Debian Installation :: Can't Set Screen Resolution / Get Correct Setting To Stick?
Feb 21, 2011
I installed Squeeze with LXDE on my old 600MHz Celeron, 256MB ram computer. But, every time I boot, the screen resolution is wrong. I can set it right with a few clicks of the mouse, but next time I boot up it has reverted to the wrong setting. I found that this problem has been reported on the LXDE forum, but the official response seems to be that it is not their problem.
How do I get the correct setting to stick?
View 7 Replies
ADVERTISEMENT
Jun 18, 2011
I just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found."
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.
View 3 Replies
View Related
Jan 15, 2016
I'm using two screens where one Is cheep Denver TV screen with DVD player. I have just install Jessie on my PC. Before i had Windows and there was no problems finding correct resolution for this screen. Now Jessie recognize it as Unknown and the maximum resolution I can set is 1024x768 what is way to small even for this screen. At Windows resolution was something over 1200px wide. The worst thing about it is that this resolution stretches the display really ugly. You may think I'm making big deal of nothing but for me it is actually a deal. I'm graphical designer and I need to see display as it is.
View 7 Replies
View Related
May 4, 2010
Excited at seeing the new features in 10.04, I clicked the Upgrade button tonight. I am now really regretting it! Problems:
1. My screen resolution should be 1280x1024 but the System>Preferences>Monitors control panel only shows 1024x768.
I think I have onboard Realtek graphics. Do I need to install proprietary drivers? Everything worked fine out of the box with 9.10!
2. The sound isn't working. Again I think I have onboard Realtek sound, and again it used to work fine without any intervention from me...
3. Although on first startup wireless networking was working fine, I restarted to see if that would solve the display issue, and wireless networking stopped working too!
I have an RaLink wireless card.
When I used Grub to choose 2.6.31.20, I got some error messages at startup (e.g. mount couldn't mount /dev), but then it did eventually start up and the sound and wireless networking are working again. But the resolution is still not fixed. It is now offering 1152x864, which it didn't previously, but no 1280x1024 (my screen's native resolution).
View 9 Replies
View Related
Jun 11, 2010
Ubuntu 10.04, nVidia GeForce 9400, driver ver 195.36.15.When I log in, the system always comes up in 800x600 mode. I went into the NVIDIA X Server Settings page and changed it to my preferred setting of 1152x864. I hit Apply, then Save to X Configuration File (with correct root password).All is well until restarting. Then it reverts back. The update doesn't stick. How can I make this the permenant setting?
View 3 Replies
View Related
Mar 10, 2011
I have some experience with Linux (mostly Ubuntu) but absolutely none with Fedora. In fact I have needed to re-install twice just to get to this stage. I now have a fully updated Fedora 14 Gnome desktop. I have (finally) got Nvidia graphics drivers up and running. I can open the Nvidia Settings screen and everything looks ok except that the desktop screen resolution doesn't seem correct. I have a Sony Vaio with default screen resolution of 1920x1200. In Nvidia settings it was set to AUTO, but I've changed that as root user to 1920x1200 with a refresh rate of 60 Hz and rebooted. My desktop looks quite good, but it's not 1920x1200 - maybe 1600x1200? Perhaps. How do I confirm the current resolution?
I have run
Code:
glx info | grep direct
and the output is
Code: direct rendering: Yes
GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Which I presume is ok?
View 5 Replies
View Related
Apr 8, 2011
I just got a DVI cable so I can have a dual monitor setup, (one VGA, one DVI monitor), and when the DVI cable is plugged into our 20" widescreen, the correct resolution (1680 x 1050), a "No Signal" error message will appear on the monitor. When the resolution is lower with the DVI cable, it will show up, but everything will be a bit bold and blurry. When I plug our VGA cable into the VGA slot in this monitor, everything shows up fine.
View 9 Replies
View Related
Mar 14, 2010
Code:
Fedora 12
2.6.32.9-70.fc12.i686
GEFORCE GO 7400
When my notebook boots I get a high screen resolution. However, when I login it seems to go to a lower resolution that is not clear. I think this all started when I updated to a new kernel. So I reinstalled the nvida drivers using leigh's guide. However, I still can't seem to get it to display correctly.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (mockbuild@) Sun Feb 28 14:49:02 EST 2010
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 7 Replies
View Related
Jul 11, 2011
FINALLY got my personal server up and running again after my GPU's fan died. i rigged a new fan/heatsink on it but i can't seem to get the resolution correct. nvidia-settings (version 195.36.31) says 1280x960 but i have to pan around the entire desktop (like having a huge image zoomed in on a small screen).
