Ubuntu Installation :: Upgrade From 8.04 To 10.04 Not Succeeded

Sep 11, 2010

After the upgrade on this AMD Athlon Barton 2500+ system, root device not found.The Grub install had failed; the new grub.cfg file was non-existent. In the Grub folder there was only a env file.Succeeded in installing Grub2, but without the cfg file it didn't help any, of course.

Very disappointed that the new Grub install didn't succeed and that there is no 'repair' for such an event on the Live CD of 10.04.1.Had done a few upgrades, from 7.04 to 7.10 and to 8.04 without problems.Very surprised and shocked that an upgrade from one LTS to the following LTS does not work 'out of the box'

View 2 Replies


ADVERTISEMENT

Ubuntu Installation :: Synaptic Error : Not All Changes And Updates Succeeded?

Jul 15, 2010

I installed 10.04 and did the upgrades. After that I installed a few programs.Now when I try to install or uninstall something from synaptic it gives me this error at the end:

Code:
E: packagekit-backend-apt: subprocess installed post-installation script returned error exit status 2
I'm clueless as how to fix this. Can someone help me understand?

View 1 Replies View Related

Ubuntu Installation :: Error Messages On Updates: "Not All Changes Succeeded."?

Sep 25, 2010

When I do the routine updates, which come every few day, I get the following message.(Please see the attached image.)

View 3 Replies View Related

Fedora :: Install The 32 Bit Version And Apparently Succeeded?

Jul 13, 2010

I have done some searching around and now know that the 64 bit version of Wine is useless. I tried to install the 32 bit version and apparently succeeded. The problem is that when I open Wine File the .wine-x86_64 folder reappears. I don't even know where the 32 bit folder is.

I have tried
Code:
yum erase *wine*
but it does not seem to work. However this does.

[Code]...

View 3 Replies View Related

Programming :: Patch Command: Hunk #1 Succeeded At 25 With Fuzz 1

Oct 21, 2010

I am beginning to start to work with compiling and I get some confusing output adding patches to sourcecode (xosview-1.8.3). (The patch is for suppressing warnings while running the make command : deprecated conversion from * char to ** char ) Xosview compiles without the patch. The patch itself contains 17 files to add mostly const char instead of char. It is one single file containing also files in one subdirectory.
While running `patch < PATCHFILE.patch I had to copy'n'paste the filenames of the subdirectory to the terminal to keep it going. To get it going without much manual input I split it up for the two directories. I got the original patch and both splitted patches succeeding but with confusing output like :

patch unexpectedly ends in middle of line Hunk #2 succeeded at 78 with fuzz 1.

or just

patching file nfsmeter.h patch unexpectedly ends in middle of line # I splitted the original patch to every 17 files and this kind of output I get now at almost every patchfile. I downloaded patch source from debian
and running `pfind` (Puppy-linux speciality .sh) for search text in files showed off patch.c

Quote:
if (verbosity != SILENT)
say ("Hunk #%d FAILED at %s.
", hunk,
format_linenum (numbuf, newwhere));
} else {
if (verbosity == VERBOSE
[Code]........

As you can see the patch is working but what would I have to add to the patch? I added more newlines , added all lines to close a "{" if the patched line was inside ( also added "}" ), adjusted the path at the diff -uraNd /PATH/ -line, even deleted the diff line.

View 8 Replies View Related

Networking :: OpenVPN Repeats Message: TEST ROUTES: 0/0 Succeeded Len=1 Ret=0 A=0 U/d=down - Connect To Server

Jun 7, 2011

I try to connect to my server (whose IP is x.x.x.x below) from my laptop. I have no idea why openvpn client won't work this time. It works fine in win7 before. I re-installed openvpn but it doesn't work neither. Then I searched for this issue, find that it is possibly caused by disabled DHCP Client service. I checked, and found it was enabled. Still won't work after restarting dhcp client service.

