Last night I downloaded the iso for the full DVD install with the intention of installing it from the hard drive. Since my old Fedora Core 2 system is down right now I have the iso on my MacBook.How do I perform the 256 check sum on the MacBook? I tried the shasum -a 256 but I'm not sure it's doing the right thing.
View 1 RepliesI'm very much interested in running Ubuntu (64bit) on the new 15" macbook pro (8,2), but I would like to get a bit more info about it. So if you own a 15" macbook pro.
Following questions:
1) Can you switch of the AMD Radeon GPU to save power?
2) Does the Thunderbolt port allow you to use an external monitor?
3) What is the battery life under Ubuntu? (describe your usage)
Some more 'advanced' questions:
4) Is the quadcore benificial for running full disk encryption (due to the extended AES in Intel's 2.2 i7 cpu)?
5) What kind of IO throughput do you get with and without full disk encryption (please describe if you use SSD or HD incl RPM)
6) Can you tell me the exact type of Broadcom wireless chip used for wifi?
I downloaded the current F12 DVD iso on my macbook to install on my Dell 450 Intel Xeon 3.00GHz, but I cant figure out how to verify the download. The Fedoraproject/en/verify does not mention mac, and the command is not working in the mac terminal.
View 6 Replies View RelatedI tried to install Fedora 13 on my MacBook Pro 13" but I get the following error:
The exact procedure is as follows:
- Boot from CD
- Start Live CD menu
- During loading live CD I get this error:
"ata 2: COMRESET failed (errno=-16)"
"ata 1: COMRESET failed (errno=-16)"
- The loading continues..
- At the end I get:
"No root device found"
"Boot has failed, sleeping forever"
I can't seem to get the sound working on my MacbookPro with Fedora 15. I tried the old options hda-intel-sound model-mbp55
Code:
[brad@bmp modprobe.d]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
[code]....
I have the Fedora 14 64bit Live CD on a 4GB USB Flash drive, via Live-USB-Creator. I have bootcamp installed on my Macbook Pro (5,5) with OSX, Windows 7, and Ubuntu already installed. I plan to install Fedora over the Ubuntu.
1.)So, when refit boots up, I choose the EFI USB (Fedora) and the Fedora screen comes up.
2.) I click any key to dismiss the auto boot
3.) I click "e" to edit the Fedora kernel, then I edit the first option and add the line "nomodeset"
4.) I press enter, and then "b" to boot that line. The screen kind of goes whack and a fair amount of super small (unreadable) text comes up on the screen and then just hangs with the blinking (_)
If I go into Grub via "c", and type in "nomodeset" it gives me an Error 27 Unrecognized command. And I've read online to press TAB to go into grub, but TAB does nothing for me.
I have installed grub.efi in the ESP partition which is able to load ubuntu 9.04.I think it works with fedora 11 x64 as well. And I tried to install fedora in the partition which was used to install ubuntu. But the installer keep telling me that ext4 partitions are not bootable. But I don't need to install a boot loader on that partition
View 4 Replies View RelatedI am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
FC13 and Ubuntu 10.04 - both 64bit. Hardware: MBP 5,4 Here's how I do the install:
1. Boot to Ubuntu LiveCD and wipe disk.
2. Create a msdos partition table via gparted
3. Reboot from FC13 or Ubuntu install disk and continue to install with installer suggested partition scheme.
4. Reboot and get an error that says "uncompression error -- System halted"
Variation that I have tried:
1. After #3, boot into FC13 or Ubuntu rescue mode, chroot to hd image and run:
# grub
> root (hd0,0)
> setup (hd0)
> quit
2. Create a 250MB partition where I installed refit and use rest of the disk for Ubuntu or FC13. After installation, both Ubuntu and FC13 halt at the same error.
3. gptsync fails with no refit installed. Finds GPT table empty. LiveCDs from both distros work fine so ruling out hardware issues like bad memory etc.
[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
i use synaptic manager to get the updates. I tried to get the required plugins like gstreamer 0.10 plugins bad. I downloads the all the required files but at last it show the following
E: Internal Error, Could not perform immediate configuration (2) on mountall
I just installed Ubuntu 10.10 32-bit on my laptop and successfully completed the installation. However, I attempted to install the recommended updates but have been unsuccessful. The updates downloaded just fine, but when I attempt to install the downloaded updates, I get a package operation failed with the following text: installArchives() failed: Extracting templates from packages: 10% Extracting templates from packages: 21% Extracting templates from packages: 32% Extracting templates from packages: 43% Extracting templates from packages: 54% Extracting templates from packages: 65% Extracting templates from packages: 76% Extracting templates from packages: 87% Extracting templates from packages: 98% Extracting templates from packages: 100% Preconfiguring packages.
View 2 Replies View RelatedCan one perform an installation of CentOS 5 (5.4) so that the system is up-to-date at the time of the first boot (i.e. Anaconda will pull and install the 'latest' versions of the packages directly, and the user needn't run `yum update` | `yum upgrade` after the system has been installed)?
If this is doable at all, is it possible to accomplish without making use of a personally custom-crafted-and-hosted repository (i.e. can one of the official CentOS mirrors be used)?
Also, I'm not talking about creating an install DVD containing the latest versions of the packages, but rather, if the netinstall media can be used to perform this particular type of installation.
Get message: "database disk image is malformed"
View 2 Replies View RelatedI have been having trouble installing packages. Every package I try to install gives me the same error - Quote: E: Could not perform immediate configuration on 'libattr1'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2)
I have tried Synaptic, the Update Manager, apt-get, and aptitude. I noticed that someone has filed a bug report on launchpad (link), for seemingly the same reason, and so far there hasn't been any changes made.
i recently got a server and it was going fantastically well, but just recently when i tried installing something using apt-get install .... ( i tried irssi, firefox/iceweseal, tightvncserver) it downloads asks for a questions i press y for yess then i get this error E: Internal Error, Could not perform immediate configuration (2) on mountall and then it doesnt install, this is really frustrating.
View 9 Replies View RelatedI'm trying to perform a VPN lan to lan IPSEC connection. By my side, I have a server with 2 IP's, i.j.k.l (destined to act as a VPN gateway) and i.j.k.m (the server). I am a newbie. I don't know if this configuration is normal, but it's forced by our partner.
My configuration is:
OS: Fedora release 7 (Moonshine)
OpenSWAN version: Linux Openswan U2.4.7/K2.6.23.17-88.fc7 (netkey)
ipsec.conf
# /etc/ipsec.conf - Openswan IPsec configuration file
#
# Manual: ipsec.conf.5
[Code]...
This is a general technical question about Symmetric Multiprocessing in relation to the Intel Core i7. (Actually, it's more about Hyperthreading than i7.) My understanding is that Symmetric Multiprocessing means that the operating system treats all processors as identical, and therefore it can assign a new thread to any free processor.
And that i7 appears to the OS as 8 processors, 0 thru 7. But from a performance perspective, the 8 processors are not identical, because each core has 1 execution engine plus the ability to store the state of 2 threads. This is, as far as I understand it, the essence of Intel's Hyperthreading. So each execution engine can quickly switch between 2 threads without bothering the OS, but only one thread at a time actually executes.
Suppose, for example, all processors are idle and the OS assigns one thread to processor 0, then has a second thread to assign. Since all free processors are considered identical, the OS could assign the second thread to any free processor, say 1. The result would be that both threads are competing for the same execution engine, while the other 3 cores remain idle. Is my understanding of SMP correct?
If so, does linux SMP take full advantage of Intel Hyperthreading (which existed also in earlier Intel processors)? That is, does linux SMP assign threads in such a way that it attempts to choose an idle execution engine? I don't know what algorithm SMP actually uses to choose the processor. For example, it could be the first free processor, or any free processor chosen at random.How about Windows? How does it handle the situation?
Edit: I have also posted this question in linuxforums and phoronix forums. I hope this doesn't count as cross-posting, since those forums are not on this site and they have different readership. If it is indeed cross-posting, please let me know and I will avoid doing it in future.
I have got fedora 13 install on my system. I wanted to know how could I perform scandisk and defragmentation like operations in linux?
View 5 Replies View RelatedI have Fedora-13-i386-DVD.torrent download on;
Fedora Project Bittorrent Tracker [URL]
Finally the package folder downloaded;
$ cd Fedora-13-i386-DVD
$ ls
Code:
Fedora-13-i386-CHECKSUM Fedora-13-i386-DVD.iso
[Code]....
Where I can find sha256sum value for installation .iso file of fedora 8 and same others version of fedora
View 2 Replies View Relatedi have installed "php" by su - "yum install php"..When i try to test my installation,by creating a php script using the line <?php phpinfo(); ?> and asving it in the .php way.But when i try to open it via my Firefox browser .. it is not showing as intended.!! what went wrong i don't know!Please guide me!Hi i have installed LAMP on my Pc by following the instruction in this link "http://www.unixmen.com/linux-distributions/7-fedora/1284-how-to-install-lamp-in-fedora14-". But after installing php ad when i try to test, it just showing phpinfo();, what will be the problem ?
View 6 Replies View RelatedI have a number of bash scripts I wrote to perform chores. Despite that the very first line in all of them is "#!/bin/bash", I have to actually type "bash {scriptname}" to run them. Am I expecting too much and should be happy with this, or what do I need to do to be able to just type the script name to run it? It's no emergency, just makes my brain wonder.
View 4 Replies View RelatedEverything works well when executing:
Code:
sudo apt-get update
sudo apt-get upgrade
When executingsudo apt-get dist-upgrade
I get this
[Code]...
I upgraded my main workstation from 10.4 to 10.10 yesterday and was a little concerned that a kept seeing the upgrade software perform the same step of generating grub.cfg over and over. I went back to the logs and I counted nine (9!) repetitions of this same task
View 4 Replies View RelatedI'm trying to figure out how to perform a minimal install to a USB attached hard drive. A full install works just fine, when I start the install from the LiveCD desktop, all the USB drives are visible and can be installed to. In the minimal install, the requisite kernel modules for USB storage don't seem to be loaded, therefore, my USB hard drive is not visible and cannot be mounted, partitioned, or installed to.
The reason behind this is I'm trying to build an XBMC install on a USB hard drive and want only the minimum backend OS that's necessary as some of the Ubuntu desktop software causes issues with some of the XBMC software. I've posted on the XBMC boards about this, but my questions have gone completely unanswered,
Could not download all repository indexes.The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.and therefore i am unable to perform many tasks.this is a clean install of 9.10 on a brand new laptop
View 5 Replies View RelatedI would like to create an unattended install ubuntu 10.10 cd. I have followed the ubuntu [URL].. on creating the preseed file, however, I can't find any useful tutorial on how to set the kernel parameters to perform an unattended install using my preseed file.
View 1 Replies View RelatedI want to install Ubuntu but not as Dual-Boot (Other OS is Windows XP x64 edition).
Does Wubi perform significantly better than an Ubuntu version installed on VMWare or VirtualBox?
My computer has:Intel Core2 Quad Q8200 @ 2.33GHz. 4GB RAM. An almost empty 450GB HD (defragmented)
Just to reiterate on the title, the installation of Fedora 10 i386 (DVD) on a 32bit PC. Is failing on me after the media check (whether or not I do it), so not even making it to the language selection. Currently running a nvidia AGP video card was previously using an ati PCI card but swapping has done little to help.
The only argument that lets me passed this point is noprobe, which then fails a bit later as it can't pick up the install media. I've also tried a live CD which seems to be a bit hit and miss as to whether or not it even loads. It then either fails to even let me run the install to HDD or it comes up some error about failures in python code (Don't have the exact error as the last few times haven't even booted). Below is a couple of errors I get from the standard installer
[Code].....