Since upgrading my mythbuntu box from lucid to maverick my boot times have been much slower. Looking at dmesg I can see delays. Can anyone who knows more than me point me in the right direction to fix these?
Code:
[ 2.123939] usbhid: USB HID core driver
[ 2.396712] EXT4-fs (sda1): orphan cleanup on readonly fs
[code]...
I just upgraded my old laptop to Maverick, and something went wrong. The update process crashed near the end. I had to kill the window. Tried to do a dist-upgrade but nothing happened, so I rebooted. After the reboot, I got a black screen, showing "Disconnected from Plymouth", and a login prompt. But the keyboard is disabled, so I can't even log in. If I try the recovery mode, I get a menu with options to get to a command line, but the keyboard is still disabled (only Ctrl-Alt-Del works).I already had a similar error in Lucid: the black screen with the Plymouth error showed up, but after a few seconds X started anyway and everything went fine. Now I'm stuck.
View 1 Replies View RelatedI swapped out the hard drive on my laptop for a bigger one and put Kubuntu 10.10 on it back in March. The one big complaint I have is that it has a ridiculously slow boot time in comparison to Ubuntu 10.04. I have since installed most of the Gnome Ubuntu desktop through the repos and switched from kdm to gdm but I still have this relatively long period of blank screen with cursor until it goes straight to the gdm. The plymouth boot screen won't show at all. Is there a relatively simple fix for this?
I should add that I am not interested in updating to Natty. I have a limited bandwith I can use and a lot of accumulated software through the repos that would require several gigabytes of reinstall.
I just recently upgraded my kubuntu install from karmic to lucid and now it takes about 10-15 minutes to boot. Directly after the upgrade it was pretty slow already, but it got worse every day from then. The karmic version was a wubi install I moved to a dedicated partition using lvpm. Here are the results from the bootinfoscript code...
View 9 Replies View Related10.04 boasts a very quick boot time, but after upgrading, I've been having a much slower boot than in 9.10. It hangs at the screen when it says
Boot from (hd1, 0) ext3
Starting up...
It stays at this screen for a good 15 seconds before showing me the login screen. I've attached the results from a boot info script.
can we upgrade lucid to maverick by using maverick live cd. what are the other methods for upgradation
View 3 Replies View RelatedI am still booting from my Ubuntu Lucid Lynx, and I want to upgrade to 10.04 Maverick Meerkat without losing any of the files, and work I have done so far. I have discussed this with a friend, and he has informed me that I can do this by going to the upgrade manager in the ADMINISTRATION menu under SYSTEM. He told me all I had to do was click install, and it would install all of the packages for me, and automatically upgrade everything to 10.10 without any loss of files and information. Is this true? Also currently I am dual booting from Windows XP, and Lucid Lynx. I have a 32 bit processor, Intel Dual Core.
View 2 Replies View RelatedI installed Lucid in my laptop like this:
/sda1 - ntfs windows xp
/sda2 - /boot (ext4,350M)
/sda5 - / (31528.59M)
/sda6 swap (3,2g)
/sda4 - ntfs windows data, music etc.
After I installed 10.04, I installed following programs:
-Chromium BSU (game)
-Chromium - Brownser
-Xchat
Then I followe EXACTLY this guide:
[URL]
But NO UPGRADE button appears. How Can I upgrade, without and make a fresh install? I also tried in CLI to:
z@z-laptop:/$ lsb_release -a
No LSB modules are available.
Distributor ID:Ubuntu
[code]....
I was just wondering how long I have to upgrade to 11.04 until Maverick Meerkat is EOL. I have talked to other people, and they say to wait about a month until after the release to fix all bugs and stuff. Is this a good Idea? Or should I update now and just get it over with?
View 1 Replies View RelatedI have no option to upgrade in the update manager. I suspect that this has something to do with the fact that I haven't been able to install a number of updates for a while (I receive the Partial Upgrade error message). Is there any other safe way to upgrade that can bypass this problem?
View 3 Replies View RelatedI updated my ubuntu today from 10.04.1 to 10.10 and my microphone stopped working. I spotted a message during the loading of 10.10 that modprobe failed starting because some file was missing.
View 2 Replies View RelatedI browsed on internet to find how to upgrade to 11.04 and find the answer.Press Alt+F2 and enter the command update-manager -dAfter authentication, the manager showed the updates and at some point of time, I got the following error.
----
E: Encountered a section with no Package: header
E: Problem with MergeList
[code].....
I upgrade to 10.10 via online upgrade yesterday morning. All seems to run fine, and before the yesterday afternoon upgrade, compiz appears disabled and each time I try to enable it I get the error message.I checked the direct rendering is working. Google Earth works fine also, so all seems to be OK.
My system: Eee PC 1201n, Nvidia Ion, 4 Gb Ram, 320Gb HD
Ubuntu Maverick updated.
Can not upgrade An upgrade from 'karmic' to 'maverick' is not supported with this tool.
View 1 Replies View RelatedI currently use Karmic Koala (9.10) and want to upgrade to Maverick Meerkat (10.10). The thing is that Update Manager allows me to upgrade only to 10.04 (Lucid Lynx) but I cannot upgrade to Lucid Lynx because of a bug which freezes my keyboard and mouse. Also, upgrading first to 10.04 and then to 10.10 is quite time consuming. Can I upgrade directly to 10.10 from 9.10 without 10.04 acting as a mediator?
[URL]
I accidentally cancelled the upgrade (ctrl-c) to maverick before it finished on one of my servers. It was during one of the questions about installing an updated config file. If I run "sudo apt-get dist-upgrade", it complains that it can't lock the directory /var/lib/dpkg. What can I do to recover this and continue with the upgrade?
