i was install wine with the soft ware center when my computer crashed, now i cant uninstall it or cointinue the installation or unistall, when i do try to unistall i press the unistall icon nothing happens. when i go into the software center to try and reinstall it says waiting for other software managers to quit,
View 1 RepliesI was upgrading from 10.04 to 10.10 when my laptop crashed due to a HW issue not related to upgrade. But now when I start:
1) The laptop, it boots up till the point GDM log in screen is displayed without any log-in option. The system does not respond to any keyboard or mouse actions.
2) when I try to recover (recovery mode), the boot process comes til a point where it says "Console: switching to color frame buffer device 180x56"
And the prompt just stays there. It does not not drop to terminal. When I choose an older option in the grub, I do get dropped to initramfs prompt. How to restore my machine. re-instillation is not an option as I have some data I need in the home directory.
I was updating Ubuntu 10.10 to 11.04 and my computer crashed/shutoff because of overheating(my laptop doesn't ever do this when running Windows 7 but seems to really need to be as cool as possible when running Ubuntu). the update was at about 12-18 minutes left(also i am using wubi to have it run alongside windows). After getting pissed off that i forgot to backup Ubuntu i restarted it to see if it would finish updating.
To my dismay it the loading screen looked a bit unusual and when it go to the login screen the word "Ubuntu" was flashing uncontrollably and the time in the bottom right corner was acting the same. i feel that i have totally ruined it and i also don't know how i can remove Ubuntu from my computer so that i could reinstall it as Ubuntu 11.04 instead of upgrading from 10.10. i still have Wubi.exe for Ubuntu 10.10 but i'm not sure if that just searches for the most recent version of Ubuntu.
I am writing this from a LiveDVD of 11.04. My machine, which is an Inspiron1501 with AMD64 dualcore crashed while running a working copy of 10.04LTS 32bit. At first Harddrived seemed unrecoverable, but not that may not be the case if I can mount it. HD is partitioned as 1 FAT which holds the OEM installer1 NTFS with a sub/ virtual NTFS (not as a file, but as a "partition", only readable from WinXX) 1 Linux Swap 1 Linux Extention 3 (I believe it is 3, as in EXT FS 3) Machine initially displayed:
Code:
[ 2.736258] Console: switching to colour frame buffer device 160x50
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
After following some advice, I booted into Win and shutdown cleanly. Which has made the machine only say this on boot:
Code:
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
Now, to make things a little more complicated, my home directory is encrypted. Could I just copy that over to a new install provided I can get it to mount?
I just upgraded from Jaunty to Karmic, but once I loaded Karmic and rebooted, my computer will not complete the boot up sequence and go into any desktop. It starts the initial boot sequence with the mouse appearing and then goes to the screen that looks like it has an atom cloud. After that, the screen goes black and the mouse-arrow turns into that white rotating wheel, but it stays that way. It never actually goes into any type of operation! I tried to go from the command line and find Lucid to overlay it on Karmic and hopefully solve the problem. It just looks like to me that several of the packages I downloaded through my upgrade manager were corrupted. My computer doesn't even seem to be acknowledging my password because it gives me an error 32:must be authenticated.
View 7 Replies View RelatedI was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
[code]....
When I updated Linux it crashed in the middle of the update. I think there was not enough disk space. I had a windows dual boot and tried to make the Linux partition larger but in doing that a crashed grub and can't use Linux or Windows. I tried super grub but it didn't work so I tried to fix the partitions with gparted live cd. It my disk just showed up as empty. I formatted it and re installed debian but it didn't work. I can see partitions but my computer won't boot.
View 1 Replies View RelatedSo I attempted to Upgrade 2 days ago from 9.10 to 10.04. I started the upgrade and left my computer alone as it said it would take several hours. When I returned to check on it, It told me the the installation had failed and it was attempting to roll back to the previous installation. Afterward I couldn't access anything on my computer. I'd click a icon and it wouldn't do anything. I manually restarted it and was greeted with a message that it couldn't boot because there was no mount specified.
Since I had backed up all my files I tried to just reinstall ubuntu. However even after I reinstalled I'm greeted with the same message.
One of my disks in my computer crashed, it was the one containing /boot and some data partitions. The other system and /home partitions were on a second disk, which is ok.
