I have a Toshiba laptop with windows 7. I installed wubi and all worked fine until I ran some ubuntu updates. Now the computer will not boot, what comes up is error: no such device: f53e513e-bfa0-4126-ab5c-8f7777505812. grub rescue> Is returns unknown command set returns prefix=(hd0)/boot/grub root=hd0
View 2 RepliesSo yeah I want to transfer my system to the real Ubuntu. Problem is I can't boot into my Wubi Ubuntu cause I lost boot.
View 5 Replies View RelatedI have recently discovered ubuntu and like it's elegance and simplicity and want to learn more about it "hands on". To this end I have tried to put it on one of my PC's running the Vista SP2 OS...When i try to install it with the CD the drive spins up then starts "hunting"..next the PC shuts down..black screen monitor.no KB or Mouse..the monitor flashes a box saying "power saving mode" then all is dead except for the power button being lit..I have to manually turn the PC off to recover...Next i did a D/L of wubi and rebooted as advised.Selected ubuntu on the BIOS and had the same final result as B4 with the CD. I have D/L and burned 2 CD's, one with my XP machine and the other with the Vista machine..Both CD's work as advertised on my XP machine (i did the "live" install) but not the Vista. The Vista machine is an HP with: AMD Athlon 64x2 3800+ CPU..3 GB of RAM..250 GB HDD. I do not like Vista ( i inherited the machine) it's a pain in the posterior. IMHO ubuntu and it's ilk are the way to go and i intend to do just that one way or the other.
View 5 Replies View RelatedI installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
I installed Xubuntu 9.10 with Wubi and it worked fine until a recent kernel update broke my install. I uninstalled through Windows and reinstalled Xubuntu 9.10 with Wubi with no apparent problems.When I look in C:ubuntudisks, root.disk, swap.disk, and the boot folder are both present. The C:ubuntudisksootgrub folder is empty; I don't know whether or not it should be that way.But when my computer starts, it just boots Windows Vista without displaying the menu asking me to select my OS.
View 3 Replies View RelatedI am dual booting win7 and Ubuntu 9.10 with wubi.
-If I don't select ubuntu, it will boot into win7.
I want to change it so I can go into ubuntu after 30SEC so I don't have to always select it.
I am using WUBI to run ubuntu.I upgraded to 10.04 from ubuntu 9 using the update option provided.On restart after the update,i get to grub rescue prompt.Here when i type ls i get the output as hd0 and hd31.I cannot login into windows because the option to select between windows 7 and ubuntu is not available anymore.
View 4 Replies View RelatedI'm running Windows and 9.04 in a dedicated partition on my HP DV1000 (32bit), and I would like to boot to a 10.04 Live CD to make sure that everything will work with the upgrade. But, no matter what I try (unetbootin USB, Linux Mint, CDs of both) I can't get the machine to boot to anything other than the HD.
I did a wubi installation of 10.04 on a Compaq CQ laptop and ran into the same problem. I went into the BIOS on both machines and I think I tried all the different settings, but no go. I must be missing something. Is working through the BIOS the only way to get one's machine to boot from a usb or optical drive, or is there another trick to it?
I just updated my ubuntu 10.10 installation inside windows (wubi) and after that I shut down my computer. Later on I switched it on again and was unable to boot ubuntu. Ususally I first get the 'Windows boot menu' and after i select ubuntu i get the grub menu. Now, when I select ubuntu in the windows boot menu I dont get grub after that but instead the computer restarts. Is there any way to fix this issue without reinstalling ubuntu.
View 2 Replies View RelatedI want a well maintained guide which shows how to dual boot windows xp and ubuntu 10.10 without wubi and not corrupt my Windows Installation.
View 4 Replies View RelatedI've been unable to do a non-Wubi install of U 10.10 desktop 32 bit. My setup:
HP p6240f , Intel Core2 Quad Q8300 2.5 GHz, 4 MB L2 Cache, 1333 MHz FSB
Currently, I have a clean install of Windows XP (updated) on my desktop. Previously, I used a clean install of Windows 7, but ran into the same problems below. My U install problems are:
1.) Live CD will not boot upon restarting PC. As per the U documentation web site (URL) , md5sums confirmed that proper .iso copy was downloaded and burned to CD. (However, see log file below for md5 error)
2.) "Installing CD boot helper" does not work. I receive the following error message: "Could not retrieve the required installation files", and it refers to a log file. An excerpt of the log file is below.
12-27 18:06 DEBUG TaskList: #### Finished get_metalink
12-27 18:06 DEBUG TaskList: New task get_file_md5
12-27 18:06 DEBUG TaskList: #### Running get_file_md5...
12-27 18:07 DEBUG TaskList: #### Finished get_file_md5
[Code].....
I gave up on XP - not the place for long sob stories - and decided to try Ubuntu. I know nothing, so I chose the 10.04.1 because it said stable... made a CD, took it to the problem computer, tried several times to load, then noticed that "Wubi" loaded from windows. I hunted down a 10.04.1 Wubi, and it seemed to read rather well. No error messages, told me to remove the disc. I did, told me to reboot. I chose ubuntu and it froze with the words :
Completing the Ubuntu installation:
For more installation boot options, pres 'Esc' now...
