Is there a way to get rid of the need to feed debian apt-get upgrade the original installation cd-rom? I'd like to have all on the hdd and point there in order to avoid having to take the cd-rom along.
View 7 RepliesI just did a fresh install from 8.04 to 10.04 with separate "/" and /home partitions. I really wanted a new 10.04 system to start from scratch and rebuild it again & differently. Instead I got a really messed up system. Is there any way to change it to a fresh new 10.04 install. That nothing has been added to yet?
This is very important because on 10.04 my video card won't handle all the mods that I had on 8.04 and my system freezes very soon after I log on.
What is the simplest way to combine an original installation CD with several hundred additional packages that I have downloaded since the installation? My goal is not to waste future bandwidth downloading packages I already have downloaded. Bandwidth has costs both in time and money.
Background Recently I started experimenting in earnest with Debian Lenny in VirtualBox. I am new to Debian but not Linux based systems. I have seen enough the past several days with my experiments that I would like to migrate from my current Linux based system to Debian.
I installed the Debian 5.03 KDE CD to a virtual machine. In the past several days I have downloaded and installed several hundred packages since the initial installation. I have encountered no major hiccups along the way.
For future use and safekeeping, I copied all of the downloaded packages from /var/cache/apt/archives to a different directory. To become more comfortable with the Debian installation process, I want to repeat the installation several times using the original 5.03 KDE CD --- and all of the subsequently downloaded packages.
As I am new to Debian I am looking for advice and instructions for the simplest way to perform these reinstallations. I would like to perform them without any internet connection. If I understand correctly, I can copy the additional packages to a DVD and then use apt-cdrom to add the disk to my sources.list. Then I should be able to 1) use the Debian 5.03 KDE CD to perform the initial installation, 2) install the additional packages manually. If I understand correctly, something like dpkg -i * should work with the additional packages? Doable?
The "common sense" way is to somehow merge the original Debian 5.03 KDE CD with my additional packages to create my own personal Debian 5.03 KDE Plus DVD for my personal installation use. All I would want is to merge the downloaded packages into the original CD to create my own installation DVD. Nothing fancy or dramatic. Being new to Debian I don't pretend to understand the Debian Installer mechanism. Yet I can tell from the original CD image that I need to merge my additional packages into the pool directory.
I found the wiki how-to for simple-cdd. I started to run the app but stopped because I was unsure how much bandwidth the app is using. The simple-cdd tool needs internet access, but is simple-cdd downloading all the deb packages again? I don't want any of the installed packages to be re-downloaded when I already have them at hand. I'm not comprehending the how-to very well or the various options. I also want to perform a complete installation without an internet connection.
A few days ago I installed my first Linux product, which is Debian 6.0, and I installed the GRUB booting device on my main boot record, as it was suggested that it was a harmless step to take. Unfortunately, some quirk in my system made GRUB believe that I had XP when in fact I have Vista, so the options I have now are to boot Debian or to boot XP which is not on my computer. In other words, I have to get rid of GRUB now, but I'm realizing that he's not such an easy customer to kick out. I have moved my Linux installation to another drive, but the old GRUB always stays in place, and my Vista is stuck there frozen for eternity. So after considering all kinds of possibilities, I have come to the conclusion that the easiest way to restore my original boot record would probably be to find its backup copy that I assume the installation program made, and to copy it back into the right address at the beginning of the disk. I don't have the Vista recovery CD, so I really have to do this manually. So now my questions are these: did the installation program make a copy of the boot track, and if so, where did he put it and under what name, and finally, what command can I use from within the Debian terminal, which is now my only tool left, to copy the content of thesaid file into the first 512 bytes of the hard drive? I know that would be a simple matter for any serious geek, I guess I must be a little rusty. Anybody feel up to it?
View 9 Replies View RelatedThey were controlled by BIOS for start-up without problem.Just wiped out Fedora and installed Ubuntu 9.10 64bit. During installing GRUB I saved it on Master, IIRC.Now Ubuntu and Vista startup are controlled by boot loader. I have to start Ubuntu first and on kernel selection select (loader)(on/dev/sdb1).Then Vista starts.It works.How can I restore to its original setup?Their booting is controlled by BIOS.
View 8 Replies View Relateddear the Admin(s) and all of the members
suppose that we wanna install a program, so we must do this : sudo apt-get install program_name after installing that file, yeah indeed we can run that program, but where can actually we find the original-downloaded file in our ubuntu?
i upgraded to ubuntu 9.10 from 9.04 today .but after upgrading so many errors crept in .
and these are following ..