EDIT: forgot to say this system is running ubuntu-server with no GUI
An unresolvable problem occurred while calculating the upgrade:E:ErrorpkgProblemResolver::Resolve generated breaks, this may be caused byheld packages.This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
View 1 Replies View RelatedI seem to have made a hash of moving a machine from jaunty to maverick. It used the kde3 remix, and pearson's site seems to be bouncing up and down, mostly down, for that at the moment. I've ended up with a machine that is console only. I've tried installing ubuntu-standard, which put a bunch of things on, but still no GUI.
staying with KDE3 would be nice, but I don't have time to mess with it. I find KDE4 painful, and have been put off by the ideological "purity" that caused the gnome split since its inception. I guess that leaves me with Unity. But how do I get the bloody thing up. Heck, xdm & fvwm sounds pretty good right now, too.
When I first installed Ubuntu as a dual-boot (about 18 months ago), I had problems booting to XP, which were eventually solved for me in this thread, which set Windows to boot Ubuntu, rather than the other way round.
I've just had to do a fresh install of Maverick, following a major problem, and I'm back to being unable to boot XP. The error is different from before and I don't want to start guessing at what to do about it and screwing things up still further.
The GRUB menu lists Ubuntu first, then Windows XP. If I choose XP, it takes me to my previous boot menu, with Windows as the first option. However, selecting this gives me
Code:
Windows could not start because the following file is missing or corrupt:
<Windows root>system32
toskml.exe
Please re-install a copy of the above file. Windows and Ubuntu are on separate hard drives. XP was fine until I re-installed Ubuntu.
I've upgraded my netbook from Lucid to Maverick, and have a couple of questions:
1. My start-up apps don't appear to be running. In particular Tilda and Gnome-Do don't start up - and removal of the "Alt+F2" shortcut to run programs makes it hard to start them manually.
2. I'm still getting the old launcher as the desktop, with no search box in the top bar. (In many respects having the old launcher isn't so bad, as I'm Not Friends with the new Unity side-panel.
I recently upgraded from Lucid Lynx to Maverick Meerkat and my OpenOffice.org Impress presentations' sound is not working. I don't have any issues affecting sound in other applications.
View 4 Replies View RelatedI recently upgraded kubuntu from 10.04 to 10.10 Slower boot time First,systen will wait a few seconds on tty1 after a few seconds then jump to the login screen Then wait for a few seconds to type When I waiting the hard drive do not do anything My hardware is lenovo r400 Intel (R) Core (TM) 2 Duo CPU P8700@2.53GHz. RAM 4G Before the upgrade are quite fast boo Become like this after the upgrade
[Code]...
I would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
I am getting a much slower boot with the 10.04 upgrade. After choosing which partition to use I get the blinking white cursor in the upper left hand corner and the "Boot from (hd0,4) ext 3..." sits there for a while before coming to the log in screen. There have been quite a few posts about this, a lot of people are saying disabling the floppy drive in the BIOS has worked for them. I don't have a floppy drive on my laptop.
View 9 Replies View RelatedI've seen this issue mentioned before, but it appears their cause was different than mine.Here is a snippet of my dmesg log:
Code:
[ 2.797917] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.798077] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.798149] sr 3:0:0:0: Attached scsi generic sg1 type 5[code]....
I'm not exactly sure what that is or why that's causing it to take so long to do.
I just upgraded my laptop to 10.10 and now when I boot the display doesn't show anything. This laptop worked flawlessly on 10.04. I can tell the underlying system is fine, because if I type my boot password the hard disk activity picks up like it is continuing to boot, and CTRL+ALT+DEL reboots the computer as one would expect. When I boot using an old kernel (a leftover from 10.04 I think) via GRUB the system boots normally. What can I do about this? My laptop is an HP Elitebook 2730p. According to the specs it uses an Intel GMA 4500MHD for graphics. I am using the 64-bit version of Ubuntu.
View 5 Replies View RelatedNeither from update manager or live usb pendrive. Can I make liveusb of lucid & delete maverick partition & reinstall? is mbrfix better? I have an ubuntu partion & an xp partition. install from update manager just hangs with orange screen after login. pendrive boot hangs with black screen with syslinux line.
View 1 Replies View RelatedMy 10.10 to 11.04 upgrade has been running now for 2 hours and says it has 15 hours left! Are the servers just max'ed out with people upgrading? We bit worried too after seeing posts that say that some Nvidia cards aren't working with 11.04 but I'll have to wait and see for mine. (Quadro FX 3800)
View 9 Replies View RelatedI recently upgraded to Maverick. I did a clean install on my system. I am running NVIDIA drivers from the X-Swat repo. Whenever I try to play a mkv file using Gnome Mplayer it is very jumpy and laggy. VLC, using it's new hardware acceleration, won't even display video, though it does output the audio. I experienced none of these problems with my 10.04 setup. I am unsure if it is a player bug, a driver bug or something with the VDPAU library itself.
View 9 Replies View RelatedSince I upgraded to Maverick, every now and then (maybe once an hour) my system becomes very slow for about half a minute. The mouse cursor reacts only very slowly and also applications freeze for for some time.
This happens without the CPU being on full load or the hard disk being active.
I made a clean ubuntu installation on a new hard drive a week ago, but the problem persists.
I have a Thinkpad R400 with an Intel GMA 4500 graphics card an an Intel T5670 Core 2 Duo processor. I'm running the most up to date stable version of ubuntu. Kernel 2.6.35-22.
I know the description of the problem is very vague, but it's hard to describe it more accurately. I couldn't find anything helpful on google or the forum. If you have any ideas what might cause the problem or which log files might provide useful information, please let me know. Most importantly, the problem did not occur before I upgraded to Maverick.