Ubuntu Multimedia :: Sound After Upgrade To Karmic?
Jan 5, 2010
After i upgraded to karmic i experienced that the sound of spotify was at times strange. When i started a new song there was some strange plucking sounds, can most be understood as the sound a old LP-player makes when there is dust on the record. Not much but more than enough that I can hear it and wish it wasn't there. After some time of playing the songs sometimes was totally distorted by "disturbance" and it became impossible to even hear that there was a song there. Like when you are out of reception of a radio channel.
I did some research and upgraded to the wine1.2 with "custom" pulsaudio drivers. Then the total distortion was gone, but the, always present, plocking sound still was there. I have tested adjusting PCM volume, have some volume on mono, upgrading to newer pulsaudio drivers. The same problem is when ever my dear computer i producing sound. Spotify,firefox, rythmbox and mplayer. I can't see any answers after spending some time on google. I hoped i could fix this without deleting and removing pulsaudio.
View 1 Replies
ADVERTISEMENT
Jun 21, 2010
The title pretty much says it all, the sound on this system was working fine until I ran the upgrade to Lucid. I've tried everything in the standard troubleshooting guide, the sticky threads and plenty of forum searches but so far I've come up with nada. For some reason Ubuntu refuses to see my soundcard, no matter how much I twist and tweak it. It's an Asus M3A78 motherboard with an on-board Realtek ALC1200 chip (snd-hda-intel). Here's most of the relevant output, hopefully someone can easily spot what's going on because I'm getting snow-blind staring at the monitor. code...
View 4 Replies
View Related
Jan 8, 2010
The sound is an onboard Realtek AC97 chip on my motherboard. It worked absolutely fine on my 9.04 Jaunty setup. My machine is dual boot with Windows XP and the sound is fine on XP, so it's not a hardware issue. Karmic seems to think there is no audio device present at all, which is obviously not the case.This is an AMD 64-bit machine running the x64 edition, although I doubt that has anything to with the problem. Everthing else in the installation went perfectly and the GNOME desktop seems significantly quicker too.
View 9 Replies
View Related
May 1, 2010
Just upgraded to Karmic using the update manger. After the update, sound is no longer working. When I go to system>preferences>sounds and go to the Hardware tab it says there are no devices to configure.
View 5 Replies
View Related
May 28, 2010
Last Monday I upgraded the Ubuntu from Karmic Koala to Lucid Lynx in my laptop (HP Compaq volna 515), and I have no sound. Searching in linux forums for an answers, I've got that (as far as I understand) there's no unique solution for this problem.
This is my lspci code...
Also, I tried to clean up the pulse audio .. What is funny for me is that pulse audio and alsa, and the audio players seems to work normally (no error of device not found or something like that).. except that there's no sound out from the speakers.
Any suggestion to discover if the problem is drivers, kernel, packages, or hardware failure? more important, how do I get the sound back?
View 5 Replies
View Related
Jul 8, 2010
From time to time, system booted with no sound and I had to restart system to have it on again. Now I have no sound all the time and no idea where lies the problem. I would like to ask for help in making a diagnose of what could be the cause that there is no sound in my system.There is no error message while booting system. No explicit sound driver. Sound isn't muted. Sound works when using Ubuntu Live.
View 5 Replies
View Related
Jan 7, 2010
I've been using windows xp (I play chess in the chessbase server) and Ubuntu in dual boot for quite a long time with no problems. My onboard sound worked perfectly in both OS. Then I decide to buy a SB Audigy PCI sound card. It works great in Ubuntu, but there was no sounds in windows. After doing a lot of research, I read that a clean install could solve the problem. I reinstalled windows xp and the sound drivers of the sound card and alas! the sound card worked.
Then I restored grub to access Ubuntu and when I reboot to windows...I got no sounds again. So, my conclusion is that in some way the Ubuntu installation affects the sound card when working in windows. I may return this sound card. The sound card is:
Creative Labs SB0570L4 Sound Blaster Audigy SE Sound Card
I'm running windows xp 64 bit and ubuntu 9.10 64 bit.
View 1 Replies
View Related
Jun 16, 2010
I just upgraded to Karmic and since then, mouse and sound on my laptop stop working. I fixed the touchpad problem but no sound yet.
My laptop is a Presario CQ60.
