Ubuntu / Apple :: Triple Booting On A Macbook Pro?
Nov 18, 2010
I would like to triple boot my Macbook Pro. I don't want to use rEFIt. Although it worked on my iMac, it would randomly not load the OS's sometimes.
1. Is there a way to use Boot Camp?
2. I know how to use Mac with the windows xp bootloader. How can i put Ubuntu in too? I got this thing about taking 512 megabytes of the bootloader grub or something like that but I don't get it.
Few days back i was searching for triple booting my mac through this ubuntu forum.and i ran into command name bless
it was like : bless /dev/disk0s3 --setboot -- device --verbose
i ran it on the terminal after booting it from a Leopard installation DVD in a hope to run linux on my macbook(macbook white..intel m/c 160gb HD..2 GB RAM) after trying all the stuff and eventually everything has stopped booting neither leopard nor windows. i can see the grub for ubuntu loading up but after selecting the option for ubuntu, ubuntu is also not working.
i was using refit as well.i cannot even boot from my leopard installation dvd..windows that was priorly installed using bootcamp is corrupted too.
I am having problems with triple booting my system. The original Linux OS I started out with was Ubuntu, which I was able to triple boot in the desired configuration (Mac OSX, Unbuntu, and Windows XP) after several tries (the instructions I got weren't quite right). I am now trying to install openSUSE instead of Ubuntu. However, if I install openSUSE before Windows XP, Windows XP erases my installation. If I install it afterwards, it seems to erase Windows XP, as it becomes unbootable thereafter. Perhaps this is because I am following the instructions for installing Ubuntu (format partition 3 as Ext3, mount it as /, and install the grub boot loader inside that partition), without modifying much else. I can't seem to find any good instructions online to tell me what else to do.
the instructions on installing Ubuntu screwed up because it said I had to install Windows XP first, before installing Ubuntu. I found out it was the other way around. Also, while Ubuntu was installed, all three partitions showed up on disk utility (although the Linux partition wasn't a recognized file system). However, every time I've installed openSUSE, where the partition should have been showed up as empty space on disk utility.
I have an Intel iMac that has about 500 GB of unused space and I was wanting to install Ubuntu or Ubuntu studio or any Linux distro on about an extra 50 - 100 GB of space. I currently have the iMac with a windows bootcamp partition on it as well. Is it too late to partition the main partition and install Ubuntu on it without having to erase it and reinstall the Mac OS and Windows on it? Also, I wanted to try Ubuntu studio on a live CD, but when I hold C and bring up the preboot environment then I don't see an option to "try Ubuntu without changing anything".
I am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
I would like to install Opensuse 11.4 on my macbook pro to do a triple boot. I found lots of tutorial on Ubuntu but not on Opensuse, and this facility is the same way?
This is my first post to this forum! I'm just getting into openSUSE and really excited to get involved in it. I have a MacBook running OS X 10.6 (Snow Leopard) that I triple booted using Disk Utility. I installed openSUSE, (not WFindows yet), and have it set up to load using reFIT. reFIT can see that openSUSE is installed, but when I choose to load it it displays the following error message:
"No bootable device -- insert boot disk and press any key" I have the feeling there is something very simple I'm doing wrong I know this post isn't extremely detailed to please let me know whatever other information I should provide.
I am using Mac Pro with MacOS + Vista 32bit +Ubuntu installed. Using rEFIT with lilo bootloader. I want remove Vista 32bit and install 64bit Windows 7 instead. I am afraid of trying to install Win7, because it may delete bootloader. How can I remove Vista and do a clean install of Win7 to my Mac Pro without losing ubuntu and MacOs?
I've been tinkering for over a week to try and get a functioning triple boot + shared data working. i've hit a road block. i'm using reFIt with SnowLeopard/W7/10.10. i can't get into ubuntu
*** Report for internal hard disk *** Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 390772495 Mac OS X HFS+ 3 391034640 781659639 Basic Data
[Code].....
OSX and Windows are fine. but whenever i select linux, it boots directly into windows. i'm hoping i don't need to install GRUB2 to the windows partition as that would defeat the purpose of reFIt (would it not?)
I've been running Ubuntu for some time on an old MacBook 3,1. It has been a happy OSX / 10.04 dual boot. I'm attempting a triple boot: OSX / Ubuntu 10.04 / Ubuntu 10.10. The partition scheme is similar to this, I've lost exact partition sizes:
I've got a mate that wants to put windows 7 dual boot with osx on his mac book pro. I have talked him into putting Ubuntu on as well I just don't know how and in what order. So what is the best way to do it? Any good websites/tutorials?
I'm trying to get a triple-boot setup working with rEFIt and OSX 10.6.5/Win7/Ubuntu 10.10. I'm finally to a point where rEFIt shows a OS X, Windows, and Linux option but the Linux item boots up windows. I just finished booting the live CD and installing grub on the ubuntu partition, but rEFIt is *still* booting windows with the Linux menu entry (and no new entries have appeared since the GRUB reinstall).
Here's what the rEFIt partition inspector is currently showing - can anyone spot any problems? Note: Currently I have 5 partitions (OS X @ 60GB, Win @ 120 GB, Ubuntu (swap) @ 2 GB, Ubuntu @ 58 GB, and a general storage partition (formatted in OS X's HFS).
Code: Report for internal hard disk
Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 117597143 Mac OS X HFS+
My laptop had Vista, I installed Lucid so I'm dualbooting with GRUB, and I'm wondering if anybody knows of a way to triple-boot with Mac OSX. Thanks in advance.
I've got a Macbook Air and a verified 9.10 liveCD in the external superdrive. I can successfully boot to the CD, but when I choose "try ubuntu without installing", all I get is a blinking cursor in the upper-left of the screen forever. Any idea why it won't start? CD works fine on my Dell, that's why I say it's verified.
