I have just built a new machine and want to transfer my hard drive over to it, can i just plug it in and power up?, will ubuntu 10.04 detect the new hardware and reconfigure. if not whats the best way to backup the data and re-install.
View 4 RepliesRecently, I decided to wipe my system, put in two 250GB hard drives and rebuild my home file and print server. One of the hard drives is a SATA drive, and the other is not. In any event, they are identified as /dev/sda and /dev/sdb in Gparted. So far so good.
Working on (reading from/writing to) the first hard drive (where the OS is installed) is no problem. However, I have had difficulty trying to get my system to recognize my second hard drive and then allow me (nate) to read and write to said second drive. I followed these directions from the ubuntu community web page during installation:
[URL]
and setup my second hard drive with an ext3 file system. The drive is /dev/sdb. The PARTITION is /dev/sdb1. The MOUNT POINT is /media/TheBase250.
The problem(s) begin at this point. I cannot:
1. Unmount the volume at my will-error says that only root can unmount
2. I am not sure if the command sudo chown -R nate:nate /media/TheBase250 allowed me to take full ownership of said drive. It appears as if nothing changes when I run this command in terminal (even when I am root) Moreover, I cannot give myself permission to read and write files to the drive.
3. However, when I open up nautilus, browse to "TheBase250", right-click in the corresponding "explorer" or "finder" window and look at the properties for the drive, it says that "nate" is the owner (under the permissions tab), but again, I cannot give myself FILE read/write capabilities, nonetheless anyone else. When I try, all that happens is the corresponding box goes back to displaying "---"
4. Interestingly, if I skip nautilus and double-click on the drive from my desktop, again, logged in as nate (only user account created) and then proceed to right-click on the window that opens up, click properties, half the time it says that I cannot make changes to the permissions because I am not "nate." Well, last time I checked, I am nate, and this is, albeit delinquent, my computer.
5. Another piece of information that may be helpful is that if I simply right-click on TheBase250 drive icon on my desktop itself, navigate to the permissions tab, the dialogue box says that "The permissions of "TheBase250" could not be determined"
Some additional information that may be helpful is the output from my fstab file. So, for your benefit, here is the output (the stars are not part of the file, but only to help improve readability):
************************************************** *****
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
[Code].....
Recently I noticed my hard drive sounding like it was repeatedly clicking off and then immediately spinning back up. Obviously, this doesn't sound like it is very good for the hard drive, and may be the cause of my computer locking up the other night.
I believe the affected hard drive is a Seagate 1TB SATA drive I bought this past summer, which is connected to the on-board SATA controller (SiLabs, I think?). Here is the dmesg output from when the problem started occurring.
Code:
[ 1385.157814] ata1: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
[ 1385.157824] ata1: SError: { PHYRdyChg 10B8B }
[ 1385.157835] ata1: hard resetting link
[ 1389.300273] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1389.406471] ata1.00: configured for UDMA/100
[ 1389.406484] ata1: EH complete
[Code]...
novice user the command to switch from one hard drive to another?
View 6 Replies View RelatedI switched the Hard Drive in my main desktop yesterday with another just so I could install something on it. Then, when I switched my other desktop hard drive back to it's original, it wouldn't detect it.
The power cables and all the connections are still good, because it still recognizes my other computers hard drive. I'm in deep trouble for screwing up the family PC, how can I fix it?
I had an old Dell Precision 470 with 2 hard drives, a 250GB boot drive with Red Hat installed, and a 500GB hard drive with data on it. Both of these are SATA. The computer died and I have replaced it with a Dell T3500. I was hoping just to move the hard drives into this computer and let generic drivers take over until I make the necessary changes. Unfortunately, I get the following kernel panic message after POST:
VFS: Cannot open root device "Volume00/root" or 00:00 append a correct "root= " boot option Right now the arguments to boot from the hard drive are:
ro root=/dev/Volume00/root hdc=ide-scsi hdd=ide-scsi
So Im having problems getting sound to work on my new machine. I dont know if its a hardware problem or if its something else. Im kinda a linux amateur but have been using it for a couple years off and on. Im running
Ubuntu 10.10
Biostar N68s+ mother board
AMD athlon 64 x2 dual core processor
my video card is a MSI N8400GS.
