I'm trying to install Ubuntu Server from a USB drive. I can boot into the drive but when I'm trying to do an install I get a "can't detect CD-ROM" error. Does anyone know how I can get past this?
View 4 Repliesubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View RelatedI am attempting to install 10.10 over my 9.10 installation, but the installer says I don't have the required 2.6GB of free drive space. This problem only occurs with my 120GB SATA drive. If I plug in my old 80GB ATA drive (in a USB enclosure), there's no problem and I'm able to get past the installer's 3-point checklist.This is the first time I've encountered a problem like this and it seems as if no one else has encountered it yet. I can therefore not find this topic on any Linux forum, so I'm quite out in the cold.
View 9 Replies View RelatedI'm using the Ubuntu 9.10 alternate install CD in an external PATA USB CD drive to try to install Ubuntu on a ThinkPad X60. The installer boots but then very quickly gets to a stage where it complains that, "No Common CD-ROM drive was detected". It asks you to point out the drive or load or select drivers, but there aren't any drives or drivers to choose. I brought up another console, and looked in /dev, but there isn't anything there that resembles a CD drive.
I tried
$ modprobe ide-scsi
But it can't find the module.
I followed the instructions here, found the drivers on a working system, and put them on a thumbdrive. However, when I mount it:
$ mkdir /tmp/drive
$ mount /dev/sdc1 /tmp/drive
Mount fails due to an "invalid argument," with two different USB drives that work just fine on other systems. When even mount doesn't work, I feel like I've got both hands tied behind my back. How I can correctly implement the above command-line fixes? I'm not sure what I'm doing wrong. I've installed different Ubuntus probably a dozen times over the years, and haven't gotten stuck this badly since somewhere around version 4. Whether this problem is specifically related to the fact that my external USB CD drive has a PATA interface. If I go out and buy or borrow a SATA USB CD drive, is this problem likely to go away?
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
View 9 Replies View RelatedI got a Western Digital 500GB SATA drive, installed Vista on it no problems and made sure to leave about 120gb of unallocated space when setting up the drive. Went to install F12 via the live CD and it says no drive was detected. If I take the live CD out then it boots into Vista no problems so the drive is definitely connected OK.
I was using the 64-bit version of the live CD so I downloaded the 32-bit version but I have the same problem! The motherboard is an Asus P5QPL-AM if that makes a difference.
I am installing Fedora 15 for the first time - Fedora-15-x86_64-Live-KDE.iso. I used LiveUSBCreator to copy to a memory stick.
I boot OK and start the install process and choose "Basic Devices" but it does not appear to detect my only hard drive (SSD). All it detects is the USB memory stick that I booted from.
I have Windows 7 on my disk. There is about 50GB free space which I planned to use for Fedora.
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
I tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
I installed 9.04 on both two computers -- on an old PIII 667 box and on a dual core Intel (Dell).
DVDs play on the old PIII (jerky to be sure, but it's an old box with only 512 MB memory).
But the dual-core Intel does not even recognize that there is a DVD in the drive, so nothing happens after the disk is inserted and the drive activity light stops flashing. Nothing.
When we look in "Places" to see what drives appear on the Dell the hard drive icon shows up as does the optical drive icon. But clicking on that optical drive icon brings up a message that there is no media in the drive.
On the other hand, on the old PIII the DVD shows up in "Places" along side the hard drive and optical drive icons. Clicking on the DVD icon launches Movie Player (Totem) and the DVD plays.
I don't even know where to begin trouble-shooting this one so that the dual-core Dell will recognize that there is a disk in the drive and then play DVDs.
We do have libdvdcss2 on both computers.
One other item worth noting... Previously the Dell had SuSE Linux 11.1, and it did play DVDs without problem.
Is there an output file from the non-responding computer I can post to this list that would help identify what's preventing a DVD from being seen?
When I try to install it gets to the partition manager screen but does not see the hard drive.
Hardware Specs:
AMDX64 3800+ Socket 939 duel core
Asus a8n32-sli motherboard nforce 4 chipset
Nvidia 8600gts
2 GB Mushkin Memory DDR 400
Samsung 80GB Model: HD080HJ/P Hard Drive
Things I've tried:
I tried a different hard drive Western Digital Model:WD1600bevs - That Works Fine.
I tried Different Versions of Ubuntu 9.10X86 9.10X64 9.04X86 - None Detect Hard Drive.
I Tried Jumping the Samsung Drive from 3.0 Sata 2 to 1.5 - No difference
I tried th Samsung drive in an External USB 2.0 Encloser - Drive Works Fine.
I also tried installing Windows XP on the Samsung drive, Windows Detects the drive.
I deleted all partitions with acronis and repartitioned for Linux ext3 Filesystem.
At this point I determined that the drive works fine, The bios detects it no problem. Windows detects it no problem. My ubuntu CD's all pas integrity checks and will see a Western Digital Hard Drive No Problem. In my opinion it is like Ubuntu just doesn't support that perticular drive for some reason. Maybe Firmware?
After lot's of research i still can't find any solution to my problem, that's why i'm posting a message here.So, it's been few days now that i'm trying to install ubuntu 10.10, with the live CD, but each time when i must choose where to install it or how to make partition, it just tell me there is no hard drive..(i have two 1 TB sata hard drive )So i tried many things, GParted doesn't find my hard drive either, they appear in the bios (i can run windows), try to uninstall a raid program that might hide the hard drive, but it didn't work either.
