Ubuntu Installation :: Unable To Install *.tar.gz On System / Enable This?
Mar 26, 2010I am trying to install *.tar.gz on linux
I am getting error like this
bash: ./configure: No such file or directory
I am trying to install *.tar.gz on linux
I am getting error like this
bash: ./configure: No such file or directory
I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card.
I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing.
Also install DVD of Fedora 11 did not work.
I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs.
What is the reason for this behavior?
Does it have to do anything with the new version of the linux kernel not being compatible with my hardware?
What should i do to install new versions of Linux?
I have recently adquired a Dell Inspiron laptop with Intel Core 2 processor and Windows 7 Home Basic Edition (64 bits) installed. Since I need for working linux I have performed a reduction of the main partition of Windows leaving free a 20 GB of hard drive. With an Ubuntu 9.04 Desktop version (64 bits) I have installed then Ubuntu linux in the empty space mentioned now then having a dual boot laptop (I have done this before with other computers, I knew how to do it so to make it work). All went well and both OS works fine. I have installed a lot of packs without any problem, when I installed thunderbird pack I notice that its version is 2.0. I didn`t think that was a problem until I wanted to install some addons and thunderbird complaints that those addons only work with versions superior to 3.0. " Ok" I said to myself, and looked here code...
View 2 Replies View RelatedI have a very big problem here. First a little background information. I tried searching this forum but didn't find anyone with similar situation.
I have installed Ubuntu and it's variations many, many times on different computers, and once in my current desktop PC. Right now I am in a situation where I want to install Ubuntu 10.04.01 (or any version, really) but I cannot.
I have tried to install both 32-bit and 64-bit versions, I have tried Ubuntu 10.04.1 and 10.10, I have tried to install with Wubi (currently running Windows 7 64bit), I have tried to burn the images to CD and created an USB installer, nothing works, it's always the same. Installer starts, I put in "Install Ubuntu", and the screen goes blank. Nothing but a white little cursor blinking in upper left corner of screen. And I cannot type in anything.
Previously I had Ubuntu 10.04 installed with Wubi, and it worked. Right now, nothing works. Anything helpful appreciated. I can provide some system info if needed.
Ok so recently a friend recommended I try Ubuntu. So I downloaded and ripped 11.04. Reset PC went to install and got to about 95% then got an error that said "Unable to Install GRUB in /dev/sda" then downloaded 10.04 LTS and got same issue along with 10.01 (friends disc) and same issue. I have tried both 64 and 32bit, have tried iso and usb. I was able to install it on an older machine of mine and enjoying it. But I really want it on my main machine. Here are the specs of my main.
MOBO = X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard code...
Number 8 and 9 are the issue and choices after words. I am unable to select any choice on step nine. when i hit OK it wont do anything.
I hope this is all enough info and would love any help that is given. My friend who is an Ubuntu user is throwing his hands in the air at this point lol.
While doing research I found a few ppl with similar issues. And one person said when he made his own /root and /home partitions it worked. I get similar issue even if I take those steps.
Ive collected as much info for you guys as I can think of if you need more info plz let me know.
Code...
Here are the messages appears on terminal. I can reach those URLs by browser and manually download them. But when I try to install them on terminal or via package managers, simply my attempt fails.. What would be the problem here?
I will say this now; I am still in high school, so forgive my stupidity. I am trying to install either 10.10 or 10.04 on a Dell 1525. It has no operating system on it, and the CD/DVD drive is nonexistent. I have tried to install 10.10 on it using a USB, with both UNetbootin and Pen Drive Linux. Using either one, both end up freezing at the "Preparing to Install" screen. When trying to install 10.04, it will not load, even after 24 hours. On the loading screen, I pressed F1 to view the terminal and got this output:
(process:352): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
Killed
I got all downloads from their home websites, www.ubuntu.com, www.pendrivelinux.com, and www.unetbootin.sourceforge.net. I have spent all my spare time since the newest release trying to fix whatever problem there is, so does anyone know what I did wrong?
I have installed on my Ubuntu 10.10 OS via my laptop MS Office 2011 using wine.
The trouble that I am experiencing is that when trying to install MS Office 2003 to my Pc/ Non-laptop computer with Wine I keep getting the error if I double click setup.exe in the MS Office 2003 CD code...
I have seen many tutorials online but all of them require modifying .DLL's in Wine and none of them have worked so far.
I want to install F12 x64 from boot.iso.
My ISP give Internet connection only by PPPoE. A problem is next.
After partitions creation installation offer me connection from eth0 device - I need ppp0 device.
Is any way to create ppp0 device, configure PPPoE connection during installation from boot.iso?
May be it is anywhere documentatons create your own boot.iso with added PPPoE ?
I don't want download full DVD F12 or LiveCD.
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedI insert a certain cdrom into my DVD drive, the cd is mounted meaning I do can see the cd rom icon on my desktop. The cd rom icon name is the correct label of the cdrom but when I try to open the cdrom it results to be empty.
Then on the same computer I have installed Virtual Box and the Windows 7 image does read the content of the cdrom.
How can I read the content of the cdrom with ubuntu 9.10?
I am running Ubuntu Server 10.04.01. When I try to start the MySQL service with
Code:
sudo start mysql
, I get this error:
Code:
start: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
What could I do to fix it?
I am unable to create either a file or a directory in a specified path in Linux.
I am getting the error "No space left on device".
I have checked with df -k and df -i. Free disk space is 28 % and free inodes are 28 %.
What else could be the reason?
I;m using RHEL5, i have a problem with my wireless lan card, my laptop wireless cant be enable , i always show a inactive in the network configuration property, i know it detect in my box code...
View 10 Replies View RelatedApplied the Lucid Lynx 10.04 over the weekend.