I was wondering, can I create a new /boot partition, and keep on using the rest of the system? Can I somehow do it with a chroot from a live/installer disk, run grub, and use my system again? I have another disk which I can put in the system, but there is even an unused partition on the disk which is ok (but it is rather big for /boot).
I'm brand-new to Linux and Ubuntu, and I need to install Wine. I'm installing it on an offline computer, (I'm using Windows on the online pc), and I'm in need of the extra libraries required for proper Wine installation. The easiest way I've seen is to download/install the libraries via internet through the terminal. I can't though, because the computer's offline.
View 2 Replies View RelatedI have a laptop set up for dual-boot with Ubuntu and Win7. I also have a shared partition which I mounted as the /home directory in Ubuntu. The problem occurred as I was upgrading Ubuntu from 10.10 to 11.04. In the middle of the install, my computer froze for some reason and ultimately I had to shut the computer off and restart. When I restarted the linux would freeze half-way through boot-up with a message saying that the drive was mounted. Before the message saying the drive is not mounted it gave the following error: Can not read 'etc/udev_rule.d/z80_user.rules'
When I boot up Win7 it is unable to mount the shared partition and says that the drive is not formatted. I am also unable to run the ubuntu recovery option from GRUB. It asks me to give the "root password for maintenance," but it won't accept my root password. Would the upgrade have wiped my partition??? Or am I just locked out somehow because it was in the process of changing config files?
Using wine, re-installed EVE (hadn't played for awhile), things went fine, ran eve, things were fine... then like an idiot in the middle of the opening graphic sequence I tried to exit out... big mistake... system hung up and I had to do a hard restart. Upon restart the following has happened:
1. I currently cannot type into SOME text fields. I can type into Firefox, and Open office, but not into KDE wallet, Kubuntu search fields, or the terminal (big problem). If i go out of KDE and straight command line I can run terminal commands. I can also cut and paste into all text fields including the ones I cannot type into.
2. I've lost all X, Minimize, and Maximize from ALL windows, and cannot move windows. I can resize some windows, like firefox however. Windows are not layering properly, if any window is open the "start" button menu will be blocked out, and the opened windows will not layer behind it (makes me have to resize windows to shut down).
3. Tried to go back to a prior good configuration to no avail. The 3 most recent configs have the same errors now, and the configs prior to that are refusing to initialize KDE... screen will flicker and then go strait to command lines.
notes: I have tried changing graphics drivers to no avail, and have redone the keyboard selection to no avail. Also uninstalled wine, but that didn't do anything. basically, I can work within the errors and make stuff run, but it's a huge PITA. running Kubuntu 10.10*was running wine 1.3.5
I have a double problem here. I had a problem with ubuntu which I more or less took care of but at the loss of much information but that is neither here nor there. The problem has to do with the here and now. I purchased a ubuntu 10.04 LTS CD. I installed it and partitioned it with my win xp. All seemed to go good but the problems seem to arrive when I booted to the other partition side.
I am able to select the windows xp side and hit enter and and boot to xp. However when I wanted to go to the ubuntu side of things this is where the problems happens. I click enter the ubuntu selection and this error shows up."Windows could not start because the following file is missing or corrupt. <windows root> system32hal.dllPlease re-install a copy of the above file."
The only way I can of getting to the ubuntu side is by inserting the ubuntu cd into the cd/dvd drive. However when I do I get this message."Installation Failed.The installer encountered an unrecoverable error. A desktop session will now run so you may investigate the problem or try installing again."I am hoping that someone here will be able to assist me in finding an solution to my dilemma.
I'm trying to install ubuntu 9.10 on a new Dell studio 1535. Since I have 4GB of RAM I went with the 64bit version. I can get to the menu where I select to check disk, install, try without changing etc... However when I tried to check the disc integrity I saw the Ubuntu logo for about ten minutes and then let it sit for another 20 minutes, and all I saw was a blank screen. I then tried making another CD and came up with the same results. I then tried to install and at first it was like before, but then i started getting different error messages the majority had the form: [ 771.744543] Buffer I/O error on device sr0, logical block 337015another looked like:[ 1244.029631] end_request: I/O error, dev sr0 sector 673592a few said something about SQUASHFS.I have tried three different CD's I looked at the hash and they matched up so the file is fine. I downloaded the 32bit version and I'm going to try that just to see if it works.
