OpenSUSE Install :: Triple Booting Mac OS X.6 And Windows XP On Macbook Pro 7.1
Aug 4, 2011
I am having problems with triple booting my system. The original Linux OS I started out with was Ubuntu, which I was able to triple boot in the desired configuration (Mac OSX, Unbuntu, and Windows XP) after several tries (the instructions I got weren't quite right). I am now trying to install openSUSE instead of Ubuntu. However, if I install openSUSE before Windows XP, Windows XP erases my installation. If I install it afterwards, it seems to erase Windows XP, as it becomes unbootable thereafter. Perhaps this is because I am following the instructions for installing Ubuntu (format partition 3 as Ext3, mount it as /, and install the grub boot loader inside that partition), without modifying much else. I can't seem to find any good instructions online to tell me what else to do.
the instructions on installing Ubuntu screwed up because it said I had to install Windows XP first, before installing Ubuntu. I found out it was the other way around. Also, while Ubuntu was installed, all three partitions showed up on disk utility (although the Linux partition wasn't a recognized file system). However, every time I've installed openSUSE, where the partition should have been showed up as empty space on disk utility.
View 9 Replies
ADVERTISEMENT
Mar 21, 2011
I would like to install Opensuse 11.4 on my macbook pro to do a triple boot. I found lots of tutorial on Ubuntu but not on Opensuse, and this facility is the same way?
View 3 Replies
View Related
Nov 18, 2010
I would like to triple boot my Macbook Pro. I don't want to use rEFIt. Although it worked on my iMac, it would randomly not load the OS's sometimes.
1. Is there a way to use Boot Camp?
2. I know how to use Mac with the windows xp bootloader. How can i put Ubuntu in too? I got this thing about taking 512 megabytes of the bootloader grub or something like that but I don't get it.
View 1 Replies
View Related
Jun 25, 2010
I'm trying to Triple Boot my MacBook pro(Mac OS, Win 7, and opesSUSE).I installed Mac, Win, and openSUSE last.I have a few questions here:
1. Do I use GRUB or LILO?
2. Do I select "Root Partition in sda3"?
3. After installing the openSUSE, the rEFIt Menu become weird:
I enter Win selectioon, and then there's Grub selection again.
4. I enter Linux selection, and there's also Windows selection at the Grub.
5. Is my swap files working?
View 9 Replies
View Related
Jun 6, 2011
This is my first post to this forum! I'm just getting into openSUSE and really excited to get involved in it. I have a MacBook running OS X 10.6 (Snow Leopard) that I triple booted using Disk Utility. I installed openSUSE, (not WFindows yet), and have it set up to load using reFIT. reFIT can see that openSUSE is installed, but when I choose to load it it displays the following error message:
"No bootable device -- insert boot disk and press any key" I have the feeling there is something very simple I'm doing wrong I know this post isn't extremely detailed to please let me know whatever other information I should provide.
View 3 Replies
View Related
Feb 1, 2010
Few days back i was searching for triple booting my mac through this ubuntu forum.and i ran into command name bless
it was like : bless /dev/disk0s3 --setboot -- device --verbose
i ran it on the terminal after booting it from a Leopard installation DVD in a hope to run linux on my macbook(macbook white..intel m/c 160gb HD..2 GB RAM) after trying all the stuff and eventually everything has stopped booting neither leopard nor windows. i can see the grub for ubuntu loading up but after selecting the option for ubuntu, ubuntu is also not working.
i was using refit as well.i cannot even boot from my leopard installation dvd..windows that was priorly installed using bootcamp is corrupted too.