Im using a DVI to HDMI cord and running it into my flat screen TV for my monitor. I normally just used a analog splitter from the back of the pc to the tv for my sound to work. Never had a problem before I had this machine put together.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedI wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedI would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedThe problem is every forum I read pretty much ends up with someone suggesting DD, everyone agreeing and the threads dead-end. This is not a good solution for real world large scale usage which is what I'm trying to do. At least it doesn't appear to be unless there is some switch I have misinterpreted when invoking the command. The problem I have with it is it's super bloated and god awful slow. It tries to write out the entire partition or set of partitions (based on the choice I have made) reguardless of if any of the space had been empty, and lets say the partition I copied from was 80 GB and I copy it to a 160 GB disk/partition... I am left with an 80 GB partition and 80 GB unused space and a need to use another tool such as Gparted to resize the newly imaged disk accordingly.
Right now what I use is Norton Ghost and it can do the job I need in only a couple minutes instead of a couple hours and it sizes the partition to max size all at once. I do not want to use this program tho... The fact is in order to make ghost run at a usable speed I have to use it's Windows and not its DOS version which leaves me using something like BartPE and... that's worse than using Windows ME. Surely someone out there has noticed this is a problem and developed a better program that can at least run on par with Ghost.
why I was hoping for a Linux solution it's because I would like to use a "one stop shop" disk, so to speak, where I can boot into a small linux distro such as Puppy and have a full suite at my disposal rather than booting with one disk, wiping, rebooting with another disk, ghosting then testing everything. I suppose if anyone knows of a distro that can already do all that including a good ghost alternative already packaged I would love that.
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
How to do a clean install onto a newly formatted drive
View 3 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View Relatedubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View Related10.10 installation fails: not paritition nor hard drive visible, Gparted does not start: trying to install 10.10 as a 2nd boot to windows Xp MCE installation. I get the the stage "allocate drive space", but there is not device nor hard drive visible. if I click install now I get an error message, no root file system defined. please correct this from the partitiioning menu.If I sart GPARtition, it does not start.I am totally lost, I have two parititions on hard drive that i created with fresh XP MCE installation, one dedicated to XP, other I reserverd for Ubuntu. Neither one is viisible at the installation.
View 1 Replies View RelatedI disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ...
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
[code].....
My original intention was to install a distribution of Ubuntu onto an external hard drive so i can use it on different computers. I first downloaded and burned a copy of Ubuntu 10.10 and booted my Acer laptop to it. I then plugged in my external hard drive and tried to install ubuntu onto it by partitioning the external hard drive. After I did that, I booted from the external hard drive on my laptop and it ran the new distribution i created. However, when I tried to boot it from a different computer it said something like "partition not found." So the next time I tried to install ubuntu onto the external hard drive with out partitioning it, using the entire drive. This is what started to cause problems.
Now when I start up my laptop without the external hard drive plugged in i get "error: no such device: xxxx..... grub rescue>. When I start it up with the hard drive plugged in a grub comes up with the new installation, my old ubuntu installation, and my old windows vista.
After lot's of research i still can't find any solution to my problem, that's why i'm posting a message here.So, it's been few days now that i'm trying to install ubuntu 10.10, with the live CD, but each time when i must choose where to install it or how to make partition, it just tell me there is no hard drive..(i have two 1 TB sata hard drive )So i tried many things, GParted doesn't find my hard drive either, they appear in the bios (i can run windows), try to uninstall a raid program that might hide the hard drive, but it didn't work either.
So i came to see that i had Marvell 9123 which seems to be a SATA controller, and few people seems to have some similar issue with that Marvell stuff..I'm quite desperate now.. i tried to install ubuntu on a USB drive but my computer just doesn't boot on it (i tried this method for the sb drive URL...
Just wanted to ask the wisdom of those who installed Ubuntu 9.10 on a second HD (win Xp is allready on the first HD) how this is exactly done. In addition, I read some old threads ( [URL] and one suggestion is to change the second HD (where ubuntu indends to sit) to be the primary HD. If I'm not wrong this requires changing the hardware itself (jumpers), something that I preffer not to do. So I would also like to know if hardware changes are nessasary
View 7 Replies View RelatedI decided to migrate my PC over to it the problem is though ubuntu cannot seem to find my hard drive when it comes to ask about the Partition Table.At the moment my hard drive is running Windows 7. When I boot into ubuntu from the Live CD I can see the drive in there and browse it so it doesn't look like a driver issue to me.My next though was maybe the install CD was broken to I downloaded it again and wrote to a fresh CD...same thing. I also get an error during boot saying "An unrecoverable error has occurred" but it then continues to boot (this is when booting to the Live CD not windows).