Here's the audio relevant portion taken from lspci
Code:
View 5 Replies
View Related
Jan 17, 2010
I installed the vkeybd program to easily create some tunes, but when i push any of the keyboard buttons no sound comes out. I do have sound in programs like vlc. I thought jack and timidity may have something to do with it, but starting and clicking on things in those programs didnt get me anywhere because I dont have much understanding about them. How do I get a sound to come out of my speakers when i press a button in vkeybd?
View 2 Replies
View Related
Feb 17, 2010
I just installed karmic on my media server. With Jaunty, everything worked fine. I tried an upgrade, and go no sound. After poking around in the forms and trying some solutions still no sound.
So I decided to try a fresh install, again, no sound. I have cheched the obvious, mixer volumes, mute, output device, etc. But I can't seem to get it to work. I poked around in the forms and I've tried many of the solutions, but still no luck.
Here is my lspci output for my sound device...
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8345
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
[Code].....
View 3 Replies
View Related
Feb 21, 2010
Acer travelmate 4200, had no sound since a full install (not upgrade) of Karmic. Sound has worked in all previous incarnations of Ubuntu. When I try to play Audio CD I can hear a click from the speakers but only silence after that. CD plays OK if booted in XP or Win7. Output from aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
[Code].....
View 9 Replies
View Related
Dec 8, 2010
I had taken a long break from Ubuntu, but now I'm back on it. I just installed 9.10 Karmic on my Lenovo Thinkpad R61i, and it's beautiful....except there's no sound.
I have gone through the Comprehensive Sound Problem Solutions Guide, to no avail. As well, I have searched the all of the Internets, and still have no sound.
Here is some system info:
Code:
tomdabomb2u@tomdabomb2u-thinkpad:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
code....
I also added options snd-hda-intel model=thinkpad to the end of my /etc/modprobe.d/alsa-base.conf file. Still nothing. I would really like to hear the Antoine Dodson song on my laptop...not sure how much longer I can go.
Note: Everything in Sound Preferences appears to be working, I just still can't HEAR anything.
View 1 Replies
View Related
Jan 10, 2010
I had sound in Jaunty, and I just upgraded to Karmic, and everything else is working 100% ok. Except for sound. I have no sound at all if I use any other driver than OSS. I have pulseaudio installed but it doesn't recognize my sound card.
Here's the output from pulseaudio -vvvv:
Code:
and aplay -l
Code:
and hwinfo --sound
Code:
View 1 Replies
View Related
Feb 3, 2010
The sound doesn't play through the main speakers, but instead plays through the subwoofer on the bottom of the laptop. The headphone/mic jacks don't work either. I've listed the relevant lspci -v code in my other thread, but I'm not sure what other information is needed (like I'm trying to find the exact sound card I have so I can google around for a solution but since everything in laptops is so specialized I don't really know what to look for).
I do apologize if this question has somehow been answered elsewhere but I've waited 2+ weeks for a response and have gotten nothing. Also, I tried following this sticky thread but the link it refers to in step (3) under general help does not work, so I cannot proceed with any of the directions.
I am anxious to resolve this problem as I just discovered compiz-fusion and it just makes it even more fun to be loaded into my Ubuntu install, and I'm anxious to make the full-time transition to Ubuntu but I won't be able to do that if I can't play music.
View 3 Replies
View Related
Feb 7, 2010
I cannot find a post that matches this scenario...the id created during the install (from CD) of Karmic has fully usable sound. However, users created from the Users and Groups app do not.
I have made sure that all users are defined to the audio, pulse, pulse-audio, and pulse-rt groups. No luck.
I have followed every step I have read having to do with the alsamixer. No luck.
I have verified that alsa and linux itself are at the latest versions.
View 9 Replies
View Related
Mar 20, 2010
I am running 64-bit (version 9.10) on a VMWare workstation. I am having an issue with my sound card. This is the message that I get when I start the VM:A device ID has been used that is out of range for your system. Sound will be disconnected I am running Vista-64 as my host OS. I know it might be easy to blame this on Windows, but I also have an XP guest OS and sound works fine there, so it is definitely an Ubuntu related issue.
View 1 Replies
View Related
Jan 29, 2010
I have recently moved to 9:10 and I found some problems with the sound card Intel. Reading some posts I managed to partially solve the problem and now I hear the music perfectly but only from the headphones: but I need to "unflug" external amplifier in gnome-alsa-mixer each time I reboot otherwise I not even feel the headphones
lspci:
00:1 e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
aplay-l
[Code]...
