Ubuntu Installation :: Neither USB Nor DVD Recognised When Booting From Macbook?
Jun 17, 2010
I'm trying to install Lucid on a Macbook 4,1. I've got both a DVD and a USB (created using Ubuntu instructions and USB Startup Disk Creator) with ubuntu-10.04-desktop-i386.iso on them. (Is this the wrong version to use, maybe?)
There are three different ways I've come across to boot from a USB or DVD, and none of them work:
1) System Preferences > Startup Disk: when I do this, only the Mac's harddrive and 'Network Startup' are available as options for booting. Even when the USB and/or DVD are inserted and are showing up on the desktop, they aren't available as options in Startup Disk.
2) Hold down 'C' when the computer is booting up to boot from a disk: this doesn't seem to do anything.
3) Hold down 'alt/option' when the computer is booting up to get a list of boot options: a list appears, but the computer's hard drive is the only option. Neither the DVD nor the USB show up.
View 3 Replies
ADVERTISEMENT
Jul 22, 2011
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
View 2 Replies
View Related
Nov 18, 2010
I would like to triple boot my Macbook Pro. I don't want to use rEFIt. Although it worked on my iMac, it would randomly not load the OS's sometimes.
1. Is there a way to use Boot Camp?
2. I know how to use Mac with the windows xp bootloader. How can i put Ubuntu in too? I got this thing about taking 512 megabytes of the bootloader grub or something like that but I don't get it.
View 1 Replies
View Related
Aug 20, 2009
I screwed something up and my macbook no longer boots up - hanging before gdm with msg: NETADDRCONF eth0 not found NETADDRCONF wlan0 not found(not connected to network)problem happened after I tried to fix the flaky mouse with following:
* I created a conf file and added a inputdevice section with touchpad options
* I also created an appletouch.fdi file with op0tions
* I also created an applesmc module
if I can figure out how to boot into failsafe then I could back out changes but at this point I cannot even get there
View 2 Replies
View Related
Feb 1, 2010
Few days back i was searching for triple booting my mac through this ubuntu forum.and i ran into command name bless
it was like : bless /dev/disk0s3 --setboot -- device --verbose
i ran it on the terminal after booting it from a Leopard installation DVD in a hope to run linux on my macbook(macbook white..intel m/c 160gb HD..2 GB RAM) after trying all the stuff and eventually everything has stopped booting neither leopard nor windows. i can see the grub for ubuntu loading up but after selecting the option for ubuntu, ubuntu is also not working.
i was using refit as well.i cannot even boot from my leopard installation dvd..windows that was priorly installed using bootcamp is corrupted too.
View 7 Replies
View Related
Feb 3, 2010
I am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies
View Related
Aug 4, 2011
I am having problems with triple booting my system. The original Linux OS I started out with was Ubuntu, which I was able to triple boot in the desired configuration (Mac OSX, Unbuntu, and Windows XP) after several tries (the instructions I got weren't quite right). I am now trying to install openSUSE instead of Ubuntu. However, if I install openSUSE before Windows XP, Windows XP erases my installation. If I install it afterwards, it seems to erase Windows XP, as it becomes unbootable thereafter. Perhaps this is because I am following the instructions for installing Ubuntu (format partition 3 as Ext3, mount it as /, and install the grub boot loader inside that partition), without modifying much else. I can't seem to find any good instructions online to tell me what else to do.
the instructions on installing Ubuntu screwed up because it said I had to install Windows XP first, before installing Ubuntu. I found out it was the other way around. Also, while Ubuntu was installed, all three partitions showed up on disk utility (although the Linux partition wasn't a recognized file system). However, every time I've installed openSUSE, where the partition should have been showed up as empty space on disk utility.
View 9 Replies
View Related
May 13, 2010
Since i upgraded to 10.4 my printer doesnt work. My Canon IP 4200 printer is attached via USB. If i turn it on nothing happens.
I look in the online help it says CUPS isnt running. How do i turn this on? I cant find it.
View 3 Replies
View Related
May 16, 2010
I tried to use the automatic upgrade to version 10 last night on my Acer Aspire 8930G. Everything seemed to work fine until I got to the reboot. At the reboot it tells me that it is running in low resolution mode because the nvidia drivers have been removed. That is fine except I cannot hit the enter button to accept the message either using the laptop keyboard or by restarting and using a USB keyboard.