View 8 Replies
View Related
Nov 1, 2010
I recently built a new computer and moved over my old graphics card, a nVidia GTX 275. Everything appeared to work fine, it booted with no drama etc.
I use my computer for work and gaming, all my work, web browsing, chat etc happens on Debian. I play games on Windows 7.I did a fresh Debian install on this box and everything went smoothly until starting xdm for the first time, it wouldn't go to a higher resolution than 640x480. I'd already installed the proprietary nVidia drivers and they appeared to be working fine, just at the wrong resolution.
View 3 Replies
View Related
Jul 26, 2015
Debian Stable LXDE
Samsung LD190N
NVIDIA GT 730
Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":
Code: Select allerik@DRAGON:/var/log$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 61.00*
800x600 61.00
[Code] ....
Found these lines in /var/log/kern.log stating "unknown Kepler chipset":
Code: Select allJul 26 17:35:34 DRAGON kernel: [ 15.510099] nouveau ![ DEVICE][0000:03:00.0] unknown Kepler chipset
Jul 26 17:35:34 DRAGON kernel: [ 15.510148] nouveau E[ DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1
Jul 26 17:35:34 DRAGON kernel: [ 15.510191] nouveau E[ DRM] failed to create 0x80000080, -22
Jul 26 17:35:34 DRAGON kernel: [ 15.510419] nouveau: probe of 0000:03:00.0 failed with error -22
Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:
[URL] ....
Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?
View 3 Replies
View Related
Nov 10, 2010
I just installed Suse 11.3 64bit on a new build. My video card is a nvidia gt240. I am using the default drivers. My monitor is a NEC 17" LCD.
When I boot up the screen resolution defaults to 1280x1024. I can go to applications>configure desktop>display and set it to 1024x768, which is my resolution of choice, and it works until I reboot or log out and log back in, then it resets to 1280x1024.
I would like to make 1024x768 the default so I don't have to keep changing it. Is there a way to do this? The output of xrandr looks like this:
$~> xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DVI-I-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0 +
1152x864 75.0
1024x768 75.1 70.1* 60.0
[Code]...
Is there something I can change to set a new default resolution?
View 9 Replies
View Related
Jun 20, 2010
Monitor: Asus VH242H
Graphics: XGI Volari Z9s
The native resolution of my monitor is 1920x1080. I can't get Ubuntu 10.04 to display at this resolution. Current xorg.conf (relevant sections):
[Code]....
I was able to get the terminals to run at 1920x1080 by adding Code: video=sisfb:mode:1920x1080x32,rate:70,mem:4096 to my grub command. That's nice, but I really want Xorg running at that resolution, and it didn't. I've been working on this for hours, through dozens of gdm restarts with every variation of the above I can think of.?
View 1 Replies
View Related
Mar 18, 2011
I have ubuntu 10.10 installed on my computer in dual boot with windows 7, but i am using a 27-inches Samsung screen through an hdmi cable to connect my computer. whenever i try getting on ubuntu, i cannot see the top and bottom of the desktop (so i cant access the menu bar or anything!)(while using my spare vga cable) i tried downloading the nvidia driver & utility for my video card (gtx 460), but even using that, i could not setup my screen resolution manually. When i setup my windows, i was able to manually setup a custom resolution (i.e. 1842x1026) through the nvidia utility to be able to get the screen the fit properly.
I was wondering if there is any way i could do the same for ubuntu, perhaps through terminal.
View 6 Replies
View Related
May 13, 2010
I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.
View 6 Replies
View Related
Jun 11, 2010
I'm slowly figuring out Mythbuntu. How cool it is! I continue to have this problem...Some channels have trouble locking initially. Some even hang while viewing. Using exactly the same antenna and cabling, my Samsung DTB-H260F has no such issue. All channels are rock solid. Is there some setting not correct in MythTV? Do I need to invest in a better tuner?
View 2 Replies
View Related
Jan 5, 2010
I've been trying for very long now to adjust my screen resolution to my desired setting. So far, no luck. Just today I went in to examine what my xorg.conf looked like and this is what I saw.
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
[Code].....
View 3 Replies
View Related
Dec 6, 2010
I have what I think is a pretty eay question. I'm trying to set the screen resolution of my new 10.10 installation to 1920x1080. The monitor only supports up to 1024x768, but i would like more area. I've done this before but I forgot how i did it. In the end the screen spilled off to the sides and when I ran my cursor over to that section it would disply it. I have a feeling that i need to edit my xorg.conf file, but my nvidia drive has some new mode types and i figured I'd ask before making random changes.
below is my xorg.conf file.
UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
[Code]...