Since then - I am unable to burn DVDs, although I can successfully read DVD's.
Everything worked fine before the upgrade.
Under Lucid Lynx I am able to burn CD's (both data files and .ISO) so it isn't the hardware.
I have tried Brasero and k3b as burners - they issue messages that the burner doesn't like the medium, which is standard DVD-R.
Bear in mind that I could burn similar DVDs *before* the upgrade...
Any help or suggestions on how to fix this please?
I am unable to install 10.0 over a Windows XP operating system. I receive the error "Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on//filesystem.ashfs
View 1 Replies View RelatedI trying to re-install ubuntu on my computer. I'm currently on 10.10 (upgraded from 10.04) but live cd doesn't work with my hardware! I'm on asus G60Jx laptop with nvidia gts 360m. I'm not the only one to have this problem. It's my third message on this forum about this because no one answering me after 5 bump. I ask for help in ask ubuntu. I got "install ubuntu 10.04 and upgrade it, it don't take so much time" ok, I'll do that, but for 11.04, can I expect to be able to use the liveCD installation or I will install 10.04 to upgrade it after? I know that I can't change nothing for 10.10 but a bug is bug, and I wish that my computer will be more supported, thank to all. And this time, answering to me please and show me how can I report this. I know that I can use ubuntu-bug but I didn't found the fine section.
View 9 Replies View RelatedI have tried to install ubuntu on my hp server ml350 m6 i have more than 25 times
but this error is coming when select install
busybox v1.1.3
(initramfs)
Installed ubunto 10.10. The OS installed just as the directions read. got to the reboot screen and after the reboot all I have is a flashing cursor. Its a new built system.
1T HD 8GB ram AMD X3 450cpu Ati PCI-e 1gb video card. I reinstalled and got the same problem this was NOT an update from 10.4. How do I solve the problem?
I am unable to Install Fedora10 in my system as one of the multiple operating systems and it gets hanged after probing for Hardware devices and so ...I get fedora trademark sought of symbol and even after waiting any amount of time it doesnt go further..neither the keyboard works nor the mouse pointer moves... I am stuck at this screen shown in the installation screenshot...I get this screen however I dont get the options back or next or its that I am unable to see this options on the screen at all and mouse gets hanged and even keyboard doesnt work...
[code]....
Initially after booting with the media it doesnt even prompt me to press any key to boot from CD or Dvd or I get any screen to select the option for the mode of installation like text based installation or graphical installation..it hardly shows me this screen for even a fraction of second as well...
It takes me to the screen
1) Install or upgrade fedora
2) rescue existing installation...
3)
4) Memory test
when I click on install fedora I am taken to the fedora splash screen and nothing goes ahead... I tried in rescue mode as well... In rescue mode it asks me for language selection...keyboard layout... later it doesnt go ahead as well... I have checked the installation media and it confirmed that the installation media is good... I use Redhat 4.1 version and It works fine except for the message drivers/usb/hid.c core message received at :75 while trying to restart shutdown or access a virtual console... Along with Redhat and while trying to install fedora I have windows server 2008,Windows vista on that harddisk...
Since two days i am unable to add a ppa in my software sources.i have tried by both ways(terminal and directly) but this error shows up..code...
View 7 Replies View RelatedI cannot install gnome. It complains about swfdec-mozilla needing to be installed, I install it, and it now needs epiphany-extensions, which uninstalls swfdec-mozilla.
So there are conflicting dependencies. Could someone fix this?
I like the look of Freetuxtv and want to try it out. However, I couldn't install it. Here's the end with failure text. code...
View 3 Replies View RelatedA problem with installing CentOS 5.3 from DVD ...
I downloaded the CentOS-5.3-i386-bin-DVD.iso, after recording an image on DVD
Start the installation, selecting Installation Method, chose Local CDROM - Message on my screen: "CD Not Found"
P.S. md5sum matches with this website developer
What a problems?
How can I install ssh?
I tried following:
yum install openssh
The installation works fine and on the last line appears: Complete!
But openssh is not working:
I tried
ssh root@172.21.35.110
-bash: ssh: command not found
Have you any ideas? The ping works to this maschine.
I checked the rpm (thanks to pSchaff)
rpm -qa *ssh*
openssh-4.3ps-36.e15_4.3
openssh-server-4.3p2-36.e15_4.3
Do I need additional openssh-client?
I tried: yum install openssh-client but without success --> it appers "nothing to do"
I have a Dell Inspiron 1525 and I've been trying to boot into the live mode. I can get into the main 'Try Ubuntu without any changes' menu, but selecting that option causes the CD tray to spin up, followed by the head audibly flailing about for a minute or two causing the laptop to noticeably vibrate, followed by nothing. It doesn't boot or give any errors, it just stops. I can read the discs just fine in Windows.
So far I've tested shipit CDs of 9.10, 9.04 and 8.10. All cause the above problem. 8.04 works perfectly.
I found on one of my old PCs Ubuntu 9.04 installed.
I wanted to upgrade it and I get the following.
From Update Manager I cannot upgrade to 10.04
I get the following message:
An upgrade from 'jaunty' to 'lucid' is not supported with this tool.
Same message following the instructions from the link code...
I have installed fedora 14: Linux sunup 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
The problem I am having is that no matter which of the many ways I have found in the forum I can not satisfy the dependencies. For example from the directory that contains the files obtained from code...
Today morning I was upgrading ubuntu 10.10 to 11.04. When the packages were downloading it was showing 20m left to download. At that time I had a battery of 2 hrs. As I had to go so I left my laptop on and went( the charger unplugged ). When I came back I get the following message code...
I had Widows 7 also. Thank god its fine so that I am able to ask question.