Today morning I was upgrading ubuntu 10.10 to 11.04. When the packages were downloading it was showing 20m left to download. At that time I had a battery of 2 hrs. As I had to go so I left my laptop on and went( the charger unplugged ). When I came back I get the following message code...
I had Widows 7 also. Thank god its fine so that I am able to ask question.
I found on one of my old PCs Ubuntu 9.04 installed.
I wanted to upgrade it and I get the following.
From Update Manager I cannot upgrade to 10.04
I get the following message:
An upgrade from 'jaunty' to 'lucid' is not supported with this tool.
Same message following the instructions from the link code...
I have a Dell Inspiron 1525 and I've been trying to boot into the live mode. I can get into the main 'Try Ubuntu without any changes' menu, but selecting that option causes the CD tray to spin up, followed by the head audibly flailing about for a minute or two causing the laptop to noticeably vibrate, followed by nothing. It doesn't boot or give any errors, it just stops. I can read the discs just fine in Windows.
So far I've tested shipit CDs of 9.10, 9.04 and 8.10. All cause the above problem. 8.04 works perfectly.
I want to install F12 x64 from boot.iso.
My ISP give Internet connection only by PPPoE. A problem is next.
After partitions creation installation offer me connection from eth0 device - I need ppp0 device.
Is any way to create ppp0 device, configure PPPoE connection during installation from boot.iso?
May be it is anywhere documentatons create your own boot.iso with added PPPoE ?
I don't want download full DVD F12 or LiveCD.
Upgrade from Karmic - was using EasyBCD in Vista. Tried upgrading to Grub2, reinstalling Grub - but can not boot to either. Here is my Results.txt file from [URL]
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
[code]....
I have Ubuntu Mavrick installed on windows vista using wubi. it has been running smoothly since RC, when i installed it. now, after I updated using Update Manager last night I was asked to reboot. Upon rebooting i was not able to use ubuntu. the Ubuntu option is there on the windows boot menu but after i select it gruub does not appear. instead it reboots again. is there any way to fix this problem so i can use ubuntu again? if not how can i recover my ubuntu files and folders? Please help because i dont really want to reinstall after all the tweaking and stuff.
View 3 Replies View RelatedI updated my pc today, all went well no errors during upgrade. But I am unable to boot. I get the splash screen with Ubuntu and 4 coloured dots, then it goes and i get a page of txt. *starting apparmor profiles skipping profile in /etc/apparmor.d/disable: usr.bin.firefox plymouthd: ply-keyboard.c:384: ply_keyboard_watch_for_input: Assertion `keyboard != ((void*)0)' failed. *Setting sensors limits rather than invoking int scripts through /etc/init.d, use the service ( utility, e.g service s20plymouth-splash start Since the script you are attempting to invoke has been converted to an upstart job. you may also use the start ( utility, eg. start s20plymouth-splash Start: uknown job S20plymouth splash
If i leave it the screen just goes black I can get to ttyl by using ctrl&alt&f7 and log in.but thats about it startx just tells me no screens found I expect because xorg isn't used. If i go into recovery mode, failsafe graphics won't load either. So i select netroot and the enter startx which will give me a root desktop. I tried reinstalling grub, but no change. Not sure where to go from here i suspect it is something to do with plymouth? but i am no expert even tho i've been a user for 4 years
yesterday I upgraded my hardware, my specs are as following:
AMD Phenom II X4 965 (new)
Asrock K10N78D Mainboard (new)
1 TB Harddrive (Western Digital WD10EARS) (new)
Palit Geforce 460 GTX
3 GB DDR2-800 RAM
First I installed Windows 7 which worked without any problems. After that I wanted to install Ubuntu 10.10. (32 bit) The installation worked fine and the first boot also worked without any problems. Since then I get strange errors nearly everytime I try to boot up. I'm posting a "screenshot" as an attachment which shows the bottom end of the output before the system stops to work (Alt+Print+B is still working). I also get the same error when trying to boot up from a Live USB-Stick. It's quite random, around 25% of my tries are successful and the system boots up normally.
Things I already tried:
- Testing my RAM (no errors)
- Booting with just one RAM block (same error, also tried a different one)
- Installing 10.04/BIOS Reset/Installing from CD (same problem)
So what do you think? A hardware defect? Then I wonder why Win7 works fine.I would like to post a complete boot log, how can I do that?
I just updated my ubuntu 10.10 installation inside windows (wubi) and after that I shut down my computer. Later on I switched it on again and was unable to boot ubuntu. Ususally I first get the 'Windows boot menu' and after i select ubuntu i get the grub menu. Now, when I select ubuntu in the windows boot menu I dont get grub after that but instead the computer restarts. Is there any way to fix this issue without reinstalling ubuntu.
