I have a laptop that runs Karmic. I want to do the upgrade to 10.04; however, when I use the update utility to update, I do not get the upgrade button to appear.I have checked settings and I should receive upgrade offers on long term supported upgrades to Ubuntu.
View 2 RepliesTrying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
The sound is an onboard Realtek AC97 chip on my motherboard. It worked absolutely fine on my 9.04 Jaunty setup. My machine is dual boot with Windows XP and the sound is fine on XP, so it's not a hardware issue. Karmic seems to think there is no audio device present at all, which is obviously not the case.This is an AMD 64-bit machine running the x64 edition, although I doubt that has anything to with the problem. Everthing else in the installation went perfectly and the GNOME desktop seems significantly quicker too.
View 9 Replies View Relatedi used the Update Manager to upgrade from 9.04 to 9.10.. then it said:
NO VALID MIRROR FOUND
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date.
Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'jaunty' to 'karmic' entries. If you select 'No' the upgrade will cancel.
I choose yes, then is said that there's something wrong with the network I'm connected to..then it closes..the upgrade failed.
I'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
View 3 Replies View RelatedI can't upgrade from Karmic to Lucid,If I try to use the update manager I get a message that says "Can't download release notes. Check your Internet connection". I've tried changing the repository and I get the same message, but I can log in to the Internet, and download and install any program from the repository. I also get regular updates for Karmic so the repository is fine.I tried the command line
Code:
~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando �rbol de dependencias
[code]...
When I recently upgraded my desktop to Karmic, my postgresql 8.3 no longer starts. I've got data in 8.3 that I need, but now no way to access it. Karmic upgrades to Postgresql 8.4, but leaves 8.3. Problem is, I can't seem to start 8.3 no matter what I do (there's no error message. I even tried removing 8.4 entirely--without effect. When I try to start 8.3 (using command line or boot-up manager), there is no error message, either in system logs or in the postgresql log file. There is also no indication of an active postmaster in ps aux or anything listening to postgresql ports in nmap (for that matter, seems there's nothing listening even with 8.4 activated).
I could try to 'upgrade' my data cluster to 8.4. Never tried that before and am concerned about possibly losing data. Also, I made a load of tuning adjustments to 8.3 that I'd have to replicate with 8.4. I'd rather stay with 8.3, if possible. There are also two pieces of software, postgresql-common and postgresql-client-common, that presumably allow one to run two versions of postgresql simultaneously. Maybe this stuff is even the source of my start up problems. No idea where to learn how to use this software, and, esp., whether this would solve the 8.3 start problem.
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Lilo is installed in the MBR of /dev/sda
sda1:
File system: ext3
[Code]...
I was so impressed by the screen-shots of 10.04 LTS that i wanted upgrade via the update manager( am using karmic 9.10).Everything went well with downloading the new packages till the point of installation of downloaded packages. Halfway through the installation power went off and when i restarted the system it was stuck at some point with the message
Code: mount: nothing to mount in /dev or something like that. Then i restarted the system in recovery mode and ran "dpkg" to fix broken packages hoping it would fix the issue.It did to some extent that i was type the problem here through the affected system.
The problem is i couldn't send the crash report the first time around and i can't get hold of it now.My system is somewhere between karmic and lucid ("About Ubuntu" shows as karmic and System Monitor shows it as lucid").So i how do i get a clean installation of lucid?
I did an upgrade on my system yesterday. After the completion of the upgrade on restarting the system the computer enters tty1 mode straight without giving me the GUI login screen making it difficult for me to work. The question does now is what could have caused this to happen ? Have i gottten something wrong somewhere?
To switch to tty7 mode i hit the key crtl+alt+7 but it gives an error message about an unknown user even after login in with my username and password on tty1. Start the computer on recovery mode and selected the option correcting broken packages and it produced a result requiring me to download some new packages. I have a huawei e1550 modem which i use to browse in Nigeria. I want to know how i can connect to the internet on the tty1 after insertion of the modem so i can download the necessary packages it requested on issuing dpkg command
I'm on a fully updated and upgraded 9.10, and when I do update-manager -d, I don't get the button to do an upgrade to 10.04! What could cause this? I've tried the -d, -c, --check-dist-upgrades, --devel-release, -p, --proposed, and --dist-upgrade. I'm completely up to date on 9.10, but I want to upgrade to 10.04!