I have a dual boot with windows and I'm averse to just reinstalling ubuntu because there is some data which would be annoying to lose.
View 9 Replies
View Related
May 26, 2011
I downloaded debian-6.0.1a-ia64-netinst.isoI burned this to a CD using wodimPopped the CD into a new desktop computer, pushed the power button and get the message:Robeet and Select proper Boot deviceor Insert Boot Media in selected Boot device and press a keyI thought it might be something to do with the writing of the CD so I went to a Windows laptop, copied the ISO image over and then wrote the image to another blank CD on this machine. Tried booting this and received the same message.
The new computer will boot from other CDs, as I have an older Windows XP boot disk and that works just fine.What else can be wrong...??? Is the image valid? Has anybody else successfully downloaded and boot from this image? I kind of expect so but I don't know - maybe it's still really new.I have downloaded and installed Debian previously using this method, however back then I was using the i386 image. This time I checked and my cpu and board, the Intel 64 bit architecture should be fine so I don't see why I shouldn't be using this version.
View 2 Replies
View Related
Jun 11, 2009
I'm reasonably noob to Linux but now seriously confused Installing F11 onto a Dell Precision 490, 4GB RAM and 250GB WD2500YS. I get through to drive partitioning and there is no drive listed. Especially odd as the drive is running F10 quite happily. Reconnect a Seagate Barracuda 500GB and restart, this is seen and is the only drive listed even though it is SATA1 not SATA0. Boot the F10 installation DVD and that recognises both drives! I have tried both AHCI and ATA modes with the same results. Can anyone point me in the right direction or do I go out and get another Seagate drive, no I can't use the existing one.
View 8 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Jul 6, 2010
I just wanted to express my opinion of Ubuntu 10.4, so far I am extremely impressed with the OS. I have a Macbook with OSX and Windows 7 installed using refit as my EFI boot manager. I downloaded Ubuntu 10.4 and burned it to a CD and it installed perfectly with no problems! In fact, as far as I can tell all devices such as audio, Bluetooth, video, wireless, track-pad, and everything else I tested seem to work just great! After using disktool in OSX to resize and add another free partition and installing Ubuntu 10.4 the refit manager automatically added the Linux partition and away it it went!
View 1 Replies
View Related
Dec 2, 2010
I have both a bootable USB install of 10.10 Desktop, which I've confirmed on my netbook (which runs Ubuntu) works fine, and a CD install disk, and my MacBook will not boot the USB and the CD isn't working right. I have a flaky superdrive, which is why I'm attempting the USB approach as well. I burned the CD from my son's computer and I'm sure it's fine.
I'm running Leopard 10.5.8.
View 2 Replies
View Related
May 10, 2011
I try to install ubuntu 11.04 to my macbook(running MAC OS 10.5.8 ) using usb drive. I followed the instruction on the download page and transferred the ISO to usb drive. but when I restart the mac, holding option, I can not see option of boot with usb drive. there is only one option that is boot with my hard drive. my macbook is almost three years old, but I am sure the usb should work, since I have installed MAC OS using usb drive.
View 4 Replies
View Related
Jan 4, 2010
I installed Ubuntu 9.10 desktop x86 on my macbook pro, I selected erase and use entire harddisk, after install, I restarted, but there is only a flashing question mark on a gray background screen, if I press option when power on, I can select a disk called "windows", then it boots into ubuntu, I wonder what is the problem?
View 1 Replies
View Related
Jun 19, 2010
I am trying to install Ubuntu Netbook 10.04 on my eee pc. I have a macbook pro with built in SD card reader and a 4 gig sd card. I followed the instructions on the ubuntu netbook download page to create the bootable usb media and it appeared to work, but was not bootable for either the eee pc or the macbook.
I also posted under the apple section of the forums here: [URL]... I also tried using VirtualBox to create a virtual machine that I could install ubuntu directly onto the SD card, but VirtualBox can't work with the built in SD card reader apparently.
