Ubuntu Installation :: 10.10 - No Option To Not Install Grub
Mar 28, 2011
I installed 9.10, and then upgraded to grub2. This went without issue. I am now in the process of installing 10.10. I have the partitions set up as follows,
sda1 primary 8GB swap
sda5 logical 10gb / for 9.10
sda6 logical 20gb /home for 9.10
with grub2 installed on the mbr of sda. I then added
sda7 logical 10gb / for 10.10
sda8 logical 20gb /home for 10.10
This seems like the best config for a multiboot setup.I was not going to install grub with 10.10, but just boot back into 9.10 and run update-grub. The only options are to install grub on sda, or on one of the logical parts. There is no option in the menu to not install grub.what should I do now?
View 9 Replies
ADVERTISEMENT
Jan 24, 2011
I have my machine booting Windows 7, Ubuntu 10.10 (64bit), and OpenSUSE 11.3 (64bit). All good. When I added OpenSUSE it was really easy.There is an option not to install grub. I ticked the box and once installed I simply re-booted into Ubuntu and 'sudo update-grub'. Voila, job done. (Interestingly it uses the same /swap as Ubuntu so that is convenient, an accident, long story, and off topic!) Is there a similar option in Ubuntu where during install I can choose not to install grub and use the same method as I did with OpenSUSE?
Also, I am wanting to use the existing Ubuntu /home and /swap partitions. How do I go about that? I will do some further research on that bit and no doubt find the answer but I'm figuring I create just one partition, /, during install and somehow direct it to use the existing /home and /swap. Issue is, won't it create a /home directory inside the / partition if I don't allocate a /home partition during install?
Reason I'm doing this? I have a Realtek wireless card that has never behaved. I ended up emailing Realtek only to discover the driver/firmware wasn't suitable for 64bit systems. Therefore I am going to attempt to install Ubuntu Desktop 10.10 32bit version and see if I can't get the card behaving there.
I had thought of Virtualbox for doing this (which I have installed but haven't used yet) but decided against it only to save time when booting. I would need to boot the 64bit Ubuntu then the 32bit Ubuntu inside that. Waste of ten seconds!
View 9 Replies
View Related
May 13, 2011
In previous versions, there was an 'advanced' button where you could select NOT to install grub. I can't find that in the latest Natty release iso's. Is it no longer an option? And if not, WHY? I find myself reloading Natty quite often on a test partition to play with various parameters in my attempt to get it working as needed. But I'd really prefer to have the option to no reload grub.
View 9 Replies
View Related
Jul 18, 2010
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies
View Related
Apr 5, 2011
I had my Laptop, a Dell Inspiron 1520, running Windows 7 and Windows XP - I had a few gigs of unallocated space, so I decided to install Kubuntu alongside it, worked fine no problem, with the exception of running out of space very quickly - I got fed up with it, and installed Kubuntu over the Windows XP partition (around 80gigs, and the first OS to be installed on the computer). After I installed it.
All was working perfectly until I rebooted to discover I am missing my Windows 7 boot option in GRUB, before I had to press Windows XP Embedded and it opened the boot dialog, but here I dont get the option, is there a GRUB 2 option I can change to allow it to show Windows 7? The Computer works perfectly, it's just the GRUB doesn't show Windows 7, and I'm hesitant to format its old partition and reinstall it due to the fact that it may over ride the grub and leave me without Kubuntu access?
View 1 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Jan 4, 2010
my ubuntu install is running pretty well, but I need to boot into Windows 7 to print and convert some proprietary OneNote files.The trouble is that while my menu.lst shows a Windows option - and a few others, too, that don't seem to show up in grub2 - grub does not give me the Windows option. In fact, it seems to follow only the contents of grub.cfg.I have tried running sudo update-grub, and it does work, but does not resolve the problem.
View 2 Replies
View Related
Jun 10, 2010
I've had two students report a problem whereby Ubuntu does not show up as a menu option in Grub. Both systems used Wubi installations of Ubuntu 10.04 Desktop for x86 on Windows XP. In both cases, Ubuntu completed the installation process. Upon reboot, we have the options to choose between Windows XP and Ubuntu. However, once we enter into Grub, only the Windows XP option shows.
View 8 Replies
View Related
Jun 21, 2010
After giving it my best shot, I had to give up and finally decide that I need "acpi=off" added to the kernel line in grub. I have done so, saved it:
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-ST950212A_5LE02797-part1
pci=noacpi
I have tried "acpi=off" "pci=noacpi". But on boot the system totally ignores this and loads the acpi support from the kernal, which shut down the USB ports. Where is this option used in Suse so that the kernel will recognize on each boot?
View 7 Replies
View Related
Nov 28, 2010
Dual-Boot: Mac OSX and Ubuntu
Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp
https://help.ubuntu.com/community/Ma...elInstallation
View 3 Replies
View Related
Mar 27, 2010
I have finally decided to restore grub on my netbook after installing windows 7, and I can boot into UNR just fine but the Jolicloud option is now gone. How do I add it back to the GRUB menu.lst?
View 2 Replies
View Related
Aug 9, 2010
I just got to finish installing ubuntu lastest version on my new netbook, im really exited about how powerful it can get. The thing is, I'm still keeping my old Windows 7 partition and data, and I want to access it faster, editing the grub options, to change the timer on it, and the default booting option.
View 6 Replies
View Related
Jan 23, 2011
I have 3 linux partitions
/
/boot
swap
Here's the story
1) was running ubuntu 10.10 64bit with burg
2) Installed windows 7.. it got removed.