View 1 Replies View RelatedI have a very old laptop with no CD and no Floppy and a BIOS that won't boot from a USB device.I wanted to install Ubuntu on it though so I pulled the hard drive and connected it to my Macbook via a USB-to-PATA adapter. I booted the Macbook off the live CD and tried to install Ubuntu to the USB drive but the install wanted to update the boot partition on my Macbook which I would prefer not to do (I run Ubuntu on the Macbook in a VM). Instead, I used the Startup Disk Creator in Ubuntu 10.04 to make the hard drive from the old laptop an Ubuntu Startup Disk. I put it back in the laptop and it works fine, but when you boot it asks if you want to install Ubuntu and of course you can't because there is no available disk.
I thought about pulling the drive and doing this all again but splitting the drive into two partitions so I could make one partition the startup disk and install to the other, but I was not sure this would work. The disk in question is only 12 GB so I don't have a lot of space to work with. Also, this particular laptop is a huge pain to get the drive out of so if I can somehow fix this without removing the drive again that would be awesome. If there was some way to just convert the startup disk to a "regular" installation that would be ideal.
my ubuntu laptop have crashed and all I get up is a terminal that report that it is a "read only file system". is there any way to move these files to a usb memory or to at least read them?
View 3 Replies View RelatedI was using the 9.10 version of Ubuntu, and everything was ok. So I decided to update to 10.04, by update manager, and it not works pretty well. So I decided to reinstall my ubuntu. In my PC I also have a instalation of Windows XP, my father and sister uses it. The installation went well, no problems, Lucid Lynx is working fine. But in the grub screen, if you choose Win XP, the CPU starts to whisthle continuously, and the only thing you can do is restart.
I have been reading about it, but do not find the exactly same problem. I have posted a thread in a portuguese forum (im from Brasil) and have no good responses. Sorry about the bad English, I dont have to much experience writing.
The computer crashed during an update and "An error occurred". The following details are provided:
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report."
So,
"michael@freegeek:~$ sudo dpkg --configure -a
[sudo] password for michael:
dpkg: parse error, in file '/var/lib/dpkg/updates/0117' near line 0:
field name '
michael@freegeek:~$"
I have installed on friday a new distro on my computer, ubuntu 10.04 lts on my 1GB ram and 3Ghz computer. It has dual booting system. Everything worked fine, i have even been using the xwindows and althought i must say that it felt a bit slow in time reaction to my typing still good enough. I left the computer running with no programs, just idle and now my computers screen is dead. I can not see anything.
I restarted the computer and in normal mode it goes black.I started in recovery mode and i manage to get to a console where I type startx and i see the next error.So I had a fresh install, i worked with the xserver (so i do not think is a driver problem) fine until i left the computer without running anything and the xserver crashed.
I have a desktop computer running Linux Mint 9 with the Gnome desktop (not sure what version -- though by default Mint 9 comes with Gnome 2.30). Last night I tried adding a panel to the desktop by right-clicking on the existing bottom panel and selecting "New Panel". Please note that I've already got another panel at the top of the desktop on the left side on autohide and no expand.
When I added another panel, it placed a normal panel on the right side of the screen without any problems. When I right-clicked on the new right-side panel and selected "Properties", I changed the orientation to "top" (where there was already a panel, if you remember). After that moment, it seemed like the entire desktop environment crashed. Everything was completely unresponsive -- the only thing moving on the screen was the mouse. I couldn't do anything with the gui, not even shut the computer down.
Since the gui shutdown wasn't working, I switched to a different tty screen, logged in, and ran a shutdown command with the option to reboot. The computer shut down fine, and when it woke back up, the same problem was still there: Nothing loaded on the screen except for the background image and the mouse, which was still able to move but nothing else. I have the computer set up to automatically log me in, so I know it's not crashing before the user prefs are being loaded...
After restarting it again and getting the same result, I switched to a different tty screen, logged in, and tried messing around with stuff to no avail. I did notice, however, that the computer was becoming evermore sluggish, and something printed on the screen stating that a program had been terminated because of "not enough memory". It seemed like some process was consuming WAY too much RAM by itself or a program was accidentally forkbombing the computer. ...All because I added a panel...?