View 8 Replies
View Related
Mar 7, 2010
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
View 9 Replies
View Related
Feb 9, 2010
I just upgraded to karmic the other week and now my webcam isn't working anymore. here is my dmesg output
[Code]....
the last two lines are added whenever I try to run mplayer or skype on the webcam. We are currently using uname -r: 2.6.31-19-generic (64 bit), but the problem was the same on 2.6.31-17-generic
View 3 Replies
View Related
Mar 17, 2010
I upgraded to Karmic Koala and cannot play Dvds. I installed libdvdcss and still cannot play Dvds. Running 9.10 on a Dell Inspiron 1521
View 3 Replies
View Related
Apr 17, 2010
Laptop with Nvidia integrated GO 6100. Now stuck in low graphics mode.
Uninstall/reinstall ENVY. No joy.
"Hardware Drivers" reports that Nvidia drivers version 173 are activated at the moment, but not in use. Got the same report from the 185s. 'nvidia-xconfig' produced no results.
Not sure where to go from here. Please assist.
On a positive note, my onboard Broadcom wireless is working without ndiswrapper.
View 2 Replies
View Related
May 13, 2010
No sound, no ....., skype, rhythmbox, Ubuntu sounds ......nada. For a while, each of these programs had sound, while others did not. Now nothing. I've done a lot of searching, tried a few solutions, no joy. It's possible that I did some damage in the flash plugin.
View 9 Replies
View Related
Aug 18, 2010
I am relatively new to the world of Ubuntu and I know others have had very similar problems but I have yet to find a solution. I recently upgraded to 10.4 and lost my sound. I tried installing and uninstalling PulseAudio and various ALSA utilities but I have not been able to resolve my issue. Strangely, when I try to play an mp3 in an application like VLC and then open up the PulseAudio volume control, I can see a playback bar as if an audio signal is going out. I am not, however, able to hear any sound via internal speaker, analog headphones, usb headset, etc. I ran aplay -l and got the following result:
[Code]....
View 9 Replies
View Related
May 12, 2011
I have no sound after upgrading to 11.04. Sound control panel and test speakers emits no sound. The new music player won't play sounds from music CDs either.
I thought I had listened to a music CD since upgrading early last week, but not sure. I definitely don't have sound today even after rebooting.
View 1 Replies
View Related
May 4, 2010
How did it work out? What model machine are you using?
Just wanted to get some idea of stability/functionality.
View 9 Replies
View Related
Apr 30, 2010
I recently upgraded to Ubuntu 10.04 and my sound is not working. I have a gateway p-6860FX. i've had this trouble since 9.04 and also in 9.10, but I worked around it by adding the following to my alsa-base.conf with
Code:
Sound worked fine after that, but it doesn't work with 10.04
Here are the results of aplay -L
Code:
I went in to alsamixer and turned everything up. it didn't work.
View 5 Replies
View Related
Aug 19, 2010
After upgrade today, I cannot record sound. All the equipment works fine when I boot into Windoze...
Running Audacity from a terminal gives me this message as it starts:
Code:
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
Google has thrown up some old posts (some here) - none really relevant and a hint on a mailing list that it may be a bug...
Kubuntu Lucid
AMD 64 bit
AMD 8111 soundcard
View 1 Replies
View Related
Oct 13, 2010
that said on to my problem. I have a Hauppauge hvr 950-q that I had been using with 10.04(64-bit) since it came out with no issues at all(non that i could not fix anyways) had mythtv set up using mythubuntu and all was great. I upgraded to 10.10(64-bit) last night and cannot get sound to work during live tv. If i watch an old recording the sound works. Sound also works everywhere else on my system. Before the upgrade the audio setting in the backend configuration of the tv card was set to /dev/dsp2 this no longer works. if i put it at that(i have to enter it manually) then i have no sound and if i try to change Channel the tv feed crashes.
I have tried /dev/dsp2,1 i even tried /dev/snd/contolC1 wich i got from browsing around in /dev and found this to point to my 950-q all with same results.If i use alsa:default as the audio device in the backend i still get no sound but i am at least able to change channel.everything works in TVTime.i am simply at a loss. My next step was going to be a clean install of 10.10 but i thought i would check here before taking such a drastic step.
View 9 Replies
View Related
Oct 14, 2010
after upgrade my ubuntu 10.4 to 10.10 mp3's and videos play with lag and use too much system source.
i tested totem vlc and mplayer and no luck.
View 2 Replies
View Related
Nov 7, 2010
I upgraded from 10.04 to 10.10 and lost headphone sound. My external speakers are working fine though.
I've tried Pulse Audio and Alsa Mixer to no avail. code...
View 3 Replies
View Related