View 7 Replies View RelatedI am currently using 10.04 and I want to upgrade to 10.10 but no upgrade button is appearing on the update manager. I had already installed all updates and the settings was already changed to show normal distribution releases.
View 1 Replies View Relatedusing update manager, i allowed my karmic desktop at work to begin the upgrade process to lucid on friday afternoon... i ran out of time, and headed home for the weekend. somewhere along the process, the screen locked. after arriving back at work this morning, i cannot unlock the screen, or even switch users. other threads in this forum seem to indicate that i should've aborted the upgrade, but... i didn't know enough to anticipate problems, and i guess i assumed that given the lengthy estimate to complete the upgrade, i could just pickup the process again on monday.
in any case, cycling the power didn't help, so i downloaded the iso, and have booted to the 10.04 'trial'. i was hoping somebody could help guide me through resetting a password on the on-disk os from the live cd... i'm ok with reinstalling if i can preserve my account's configs & prefs.
I just upgraded a Ubuntu Desktop 64bit system from Karmic (9.10) to Lucid (10.04). There were several PostgreSQL 8.3 clusters running on that machine. After the upgrade, postgresql was not able to run anymore.
The package postgresql-8.3 was marked "rc" in dpkg -l I was not able to re-install PostgreSQL 8.3 because of a mismatched dependency. There was no warning. I guess i should have read the release notes, which i didn't. There should have been a warning before it was too late to turn back and upgrade postgresql to 8.4 first. I don't see how this is supposed to work, ever.
I'd like to know if this would be considered a bug, if it is known already and how to correctly file this bug correctly if appropriate (ubuntu-bug ?)
if this is covered elsewhere. Could not find it (could be being blind) If I upgrade fro 9.10 to 10.04 LTS will I lose
1. My Gnome panel settings
2. My compiz fusion settings
and
3. Will EnvyNG still be able to manage m,y Nvidia drivers OK?
I realize there is always a risk with an upgrade but I was just wondering what you all thought the chances were that I may lose these settings.
Can not upgrade An upgrade from 'karmic' to 'maverick' is not supported with this tool.
View 1 Replies View RelatedI currently use Karmic Koala (9.10) and want to upgrade to Maverick Meerkat (10.10). The thing is that Update Manager allows me to upgrade only to 10.04 (Lucid Lynx) but I cannot upgrade to Lucid Lynx because of a bug which freezes my keyboard and mouse. Also, upgrading first to 10.04 and then to 10.10 is quite time consuming. Can I upgrade directly to 10.10 from 9.10 without 10.04 acting as a mediator?
[URL]
I'm a newbie to ubuntu and I only used ubuntu less than a month, and I really like it. I would like very much to upgrade my ubuntu jaunty to ubuntu karmic but I have several concerns. If I choose to upgrade via update manager: 1. Will I lose my compilers and configurations? For example, some of my programs in current ubuntu are using gcc 4.3 and g++-4.3. I know that Karmic uses higher version of gcc and g++ and I have installed these programs in higher version of gcc and g++ and I got some problems. I would very much like to stay with my current compilers and configurations. I mean, do have to install all these previous version of compilers when I upgrade to Karmic? 2. What about my data in my home folder? Will it be erased? 3. What about my data in programs such as firefox? Will it too be erased? 4. What will happen to all third party software if I upgraded to Karmic?
View 9 Replies View Relatedi have Karmic installed with Wubi inside a Vista NTFS filesystem. Yesterday i did an apt-get dist-upgrade and Karmic never booted again. It won't even show the grub kernel list, it just shows some really quick text that vanishes before i can even figure out what it is and then drops to some sort of grub shell and then i can't figure out what to do.