Basic Info:
OS: Windows 7
OpenVPN client: openvpn-2.2.0
DHCP Client Service started.

The following is the log during connecting:

Code:
Wed Jun 08 01:55:16 2011 OpenVPN 2.2.0 Win32-MSVC++ [SSL] [LZO2] built on Apr 26 2011
Wed Jun 08 01:55:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Wed Jun 08 01:55:16 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Wed Jun 08 01:55:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
[Code]....

View 1 Replies View Related

Ubuntu Installation :: Upgrade From 10.04 To 10.10 Error "Could Not Calculate The Upgrade An Unresolvable Problem Occurred While Calculating The Upgrade"

Feb 12, 2011

I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:

* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu

If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade

View 1 Replies View Related

Ubuntu Installation :: Upgrade Disaster - Warning "installation / Upgrade Should Not Be Interupted" - Computer Froze Up

Jun 1, 2010

While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.

View 3 Replies View Related

Ubuntu Installation :: Beta 10.04 Upgrade - Upgrade Manager Did Not Give The Option

Apr 16, 2010

I am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.

View 2 Replies View Related

Ubuntu Installation :: Upgrades Held Back - Two Packages - Grayed Out And Do Not Upgrade In Upgrade-manager

Mar 29, 2010

I'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.

If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager

The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.

View 1 Replies View Related

Ubuntu Installation :: Upgrade 10.04 Failed: Couldn't Download The Upgrade?

May 16, 2010

I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.

View 1 Replies View Related

Ubuntu Installation :: Update, Upgrade And/or Dist Upgrade?

Jan 18, 2010

I am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:

sudo apt-get update
sudo apt-get upgrade?

If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?

View 3 Replies View Related

Ubuntu Installation :: Upgrade Error W/ 10.4 LTS / Could Not Calculate Upgrade?

May 9, 2010

doing an upgrade from 10.4 to 10.4 LTS and got this error:

Could Not Calculate Upgrade

An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.

This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu

If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.

View 3 Replies View Related

Ubuntu Installation :: Upgrade To 10.10 Using Commandsudo Apt-get Dist-upgrade?

Oct 13, 2010

When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.

[Code]...

View 2 Replies View Related

Ubuntu Installation :: Unable To Upgrade From 10.4 To 10.10 - Could Not Calculate The Upgrade

Nov 14, 2010

I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.

View 2 Replies View Related

Ubuntu Installation :: Run The Upgrade Manager, The 'Distribution Upgrade?

Mar 14, 2011

I'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.

The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.

View 3 Replies View Related

Ubuntu Installation :: Upgrade From 9.10 To 10.04 LTS - No Upgrade Message

May 26, 2010

I'm trying to upgrade from 9.10 to 10.04 LTS I've followed [URL] Everything is updated. But, i don't receive the message "New Ubuntu release..." Will I have to download the entire DVD?

View 7 Replies View Related

Ubuntu Installation :: Dist-upgrade Won't Upgrade Me For 10.04 To 10.10?

Dec 4, 2010

I would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?

View 4 Replies View Related

Fedora Installation :: Upgrade From 8 To 12 - No Upgrade Root Found

Jan 27, 2010

I tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?

View 1 Replies View Related

Fedora Installation :: Can't Click On The "Upgrade" Button To Begin The Upgrade Process To FC14?

Jun 27, 2011

Trying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.

Is there any other way to do this besides downloading the DVD and installing?

View 8 Replies View Related

Installation :: Upgrade By "update-manager-core" With The Command Sudo Do-release-upgrade

Mar 30, 2010

I'm now using Ubuntu 9.04 and I think of upgrading it to version 10.04 (when it shall be "stable").I'd like to know if I am supposed to modify /etc/apt/sources.list with the name of the new version even though I upgrade by "update-manager-core" with the command sudo do-release-upgrade

View 1 Replies View Related

Ubuntu Installation :: Can't Upgrade - Error "Could Not Calculate The Upgrade"

May 29, 2010

I can't upgrade. I get: Quote: Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'skype-common' is marked for removal but it is in the removal blacklist.