View 2 Replies
View Related
Feb 18, 2011
I am excited to install linux on my macbook air and have been trying to boot with a kingston 4gb usb drive but when I try to boot with it (holding down the option key on reboot) only the Hard drive shows up for me to boot up on.. not the usb drive.. how do I format the usb drive to be bootable in this case?
View 1 Replies
View Related
Jan 31, 2010
I downloaded the current F12 DVD iso on my macbook to install on my Dell 450 Intel Xeon 3.00GHz, but I cant figure out how to verify the download. The Fedoraproject/en/verify does not mention mac, and the command is not working in the mac terminal.
View 6 Replies
View Related
Apr 29, 2015
I did an install of Jessie on a Macbook 2,1 to be the machine's only operating system, but it won't boot, showing only a black screen with a blinking cursor. I think the problem is caused by a mistake I made during the installation process, where I selected yes for the prompt:This machine's firmware has started the installer in UEFI mode but it looks like there may be existing operating systems already installed using "BIOS compatibility mode". If you continue to install Debian in UEFI mode, it might be difficult to reboot the machine into any BIOS-mode operating systems later.
If you wish to install in UEFI mode and don't care about keeping the ability to boot one of the existing systems, you have the option to force that here. If you wish to keep the option to boot an existing operating system, you should choose NOT to force UEFI installation here. Force UEFI installation?
View 9 Replies
View Related
Jun 15, 2010
I tried to install Fedora 13 on my MacBook Pro 13" but I get the following error:
The exact procedure is as follows:
- Boot from CD
- Start Live CD menu
- During loading live CD I get this error:
"ata 2: COMRESET failed (errno=-16)"
"ata 1: COMRESET failed (errno=-16)"
- The loading continues..
- At the end I get:
"No root device found"
"Boot has failed, sleeping forever"
View 3 Replies
View Related
Aug 21, 2011
I can't seem to get the sound working on my MacbookPro with Fedora 15. I tried the old options hda-intel-sound model-mbp55
Code:
[brad@bmp modprobe.d]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
[code]....
View 1 Replies
View Related
Aug 27, 2011
Last night I downloaded the iso for the full DVD install with the intention of installing it from the hard drive. Since my old Fedora Core 2 system is down right now I have the iso on my MacBook.How do I perform the 256 check sum on the MacBook? I tried the shasum -a 256 but I'm not sure it's doing the right thing.
View 1 Replies
View Related
Sep 11, 2009
Big fan of the CentOS and have been using it on my renderfarms and workstations for a long time so naturally it's my linux of choice now that I've finally decided to dual boot my macbook pro. My macbook is the last model before they went with the unibody design so I think it's the 4.1 version (or some such designation). I can run Kubuntu and Fedora's live CDs, and I can get to the Suse installer as well. The problem with CentOS is a mystery to me because its hanging before getting to the installer. The last thing it reports is that it's running the loader and then it sits. I get the same results if I choose the text installer and the only difference the noapic option produces is an extra message that it's "Disabling IRQ #11".
View 4 Replies
View Related
Apr 14, 2010
I would like to clone an existing desk top installation of Ubuntu Ultimate Edition and run it on my MacBook, can it work? What do I have to do to get it running there?
View 1 Replies
View Related
Apr 29, 2011
I've tried to install 11.04 on my Macbook Pro (5,4) today. I had two drives in the machine, an SSD as my main drive, and an HD. I installed rEFIt before attempting to install Ubuntu. I moved my Snow Leopard install to the secondary HD & made sure I could boot to it. Then, I used the live CD & gparted to clear the 1st drive (the SSD), create the swap space, create the Ubuntu partition, and launch the install, where I used what I had just created on the SSD. The install completed okay (but with no option to select where the GRUB installer went, like some tutorials tell you to look out for). This seemed to go okay, so I went to restart at the end of the install, but the machine didn't come back up.
Instead, the power came on & I could hear the drives, but the screen stayed black, the battery light flashed a load of times really quickly (too quickly to count, but at least 10 times), and then the machine let out 1 long beep and stayed on the black screen. I forced it to power down & tried again, and just got a black screen, the battery light shining steadily, and no beep. I forced it to power down again, and got the same, then again, and got the same, and then a 4th time, which actually allowed me to boot. And this has been the pattern since then. I shut down, and my first attempt to restart gets me the flashing light and the beep, with the black screen. I try 3 more times to power down and restart, and just get the black screen. Then, *every* time on the 4th time, I'm allowed to boot.