0
_
I waited, nothing. I put the CD in, nothing. Now what?
On my MS Vista 64bit machine, I installed Ubuntu through WUBI (some time in 2010) and was happily booting one or the other as needed. Then I added kubuntu-desktop (using Synaptic).Now, when I reboot, the Windows Boot Manager still offers Vista and Ubuntu as boot options. But Ubuntu, rather than boot, goes to a grub shell. I found a GrubHowto that includes "Manual boot into a Linux OS" - but it seems to suggest that clean Karmic installs use Grub2 and the Howto instructions apply only to Grub. I don't know if the WUBI install was Karmic or something older. I don't know anything about using grub manually.And I don't know how to get my (k)ubuntu back!
View 1 Replies View RelatedI recently did a Wubi install of 9.10 on my netbook that initially ran Windows 7 Starter. I wanted to speed up the booting process so I went into Windows and set the OS selection list waiting time to be 0 and the default OS to be ubuntu. I did this assuming that there is a way to force OS selection list to be brought up during boot; I think I was wrong.So now, I'm stuck booting directly into 9.10 (not even a full install!). Is there a way to either modify the Windows boot file to reset the selection list timer or to force the list to be brought back out?
EDIT: I should note that editing the grub files within the wubi install would only make changes to the GRUB loader, which has no effect on the actual Windows loader.
I've been running Ubuntu 10.04 AMD64 on our home theater PC through a wubi installation. Yesterday the system update installed a new kernel and today there is a problem booting the computer so I'm reluctantly using Windoze to type this. there isn't much information: the computer has always booted fine before the kernel update. When I select Ubuntu in the boot menu the screen goes black and the computer restarts. No error messages, no GRUB menu, just a blank screen before restart.
Computer: Dell Hybrid 140G, Intel Core 2 Duo T5800, 4GB RAM
I'm new to Linux, and i was playing around with wubi for some time, and now i made a fresh instal of 11.04 64bits, no problems so far! But one thing was change, the boot system. My computer is used by me and my daughter (7years old), and when i was using the wubi instalation when booting she only see Wyndows 7 and Ubunbtu, . Now with this fresh instalation, i think is grub o takes control, she have a hard time to try to enter in W7, because of all "offers" from their.
So my question is, can i change the boot system to w7 control (like with wubi)?
After clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies View RelatedI have a problem. Today I updated from 10.10 to 11.04 and it looks really cool. However, I also have Windows 7 on a different partition. When I restarted after I updated, GRUB looked different. Also, when I tried to boot to Windows 7, the screen would go blank (like it was restarting) and it would just bring me up to the GRUB menu again. I really need to get back onto Windows 7.
View 7 Replies View Relatedi have Karmic installed with Wubi inside a Vista NTFS filesystem. Yesterday i did an apt-get dist-upgrade and Karmic never booted again. It won't even show the grub kernel list, it just shows some really quick text that vanishes before i can even figure out what it is and then drops to some sort of grub shell and then i can't figure out what to do.
I could boot a livecd and mount my karmic install and everything seems fine, the filesystem is clean and all that. But how do i fix it so it can boot again?
Does anyone here know wtf happened? Was there a bad upgrade or something?
I have a Wubi 10.04 installation and I just did an upgrade and then I rebooted and then I got a message which just said 'error: file not found'. Then it doesn't do anything after that. I get no grub prompt or anything. I'm a newbie to Ubuntu so I'm not sure what to do.Is there a way I can repair the installation from windows maybe or what can I do because I can't even enter the command prompt.
View 2 Replies View RelatedWhat is a better way to start a dual boot with Windows 7 and Ubuntu 10.04, Wubi or LiveCD?
View 9 Replies View RelatedInstalled Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
View 4 Replies View RelatedWhen I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies View RelatedI have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
View 4 Replies View RelatedI was using dual boot (windows 7 and ubuntu 10.10) and it was going well. Couple of days ago I updated to Ubuntu 11.04 and everything was OK. Yesterday I cought some virus in windows, installed Microsoft security essentials which asked to update Windows. After update, dual boot is gone. It boots to windows directly with no option to choose between OS.
Quote:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ntfs
[Code]....
I have Ubuntu dual booted on the laptop I'm on, with Windows 7. I'm currently running 10.10. Is it safe to update Ubuntu to the latest version, despite it being on a dual boot? I'm not sure how it would work, but I imagine it'd be fine...I just wanted to double check first.
View 2 Replies View RelatedI recently upgraded Fedora 9 to Fedora 10 on a triple boot system (Fedora 9, Win XP and Ubuntu 8.04). The upgrade seemed to run fine until rewriting the boot loader, which failed. The old Fedora 9 entries remained. The Fedora 10 installation is found by Supergrub but attempting to boot generates the error:
Error 15: File not found
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
View 6 Replies View RelatedOk, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies View Related