Today i went ahead and installed ubuntu on my windows desktop pc. I tryed the live cd and tested it out and everything was fine i then installed it using wubi. I then wanted to install it to my macbook ( bought in june 2009 ) and i booted the live cd and chose try ubuntu without any change to your computer. It booted a black screen with a white _ at the top then the screen went white and did nothing. I tryed it several times and nothing happend. I then said ok il maybe just try install it through wubi on my bootcamp partition and it all went fine until i got to the windows bootloader and chose ubuntu, it camp up finishing linux installation and where its meant to change and show the ubuntu symbol after ( i know because i've installed ubuntu on the pc) the screen went white. Nothing.
I have a first generation Macbook that shipped with Tiger. I don't often use the os x partition anymore, as I installed Windows XP on a 15 gig partition back when bootcamp was still in beta and I normally use that when I'm on my laptop. Since Tiger is rather old and the only reason I would want to upgrade to leopard is to have access to bootcamp again (they disabled access to the bootcamp application in os x, but I can still boot into windows), I have been thinking about wiping out my os x installation and using ubuntu instead. Does anyone have any thoughts on the pros and cons of totally removing os x?
The main reason I hesitate to just jump in and do it is because if I decide to install os x again I won't be able to install bootcamp again, unless I buy leopard. If I wipe out os x and install ubuntu, will I still be able to access windows in the same way? Windows uses bootcamp drivers to run properly, so I have never quite been sure if it is pulling something off of the os x partition or if it is totally standalone.
I have just installed the latest Ubuntu 10.4 LTS on my Macbook Pro and the one thing I cannot get to work no matter how much i try the fixes and suggestions they do not work. I have the volume controls, even the ones on the keyboard work but there is just no audio what so ever.
I get through the install just fine till the end Iv tryed twice. When i get to the "Who Am I" screen i fill out all the info the "Forward" Button doesn't light up, it keeps on installing till "Ready when you are" and then i'm kinda stuck.. I can go back to past screens and edit the info and stuff but thats it can't move on.
When I installed I noticed no sound was emanating from my computer and a red light coming out the headphone jack. s there any reason why there wouldn't be any working sound? Everything else seems to be working fine. I installed the additional drivers but the only ones listed were graphics and wireless.
Introduction: I wrote a very extensive and quantified tutorial and informational guide aiming to upgrade the latent information from the wiki's on MacBook Pro 5,2. An accidental toe tap ended with me bumping my head and pressing the X button on firefox. What happen had to be 1 out of a billionth of a chance. So this version will be simple and to the point, until I can muster enough patience to detail it all out again. Please correct any errors.
sudo apt-get install pommed - To get backlight keyboard working. sudo apt-get install cheese - To get iSight working. sudo apt-get install lirc - to get remote working (tested in XBMC) sudo apt-get install bluemon - Pairs Mighty Mouse and Wireless Keyboard (optional)
I have installed it on my Macbook Pro 5.5 via rEFIt+ and the install works well except for the lack of sound. I've seen this issue posted about on the forums and I've followed the advice posted here as best I can with my limited knowledge. Terminal didn't recognise the aptitude (command not found). I guess that may be due to an older build of Ubuntu being used in the example?
I have downloaded the 64 bit iso and burned the CD-ROM per the instructions. The CD is verified. When I boot the mac, holding down the C key, I get a menu of options relating to Ubuntu. If I choose the trial run from CD then the CD drive starts up but the screen goes blank and I end up with just a blinking underline cursor in the upper left hand corner of the screen. Does anyone known if one can, and if so how, to boot the live CD on a Macbook Pro 5,2?
The wiki says there is a way to install from usb but I can't get it to work on my Macbook Air 3,2 (the Nov 2010 revision, not the one from last week).
My goal is to dual-boot OS X and Ubuntu, but I can't get the Ubuntu installer to boot. I've tried a lot of variations on the instructions I've found, so I get the feeling I'm probably missing something fundamental.
I installed refit and used BootCamp to partition the drive. I downloaded desktop/alternate and i386/amd64 isos. I tried to follow the instructions to use unetbootin on OS X to install the ISOs to my USB drive, but neither drive that I connect appears in the "Drive:" selector when on OS X. I used usb-creator-gtk and unetbootin on an Unbuntu machine to try each of the four ISOs.
When I try to boot the Air from the USB drive, I got a few different types of failure:
gpt, single fat partition, unetbootin -> alternate amd64 result: "Non-system disk" "Press any key to reboot" mbr, single fat, unetbootin -> alternate amd64 result: black screen, fan runs at 100% after a minute or two
[Code].....
I tried dd'ing a disk image to my new partition as described here and here with the desktop amd64 and i386 images, got a few different errors - once syslinux complaining "Error: No configuration file found" when the drive I dd'd from wasn't properly unmounted before bringing it to the Air, once I chose the drive in refit, refit displayed the single logo, and it never booted, and once I got an error I didn't copy down about needing a boot floppy.
Has anyone successfully booted Ubuntu from USB key on the Air? Exactly how did you prepare which image?
I've been trying to install 11.04 on my MacBook Pro for the past couple weeks, and I'm getting pretty frustrated with it. When I try to boot from a DVD, I either get a blank screen with just a flashing cursor, or it will ask me if I want to try, install, or verify the disc, after which I will get a bunch of different-colored blocks all around the screen.
I have installed past versions of Ubuntu on this computer with no problems, so I'm pretty stumped now on why I'm having this problem. Also, I've tried the Ubuntu Wiki and sticky thread on this forum, but nothing in either seems to help. Additionally, I have installed Mac OS X 10.7 Lion. I don't think it'd effect anything, but I thought it was worth mentioning.