I could boot a livecd and mount my karmic install and everything seems fine, the filesystem is clean and all that. But how do i fix it so it can boot again?
Does anyone here know wtf happened? Was there a bad upgrade or something?
I have an HP Mini 210 and I recently performed an Upgrade from 9.10 to 10.04 and noticed that the netbook is much more noisy now (and can get very warm). I am not sure wether is the fan or the hard drive spinning. I did a "top" but no process was high consuming. I also thought that maybe compiz could be responsable for it, so I disabled all the visual effects, but still no change.
View 5 Replies View RelatedMy Dell Latitude 2100 worked fine with the pre-installed Ubuntu 9.04. I upgraded to 9.10 and the touchpad stopped working. Restored to factory condition and it again worked fine. I re-did the upgrade, this time asking it not to delete the obsolete items.
View 3 Replies View Relatedwhen i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies View RelatedHow did it work out? What model machine are you using?
Just wanted to get some idea of stability/functionality.
After upgrading my 64bit 9.10 install to lucid, KDE went poof. I am presented with the login screen, and after supplying my credentials the screen goes black and all I am left with is a mouse pointer.
According to ps kded4 is dead (zombie). kdm.log also indicates a problem with ibus. I installed the "ibus" pkg, but didn't resolve it. Attached is an excerpt of my kdm.log, I can't really find useful information in syslog/dmesg/messages. The system is up-to-date and I've tried starting with a clean user account as well as removing the .kde directory.
I upgraded to Lucid from Karmic.Im now using gnome but would like to get back to KDE. Sadly it seems that even with kdm and plasma-desktop packages installed, I run into a problem at login.If I choose from the downwards facing arrow on the botttom left of the screen, and pick "KDE".Then when I log in, it shows the first icon (a hard disk), goes black and plunks me back on the login screen.This is a Karmic>Lucid upgrade process and I wonder if something got borked in the process.
View 4 Replies View RelatedAfter i upgraded to karmic i experienced that the sound of spotify was at times strange. When i started a new song there was some strange plucking sounds, can most be understood as the sound a old LP-player makes when there is dust on the record. Not much but more than enough that I can hear it and wish it wasn't there. After some time of playing the songs sometimes was totally distorted by "disturbance" and it became impossible to even hear that there was a song there. Like when you are out of reception of a radio channel.
I did some research and upgraded to the wine1.2 with "custom" pulsaudio drivers. Then the total distortion was gone, but the, always present, plocking sound still was there. I have tested adjusting PCM volume, have some volume on mono, upgrading to newer pulsaudio drivers. The same problem is when ever my dear computer i producing sound. Spotify,firefox, rythmbox and mplayer. I can't see any answers after spending some time on google. I hoped i could fix this without deleting and removing pulsaudio.
Anyone knows the workaround for Quote: Input Signal Out of Range Change Settings to 1440 x 900 - 60Hz
View 9 Replies View RelatedJust upgraded to Karmic using the update manger. After the update, sound is no longer working. When I go to system>preferences>sounds and go to the Hardware tab it says there are no devices to configure.
View 5 Replies View RelatedI searched through a lot of threads on whether its safe to upgrade from a working Karmic install to Lucid via the upgrade manager. I found a few threads from around 1 month ago where some said it worked, others said they had problems with grub etc.
Does anyone know the current status of this? I would like to upgrade to Lucid but I don't know if its safe. Would it be better to use an install CD instead of the upgrade manager? Do I need to manually install grub rather than let the install program do it? (I think the upgrade manager doesn't give an option it just installs grub after the upgrade)
I recently upgraded from 9.04 to 9.10 on an IBM Intellistation Z Pro (64-bit).Install went smoothly.Upon restart, everything works fine up until the log-in screen. The normal hardware checks all run and the new white Ubuntu symbol appears but when it switches to the log-in screen, a "No signal" message appears on the display and the green power light goes orange.
I can still log-in remotely from another machine and access all the files and drives, run jobs etc., so the machine did start-up properly, it is just an issue with the display.