1. Original login screen of ubuntu 9.10 is not being displayed.
2.By mistake i removed volume control and network connection applet from upper pannel.so can any one tell me how to re organise the pannel...and get back those two applets or can any one tell me how to completely recover the upper pannel.
im running ubuntu 10.04 since Beta, using a couple of external packages. Since the new release I would like to go back to the original packages in a simple way, the problem is that this particular one (xorg-edgers) has so many dependencies that it is impossible to go back from synaptic.
View 1 Replies View Relatedi'm trying to install ubuntu on a sony vaio. Unfortunately i cannot boot from a cd on which i have burnt the .iso file of ubuntu. The only way i managed to install ubuntu was by creating a usb bootable stick, but here also that doesn't work so well. My workaround was to use virtual clone drive which is freeware to simulate a cd rom in windows and get the iso file started. By leaving the bootable usb stick in the computer in this way it worked...
So in the end i have grub and can load ubuntu and win xp, but then by trying to format the harddrive i kind of messed things up and had to reinstall windows. Because the DVD drive only reads original cds. So from there i will attemp to reinstall ubuntu again. But how can i get rid of win xp afterwards ? If that CD Rom would only read burnt cds or if it would habe been possible to boot from usb then i wouldn't have this trouble.
I've been using Ubuntu for a couple years, and have really enjoyed the experience. Recently though, I also felt like installing Arch Linux onto my laptop which already had a Vista/Ubuntu 10.04 partition. In doing so, I lost access to the Ubuntu partition on my hard drive. The Arch linux grub had replaced the Ubuntu grub.
So the main question is, does anyone know how I could re-access or re-install the original Ubuntu grub? If not, then can someone help me with adding a boot option in Arch's Grub? I've already tried some things, though obviously, none have worked so far.
I installed F9 for a friend. She wasn't getting any sound. I ran aplay -l, but got no sound card listed. I ran lspci -v, but got no sound card listed. However,the output of lspci -v said the computer had a particular motherboard. I Googled for it and was told it had an onboard sound card. That led me to the package called realtek-linux-audiopack-4.06a, which I installed. It included an installation script, which I ran.
The script didn't work to compile various files it was supposed to, but it did work to delete various files from my friend's system. Here are the bits of the script that removed files:
echo "Remove old sound driver"
if [ -d /lib/modules/$KERNEL_VER/kernel/sound ]; then
rm -rf /lib/modules/$KERNEL_VER/kernel/sound/pci > /dev/null 2>&1
[code]....
In the result, the failure of the compilation didn't matter, because lspci -v lied. She didn't have the motherboard shown, but a different one without an onboard sound card. Of the files deleted by the script.
I was able to reinstall libasound.so.2 and libasound.so.2.0.0, but I haven't yet tried to reinstall the other ones deleted by the script. Now, I want her to buy a sound card, but I'm afraid it won't work unless all the deleted files are reinstalled. I'm looking for guidance as to how I can reinstall the files deleted by the bits of the script I set out above, without completely reinstalling Fedora.
I installed Ubuntu to a flash drive and it worked all dandy like. However, on other computers the audio doesn't work, neither can I install a driver for the graphics card to use effects and (at least so it seems to me) run 3D games. Is it trying to use the same hardware that it did on the first computer I used and therefore hasn't installed the right stuff?
EDIT: I can 'play' music, so I think the codecs are fine, but no audio comes out, so I'm thinking it must be a driver problem.
EDIT2: Apologies, I checked the "Comprehensive sound problems solution guide" and was able to fix the audio simply by unmuting the speakers. However, the graphics problem remains.
One other tid bit that might be relevant is that the first time I booted up on a different computer it did tell me (in different wording) that the graphics might have trouble because it was set up for a different hardware system, so I told it to set up a new configuration and that seemed all dandy.
I have been upgrading Ubuntu as its new distributions are released every six months regularly since quite some time now. Is there a way I can find out which was the original installation version that I first installed after I formatted my disk. I mean as far as I remember I have been using this state of my Ubuntu since 8.04 and have been upgrading since then, but I am not sure.
View 4 Replies View RelatedI had installed Ubuntu 10.10 on a W7 OS, as a dual boot. I have removed Ubuntu, and now have that space as "free space". Between the original partition (c:) and the free space, there is a partition that contains the laptop mfg's factory image. I want to recover that free space back to the original c: partition. I was reading about GParted, but do not want to attempt anything until I have some expert advice.
View 1 Replies View RelatedFirefox auto update keeps failing so...I need help locating the original installation location.
I tried downloading the update and using archive manager to open rather than save, but still it wanted to save. Now I can't find the location it selected.