View 7 Replies
View Related
Apr 6, 2010
I installed from a live CD when it came to selecting the partition I re-sized the partition that Ubuntu was on because it was 68 gigs I shaved off 15 gigs for SUSE. Then I selected this new 15gig partition to install SUSE on, everything went fine with the installation I was tinkering around on SUSE but of course I needed internet access, so I go to get on Ubuntu where I had my file with my network key. I restarted expecting to see the usual GRUB boot-loader screen only now with an added option for SUSE. Instead I see an entirely new layout for the GRUB boot loader and all that is listed is SUSE, Failsafe SUSE, Windows XP, and Floppy. The Windows is my XP install and it loads fine sadly it is actually what I'm using now because it is the only thing left that I have my network key saved so I can get on this forum.
Looking on SUSE I notice that the 50gig partition formerly known as Ubuntu still exists I figure no problem add the partition back on to the boot-loader and I'm good to go. Added it and when I select to load it nothing happens it starts to then reverts back to the OS list. Does anyone A) Know how to resolve this or have any ideas. B) Think I can at least copy files off that 50 gig partition to an external hard drive.
View 9 Replies
View Related
Aug 1, 2010
I'm trying to install (k)Ubuntu 10.04 side-by-side via Wubi, so that I can triple-boot Windows with the GNOME and KDE flavors of Ubuntu. Is there a way to install an OS to another folder?
View 1 Replies
View Related
Feb 11, 2010
I will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
View 4 Replies
View Related
May 2, 2010
I found this tutorial about dual booting Suse 11.0 & XP. Is it suitable also for Suse 11.1 & win7, or should I find another tutorial? Can you recommend a good tutorial for dual-booting Suse 11.1 & Win7 ? I've searched a lot but didn't find any.
View 2 Replies
View Related
May 13, 2010
I installed new OpenSuse11.2 but the windows(vista-64 bit) booting are missing
View 9 Replies
View Related
Apr 17, 2010
My Laptop Config is as follows.
Compaq Presario V3700
AMD Turion64
2GB Ram
Windows Partitions
/dev/sda1 == C: (WINDOWS)
/dev/sda2
[Code]...
I have been carrying out updates of both Vista & SuSE whenever i operate in them.
One (Not So) Fine Day, when i Choose from the Grub loader "Microsoft Windows Vista SP2" option it just din't boot into Vista. I have Tried many a time.
My First doubt was towards Vista only, so i choose the "Windows Recovery Mode" option from Grub. It went into the Recovery mode. I ran Memory Tests on Windows Partition, took its own sweet time, whatever missing indexes and all it carried out and finally gave the Thumbs Up result. After that, i carried out Startup Repairs, all came out well. So, Yet again i restarted and tried to get in Vista. Nope, dint work.
View 9 Replies
View Related
Jun 4, 2010
in my case, to delete primary and secondary win partitions (C and D) and so to add that empty spaces to my current openSUSE / and /home partitions. My linux root partition is a primary one as well so I guess that I can keep booting from it no matter if there isn't the C win drive any more.
Code:
Disco /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3bef74b8
[Code]...
View 4 Replies
View Related
Sep 8, 2010
I am currently running windows 7, i would like to be able to dual-boot with openSuse 11.3 64-bit, at the moment I have two seperate partitions each 111gb in size and i wish to install suse onto the D: partition without effecting my windows installation or any data on the c drive.
When i got to the "Discs" stage of the installation i was very confused by this as i am completely new to Linux and dual-booting, i thought it would be a simple case of selecting my d: drive and installing straight to that but i cannot work out how to do this.
View 7 Replies
View Related
Oct 17, 2010
While installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_
View 7 Replies
View Related
May 6, 2011
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
View 8 Replies
View Related
Nov 18, 2010
I'm trying to get a triple-boot setup working with rEFIt and OSX 10.6.5/Win7/Ubuntu 10.10. I'm finally to a point where rEFIt shows a OS X, Windows, and Linux option but the Linux item boots up windows. I just finished booting the live CD and installing grub on the ubuntu partition, but rEFIt is *still* booting windows with the Linux menu entry (and no new entries have appeared since the GRUB reinstall).
