Ubuntu Installation :: Re-install To Fix Missing File?
Jan 2, 2011
I have a Dell mini 9 or 10 (not sure which one) running Ubuntu 8.04. When trying to watch ..... clips it says install missing plugins. I have tried most of the work arounds on these forums but can't get it to work. I have therefore downloaded the latest version of Netbook Ubuntu and put it on a pendrive.Can someone kindly tell me if installing the new Ubuntu will solve my problem and how do I do this?I am okay on a computer but not great. I am after step by step instructions on how to uninstall and then install
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
I was trying to install Ubuntu for long time and abandoned the idea a few times because of the same technical problem which seems to pop over and over again. ive been trying to install it after using an XP system or a Win 7 OP, and every time i faced the same Error again again- "wubildr.mbr file is missing". i installed it from a CD and tried the Wubi program too but both gave me the same error at the end. i have a decent PC with 2 hard drives, 1 of 500gbs and the other with 160gbs(which is used for the OP's). the goal was to install Ubuntu alone with no other operation systems in other partitions. Now i thought to use the Full Format of the Win XP which takes about half an hour or probably more and then installed the Ubuntu system, i got some different error which goes like this- "Windows rootsystem32hal.dll missing"
I am trying to install gcc so I can compile C++ on a Virtual linux machine I have on my pc. I went to the GNU website and downloaded gcc-g++-4.5.0.tar.gz, unzipped and un-tarred it. This left me with a folder named gcc-4.5.0 which itself contained two folders. One named gcc and another named libstdc++-v3. From trying to follow a (not very clear) guide online I created another folder in the libstdc++-v3 folder named objdir into which I copied the configre executable. I then tried to run it here and was told that I was missing an install.sh file.
found one of these from somewhere else on my machine and copied it into the libstdc++-v3 folder. Now when I try to run the configure executable from the objdir folder I get a message saying "configure: error: cannot run /bin/bash ./config.sub.Basically all I want to do is get gcc up and running so I can compile some codeWhat I have been doing so far is probably way off the mark but its as far as I could get from following stuff online.
I downloaded Wine from [URL] and installed Wine 1.1.32 and it stated that I'm missing a file can anyone tell me what the deal is? do I need something more or ignore it?
I have installed ubuntu 10.4 as a dual boot with Windows 7. I thought, because of a previous experience, that my music and pictures were ok in the windows file system because I would be able to access them. Well I can't. I don't even see the the Windows c: drive. I know its still there because I can boot windows.
So what do I need to do to make the c: volume / drive reappear.
I have installed windows 7 back to its former state in after foolishly messing around with some installation options in an Ubuntu install (this caused windows to disappear, and me to repair it). In *repairing* windows, I overwrote my grub file and the boot options for Ubuntu, so that it looks something like this:
Disk 1: Primary Partition - Windows 7 Disk 1: Secondary Partition - Windows 7 Disk 1: Secondary Partition - Free Space ( this is where I have Ubuntu installed)
How can I repair my grub file so that I can boot into my Ubuntu installation?
I used to have Windows XP Professional on my computer, then I decided to install Ubuntu but it didn't work for me it gave me really weird errors, I thought I uninstalled it, and then I installed Debian on my computer, Debian ran smoothly but when I tried to start Windows the GRUB from ubuntu appeared and when I tried to start windows again it showed and that the hal.dll was missing, I reinstalled Windows but still the same error appeared, this also affected my Debian GRUB so I had to install it again, I don't know what I should do in this case. How can I delete ubuntu's GRUB for good? I've already formatted my windows partition but it keeps using Ubuntu's GRUB.
I am trying to reinstall ubuntu on my asus eee netbook. When I try to open ubuntu an error message appears saying that this file <windowsroot>system32hal.dll.> is corrupt or missing. How to I reinstall this file/what happened?
where to get the character set that includes this character "〪" and the install instructions (if any) Needed font file name is ARIALUNI.TTF owned by MS
First off I must state that I am basically completely foreign to linux. I have 2 hard drives, one with windows 7 and storage partitions, and the other with my linux partition, linux swap, and unpartitioned space.I initially partitioned my drives with Disk Management in Windows 7. I created an NTFS partition on sda and installed Ubuntu from within Windows (a Wubi install I suppose). I originally intended to install by booting from the iso I burned onto a CD,but the installer was failing to load (fonts would change and it would error message). LiveCD was failing to load too in the same fashion. After hitting alt and tweaking the F6 settings, LiveCD successfully loaded (my very first taste of Ubuntu, albeit somewhat bland). I then decided to reinstall Ubuntu with proper linux partitions from within LiveCD. Now when I select Ubuntu in the Windows Boot Manager, a WBM screen says the file:
ubuntuwinbootwubildr.mbr is missing or corrupt. I do not know if this file is the problem or merely a symptom of it Below I have copied my Boot Summary (my apologies for the length and extra partitions):
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda[code]....