3) So boot via ubuntu usb and ran
sudo mount /dev/sda7 /mnt/home
sudo mount /dev/sda4 /mnt/boot
sudo grub-install --root-directory=/mnt/boot /dev/sda
reboot
now its stuck at grub> .. I am unable to fix this issue How can I get my grub / burg running again with windows as option currently to boot i do
grub> root (hd0,1)
grub> chainloader +1
grub> boot
I am sure I have grub2
View 5 Replies
View Related
Jun 9, 2010
I have installed 10.04 from scratch (fresh install) and I am unable to change the default option of grub using the keyboard. while booting
View 7 Replies
View Related
Jul 27, 2010
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
View 3 Replies
View Related
Mar 27, 2010
I'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
View 4 Replies
View Related
Jan 12, 2011
I had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
root@support-Latitude-E6400:/home/support# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
title=Windows 7
rootnoverify (hd0,6)
makeactive
chainloader +1
When i try to boot from windows 7, i get the following error. Error 12: invalid device request. How can i get my laptop to boot from windows again?
View 9 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
May 2, 2010
Upgraded one box that has 2 drives in it to 10.04 no problem.Tried doing my other box today, and it won't give me the option to format the /dev/sda drive (first drive), only gives me /dev/sdb as an option./dev/sdb is my media drive. /dev/sda is where the previous version of Ubuntu was installed and I need to be able to install to that drive.When I boot the live cd instead of installing, I see both drives under the "Places" menu, so I know ubuntu sees both drives.
View 6 Replies
View Related
Nov 4, 2010
I am attempting to install Ubuntu via a USB stick. I have Ubuntu on the USB, I have booted from the stick and I have made it to the installing window. My problem is, I do not get the option to install next to other operating systems, which is what I want.If I have not been clear enough then please let me know and I'll see what I can do.
View 6 Replies
View Related
Dec 28, 2010
No option to install alongside another OS. I have Win7 Starter on this new netbook and need to install Ubuntu 10.10 netbook addition. Disk Management shows 4 partitions, one is C:, one is D:, and two I've never seen before they're so small. Is it safe to delete these or do they have a purpose for the current Win OS? I would gladly install the 10.10 to my D: drive which seems to be SDA2, the 131GB partition. What's the right sequence of partitioning and formatting to give Ubuntu the full install it needs manually? And what needs to be taken care of for a Swap drive?
View 9 Replies
View Related
Oct 14, 2010
I am installing ubuntu on a Dell m7750n machine that has the KSOD. I have done almost everything I can find to fix it. I was able to remove my data off of it using regedit....
So, I am sick of MS and found linux. I installed unbutu netbook on my netbook and it works like a charm.....
So, I went to install this on my desktop dell.... I have read of the many issue with this...
I was not able to boot from the CDlive as is. I kept getting a black screen with nothing. I then used the f6 to get into grub and then choose f6 to change the load options to load nomodeset and was able to load ubuntu from the drive, not install.
I would like to install ubuntu, but when I click on install from the 'tester' version it will not give me the option to install along side another OS (windows) that I see in the install ubuntu main website in the see how to do it.
I get two options:
Erase and use entire disk
Specify partitions manually (advanced)
Question: Can I install and select my own partitions using: [url]
Or, is there something wrong and I need to get that fixed before I install ubuntu?
Is this a DELL issue or KSOD issue?
View 9 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Jul 15, 2010
I used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
View 1 Replies
View Related
May 14, 2011
I have downloaded Kubuntu 11.04 Desktop ISO. When I fire up Wubi then there is no Install inside Windows option! Why?
View 4 Replies
View Related
Jan 31, 2009
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
View 2 Replies
View Related
Nov 21, 2010
I am trying to use a F14 network install CD to upgrade on an old HP Pavilion 9695C (Athalon 850MHz, nVidia NV5 RIVA TNT2/TNT2 Pro AGP) with F12 on it. This same disk successfully upgraded a HP Omnibook 6000 with F12. I boot with the network install CD and get the initial menu to select to install/upgrade, install using basic video driver, etc. After selecting either upgrade or basic video driver install, I see the CD being read, then nothing, just a blank screen. I had a similar problem with F12 network install on this machine. So I tried adding "vga=0x318 nomodeset" to the upgrade boot options. The only difference is a quick flash on the screen, then a blinking "underscore character" cursor. The "install using basic video driver" has the same result.
Have also tried:linux nofb
vga=791 [nomodeset]
vga=1 [nomodeset]
xdriver=nv nomodeset
xdriver=vesa nomodeset
However, I always end up with a blank screen or blank screen with blinking underscore cursor. I know this particular AGP has problems with the nouveau driver. On F12 I had to force it to use the nv driver. I submitted a bug but there was no interest on it as this was F12 and F13 was the latest at the time. I did try to upgrade to F13, but ran into this same problem. I was hoping F14 would be better.
View 11 Replies
View Related
Feb 8, 2010
I burned a live c.d of debian 6 today, it works really great but there is no option to install it. I've done lots of installs off c.ds where it says " install" right at boot up, as on option. is there a way to install this?
View 3 Replies
View Related
Jul 21, 2010
Got it on a CD and was using it as "Try Ubuntu" instead of installing it for good (I still wanted to see if there were memory issues or HDD issues with my desktop, before I installed it for good).Anyway, I would shut down the pc after about 2 or 3 days and redo the CD install (try ubuntu option) again and add all the plugins etc.Kids used this for playing some games on friv or nickjr.The real issue - of late, when I try to start the PC and boot from the CD, I am getting a LOGIN screen instead of the regular option to install from CD or Try the Ubuntu.
View 9 Replies
View Related
Jul 16, 2015
I got a Lenovo T430s and when I boot up the USB I am presented with different options like
install
install graphical
install 64
install 64 graphical
etc
When I pick one and hit Enter I am presented with a black screen.
View 6 Replies
View Related
