Ubuntu :: Boot To Live Cd After Full And Wubi Installation?
Jun 29, 2010
I'm running Windows and 9.04 in a dedicated partition on my HP DV1000 (32bit), and I would like to boot to a 10.04 Live CD to make sure that everything will work with the upgrade. But, no matter what I try (unetbootin USB, Linux Mint, CDs of both) I can't get the machine to boot to anything other than the HD.
I did a wubi installation of 10.04 on a Compaq CQ laptop and ran into the same problem. I went into the BIOS on both machines and I think I tried all the different settings, but no go. I must be missing something. Is working through the BIOS the only way to get one's machine to boot from a usb or optical drive, or is there another trick to it?
I been using ubuntu wubi on my gateway notebook for a few months now and I am ready to clean windows all my computer and only use ubuntu. the question is do I have to reinstall everything from the ground up?? can someone please give me some tips! it will take me weeks to setup everything again
I am running Ubuntu in WUBI inside Windows, my first question is, can you do a full install to a new partition through the WUBI installation? Or would it be better to partition the disk, and just install Ubuntu, then deal with the MBR issue (been a while since I had a normal install, maybe the boot problems are gone?)? And is there any actual advantage to doing a stand alone install, while still dual booting Windows? Is there any gain from it versus the WUBI install I am running now?
I want to upgrade my 9.10 from Wubi to a full install (my 30 gigs is almost filled) without losing my files and settings(like my panel apps and options). but how?
I have developed a simple tool to easily uninstall any Ubuntu (or other Linux distro) from an Ubuntu live-CD.It works very well for any Linux installed on a separate partition.Now I am wondering if it is possible to add it the possibility to uninstall a Wubi installation.For the moment, I know how to detect a Wubi install (just need to detect a /ubuntu/disks/root.disk file).Then, all tutos I found use Windows tools, but this "How do I manually uninstall Wubi?" paragraph gives clues to do it from a live-CD :- Remove C:ubuntu and C:wubildr* : ok- remove Ubuntu from the Windows bootloader : do you know how to do this from a live-CD for Vista and Seven ?- remove Ubuntu from the registry : do you know how to do this from a live-CD
What is the easiest and/or safest way to migrate my Wubi 10.04 install to a full install? Currently, my Dell XPS M1530 is currently dual-booting Ubuntu 10.04 LTS and Windows Vista Home Premium, and I've decided after using Windows a total of around 4 hours over the past 6 months that I can probably let it go. So, I don't need Windows anymore and I believe I'm ready for a full install of Ubuntu. Though, I probably will wait for 11.04 to come out first.
A few ways I've thought of already are: 1) Find an external hard drive to put the Wubi files on. 2) Upload files to an storage website. 3) Temporarily put the Wubi files onto another computer (Windows). All these meaning I would then wipe my harddrive and install Ubuntu from a CD. And by "files", I mean Documents, Pictures, Downloads, etc.
EDIT: deleting all my applications, because OpenOffice.org won't reinstall on my computer due to dependency issues while attempting to install LibreOffice. So a fresh install would be nice.
I have recently discovered ubuntu and like it's elegance and simplicity and want to learn more about it "hands on". To this end I have tried to put it on one of my PC's running the Vista SP2 OS...When i try to install it with the CD the drive spins up then starts "hunting"..next the PC shuts down..black screen monitor.no KB or Mouse..the monitor flashes a box saying "power saving mode" then all is dead except for the power button being lit..I have to manually turn the PC off to recover...Next i did a D/L of wubi and rebooted as advised.Selected ubuntu on the BIOS and had the same final result as B4 with the CD. I have D/L and burned 2 CD's, one with my XP machine and the other with the Vista machine..Both CD's work as advertised on my XP machine (i did the "live" install) but not the Vista. The Vista machine is an HP with: AMD Athlon 64x2 3800+ CPU..3 GB of RAM..250 GB HDD. I do not like Vista ( i inherited the machine) it's a pain in the posterior. IMHO ubuntu and it's ilk are the way to go and i intend to do just that one way or the other.
I installed Xubuntu 9.10 with Wubi and it worked fine until a recent kernel update broke my install. I uninstalled through Windows and reinstalled Xubuntu 9.10 with Wubi with no apparent problems.When I look in C:ubuntudisks, root.disk, swap.disk, and the boot folder are both present. The C:ubuntudisksootgrub folder is empty; I don't know whether or not it should be that way.But when my computer starts, it just boots Windows Vista without displaying the menu asking me to select my OS.