I am using Ubuntu after a BSOD error. Ubuntu is awesome, I can access all my windows files, however, I need to access my programs on windows. Here's what happened- I accidentally changed permissions after getting a virus. I then tried to do a system restore and during that process the computer crashed. When I try to boot to windows in every possible mode, I am always left with the dreaded blue screen of death.
View 3 Replies View Relatedi can only boot to MSDOs with floppy msdos bootup on A:. I want to install ubuntu 10.10 and completely erase HDD but the ubuntu disc won't bootup even when bios is set for cd only. This is older HP pavillion that I have retired but HDD scans out good so I thought i would run Ubuntu only and maybe put MS out of business but not having any luck with install. When booting from HDD error is system 32hal dll is missing or corrupt but HDD C: is 0 anyway. I just want to install so I can play with Ubuntu.
View 14 Replies View RelatedMy macbook pro stopped booting yesterday due to some file system corruption in the hard drive. I am able to access this drive through a linux live cd which I am using now but when I go to some folders it says "Could not enter folder /media/Macintosh HD/..." My question is how do I give myself the permissions to be able to access these files and transfer them to a network drive?
View 1 Replies View RelatedTrying to help brother whose computer quit working after he downloaded updates. Don't know Linux lingo but it looks to me like he has multiple flavors of Linux running: Gnome, ubuntu, xbuntu, kbuntu - probably more I've forgotten.
He knew nothing about computers at all and inherited a build-it-yourself computer kit that someone was throwing away. It came with a CD of Linux software. By trial and error he made it run and has managed to do some amazing things with photos and graphic design. But he downloads and launches EVERYTHING that suggests itself to him. Sometimes a thousand files at a time.
Now his machine boots but won't run any apps. It keeps giving him a message that he needs to "manually run" some "dpkg-something" but he doesn't know how to get to any sort of root or command prompt where he can enter a manual command. All he knows how to do is click icons. He's clicked them all. Now his computer is continually running screen after screen of programming language.
Is there any hope? Can we reinstall an OS without losing all of his files of graphics work? Which OS should he use on a fairly old and slow machine if his main (only?) use is graphic design?
I'm very new to Ubuntu. Today is my first day. Issue: I have a USB dongle on my Linux laptop, and I need to download and install WINE so that I can install the software so that I can the USB modem to connect to the internet. How can I download WINE on my windows computer and copy it to my Linux laptop so that I can install the dongle software?
View 3 Replies View RelatedI've lost some install disks which cannot be replaced and need to copy my entire /home/username/.wine to my laptop.
I already have installed wine on the laptop and it is the same version of Fedora (14) as is on my desktop.
Is it possible to mass copy the entire desktop /home/username/.wine, and copy it onto the laptop?
Do I do the copy as user or as root? I need to get everything, the system files registery and ProgramFiles etc. and then copy it on to the lap top with exactly the same permissions.
So I would, for example, type tar -zvcp allWine.tgz /home/username/.wine/*.*
I have a Dell Latitude D620 which came with Windows XP. I have just installed Ubuntu 9.10 on the laptop so it can dual boot but I can't connect to the internet.I have a dynamic IP allocated by my broadband service provider which I access by a wired Netgear DM111P router (not cable). It still works fine when booting up windows.I've read through lots of posts by others trying to find a solution as the 9.10 install has just been done and I've not changed anything.
My tentative assessment is the laptop, when running Ubuntu, is not communicating with the router as there seems to be no IP address allocated by the router.
Kde does not start after slackware 13.0 instalation. Mouse just stop and the computer freeze. When I type startx Kde try to start, but everything stop. Does anybody know what could be this ? What log should I look ?
View 3 Replies View RelatedI have an old pentium 4 with an ati card agp. 320mb ram. just for testing. i followed all the screen instruction and everything was installing well. then it say , remove cd and press enter to restart. i did. now it boot up fine , but at the end just a blank screen.
View 7 Replies View RelatedI am booting a computer with the server edition and I cannot even navigate the language menu. The keyboard works as I can access the BIOS and if I put in a new Keyboard, It acts exactly the same way. What are my options, If I boot with a live CD of the desktop edition, is there a way that I install the server from it? I dont want the GUI, I am learning so, I want it raw and as it should be if installed with the cd.
View 2 Replies View Related