View 2 Replies View RelatedI had problems with booting my PC after kernel updates several times. In the past I just reinstalled Ubuntu and after several tries with running Update Manager things were working again.This time I applied another recommended set of updates, including a kernel upgrade and got the usual "Kernel Panic - not syncing: VFS: Unable to mount root fs on unkown-block(0,0)"After booting from a LiveCD and running boot_info_script I rebooted again and this time I am getting tons of errors which seem to be generated while running grub. After a few minutes of 'error: syntax error' and 'error: Incorrect command' scrolling through my screen, grub gives my a grub> prompt... Not what I expected!Here is the output of the boot_info_script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/mapper/isw_cagifdjehe_Volume0 and
[code]...
I have two RAIDed disks (mirrored and showing OK during POST). The disk shows above as a6071eb5-6fc6-45b3-babb-c1a2156278d7. Ubuntu 10.10 installs fine from a LiveCD, but gets broken by kernel updates. I can see the original 1 TB disk when I start with the LiveCD and I can access all the files.
It's become a tradition since I've installed FC6 on my machine: after each Fedora upgrade, the PC hangs at reboot because of a badly make initrd !
I found this post a while ago that helped me to solve the problem by rebuilding the initrd with the right librairies in it: [url]
So for each upgrade I've done the last 2 years I had to follow again these instructions to rebuild the initrd.
I've just finished the upgrade from F9 to F10 and I faced the following friendly message:
Code:
Allright, not a surprise in fact. While rebuilding the initrd I discovered there's no more /lib/i686/nosegneg/ directory in Fedora10's initrd. Therefore I reinstalled the libm-2.9.so library as follows:
Code:
Once the initrd rebuilt, I rebooted and faced a second friendly message:
Code:
I searched for posts reporting problems with segfault in ld-2.9.so but didn't find anything. So now I'm with a successfully upgraded fedora 10 system that refuses to boot.
By the way, I've done the upgrade using the netinstall CD, all the packages have been retreived online without errors and I think I've therefore the latest versions.
How to making this F10 box to start ?
I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get
2) Unable to boot windows 7
3) Unable to activate proprietary drivers
4) Perpetually being reminded to restart
yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #6 for /boot/grub.
sda1:
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
[Code]....
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedApplied the Lucid Lynx 10.04 over the weekend.
Since then - I am unable to burn DVDs, although I can successfully read DVD's.
Everything worked fine before the upgrade.
Under Lucid Lynx I am able to burn CD's (both data files and .ISO) so it isn't the hardware.
I have tried Brasero and k3b as burners - they issue messages that the burner doesn't like the medium, which is standard DVD-R.
Bear in mind that I could burn similar DVDs *before* the upgrade...
Any help or suggestions on how to fix this please?
Problem:
Error: no such device: f50139a2-b475-4ef5-8217-051bd145a24e.
grub rescue> _
I know it is saying that the harddrive that I installed ubuntu is missing.
Heres the story:
My friend's computer wouldnt let him boot to the CD to install Ubuntu on his computer.
So I put his harddrive into my computer as my 3'rd Harddrive and booted the CD on my Machiene and installed Ubuntu to his harddrive.
We got ubuntu to work just fine, and then I removed his harddrive from my computer... big mistake. I no longer have the harddrive that we installed ubuntu to so I cannot use any programs or anything.
What I want to do is get my Windows 7 working again. Right now I cannot do ANYTHING.
I have tried code...
I've been dual booting 10.10(with Windows7) for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open up several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem. It failed to boot and got this message code...
First of all, i'll just say this myself. I'm a dumbass and tried to fix somethings that wasn't even a problem from the start and now my 9.10 installation is totally fubar. There, done, now let's move on.
Ok, so I tried to delete a folder after compiling two binaries to the wrong folder and used the
Code:
rm -r
command on what I thought was the folder /home/lars/bin. And to add to the dumbass-ering, I was root while doing this. The computer hangs and leaves me with no other options than doing a hard-reset via power-button.
After rebooting I can't even see the login screen, it just hangs at the Ubuntu symbol.
So I give the recovery mode option in my grub menu a try and it gives me a bunch of lines, all looking good until I get this and the boot just stops with a blinking underscore. code...
Should I just beat myself for a while and then reinstall the OS or what...?
The hardware involved is a Asus EEEpc 1000h.
ps. I'm new to Linux and have so-far managed to get around by following guides and tips, just a heads-up.
I am able to get into GRUB and boot Linux, but whenever I select Windows, all I get is an error about a missing boot loader.