I have a Toshiba laptop with windows 7. I installed wubi and all worked fine until I ran some ubuntu updates. Now the computer will not boot, what comes up is error: no such device: f53e513e-bfa0-4126-ab5c-8f7777505812. grub rescue> Is returns unknown command set returns prefix=(hd0)/boot/grub root=hd0
I am using WUBI to run ubuntu.I upgraded to 10.04 from ubuntu 9 using the update option provided.On restart after the update,i get to grub rescue prompt.Here when i type ls i get the output as hd0 and hd31.I cannot login into windows because the option to select between windows 7 and ubuntu is not available anymore.
I just updated my ubuntu 10.10 installation inside windows (wubi) and after that I shut down my computer. Later on I switched it on again and was unable to boot ubuntu. Ususally I first get the 'Windows boot menu' and after i select ubuntu i get the grub menu. Now, when I select ubuntu in the windows boot menu I dont get grub after that but instead the computer restarts. Is there any way to fix this issue without reinstalling ubuntu.
Currently, I have a clean install of Windows XP (updated) on my desktop. Previously, I used a clean install of Windows 7, but ran into the same problems below. My U install problems are:
1.) Live CD will not boot upon restarting PC. As per the U documentation web site (URL) , md5sums confirmed that proper .iso copy was downloaded and burned to CD. (However, see log file below for md5 error)
2.) "Installing CD boot helper" does not work. I receive the following error message: "Could not retrieve the required installation files", and it refers to a log file. An excerpt of the log file is below.
I gave up on XP - not the place for long sob stories - and decided to try Ubuntu. I know nothing, so I chose the 10.04.1 because it said stable... made a CD, took it to the problem computer, tried several times to load, then noticed that "Wubi" loaded from windows. I hunted down a 10.04.1 Wubi, and it seemed to read rather well. No error messages, told me to remove the disc. I did, told me to reboot. I chose ubuntu and it froze with the words :
Completing the Ubuntu installation: For more installation boot options, pres 'Esc' now... 0 _ I waited, nothing. I put the CD in, nothing. Now what?
On my MS Vista 64bit machine, I installed Ubuntu through WUBI (some time in 2010) and was happily booting one or the other as needed. Then I added kubuntu-desktop (using Synaptic).Now, when I reboot, the Windows Boot Manager still offers Vista and Ubuntu as boot options. But Ubuntu, rather than boot, goes to a grub shell. I found a GrubHowto that includes "Manual boot into a Linux OS" - but it seems to suggest that clean Karmic installs use Grub2 and the Howto instructions apply only to Grub. I don't know if the WUBI install was Karmic or something older. I don't know anything about using grub manually.And I don't know how to get my (k)ubuntu back!
I recently did a Wubi install of 9.10 on my netbook that initially ran Windows 7 Starter. I wanted to speed up the booting process so I went into Windows and set the OS selection list waiting time to be 0 and the default OS to be ubuntu. I did this assuming that there is a way to force OS selection list to be brought up during boot; I think I was wrong.So now, I'm stuck booting directly into 9.10 (not even a full install!). Is there a way to either modify the Windows boot file to reset the selection list timer or to force the list to be brought back out?
EDIT: I should note that editing the grub files within the wubi install would only make changes to the GRUB loader, which has no effect on the actual Windows loader.
I've been running Ubuntu 10.04 AMD64 on our home theater PC through a wubi installation. Yesterday the system update installed a new kernel and today there is a problem booting the computer so I'm reluctantly using Windoze to type this. there isn't much information: the computer has always booted fine before the kernel update. When I select Ubuntu in the boot menu the screen goes black and the computer restarts. No error messages, no GRUB menu, just a blank screen before restart.
I'm new to Linux, and i was playing around with wubi for some time, and now i made a fresh instal of 11.04 64bits, no problems so far! But one thing was change, the boot system. My computer is used by me and my daughter (7years old), and when i was using the wubi instalation when booting she only see Wyndows 7 and Ubunbtu, . Now with this fresh instalation, i think is grub o takes control, she have a hard time to try to enter in W7, because of all "offers" from their. So my question is, can i change the boot system to w7 control (like with wubi)?
i have Karmic installed with Wubi inside a Vista NTFS filesystem. Yesterday i did an apt-get dist-upgrade and Karmic never booted again. It won't even show the grub kernel list, it just shows some really quick text that vanishes before i can even figure out what it is and then drops to some sort of grub shell and then i can't figure out what to do.
I could boot a livecd and mount my karmic install and everything seems fine, the filesystem is clean and all that. But how do i fix it so it can boot again?
Does anyone here know wtf happened? Was there a bad upgrade or something?
I have a Wubi 10.04 installation and I just did an upgrade and then I rebooted and then I got a message which just said 'error: file not found'. Then it doesn't do anything after that. I get no grub prompt or anything. I'm a newbie to Ubuntu so I'm not sure what to do.Is there a way I can repair the installation from windows maybe or what can I do because I can't even enter the command prompt.
Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
When I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