I want to locate the downloaded saved and delete the new files, to conserve space.
And I need to learn how to force an Automatic update.
I found a folder named firefox and another firefox 3.0 System will not let me delete / move to trash.
I want to update to latest version. Don't want to remove the original and lose all my bookmarks
KVM virtualizer 33 bit
Guest - Windows/Linux 32 bit
Host - Debian 5.04 32 bit
AMD X2
I'm curious to know whether it is possible to upgrade the host to 64 bit. This is a virtual machine. I'll install 64 bit new guest on it.
I made search on Internet. My findings are as follows;
Upgrading Debian From i386 To amd64
AKA Upgrading Debian From 32-bit To 64-bit
http://teddyb.org/~rlpowell/hobbies/debian_arch_up/3
[Code]....
I have a laptop with 2 x different versions of Ubuntu installed as follows:
Ubuntu 10.10 on a partition; and
Ubuntu ultimate edition gamers (based on ubuntu 10.10 I believe).
I've only recently installed the gamers edition as a dual boot to see what it looks like. Now I've had a play around with it I've realised that I don;t really like it.What's the quickest/easiest way of reverting back to my original ubuntu 10.10 as a single boot? I don't want to re-install 10.10 - I was hoping I could delete the gamers edition to get back to my original single boot 10.10.
After one year of squeeze use without problem (and without upgrade) on a laptop and I decided to upgrade everything today. During the upgrade, I was asked what partition grub should handle. There was 2 choices /dev/sda and /dev/sda1. I checked only the last one and this is I think the source of my problem.
Now restarting the system, grub fails and reports
Entering rescue mode... error: the symbol `grub_xputs` not found and leave a useless prompt grub rescue>
I don't have a rescue cd at hand right now. I have a usb key with some old version of eeebuntu (my laptop is not a eeepc) and surprisingly I can boot on it.
I am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
View 14 Replies View RelatedI have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
View 6 Replies View RelatedA week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
Today I saw that there was an update available for my LAMP server that involved BIND.
So after I ran an apt-get upgrade i got the following big stack of messages ending sadly with error and I cannot upgade the of "fix" the system after that. Any Ideas? code...
I upgraded one of my Squeeze installations to Wheezy, but after selecting it in grub, nothing is displayed on screen: no CLI and no GUI. I tried Ctrl + Alt + F[1-7] and I got nothing. My laptop is Acer Aspire 7715Z. I am attributing this to module as there seems to be disk activity, but without a screen, I cannot be certain.
View 14 Replies View RelatedWhile upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedRunning Debian Stable AMD-64
Attempting to install valgrind from Synaptic Package Manager, I get a set of error messages: Packages held back? Broken? etc.
apt-get update; apt-get upgrade report 0 packages held back.
Synaptic Package Manager, clicking on "broken" lists no broken packages.
I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
View 8 Replies View Relatedis it possible to simulate upgrading a Squeeze installation to a Wheezy or Jessie installation, on a OVH server ?I would like simulate upgrading server, and if not problems, upgrading in real time.I don't do that manipulation, and I don't do mistakes on a production server.
View 2 Replies View RelatedI upgraded my laptop from Debian Wheezy to Jessie the other day, and just as before my wifi auto-connects to my router, and I can "ping http://www.google.com" just fine, but only for like a minute. Then the Internet access dies, but I'm still connected fine to my router, and I can ping its IP address. If I connect to the router through cable / eth0 everything works just fine, and I have full Internet access.
I assume there is something wonky with how ip address is assigned after the upgrade, how can I fix this, or trouble shoot further?
(I run Gnome desktop, with network manager).
I have an asus eee 1015px, which was running dualboot windows and wheezy with no problems (except the browsers seeming to take up a lot of CPU). Today having backed up everything, I wanted to upgrade to jessie. URL...
Everything seemed to be progressing fine, no strange messages, it took 1 hour for
Code: Select allapt-get upgrade
but maybe that's normal. However, then when I did
Code: Select allapt-get dist-upgrade
It froze at 17.30 with a weird screen. The sort of thing you never want to see on an install, a sad face and blocks instead of text.
pic: URL...
Then it moved on and gave a readout, which seemed pretty ominous
pic: URl...
It then moved and gave a readout, hanging again:
pic3: URl...
Now it seems to be in loop, moving on every 15 minutes or so but always ending up with the same screenful of text shown in the foto below, which ends with the last line reading like this:
Code: Select all[17798.587776] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
or later
Code: Select all[20209.229273] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
This pic shows the full screen: URL....
This is baffling for me I'm not very experienced with debian.
I have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.