Here's what the rEFIt partition inspector is currently showing - can anyone spot any problems? Note: Currently I have 5 partitions (OS X @ 60GB, Win @ 120 GB, Ubuntu (swap) @ 2 GB, Ubuntu @ 58 GB, and a general storage partition (formatted in OS X's HFS).
Code:
Report for internal hard disk
Current GPT partition table:
# Start LBA End LBA Type
1 40 409639 EFI System (FAT)
2 409640 117597143 Mac OS X HFS+
[Code]..
View 1 Replies
View Related
Dec 24, 2010
I have an Intel iMac that has about 500 GB of unused space and I was wanting to install Ubuntu or Ubuntu studio or any Linux distro on about an extra 50 - 100 GB of space. I currently have the iMac with a windows bootcamp partition on it as well. Is it too late to partition the main partition and install Ubuntu on it without having to erase it and reinstall the Mac OS and Windows on it? Also, I wanted to try Ubuntu studio on a live CD, but when I hold C and bring up the preboot environment then I don't see an option to "try Ubuntu without changing anything".
View 2 Replies
View Related
Oct 15, 2010
Im trying to install Backtrack 4, XBMC live, and ultimate boot cd onto a 4gb usb flash drive and im wondering if my partition layout is acceptable for doing what i want to do, and im wondering how to install them to usb correctly (unetbootin doesnt work)
partition layout
100mb for boot
2.5gb for backtrack 4
700mb for UBCD
700mb for XBMC live
how do i install grub, or another boot loader that will read the adjacent partitions and boot them no matter what pc im on?
View 3 Replies
View Related
Nov 30, 2009
i'm trying to make my imac capable of triple boot.the software i use are:
mac os x 10.5.8
win vista sp1
linux opensuse 11.2
[code]....
View 9 Replies
View Related
Feb 7, 2011
I Currently have Windows 7 and Ubuntu 10.10 on dual boot system, but I want to change that. I want Win 7, openSuse 11.3 and Ubuntu 10.10 on a triple Boot. I have a 500gb sata hdd. The Rough Plan was to 150gb for Win7, 150 for openSuse 11.3 (50gb for / and 100gb for /home) and same again for Ubuntu 10.10 and 50gb for Swap. I am using entire drive for 3 Operating Systems and Swap. I have read a few guides and they all say install win7 then opensuse then ubuntu, and thats fine but none say anything about partitioning. And one main problem is cant split into more than 4 different partitions.
View 3 Replies
View Related
Jun 11, 2011
I'm a former Ubuntu user who jumped ship to Linux Mint. I currently am dual booting Windows 7 and Linux Mint 11 using Grub 2. Is there a way to install Fedora last? Much of the reading I have done suggests Fedora needs to be installed before Mint/Ubuntu. By the way, I have searched the forums and it has been suggested to wipe out Ubuntu, install Fedora and then re-install Ubuntu. I would much rather shrink the Windows partition and install Fedora before Mint and update Grub.
View 1 Replies
View Related
May 15, 2010
My laptop had Vista, I installed Lucid so I'm dualbooting with GRUB, and I'm wondering if anybody knows of a way to triple-boot with Mac OSX. Thanks in advance.
View 1 Replies
View Related
Jan 5, 2010
I'm triple booting (windows, ubuntu and osx86) at the moment but in order to load OSX86, I need to pass "cpus=1" to the kernel otherwise it won't load and the PC just reboots. Can I pass this argument from grub or do I have to install osx to a separate hdd and get grub to load the Darwin bootloader on the second hdd and then pass the argument?
View 1 Replies
View Related
Oct 25, 2010
Hey there. Currently my Toshiba laptop is dual-booted with windows 7 and Ubuntu 10.10 and I think I may try and triple-boot it with Snow Leopard. I'm not too familiar at all with hackintoshes so, how should I go about configuring a partition for the OS?
Also: is there any known problems running windows and a mackintosh OS?
If someone can give me some insight here I can also provide my computer's specs.