The same routine will be gone through the next time I power down and try to restart. I've tried totally clearing the disk in gparted, restoring the OSX install from TimeMachine, everything I could think of, but all to no avail. Finally, thinking that maybe the OSX install I had safe on the secondary HD might still be okay (looking at it in gparted showed an EFI boot section & everything), I opened up my MBP, swapped the drives around so that the HD is now the main drive, and the SSD the secondary, and renamed the drives so that the primary HD is now called 'Macintosh HD' and is first in the list of drives that appear when I manage to boot each 4th attempt. But, to my great disappointment, I still got exactly the same error. Can anyone offer any advice on how to:
1) Get my machine booting to a safe Snow Leopard install on the (now primary) HD?
2) Safely install Ubuntu on the (now secondary) SSD?
Obviously the first is a top priority, as I need my machine in order to work! Then I can concentrate on moving my dev environment to Ubuntu, which I've been dying to do for ages.
View 6 Replies
View Related
Mar 10, 2011
I tried installing a live version of Debian Squeeze 6.0.0 for the i386 architecture. I am using a first generation MacBook Pro (Intel Core Duo, not Core 2 Duo).
I managed to boot the live cd and install everything using the "guided installation" option, using the whole drive for Debian (I don't have the Mac OS X Snow Leopard disc so I just wanted to install a strictly Debian system). I installed GRUB to the master boot-record, but after finishing the installation and rebooting I was confronted with the dreaded "question mark". After doing a bit of reading, I found that I should have installed the EFI LILO bootloader to the MBR instead of GRUB, so I reinstalled everything, choosing this option instead. But that didn't work either. More question marks. I imagine I must have to configure either of these bootloaders in the shell, but I don't know how to go about doing this.
How to do this without using a Mac OS X installation disc.
View 7 Replies
View Related
Jan 24, 2011
I have the Fedora 14 64bit Live CD on a 4GB USB Flash drive, via Live-USB-Creator. I have bootcamp installed on my Macbook Pro (5,5) with OSX, Windows 7, and Ubuntu already installed. I plan to install Fedora over the Ubuntu.
1.)So, when refit boots up, I choose the EFI USB (Fedora) and the Fedora screen comes up.
2.) I click any key to dismiss the auto boot
3.) I click "e" to edit the Fedora kernel, then I edit the first option and add the line "nomodeset"
4.) I press enter, and then "b" to boot that line. The screen kind of goes whack and a fair amount of super small (unreadable) text comes up on the screen and then just hangs with the blinking (_)
If I go into Grub via "c", and type in "nomodeset" it gives me an Error 27 Unrecognized command. And I've read online to press TAB to go into grub, but TAB does nothing for me.
View 4 Replies
View Related
Jun 10, 2009
I have installed grub.efi in the ESP partition which is able to load ubuntu 9.04.I think it works with fedora 11 x64 as well. And I tried to install fedora in the partition which was used to install ubuntu. But the installer keep telling me that ext4 partitions are not bootable. But I don't need to install a boot loader on that partition
View 4 Replies
View Related
Aug 12, 2010
FC13 and Ubuntu 10.04 - both 64bit. Hardware: MBP 5,4 Here's how I do the install:
1. Boot to Ubuntu LiveCD and wipe disk.
2. Create a msdos partition table via gparted
3. Reboot from FC13 or Ubuntu install disk and continue to install with installer suggested partition scheme.
4. Reboot and get an error that says "uncompression error -- System halted"
Variation that I have tried:
1. After #3, boot into FC13 or Ubuntu rescue mode, chroot to hd image and run:
# grub
> root (hd0,0)
> setup (hd0)
> quit
2. Create a 250MB partition where I installed refit and use rest of the disk for Ubuntu or FC13. After installation, both Ubuntu and FC13 halt at the same error.
3. gptsync fails with no refit installed. Finds GPT table empty. LiveCDs from both distros work fine so ruling out hardware issues like bad memory etc.
View 1 Replies
View Related