I'm trying to install Squeeze onto a new DELL Vostro 1520 laptop. The Windows Device Manager says it is Realtek PCIe GBE Family Controller.
During the network card detection phase, it prompts to install missing firmware file rtl8168d-1.fw from removable media. I understand that this is a non-free blob removed from kernel v2.6.32.
When I want to view in Mozilla this on line dictionary, it tells me that I have to install a missing plugin but it doesn't know which one. I can't view anything like that.
I installed Ubuntu 10.04 in a partition alongside two other partitions that contain windows. One is a windows xp recovery partition (about 8 GB) and the other is windows xp media center (about 37 GB).The Ubuntu partition is about 180 GB. Anyway, after I installed it, I was only able to boot to Windows XP. I can't boot to Ubuntu.Using supergrub, however, I am able to get Ubuntu to boot up. In supergrub, I got to Gnu/Linux, select the option to "Boot Gnu/Linux directly", and it works.However, if I try the "Fix grub" option, I get "error 15: file not found". Also, if I try to the option of "Boot to Partiion" and I select the Ubuntu partition, I get "error 13: invalid or unsupported exectuable format".When in Ubuntu, I opened the terminal and tried the following:gksudo gedit /boot/grub/menu.lst
The menu.lst file is empty. There is nothing in it.What is going on? How can I fix it so when I boot the computer I'm given the option of booting to Windows XP media center or to Ubuntu?For additional info, I ran the bootinfoscript and the results.txt file is pasted below.
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================
I installed the W3C-Validator from the Software Centre after installing the missing dependency from oneric. But now I get a 403 when visiting [URL]. Think this is most likely a file permissions issue but am not sure which file/directory to chown?
I just tried to install kubuntu 6 times on my laptop. I have downloaded the file from a different mirror each time and burned the image via brasero. This used to work for me... Kubuntu will not install. Keeps saying its skipping missing files or something. Anyone else getting this? I eventually gave up on 9.10 and am now trying alpha 1...
I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:
Code: 2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use 2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use
I ran 'sudo apt-get install python', which completed successfully. According to [url, this should have created the directory /usr/lib/python2.6, but I do not see any such directory.
This is causing problems:
I've tried 'apt-get purge python' and then reinstalling but this has not resolved the issue.
I have recently taken delivery of a Dell Inspiron mini netbook with Ubuntu on, and I am new-fangled .install updates, I clicked the (orange down-arrow) button, and it compalined "E: /var/cache/apt/archives/linux-image-2.6.24-22-lpia_2.6.24-22.45netbook9_lpia.deb: files list file for package `libxcb-shape0' is missing final newline"
so i cannot install anything because update-info-dir file is missing from /var/lib/dpkg/info/ .. I've searched for the last day and a half for a way to fix this, but nothing. can't even update dpkg because of this. so how do I bypass or fix this so I can install stuff (this is a fresh install of ubuntu 10.04 lts Lucid Lynx).
I have just downloaded this theme: [URL] I tried using emerald to install the theme - I can see the theme there, but I cannot install it. I opened CCSM, and see no option for a theme. I am rather new with linux, so I am more than likely missing something
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
currently I'm using a kernel from kernel-mainline [url], because thermal won't work satisfying with the shipped kernel from ubuntu and would like to install tp_smapi (including modules hdaps and thinkpad_ec), but the installation failed, because the system pretending, that kernel-headers missing.
Code:
Results in telling the system, that kernel-headers are installed.
Code:
But then the upcoming dialog-box of module-assistant telling me, that the kernel-headers are not installed and therefore installation of tp_smapi fails.
I am a brand new Ubuntu user that just tried to install on an old PC using the 10.10 desktop edition.During installation, I hit an error that the bootloader could not install, and after reading about it on the forums, opted to attempt to install it manually after. I have followed the tutorial located here,[URL].. on reinstalling GRUB2 from the liveCD, which I assume means to boot with the installation CD and select try Ubuntu (given the only other option is install, which I have tried twice) everything up to step 5 in that tutorial seems to run successfully, and I am given a message it is installed, but then when I reboot the system it does not open the GRUB2 menu, rather the CLI interface, which suggests there is no grub.cfg
So I am unable to refresh at the GRUB menu because that command is not recognized by the CLI (and it may not help if I am missing files, so I might have screwed up reinstalling them in step 5, or maybe the "Try Ubuntu" terminal doesn't alter the computer like I thought?)
after installing Natty on my brand new shuttle with Intel's Sandy Bridge Core i5 (2500K), everything works fine except setting up a higher resolution fitting to my screen.All I need is a 2048x1152 resolution, but all the display configuration in the hardware section of the system settings offers is 1024x768, 800x600, 848x480 or 640x480.The monitor is connected via VGA since it doesn't have a DVI or HDMI plug.Is there a way to tell the system there is more capability? Do I need a different driver? What and where can I check this?