View 9 Replies
View Related
Nov 24, 2009
Got a macbook pro, how do I get Opensuse install on it. Partition has already been made..
View 4 Replies
View Related
Mar 10, 2011
This seems to be a variant of a problem many people have had, but after several hours trawling through various forums, I haven't seen a reliable match for my situation.In brief:Adding a third boot partition (of Ubuntu) to my existing dual boot of OSX 10.6 and Windows 7 seems to have crippled the Windows boot from working, because Grub apparently takes over the process. Yet Grub does *not* appear to be on the Windows partition.
More verbose:I have an older MacBook Pro (3.1, running Snow Leopard) that I recently refitted with a new 240GB SSD HD. With the extra space (it was previously only 120GB) I decided to add a dual boot with Windows 7 using bootcamp. This all went swimmingly well.Encouraged, I decided to follow this Lifehacker article's suggestion and triple-boot the machine with Ubuntu (I'd never used Linux before):So I now have the nice rEFIt boot partition selection screen, and, indeed, I'm up and running in Ubuntu, and enjoying it.
Only one problem: I can't get into Windows any more. If I try to go in through rEFIt *or* by holding down OPT at startup and selecting the windows partition directly, the result is the same: I get thrown into Grub's selector, and selecting the Windows partition from there leads to an error message and a dead end.Having read through numerous postings, I get the impression that Grub is doing something or living somewhere that it ought not to be, but in most cases I've seen, people had accidentally installed Grub onto the Windows partition (or indeed onto EVERY partition). So far as I can tell, this isn't the case with me. Here's my boot summary:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 9 Replies
View Related
Aug 3, 2010
One my macbook pro I have previously had 11.1 and Kubuntu Lucid working (mostly) fine*. I tried 11.3 - the install went fine but now the machine will not boot from the HD. The only way I can get it to boot is via the CD. The best diagnosis I can make is that the installation screwed up the partition table such that I cannot make refit gptsync. Simple put the GPT/EFI partition table (which is required to boot the mac) is out of sync with the MBR partition table (required by grub to boot suse 11.3). I have tried various disk tools from OSX, refit and linux (parted) and none makes any difference (parted is ignorant of the problem, OSX disk tool doesn't know about linux partitions, bootcamp won't touch the disk and refit says "analysis inconclusive, won't touch this disk"). It looks like I am screwed and will have to reformat the disk before reverting to lucid.
11.1 - no screen dimming, no sound, no wireless, no fn keys, poor trackpad, screen ok under kde 3
Lucid - mostly everything worked except for an infuriating "krandr" type problem when using an external screen for presentation (krandr etc were turned off but the screen kept trying to resize during movies). sound ok, screen dimming ok, fn keys ok, trackpad ok, wireless ok. Transition
kernel too old for comedi
11.3 - no screen dimming, no fn keys, no wireless and won't boot, runs hot, short battery life.
View 5 Replies
View Related
Mar 14, 2011
i'm trying to install OpenSUSE 11.4 on a Macbook Pro 5,1 (later 2008). From boot menu i have chosen all the possible options, but i always get the same result.
I began choosing 1024x768 and standard kernel and i get a black screen. Reboot. I chose VESA and kernel with security adjust. Black screen, then reboot. Finally, i chose VESA and kernel with no-apic and the installation wizard loaded. I configured all and OpenSUSE began to install, but when it was finishing, the screen turned black.
View 5 Replies
View Related
Aug 20, 2009
I screwed something up and my macbook no longer boots up - hanging before gdm with msg: NETADDRCONF eth0 not found NETADDRCONF wlan0 not found(not connected to network)problem happened after I tried to fix the flaky mouse with following:
* I created a conf file and added a inputdevice section with touchpad options
* I also created an appletouch.fdi file with op0tions
* I also created an applesmc module
if I can figure out how to boot into failsafe then I could back out changes but at this point I cannot even get there
View 2 Replies
View Related