View 2 Replies
View Related
May 3, 2011
I'm trying to change the output resolution of a HTPC that's connected to a 720p plasma from (an auto set) 1024x768 to 1280x720 so that the output is the correct 16:9 ratio for the plasma.The HTPC is running Ubuntu 11.04 with a GeForce 7600GT and is connected via VGA cable to the plasma. The plasma automatically detects the PC input as XGA.
The worst effect of this is 16:9 media (video clips etc) looks really stretched out with the letterbox bars on the top and bottom and icons in general don't look square.Nvidia driver has been activated via Additional Drivers but the message reads;
Quote:
The driver is active but not in use"
Any ideas what that means? Should I be looking for a way to disable whatever the Ubuntu driver is so the proprietry one is in use?Under nVidia Xserver settings I don't have an option for a 1280x720 resolution, the next closest resolution for 16:9 is 1360x768 but then portions of the output are no longer visible on the plasma.Could it be as simple as using the DVI output (not the VGA) from the graphics card to the plasma to get a correct reading of the input. Still, I wouldn't have a setting for 1280x720
View 4 Replies
View Related
Oct 31, 2009
New install of 5.4 and I have a dell S1909W display that runs 1440x900. I don't run a windowed environment and only use CLI. I am only getting 25 lines per screen with huge text and I need to set the resolution so I can actually work :) I tried adding vga=866 to my /boot/grub/menu.lst file at the end of the kernel line but nothing changes after reboot.
View 2 Replies
View Related
Jun 5, 2011
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies
View Related
Aug 1, 2009
How can I lock in a screen resolution setting so Fedora has no other options to use? I had this problem and thought it went away as F11 has been behaving fine for weeks. Today it froze so I had to power cycle to reboot. It came back but had a crappy resolution setting and no higher options available.
I had to re-boot twice to get it to finally load the correct settings again. How can I fix this so it cannot boot to lower resolution? I want to LOCK IN the minimum resolution so it cannot boot to that crappy screen whenever it has a mind to. I feel I should be the one to decide what to load it's my computer !!
View 6 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
Apr 4, 2011
I recently set up Kubuntu for my parents, and its working fine, other than the screen resolution. When I log in, it uses 800x600 when it should be using 1280x1024. I've tried to generate/ edit xorg.conf, but Kubuntu doesn't seem to pay attention to it. Also, I don't know if it matters, but it seems to be detecting a second screen that doesn't exist (see picture). That "monitor" can only go up to 800x600, but when I disabled it, it stayed off. When it was on and I pressed identify monitors, however, it put both labels on the main monitor. Here's the picture of the two monitors:
View 8 Replies
View Related
Mar 24, 2010
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies
View Related
Aug 23, 2010
I have a fresh install of debian on an older laptop. The screen resolution is 800 x 600, but I want it to be 1024 x768. I know this screen can handle this resolution because I've used it before. I tampered with xorg.conf according to this link, viewtopic.php?t=26577, but to no avail. Here is my xorg.conf
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
Option"XkbRules""xorg"
Option"XkbModel""pc104"
Option"XkbLayout""us"
[Code]...
View 6 Replies
View Related
Jun 23, 2010
One day when i logged in, my screen resolution became lower. The sistem do not recognize anymore my old resolution (native) 1600x900 . And you can realize that maybe there are problems with the video card, because the system is slower than before in this terms. What could have happened?
View 4 Replies
View Related
Aug 17, 2010
Ever since I installed Debian, my monitor keep saying: "Input Signal Out of Range Change Settings to 1600x900 - 60Hz". So I thought it a problem of the screen resolution, so I have been trying to edit my xorg.conf file, but it doesn't seem to work at all. And this is my settings.
Section "Monitor"
Identifier"Configured Monitor"
EndSection
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
Device"HP 2009m"
SubSection "Display"
Depth24
Virtual2048 2048
Modes"1600x900_60.00"
EndSubSection
EndSection
View 2 Replies
View Related
Jan 19, 2010
I've been googling around for a while now and have been unsuccessful in setting up the screen resolution up properly... I have the manual for my monitor in case you ask for any of the specs. Other than unsuccessfully changing the xorg file, I've successfully went through the steps on Debians wiki site for NvidiaGraphicsDrivers in order to get my 9800gt working. I want to get the resolution upto 1400x900, but in the "Screen Resolution" window I only have the option for 640x480,50Hz
[Code]...
View 9 Replies
View Related
Nov 3, 2010
I am on a Debian 5 server and there is no desktop environment installed.I use mysql client on localhost and it's very hard to read tables with the lowest screen resolution.Is there a way to change it? I saw a few times, BACKTRACK changes command line's screen resolution but I don't know how to it or is it possible on debian.
View 7 Replies
View Related