After the Windows install disk failed to repair it, I reinstalled the Windows system and then used the Ubuntu live-CD to restore GRUB in order to be able to boot into Linux again. Now I have the same problem as when I started (although the error screen is somewhat different now).
Does anyone know how to break this "evil circle" of mine?
I am using the 10.10 (GRUB 2 in other words).
I am running a CentOS Server (v5.5 x64, with latest CentOS kernel)
The problem is that I cannot enable DMA on my boot drive. My boot drive is an IDE SSD. All my other hard drives are SATA:
/dev/hda = IDE/ATA
dev/sda - /dev/sdf = SATA
---
/dev/sda - /dev/sdd = RAID5 for storage
/dev/sde+/dev/sdf = RAID1 for storage
[Code]....
Since two days i am unable to add a ppa in my software sources.i have tried by both ways(terminal and directly) but this error shows up..code...
View 7 Replies View RelatedI am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View RelatedI have recently adquired a Dell Inspiron laptop with Intel Core 2 processor and Windows 7 Home Basic Edition (64 bits) installed. Since I need for working linux I have performed a reduction of the main partition of Windows leaving free a 20 GB of hard drive. With an Ubuntu 9.04 Desktop version (64 bits) I have installed then Ubuntu linux in the empty space mentioned now then having a dual boot laptop (I have done this before with other computers, I knew how to do it so to make it work). All went well and both OS works fine. I have installed a lot of packs without any problem, when I installed thunderbird pack I notice that its version is 2.0. I didn`t think that was a problem until I wanted to install some addons and thunderbird complaints that those addons only work with versions superior to 3.0. " Ok" I said to myself, and looked here code...
View 2 Replies View RelatedI am trying to install *.tar.gz on linux
I am getting error like this
bash: ./configure: No such file or directory
I have a very big problem here. First a little background information. I tried searching this forum but didn't find anyone with similar situation.
I have installed Ubuntu and it's variations many, many times on different computers, and once in my current desktop PC. Right now I am in a situation where I want to install Ubuntu 10.04.01 (or any version, really) but I cannot.
I have tried to install both 32-bit and 64-bit versions, I have tried Ubuntu 10.04.1 and 10.10, I have tried to install with Wubi (currently running Windows 7 64bit), I have tried to burn the images to CD and created an USB installer, nothing works, it's always the same. Installer starts, I put in "Install Ubuntu", and the screen goes blank. Nothing but a white little cursor blinking in upper left corner of screen. And I cannot type in anything.
Previously I had Ubuntu 10.04 installed with Wubi, and it worked. Right now, nothing works. Anything helpful appreciated. I can provide some system info if needed.
Ok so recently a friend recommended I try Ubuntu. So I downloaded and ripped 11.04. Reset PC went to install and got to about 95% then got an error that said "Unable to Install GRUB in /dev/sda" then downloaded 10.04 LTS and got same issue along with 10.01 (friends disc) and same issue. I have tried both 64 and 32bit, have tried iso and usb. I was able to install it on an older machine of mine and enjoying it. But I really want it on my main machine. Here are the specs of my main.
MOBO = X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard code...
Number 8 and 9 are the issue and choices after words. I am unable to select any choice on step nine. when i hit OK it wont do anything.
I hope this is all enough info and would love any help that is given. My friend who is an Ubuntu user is throwing his hands in the air at this point lol.
While doing research I found a few ppl with similar issues. And one person said when he made his own /root and /home partitions it worked. I get similar issue even if I take those steps.
Ive collected as much info for you guys as I can think of if you need more info plz let me know.
Code...
Here are the messages appears on terminal. I can reach those URLs by browser and manually download them. But when I try to install them on terminal or via package managers, simply my attempt fails.. What would be the problem here?
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
I will say this now; I am still in high school, so forgive my stupidity. I am trying to install either 10.10 or 10.04 on a Dell 1525. It has no operating system on it, and the CD/DVD drive is nonexistent. I have tried to install 10.10 on it using a USB, with both UNetbootin and Pen Drive Linux. Using either one, both end up freezing at the "Preparing to Install" screen. When trying to install 10.04, it will not load, even after 24 hours. On the loading screen, I pressed F1 to view the terminal and got this output:
(process:352): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
Killed
I got all downloads from their home websites, www.ubuntu.com, www.pendrivelinux.com, and www.unetbootin.sourceforge.net. I have spent all my spare time since the newest release trying to fix whatever problem there is, so does anyone know what I did wrong?
I have just installed ubuntu 11.04. Package manager unable to download repo information
while in the same network ubuntu 10.04 is working fine . code...