So i came to see that i had Marvell 9123 which seems to be a SATA controller, and few people seems to have some similar issue with that Marvell stuff..I'm quite desperate now.. i tried to install ubuntu on a USB drive but my computer just doesn't boot on it (i tried this method for the sb drive URL...
Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.
Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.
I recently got the Ubuntu 9.10 cd desktop-i386 (i ordered it from canonical) and i tried to install it , but when i came to step 4 (to partition the HDD) it doesn't recognize my hard drive (3 partitions : 15 gb ext4, 37gb ntfs , 25 gb ntfs).I run Windos XP on 37 gb partition withot problems. I reserved that ext4 for karmic. Also i booted up the live cd to try smth in the terminal...i tried with sudo apt-get -y remove dmraid but still doesn't work.Also when i looked into Places menu the HDD partitions were not there.Also i don't know why but if i dont select ACPI=OFF, ofter booting up desktop freezes after 10 sec...when i select ACPI=OFF it runs great. And when i select ACPI=OFF and NOLAPIC from the F6 boot menu , ubuntu detects my hard drive in places menu and installation menu,but after 15-20 sec the screen freezes and i must restart .I dont think it's the cd because when i tested the live cd at my friends computer it detects their HDD, even without NOLAPIC ! I don't know what to do and i really need Ubunt. Do i need to upgrade my BIOS or what ?
View 4 Replies View RelatedI have a laptop with a floppy drive, and it works fine in Windows, but I'm not sure how to use it under Linux. It does not show up in PCmanFM, like my USB-harddrive, but I do have a /dev/fd0, so I tried:sudo mount /dev/fd0 /mntand then it complains about the file system not being specified, so I dosudo mount -t vfat /dev/fd0 /mntbut to no avail.
View 2 Replies View RelatedI have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
I downloaded fedora 7 vmware image from thoughtpolice long time ago.It has been working great. it is able to detect any of my usb devices.I just downloaded fedora 11 image from the same site. However, it cannot detect any usb device at all. I am trying to figure out if there is any driver/firmware I need to install (via yum?).
View 1 Replies View RelatedI 'm using vmware server to virtualized suse linux enterprise server11 as the guest operating system under my main OS of window 7 professional version, but when i plug on the pen drive, SLES11 (guest OS) that hosted under vmware with window 7 prefessional as main OS can't detect of my pendrive but i can do this before at window XP version...
View 1 Replies View RelatedI added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies View RelatedMy terminal cannot detect the flash drive at all time.
View 4 Replies View RelatedIn Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
I just installed Fedora 12 from a DVD . The process completed without incident.
I then inserted a DVD into my internal drive and nothing happened.
I then logged out and logged in again as root, and tried again-same result; nothing!
Could it have something to do with the new PolicyKit? I didn't have this problem with Fedora 11.
I have a RHEL 5 installed. I boot using a Linux preboot CD and take my machine into preboot. Now, in preboot, how should I detect that on which drive ( e.g. sda1/2or hda1/2 etc ) my RHEL5 resides?
View 5 Replies View RelatedThe other day, I installed Debian 6 XFCE on my old pc. It was using a lot of my poor little amd k6-2's ability. I couldnt run any programs without it lagging. So today I reinstalled debian 6, this time with the LXDE desktop. The processor situation is fixed and my ancient HP is quick with its old cpu.
Although I love LXDE, there is a problem, when I plug in my flash drive it wont recognize its there. (The XFCE desktop did) I have tried rebooting and all 2 of the usb slots, lol (1.1), and it wont recognize them.
I have tried formatting them in FAT and FAT32, is there a certain format that it needs? Is this a common problem?
Oh, and my mouse is USB and it works just fine.
Not sure whether is feasible or not...
Any idea how to script to detect whether are there any tape media loaded in the tape drive ?
I am trying to install ubuntu netbook remix on acer aspire one netbook. I used the usb-creator.exe tool to make bootable usb drive. When I boot from the usb drive it comes up to the boot options screen. But when I try to either install or run ubuntu from disk it goes to a black screen and stops or goes to a page long error message saying "cannot mount drive" and a list of command options. I also am not sure if setup gives you the option to reformat the hard drive. Or if this has to be done prior to booting from ubuntu usb-disk.
View 3 Replies View RelatedAt the Ubuntu.ork front page, it promises:
Quote:
This Windows installer (Wubi) will help you to run Ubuntu within your current system.
What exactly is meant my this? Does this mean it is an easier way to install the dual boot with Windows? (I am using Windows-7 on a new PC.) Or does it mean it will install Ubuntu under Windows? I assumed it meant the latter.
In any case, I downloaded it - a mere 1024K, scanned it and ran it. I get a stubborn error box with the message:
Quote:
There is no disk in the drive. Please insert a disk into drive
DeviceHarddisk3DR3
[Cancel] [Try Again] [Continue]
And that box will not go away - no matter what I press, including the [X] button in the upper corner, the box reappears. I had to go into Process Explorer to kill pyrun.exe and its parent, pyl5E39.tmp.exe before the [Cancel] button would close it for good.
I could not find doc on this so I don't know what it really wants as a prerequisite to running wubi.
I downloaded 11.04 last night and installed it onto a flash drive, but after I restart the computer and select the USB to boot first, it comes up with a boot error. I tried this on another computer to see if the iso didn't install right but it works completely fine. I don't know what else to do. I tried reinstalling the iso and redownloading also just for the hell of it.
View 6 Replies View Related