So I then thought OK, I'll try and install Kubuntu then install Gnome over the top of it...same thing on Kubuntu. No error message this time but when it comes to asking me to setup the partitions I just get a blank screen.
I have 4 hard drives in my computer...2x 74gb raptorsand 2x 640gb caviar blacksi just wiped windows 7 from the first raptor to install linux... now when i try to install linux it tries combining the 2 raptors as a raid (which i don't have them set up for)i just want to install it on my 1st raptor.i disabled the dmraid and that took care of it trying to combine them as a raid, but then it won't recognize either of the raptors.so i try gparted to format them. and i succeed.but when i try to install again. it still doesn't recognize the raptors... and only my 640gb blacksso i disconnected the power from the blacks... but to no avail, now no hard drives show up when i'm trying to install ubuntu... i am stumped.sorry if that doesn't make much sense... ask questions and i will be glad to answer them, its very frustrating.
View 6 Replies View RelatedIve an IBM Thinkpad T41 that im hoping to isntall Ubuntu on. I installed it with dual boot as windows xp was already on it and all went fine. Now Ive downloaded the lastest Ubuntu release and burnt it to disk. I have several spare hard drives that will slot internally into my Thinkpad Most if not all are formated to NTFS My question is, and believe me i have search for days about this. From what I have searched, -I dont need to format this drive to ext3 to install ubuntu? -However any drives Ive tried all NTFS and tried booting from the CD just cause my installation to hang, just boots to a black screen -The same CD will allow me to install a dual boot so I know its not the Disk. Do i need to format my drive first? I dont want a dual boot system I just want a fresh install
View 4 Replies View RelatedI downloaded the Ubuntu installer for windows and it gave me a pop-up saying:
256MB of memory are required for installation. Only 233MB are available. Installation may fail in such circumstances. Do you wish to continue anyway?
This is an odd situation because when I finished installation of Ubuntu the first time (I uninstalled it,) it wasn't responsive and said my hard drive had 0 space on it. I still have about 23GB left on my disk. How do I clear out space so the installation can work properly?
I've got a computer where Comodo Time Machine totally wiped out the hard drive..Now when I try to boot up it says I have a registry problem..K, I thought I might be able to save my files, etc., by installing Ubuntu 9.04 to recover them..I put in the disk and Ubuntu booted up fine..I first tried to run Ubuntu without any changes to the computer..It keepsscrolling, fast at first then slows down and it says things like 1238.50734 sr 1:0:0:0:[sr0] Add.Sense:No seek complete or the number and beside it buffer I/O error on device sr0 logical block..The numbers started out in the 600's with basically the same thing but with logical block 321537..I tried to do an install, and it did the same thing..Does anybody know what this is and is there a fix or am I just spit out of luck and my hard drive is nrecoverable..I just did the check disk for errors and it found errors in 2 files.
View 1 Replies View RelatedThe HDD on which I currently have my Ubuntu partition(s) (as well as a Windows partition) is dying on me (non-zero bad sector count, with warning pop-ups from Ubuntu). I have already ordered a replacement hard drive*, but I was wondering if there is a simple way to transfer the contents of my current hard drive to my new hard drive in such a way that the new one will be a fully functional replacement (e.g. so that everything will boot and run properly on the new hard drive). Which is a different size (bigger) than the current drive.
View 5 Replies View RelatedI recently put together a computer with scrap parts that I have. It had no operating system on it at all. I downloaded Ubuntu on a different computer and burned it to a CD (I also verified the hash). I put the disk in and followed the instructions. Then when it wanted me to take the disc out and reboot I did so and clicked ok and it rebooted. I changed the boot order so that 0-HDD was first, and it said that the disk failed and wanted me to put in the system cd. Anybody have any solutions?
View 3 Replies View Related