This can be caused by:

* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu

This is most likely a transient problem, please try again later. I tried again several times in different days and it is the same. I have 10.4 recently updated from my original installation of 9.10. I think it was not a pre-release, I did it automatically from the website and it took a long time. As far as I know, all I have installed is official, except perhaps Skype itself.

View 7 Replies View Related

Ubuntu Installation :: Upgrade Installation Error - Could Not Install '/var/cache/apt/archives/libc6_2.10.1-0

Mar 23, 2010

I was trying to update from 9.04 to 9.10.

During the installation, I kept getting tons of errors. Finally something came up saying that I had to abort the installation and it did some stuff. I tried running an application, but I got an error. So I restarted the system.

The normal screen came up where I had to choose the Ubuntu stuff (I'm new to Ubuntu) in the box. I noticed that it had gone to 8.10... which I had earlier before installing 9.04, which went great. So I chose the first on and the system failed to start. I rebooted and tried all the other options, but they all had errors. Now I'm booted to Windows.

I installed Ubuntu from a CD I created. But it is now outdated because it is 8.10, and I have already upgraded to 9.04. 9.04 to 9.10 is where stuff went wrong.

View 1 Replies View Related

Ubuntu Installation :: Upgrade Freshclam To 0.96.3 - WARNING: Your ClamAV Installation Is OUTDATED

Oct 9, 2010

When i run $ sudo freshclam I get this message ClamAV update process started at Sat Oct 9 12:21:22 2010 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.96 Recommended version: 0.96.3 DON'T PANIC! Read http://www.clamav.net/support/faq main.cvd is up to date (version: 52, sigs: 704727, f-level: 44, builder: sven) daily.cvd is up to date (version: 12114, sigs: 138436, f-level: 53, builder: sven) bytecode.cvd is up to date (version: 80, sigs: 10, f-level: 53, builder: edwin) Since I am a beginner i don't know how to upgrade freshclam as $ sudo apt-get upgrade doesn't work. Guessing I may have to download the package and install manually just thought I'd ask before doing that.

View 4 Replies View Related

Ubuntu Installation :: Boots To Grub Prompt After Installation Upgrade

Jul 10, 2010

I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?

View 8 Replies View Related

Fedora Installation :: 10 Upgrade / Installation Failing On Presario F700 Laptop

May 29, 2009

I've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -

1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm

2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm

im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.

View 3 Replies View Related

Debian Installation :: Feed Apt-get Upgrade The Original Installation Cd-rom?

May 17, 2011

Is there a way to get rid of the need to feed debian apt-get upgrade the original installation cd-rom? I'd like to have all on the hdd and point there in order to avoid having to take the cd-rom along.

View 7 Replies View Related

Fedora Installation :: Upgrade 10 To 11 / After Installation System Is Not Booting?

Jun 17, 2009

I try to install Fedora 11 from DVD BUT after installation system is not booting. Windows XP is a 1st OS is already installed in my system.

View 1 Replies View Related

Fedora Installation :: Tweaking Preupgrade To Do An Installation Instead Of An Upgrade?

Nov 19, 2009

I was wondering if there was an easy way to do a fresh install from an old Fedora without using any media ? Maybe there is a possibility to boot the netinstall.iso from grub ?Or tweaking preupgrade to do an installation instead of an upgrade..

View 1 Replies View Related

Ubuntu Installation :: Upgrade From A 32-bit Installation To 64-bit On 10.10

Nov 18, 2010

Is is possible to upgrade a 32-bit install of 10.10 to 64-bit over the network? Basically, I want to avoid downloading the installation media and doing a fresh install. I have seen people talking about this back in 2005, where the conversation concludes that you should just do a fresh installation. It seems like it should be pretty easy to just upgrade the kernel and userland of a 32-bit installation to 64-bit packages.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved