occurs when you're using a big monitor with an old graphics card. You can solve it by deleting some of the highest resolutions of the deepest colour mode in the Screen section of your xorg.conf, or even the whole last Display subsection."I am using an old pc with old graphics card with a 25inch HP LP2465 monitor. in my /etc/X11 there is only a xorg.cof.failsafe file. anyone any ideas on how to do this. The full error is attached in a very bad screenshot.
I am having some problems installing Fedora 15 64-bit. I use the install DVD. I have an AMD Phenom and a NVidia 8600GTS. When I install using the normal method, my screen freezes somewhere in the settings screen for choosing the computer name. If I use the basic video driver for installing I have no problem. However after everything is installed, and Fedora starts, Gnome says that it failed to start and some features are not available.
I found some information at [URL] that I tried. However after installing kmod-nvidia and rebooting I no longer see any graphical display. A lot of text is on the screen without any error, but no x-windows appears. What can I do to install Fedora correctly and have a good working system? Is the 32-bit version easier to get it working? How can you recover from a system that does not start? What I could do to recover from it.
Which I downloaded from the skype website. This version worked fine. However, I did use it for a long time. I tried it last night and it didn't work. I got the following error:
Code: Failed to lauch skype, failed to execute child process
GNOME 3 Failed to Load Unfortunately GNOME 3 failed to start properly and started in the fallback mode.This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience.
.The interface is now Gnome 2. I have not change screen resolution 1280�720, now is 1024x768.
Result of xrandr -q
Quote:
xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*
I have managed to get the OS installed onto a second hard drive, but I have to use my BIOS to set up the boot to choose the OS I want to use. How do I get the computer to see both OS's?
I am pretty new to ubuntu, and not sure if this question has been solved by anyone, I tried search this forum, but didn't find enough information. The closest thread I found here was this one:[URL].. Here is my situation, I have installed Ubuntu 9.04 a few days ago with an old Live CD, after running it pretty well, I upgraded it to 9.10 with the online update tool. (I guess this makes sure I was using Grub 1, the legacy Grub). After updated to 9.10, I installed a Windows XP on my hard drive, obviously, it wiped off my Grub from the MBR. So I tried to restore the Grub back to the MBR, but failed, please see below:I first run the fdisk
I downloaded latest Ubuntu version 10. I bruned it to CD disc. I run WUBI.exe. Some files copied to the hard drive, but the error message interrupted in the middle of the installation process. It said unable to install -- permission denied. I don't see what is wrong. My Windows XP is full administration control. All the files should be able to write to drive c without any problem. What is the cause? Could files in ISO image be corrupted?
I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
I'm new to the world of dual booting Ubuntu. My computer is currently running windows 7 64-bit, and I'm trying to install Ubuntu 32-bit to run beside it. So I've created a boot disk, and I try to install Ubuntu. The weird thing is when I get to the frame that says "Prepare disk space" it correctly shows that I have windows 7 on the computer, but it shows it's on the wrong drive. In fact within the Ubuntu installer it doesn't even show the physical drive that windows is on, it only find the other two drives. If I load up System > Administration > Disk Utility then I can see all 3 physical hard drives and all the partitions on them, but not under the Ubuntu installer.
So I tried installing Ubuntu onto one of the other physical hard drives and that seemed to go just fine. The only problem is now when I boot, the only way I can swap operating systems is to go into my BIOS and change the boot order of my hard drives. If the hard drive with Windows is higher in the boot priority, it will boot windows, no problem. If the hard drive with Ubuntu on it is higher, then it takes me to grub, where it correctly shows windows 7 and ubuntu. Only problem is when I choose windows 7 all I get is a blinking cursor and nothing happens.
If I choose Ubunutu it boots correctly and everything works. So in a way I do kind of have them both working, but it'd be nice not to have to go into my BIOS just to change operating systems. I'm guessing that grub's problem is that the Ubuntu installer identifies the wrong drive that Windows is installed on, so when I pick Windows from grub it goes to the wrong drive. Can I fix grub manually? Or is there some compatibility issue between Windows 7 64-bit and Ubuntu 32-bit that is causing this conflict?
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
I have duel boot Windows XP and Ubuntu 910. I've just downloaded and installed the latest update for Ubuntu 9.10. After my latest update, Windows will no longer start. When I select Windows from the grub loader, the screen goes black with a blinking white horizontal cursor at the top left of the screen. I have read that it may of something to do with "update from Karmic to Lucid", what ever that is.
I am having trouble getting a dual boot setup on Ubuntu remix on a netbook. The install went fine, but then windows would not book. I had a windows error. So I reinstalled windows, and rebuilt grub. Now when I try to launch windows from the grub menu it says "error: no such device: 0a82ff1982ff0849". How do I go about fixing that? I can boot to Ubuntu fine now.
I used to have Windows XP Professional on my computer, then I decided to install Ubuntu but it didn't work for me it gave me really weird errors, I thought I uninstalled it, and then I installed Debian on my computer, Debian ran smoothly but when I tried to start Windows the GRUB from ubuntu appeared and when I tried to start windows again it showed and that the hal.dll was missing, I reinstalled Windows but still the same error appeared, this also affected my Debian GRUB so I had to install it again, I don't know what I should do in this case. How can I delete ubuntu's GRUB for good? I've already formatted my windows partition but it keeps using Ubuntu's GRUB.
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4). 2. I can access the windows partition from Linux and see all the files. 3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP. 4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
I just upgraded to 10.04. I went with the option of upgrading grub as well, should of just stuck with the old one I guess. I have 2 seperate physical hard drives, and now I can't get vista running on my other drive. I get to grub, choose the run vista option, and now it just blinks one underscore line in the top left corner of the black screen, and goes nowhere. When I was installing the upgrade, and when I got to the grub upgrade i tried to upgrade all teh different options in grub. All of them worked except the last one, and it warned me, that one of boot options in grub didn't install properly and may cause my OS not to start up. I guess that must of been the vista option.
Im new to linux and everything and have never done a dualboot before but i have instaled ubuntu 10.10 (going to update to 11.04) and everything went as planed and i partioned the hard drive equally on the live cd installer. but now when i go run windows xp pro from the GRUB menu it boots with the xp loading bar for about 3 seconds the goes onto the windows bluescreen. Ive tried this about 5 times.
clarify the outcomes of the four step 4 options. I have sda1 - 15GB; sda2 - 106.9MB; sda3 - 163.8 GB; free space 141.1GB on a brand new machine - no user files or programmes to worry about.
I want: dual boot up choosing between ubuntu and Windows 7 at start-up, "my files" (presumably equivalent to ~/home) to be available to both windows and ubuntu and to be "separate" for no "second guessing" back-up AND no problem ubuntu (and windows I suppose) upgrades.
I have a Dell Latitude D620 which came with Windows XP. I have just installed Ubuntu 9.10 on the laptop so it can dual boot but I can't connect to the internet.I have a dynamic IP allocated by my broadband service provider which I access by a wired Netgear DM111P router (not cable). It still works fine when booting up windows.I've read through lots of posts by others trying to find a solution as the 9.10 install has just been done and I've not changed anything.
My tentative assessment is the laptop, when running Ubuntu, is not communicating with the router as there seems to be no IP address allocated by the router.
I have an old pentium 4 with an ati card agp. 320mb ram. just for testing. i followed all the screen instruction and everything was installing well. then it say , remove cd and press enter to restart. i did. now it boot up fine , but at the end just a blank screen.
